EPIC_APP Error on Startup
I used the Adobe 8 Customization Wizard to create a transform for our college so that I can get a silent install with the Serial No. pre populated. I used the files I received via the FTP site for the Opt-out option. The install is pushed via Zenworks without error. Every time I run the app though after about 5 seconds I get an EPIC_APP error and it closes. I keep thinking it has something to do with the Opt-Out, but that is just a guess. I checked the XML file and the one on the hard drive seems to be the correct one.
If I manually install via setup.exe everything seems to work just fine, but pushing via Zenworks with only the acropro.msi has worked before in previous versions. The push I created for Reader 8 works with no problems whatever.
The exact same problem existed for Symantec, leading me to believe that there is more than one connection between the licensing and installation procedures of Acrobat and other Adobe products and Symantec products.
Allowing Adobe code to operate outside of a protected environment periodically permits short-term use. However, over the space of two weeks (and seven weeks or so for Symantec), these programs did not run without licensing problems no matter how many licenses I own.
I run Vista 64 bit, and originally excluded both DEP and UAC in order to complete the Acrobat 8 installation after getting my first EPIC license error. The error did not include until I tried a trial version of CS3.
I signed off of another forum because I thought I had cured the problem, but am again getting the same EPIC error due to other factors.
This should be approached much more directly with Adobe, and hopefully some of you have done so. Unfortunately, the response of Symantec support was eventually to give me some of my money back. While there are many other security solutions, including some interesting beta solutions, I cannot give up Acrobat 8.
Incredibly, despite the fact that these problems are clearly licensing based problems, one response to this issue was that licensing was too complex and most did not understand it. I believe that licensing is the bedrock of this problem, and that the software used by two or more software vendors is not doing the right job, violating everyone's licensed rights.
Similar Messages
-
Fan error at startup in ibm thinkpad t42
i always get fan error at startup in my ibm thinkpad t42 since 1 week. i press esc key at error and that is the only way my system startup. its not in warranty and will like to try to fix it on my own. please help. i am worried
Try bblowing some air into the fan lover when the system is off. Then turn the system on and put your hand at the louver to see if it blows air. If this doesnt work, run PC doctor for DOS ( available at http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-56222) and check the problem. If this doesnt work either, replace the fan.
-
Error on startup QuickTime and iTunes: (Windows XP Pro SP2)
EventType : BEX P1 : QuickTimePlayer.exe P2 : 7.4.1.14 P3 : 47a28143
P4 : QuickTimePlayer.exe P5 : 7.4.1.14 P6 : 47a28143 P7 : 0000130d
P8 : c0000409 P9 : 00000000What worked for me w/ the 2096 error:
After removing every trace of itunes & QT, I installed QT 7.2 and made sure QT worked.
I installed a Feb version of itunes (7.6.1.9) because I was not willing to waste any more time. **Make sure that you deselect the 3rd checkbox that says it will update other Apple software (incl QT). That was the mistake made over and over and over (and over)!
Now that my ipod is charged, I may try to install the newest itunes as long as I don't let QT update. I don't use QT so I don't care if I'm using a 2007 version. -
My note book ( Pavilion G series) displays a fan error on startup .
My note book ( Pavilion G series) displays a fan error on startup and fails to boot unless I press Enter. The cooling fan is not working. What to do. i purchased it just a month back. i am using windows 7.
Hi,
Are you talking about the whole computer or just its fan (1 month old) ? Please contact HP directly to get help:
http://www8.hp.com/us/en/hp-information/summary/ww-contact-us.html
http://welcome.hp.com/country/w1/en/support.html
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
HP P6203W CPU fan error on startup windows 7 32bit system
Hi there guys !
I got this HP computer for about a year now and since changing my broken CPU fan i got a CPU fan error on startup.
I have got a HP P6203W
MOBO: Pegatron Narra5
Bios: phoenix technologies 5.55 12/08/2009
I wanted to reduce some noise from my computer by replacing the CPU fan,
so i changed the original fan for a Noiseblocker-Multiframe M8-S1.
Now when i start up the computer; the fan slowly turns around , and i then got an CPU fan error before windows fired up. I can get past it by pressing F2 but its annoying to do so every time i start up. Plus I don't think the fan is turning fast enough.
I already tried checking cpu fan settings in the bios, but i have the blocked bios.
No fan settings here.
Do one of you guys have any clue about how to get my CPU fan working properly again or maybe a bios update for my motherboard ?
Any help would be very much appreciated !
thanks for your timeHello willibrord87,
There isn't a BIOS update available for your motherboard so that is not going to be an option.
On some BIOS you have the ability to disable the system from checking the CPU Fan to avoid the error. If it's there it would be under Advanced menu and then a sub menu called Hardware Monitor. HP like many manufacturers lock out settings to avoid users changing settings to much in the BIOS so the system may not have the option. Since you said you already checked the settings I'm assuming we can skip this.
So it brings us to the motherboard. The CPU fan plug on the motherboard is a 12v connector, the Noiseblocker you have starts a slow ramp up based on this link http://goo.gl/6jsgn it says it's a start voltage of only 5v. I'm thinking that since the CPU fan is not starting up quick enough the motherboard is failing out and giving the CPU fan error. In the end the error is not a real error because once the CPU fan actually works then it's good to go.
You may want to try a different CPU fan that has a quicker spin up, or at least move that CPU fan to another system to see if it exhibits the same slow spin up.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical. -
Character set error during startup
Hi all
This is a follow up of the following problem: Paralel Install of Ora8i and Ora9i
Please read it before continue.
This seems to be a database problem, so that I post it here:
I'm going forward with my problem. It seems that's a problem with versions in the startup routine. When I try to start the instances with the 9i dbstart tool, all is going well.
Now I changed the oracle script in /etc/init.d in a was that it will explicitly start the 9i dbstart tool. Now the instances come up normally, except the following error during mount of the instance:
ORA-12709: error while loading create database character set.
For me it looks like an mistaken during the creation of the database. Or perhaps its again a version problem.
Any clue around for this?
Greetings
SalvatoreOk Here the answers:
1) Error during startup
2) Error during startup
3) Error during startup
The Oracle Environment seems to be OK. I can use all variables in the oracle script during OS boot.
I suspect that something is going wrong during the database creation. But in the Oracle Error Message Documentation I read "contact Support Services". So I'm unsure what to do. AFAIK we don't have a support contract, nor I can use any paid service. -
Visual C++ runtime error on startup audition cs5.5 win8.1
After reinstalling Audition cs5.5, I get a visual C++ runtime error at startup. I have never had a problem before on a reinstallation. I have tried uninstall and reinstall without any success. Is their a version of Visual C++ that is needed here? Is this an incompatibility problem with Win 8.1? Has anyone else had this problem? I haven't had any luck in the FAQ section.
The only issues I've ever heard about involving this appear to have been caused by having too many versions of the run-time on a machine. I'm not entirely sure what the situation with software only running properly with the version it was intended to is, but apparently clearing out older versions (you can check this out and remove them if you want using the normal uninstall routine) has fixed this particular problem on at least one occasion. It's worth investigating, anyway.
-
Error on startup - where do we send these things??
JniPortal for C:\Program Files\Oracle\JDeveloper 3.2\java1.2\jre\bin\OJVM\jvm.dll reported
java.lang.NullPointerException
java.lang.ExceptionInInitializerError: java.lang.NullPointerException
void borland.jbuilder.wizard.treatastext.TreatAsTextWizard.startup(borland.jbuilder.addin.IdeEnvironment)
void borland.jbuilder.addin.impl.AddinManager.$SQ()
void borland.jbuilder.addin.impl.AddinManager.start()
void borland.jbuilder.addin.impl.AddinManagerIdeInterface.start()
void borland.jbuilder.addin.impl.IAddinManager_JavaDispatch.invoke(int, borland.javaport.JavaCallStack)
nullI've also encountered the same error on startup. The next time I started JDeveloper it was fine..
JniPortal for C:\oracle\JDeveloper 3.2\java1.2\jre\bin\OJVM\jvm.dll reported
java.lang.NullPointerException
java.lang.ExceptionInInitializerError: java.lang.NullPointerException
void borland.jbuilder.wizard.treatastext.TreatAsTextWizard.startup(borland.jbuilder.addin.IdeEnvironment)
void borland.jbuilder.addin.impl.AddinManager.$SQ()
void borland.jbuilder.addin.impl.AddinManager.start()
void borland.jbuilder.addin.impl.AddinManagerIdeInterface.start()
void borland.jbuilder.addin.impl.IAddinManager_JavaDispatch.invoke(int, borland.javaport.JavaCallStack)
null -
Error on startup "dynamiclink manager has stopped working" CS6
So I bought the CS6 master collection, but keep on getting an error on startup of my programs. When I open After effects, Photoshop, Premier Pro, Audition, etc... I get the error "Dynamiclinkmanager has stopped working". The message appears on start up of the program, and the only way to get in is to keep on pressing "close the program" for few min until it loads. It is very annoying and takes forever to open a program. I've already tried uninstalling and re-installing, and that hasn't worked. Here are a few screenshots of the error:
And here is what it says when you select "view problem details" :
"Problem signature:
Problem Event Name: APPCRASH
Application Name: dynamiclinkmanager.exe
Application Version: 6.0.0.0
Application Timestamp: 4f44797c
Fault Module Name: cwalsp.dll
Fault Module Version: 2.8.13.1
Fault Module Timestamp: 5216c630
Exception Code: c0000005
Exception Offset: 00017914
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789"
Tech specs of my laptop:
Windows 7 Professional
Intel core 2 duo processor
8 gig RAM
64-bit Operating System
I have no idea how to fix this and it's driving me CRAZY.
Thanks,
SpencerHad the same problem with conflict between CS6 (Photoshop, Premier, After Effects, etc.] and Net Nanny. Solution was as follows:
1. Log onto Net Nanny Admin Tools
2. Click on Application Exceptions
3. Click Add
4. Browse to folder containing "dynamiclinkmanager.exe". On my computer (Windows 7 Pro) it was located in
C:\Program Files (x86)\Common Files\Adobe\dynamiclink\CS6
[I do have dynamiclinkmanager.exe elsewhere, but Net Nanny only allows you to identify a given file name once]
5. Select dynamiclinkmanger.exe, Open, OK
6. Repeat steps 3 to 5 but this time for "dynamiclinkmediaserver.exe" which I found in
C:\Program Files (x86)\Common Files\Adobe\dynamiclinkmediaserver\1.0
7. Click OK to accept application exceptions
8. Exit Net Nanny Admin Tools
7. On my computer Photoshop would now load without incident, but if necessary reboot.
NOTE: Once I solved the dynamiclinkmanager stopped problem I then encountered an Adobe Media Core stopped problem when I started After Effects and Premier. To resolve this second problem with Net Nanny I repeated the above steps adding the following application exception:
"Adobe QT32 Server.exe"
which I found in
C:\Program Files (x86)\Common Files\Adobe\dynamiclinkmediaserver\1.0
[Again there are multiple copies of "Adobe QT32 Server.exe" but Net Nanny accepts only one, and I selected the one in "Program Files (x86)" and not the ones in "Program Files" because of this is where I also found dynamiclinkmanager.exe. All works fine now.]
Hope this works for you. -
Hi!
I am getting the error:
"The startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS Extended (Jounraled) volume or already partitioned by Boot Camp Assistant for installing Windows."
I read up some on google, but all of them says that they have crated a partition and that is the problem, I only have the standard "Macintosh HD".
I tried to create a partition manually in disk utility but then the error message: "Partition failed with error message: Could not unmount disk."
Can anyone help me? It's driving me crazy.
Thanks.This message, and threads like yours got asked daily for over two years, now it is only a couple times a week!!
Is it so hard to follow through? you were to have backup already, clones are best, then erase/format and restore.
Then partition.
Some have been able to use Disk Utility booted from OS X DVD or another drive, and repair the drive.
You have to use Boot Camp Assistant (99.9% anyway) to create and achieve a proper Windows Master Boot Record partition. -
[bug-report] AI CC for Mac got "loading plugin error" at startup
Enviornment: 2012 late Mac Mini, OSX 10.8.6( English )
Just fresh installed adobe illustrator cc for Mac(Simplified Chinese), which is got "loading plugin error" at startup, even update AI or reinstall it after using adobe cc clean tool.
Finally I found it will be solved by selecting default lanugauge (North America English) at installer. Then I changed my OSX language to S Chinese then installed S_Chinese version AI CC that works without problem.
So, it shows AI got some language compatiabitily bug which is not happen on PS and InDesign (I installed Simplified Chinese version of both them on my english OSX without error)
Plz fix it in next version. Thanks so much.Can you give this a try, that is try using a seperate boss?
DECLARE_PMID(kClassIDSpace, kIDCStartupShutdownServiceBoss, kIDCPrefix + 10)
Class
kIDCStartupShutdownServiceBoss,
kInvalidClass,
// Implementation of IStartupShutdownService
IID_ISTARTUPSHUTDOWN, kIDCStartupShutdownImpl,
// Implementation to IK2ServiceProvider to identify the service type as startup-shutdown
IID_IK2SERVICEPROVIDER, kLazyStartupShutdownProviderImpl, -
Hello,
Please note, I could not fit the entire post in one entry...had to do it in 3
I am getting numerous errors on startup of the weblogic server. Given that I followed the instructions to a T (Quick Start Guide for Oracle® SOA Suite 11gR1 (11.1.1.5.0)) . I am on windows 7.
(and even installed and re-installed weblogic several times), and re-created the domains it is just a little frustrating that SOA doesn't work right out of the box.
Near the end of the log file it does say
SOA Platform is running and accepting requests
However, just below it says:
line 6:12 mismatched character '<EOF>' expecting '"'
line 3:12 mismatched character '<EOF>' expecting '"'
And above throughout there are a huge number of warnings.
<Sep 29, 2012 7:13:16 PM EDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'B2BInstanceMessageBean', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BInstanceMessageLocalHome was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Sep 29, 2012 7:13:37 PM EDT> <Warning> <oracle.dms.collector> <BEA-000000> <Metric table "domain_oracle_oim:jdbc" has no key column. It will not be collected.
What is going wrong?
Thank you for your help.
Stuart
Edited by: Stuart Fleming on Sep 29, 2012 4:33 PMTHE LOG:
JAVA_OPTIONS= -Xverify:none
** End SOA Specific environment setup for win.
JAVA Memory arguments: -Xms512m -Xmx1024m -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\SoaWLS\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\SoaWLS\Oracle_SOA1\soa\modules\user-patch.jar;C:\SoaWLS\Oracle_SOA1\soa\modules\soa-startup.jar;;C:\SoaWLS\patch_wls1036\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\SoaWLS\patch_ocp371\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\SoaWLS\JDK160~1\lib\tools.jar;C:\SoaWLS\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\SoaWLS\WLSERV~1.3\server\lib\weblogic.jar;C:\SoaWLS\modules\features\weblogic.server.modules_10.3.6.0.jar;C:\SoaWLS\WLSERV~1.3\server\lib\w
1/lib/ant-all.jar;C:\SoaWLS\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\SoaWLS\ORACLE~1\soa\modules\commons-cli-1.1.jar;C:\SoaWLS\ORACLE~1\soa\modules\oracle.soa.mgmt_11.1.1\soa-infra-mgmt.jar;C:\SoaWLS\Oracle_SOA1\soa\modules\oracle.soa.common.adapters_11.1.1\oracle.soa.common.adapters.jar;C:\SoaWLS\Oracle_SOA1\communications\modules\usermessaging-config_11.1.1.jar;C:\SoaWLS\ORACLE~1\modules\oracle.xdk_11.1.0\xsu12.jar;C:\SoaWLS\modules\features\weblogic.server.modules.xquery_10.3.1.0.jar;C:\SoaWLS\Oracle_SOA1\soa\modules\db2jcc4.jar;C:\SoaWLS\USER_P~
WLS\Oracle_SOA1\soa\modules\fabric-url-handler_11.1.1.jar;C:\SoaWLS\Oracle_SOA1\soa\modules\quartz-all-1.6.5.jar;C:\SoaWLS\Oracle_SOA1\soa\modules\oracle.soa.fabric_11.1.1\oracle.soa.fabric.jar;C:\SoaWLS\Oracle_SOA1\soa\modules\oracle.soa.fabric_11.1.1\fabric-runtime-ext-wls.jar;C:\SoaWLS\Oracle_SOA1\soa\modules\oracle.soa.adapter_11.1.1\oracle.soa.adapter.jar;C:\SoaWLS\Oracle_SOA1\soa\modules\oracle.soa.b2b_11.1.1\oracle.soa.b2b.jar;C:\SoaWLS\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\SoaWLS\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\SoaWLS\WLS
PATH=C:\SoaWLS\patch_wls1036\profiles\default\native;C:\SoaWLS\patch_ocp371\profiles\default\native;C:\SoaWLS\WLSERV~1.3\server\native\win\32;C:\SoaWLS\WLSERV~1.3\server\bin;C:\SoaWLS\modules\ORGAPA~1.1\bin;C:\SoaWLS\JDK160~1\jre\bin;C:\SoaWLS\JDK160~1\bin;C:\app\stuart\product\11.2.0\dbhome_1\BIN;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Li
ologies\ATI.ACE\Core-Static;C:\SoaWLS\WLSERV~1.3\server\native\win\32\oci920_8;C:\SoaWLS\Oracle_SOA1\soa\thirdparty\edifecs\XEngine\bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Java HotSpot(TM) Client VM (build 20.4-b02, mixed mode)
Starting WLS with line:
C:\SoaWLS\JDK160~1\bin\java -client -Xms512m -Xmx1024m -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer -Djava.security.policy=C:\SoaWLS\WLSERV~1.3\server\lib\weblogic.policy -Xverify:none -da -Dplatform.home=C:\SoaWLS\WLSERV~1.3 -Dwls.home=C:\SoaWLS\WLSERV~1.3\server -Dweblogic.home=C:\SoaWLS\WLSERV~1.3\server -Dcommon.components.home=C:\SoaWLS\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\SoaWLS\USER_P~1\domains\BASE_D~1 -Djrockit.optfile=C:\SoaWLS\OR
ptfile.txt -Doracle.server.config.dir=C:\SoaWLS\USER_P~1\domains\BASE_D~1\config\FMWCON~1\servers\AdminServer -Doracle.domain.config.dir=C:\SoaWLS\USER_P~1\domains\BASE_D~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\SoaWLS\USER_P~1\domains\BASE_D~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\SoaWLS\USER_P~1\domains\BASE_D~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\SoaWLS\USER_P~1\domains\BASE_D~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\SoaWLS\USER_P~1\domains\BASE_D~1\servers\AdminServer\tmp\_WL_user
ternateTypesDirectory=C:\SoaWLS\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\SoaWLS\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol"|"oracle.fabric.common.classloaderurl.handler"|"oracle.fabric.common.uddiurl.handler"|"oracle.bpm.io.fs.protocol -Dweblogic.jdbc.remoteEnabled=false -da:org.apache.xmlbeans... -Dsoa.archives.dir=C:\SoaWLS\Oracle_SOA1\soa -Dsoa.oracle.home=C:\SoaWLS\Oracle_SOA1 -Dsoa.instance.home=C:\SoaWLS\USER_P~1\domains\BASE_D~1 -Dtangosol.coherence.clusteraddress=227.7.7.9 -Dtangosol.coher
.log=jdk -Djavax.xml.soap.MessageFactory=oracle.j2ee.ws.saaj.soap.MessageFactoryImpl -Dweblogic.transaction.blocking.commit=true -Dweblogic.transaction.blocking.rollback=true -Djavax.net.ssl.trustStore=C:\SoaWLS\WLSERV~1.3\server\lib\DemoTrust.jks -Dem.oracle.home=C:\SoaWLS\oracle_common -Djava.awt.headless=true -Dums.oracle.home=C:\SoaWLS\Oracle_SOA1 -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\SoaWLS\patch_wls1036\profiles\default\sysext_manifest_classpath;C:\SoaWLS\patch
lasspath weblogic.Server
<Sep 29, 2012 7:11:09 PM EDT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Sep 29, 2012 7:11:09 PM EDT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Sep 29, 2012 7:11:10 PM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 20.4-b02 from Sun Microsystems Inc.>
<Sep 29, 2012 7:11:11 PM EDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<Sep 29, 2012 7:11:15 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Sep 29, 2012 7:11:15 PM EDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Sep 29, 2012 7:11:15 PM EDT> <Notice> <Log Management> <BEA-170019> <The server log file C:\SoaWLS\user_projects\domains\base_domain\servers\AdminServer\logs\AdminServer.log is opened. All server side log events will be written to this file.>
<Sep 29, 2012 7:11:23 PM EDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Sep 29, 2012 7:11:28 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Sep 29, 2012 7:11:28 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Sep 29, 2012 7:12:05 PM EDT> <Warning> <J2EE> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.applcore.model, Specification-Version: 0.1, Implementation-Version: 11.1.1.0.0, referenced from: C:\SoaWLS\user_projects\domains\base_domain\servers\AdminServer\tmp\_WL_user\usermessagingserver\a7bt7z]. Make sure the referenced optional package has been deployed as a library.>
<Sep 29, 2012 7:12:07 PM EDT> <Warning> <EJB> <BEA-015036> <In the EJB MessageReceiverBean(Application: usermessagingserver, EJBComponent: sdpmessagingengine.jar), the value for the activation config property 'connectionFactoryJNDIName' will be ignored since it is overridden with the value 'OraSDPM/QueueConnectionFactory';>
<Sep 29, 2012 7:12:09 PM EDT> <Warning> <EJB> <BEA-015036> <In the EJB MessageDispatcherBean(Application: usermessagingserver, EJBComponent: sdpmessagingclient-ejb-parlayx.jar), the value for the activation config property 'connectionFactoryJNDIName' will be ignored since it is overridden with the value 'OraSDPM/QueueConnectionFactory';>
<Sep 29, 2012 7:12:14 PM EDT> <Warning> <Connector> <BEA-190110> <Resource Adapter is calling BootstrapContext.createTimer() and allocating a Timer Thread that is not managed by WebLogic Server. This may adversely impact the performance/operation of WebLogic Server.>
<Sep 29, 2012 7:12:14 PM EDT> <Warning> <EJB> <BEA-015036> <In the EJB DriverDispatcherBean(Application: usermessagingdriver-email, EJBComponent: sdpmessagingdriver-dispatcher-ejb.jar), the value for the activation config property 'connectionFactoryJNDIName' will be ignored since it is overridden with the value 'OraSDPM/QueueConnectionFactory';>
<Sep 29, 2012 7:12:16 PM EDT> <Warning> <J2EE> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.applcore.model, Specification-Version: 0.1, Implementation-Version: 11.1.1.0.0, referenced from: C:\SoaWLS\user_projects\domains\base_domain\servers\AdminServer\tmp\_WL_user\worklistapp\os6mg5]. Make sure the referenced optional package has been deployed as a library.>
<Sep 29, 2012 7:12:16 PM EDT> <Warning> <Diagnostics> <BEA-320131> <Instrumentation module worklistapp is configured, but disabled because a WLDF system resource is not targeted to the server, or its instrumentation component is not enabled.>
<Sep 29, 2012 7:12:29 PM EDT> <Warning> <oracle.sdp.messaging.driver.base> <SDP-26024> <Registration of driver Email-Driver did not complete; will retry periodically until messaging server responds.>
<Sep 29, 2012 7:12:41 PM EDT> <Warning> <J2EE> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: custom.client.applib, Specification-Version: 1, Implementation-Version: 1.0, referenced from: C:\SoaWLS\user_projects\domains\base_domain\servers\AdminServer\tmp\_WL_user\worklistapp\mim36q\war]. Make sure the referenced optional package has been deployed as a library.>
<Sep 29, 2012 7:12:49 PM EDT> <Warning> <J2EE> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.soa.apps, Specification-Version: 11.1.1, Implementation-Version: 11.1.1, referenced from: C:\SoaWLS\user_projects\domains\base_domain\servers\AdminServer\tmp\_WL_user\soa-infra\p8vrj9]. Make sure the referenced optional package has been deployed as a library.>
<Sep 29, 2012 7:12:55 PM EDT> <Warning> <EclipseLink> <BEA-2005000> <2012-09-29 19:12:55.815--ServerSession(32310194)--You have specified multiple ids for the entity class [oracle.bpm.analytics.cube.persistence.model.CubeProcessPerformance] without specifying an @IdClass. By doing this you may lose the ability to find by identity, distributed cache support etc. Note: You may however use entity manager find operations by passing a list of primary key fields. Else, you will have to use JPQL queries to read your entities. For other id options see @Primary
<Sep 29, 2012 7:12:55 PM EDT> <Warning> <EclipseLink> <BEA-2005000> <2012-09-29 19:12:55.815--ServerSession(32310194)--You have specified multiple ids for the entity class [oracle.bpm.analytics.cube.persistence.model.CubePartnerService] without specifying an @IdClass. By doing this you may lose the ability to find by identity, distributed cache support etc. Note: You may however use entity manager find operations by passing a list of primary key fields. Else, you will have to use JPQL queries to read your entities. For other id options see @PrimaryKey.
<Sep 29, 2012 7:12:55 PM EDT> <Warning> <EclipseLink> <BEA-2005000> <2012-09-29 19:12:55.83--ServerSession(32310194)--You have specified multiple ids for the entity class [oracle.bpm.analytics.cube.persistence.model.CubeAuditInstanceFlex01] without specifying an @IdClass. By doing this you may lose the ability to find by identity, distributed cache support etc. Note: You may however use entity manager find operations by passing a list of primary key fields. Else, you will have to use JPQL queries to read your entities. For other id options see @Primary
<Sep 29, 2012 7:12:55 PM EDT> <Warning> <EclipseLink> <BEA-2005000> <2012-09-29 19:12:55.83--ServerSession(32310194)--You have specified multiple ids for the entity class [oracle.bpm.analytics.cube.persistence.model.CubeActivityProperty] without specifying an @IdClass. By doing this you may lose the ability to find by identity, distributed cache support etc. Note: You may however use entity manager find operations by passing a list of primary key fields. Else, you will have to use JPQL queries to read your entities. For other id options see @PrimaryKey
<Sep 29, 2012 7:12:55 PM EDT> <Warning> <EclipseLink> <BEA-2005000> <2012-09-29 19:12:55.83--ServerSession(32310194)--You have specified multiple ids for the entity class [oracle.bpm.analytics.simulation.persistence.model.RoundTripInstanceCreation] without specifying an @IdClass. By doing this you may lose the ability to find by identity, distributed cache support etc. Note: You may however use entity manager find operations by passing a list of primary key fields. Else, you will have to use JPQL queries to read your entities. For other id options see
<Sep 29, 2012 7:12:55 PM EDT> <Warning> <EclipseLink> <BEA-2005000> <2012-09-29 19:12:55.846--ServerSession(32310194)--You have specified multiple ids for the entity class [oracle.bpm.analytics.cube.persistence.model.CubeActivitySequenceFlow] without specifying an @IdClass. By doing this you may lose the ability to find by identity, distributed cache support etc. Note: You may however use entity manager find operations by passing a list of primary key fields. Else, you will have to use JPQL queries to read your entities. For other id options see @Prima
<Sep 29, 2012 7:12:55 PM EDT> <Warning> <EclipseLink> <BEA-2005000> <2012-09-29 19:12:55.861--ServerSession(32310194)--You have specified multiple ids for the entity class [oracle.bpm.analytics.cube.persistence.model.CubeNametab] without specifying an @IdClass. By doing this you may lose the ability to find by identity, distributed cache support etc. Note: You may however use entity manager find operations by passing a list of primary key fields. Else, you will have to use JPQL queries to read your entities. For other id options see @PrimaryKey.>
<Sep 29, 2012 7:12:55 PM EDT> <Warning> <EclipseLink> <BEA-2005000> <2012-09-29 19:12:55.877--ServerSession(32310194)--You have specified multiple ids for the entity class [oracle.bpm.analytics.cube.persistence.model.CubeTaskPerformance] without specifying an @IdClass. By doing this you may lose the ability to find by identity, distributed cache support etc. Note: You may however use entity manager find operations by passing a list of primary key fields. Else, you will have to use JPQL queries to read your entities. For other id options see @PrimaryKey
<Sep 29, 2012 7:12:55 PM EDT> <Warning> <EclipseLink> <BEA-2005000> <2012-09-29 19:12:55.877--ServerSession(32310194)--You have specified multiple ids for the entity class [oracle.bpm.analytics.cube.persistence.model.CubeWorkload] without specifying an @IdClass. By doing this you may lose the ability to find by identity, distributed cache support etc. Note: You may however use entity manager find operations by passing a list of primary key fields. Else, you will have to use JPQL queries to read your entities. For other id options see @PrimaryKey.>
<Sep 29, 2012 7:12:55 PM EDT> <Warning> <EclipseLink> <BEA-2005000> <2012-09-29 19:12:55.893--ServerSession(32310194)--You have specified multiple ids for the entity class [oracle.bpm.analytics.simulation.persistence.model.RoundTripSequenceFlow] without specifying an @IdClass. By doing this you may lose the ability to find by identity, distributed cache support etc. Note: You may however use entity manager find operations by passing a list of primary key fields. Else, you will have to use JPQL queries to read your entities. For other id options see @Pr
<Sep 29, 2012 7:12:55 PM EDT> <Warning> <EclipseLink> <BEA-2005000> <2012-09-29 19:12:55.893--ServerSession(32310194)--You have specified multiple ids for the entity class [oracle.bpm.analytics.simulation.persistence.model.RoundTripFlowElement] without specifying an @IdClass. By doing this you may lose the ability to find by identity, distributed cache support etc. Note: You may however use entity manager find operations by passing a list of primary key fields. Else, you will have to use JPQL queries to read your entities. For other id options see @Pri
<Sep 29, 2012 7:12:55 PM EDT> <Warning> <EclipseLink> <BEA-2005000> <2012-09-29 19:12:55.908--ServerSession(32310194)--You have specified multiple ids for the entity class [oracle.bpm.analytics.cube.persistence.model.CubeProcessPerformanceFlex01] without specifying an @IdClass. By doing this you may lose the ability to find by identity, distributed cache support etc. Note: You may however use entity manager find operations by passing a list of primary key fields. Else, you will have to use JPQL queries to read your entities. For other id options see @P
<Sep 29, 2012 7:12:55 PM EDT> <Warning> <EclipseLink> <BEA-2005000> <2012-09-29 19:12:55.908--ServerSession(32310194)--You have specified multiple ids for the entity class [oracle.bpm.analytics.cube.persistence.model.CubeFlex01Nametab] without specifying an @IdClass. By doing this you may lose the ability to find by identity, distributed cache support etc. Note: You may however use entity manager find operations by passing a list of primary key fields. Else, you will have to use JPQL queries to read your entities. For other id options see @PrimaryKey.>
<Sep 29, 2012 7:12:55 PM EDT> <Warning> <EclipseLink> <BEA-2005000> <2012-09-29 19:12:55.924--ServerSession(32310194)--You have specified multiple ids for the entity class [oracle.bpm.analytics.cube.persistence.model.CubeNametabRange] without specifying an @IdClass. By doing this you may lose the ability to find by identity, distributed cache support etc. Note: You may however use entity manager find operations by passing a list of primary key fields. Else, you will have to use JPQL queries to read your entities. For other id options see @PrimaryKey.>
<Sep 29, 2012 7:12:55 PM EDT> <Warning> <EclipseLink> <BEA-2005000> <2012-09-29 19:12:55.924--ServerSession(32310194)--You have specified multiple ids for the entity class [oracle.bpm.analytics.cube.persistence.model.CubeTaskPerformanceFlex01] without specifying an @IdClass. By doing this you may lose the ability to find by identity, distributed cache support etc. Note: You may however use entity manager find operations by passing a list of primary key fields. Else, you will have to use JPQL queries to read your entities. For other id options see @Prim
<Sep 29, 2012 7:12:55 PM EDT> <Warning> <EclipseLink> <BEA-2005000> <2012-09-29 19:12:55.939--ServerSession(32310194)--You have specified multiple ids for the entity class [oracle.bpm.analytics.cube.persistence.model.CubeWorkloadFlex01] without specifying an @IdClass. By doing this you may lose the ability to find by identity, distributed cache support etc. Note: You may however use entity manager find operations by passing a list of primary key fields. Else, you will have to use JPQL queries to read your entities. For other id options see @PrimaryKey.
<Sep 29, 2012 7:12:55 PM EDT> <Warning> <EclipseLink> <BEA-2005000> <2012-09-29 19:12:55.939--ServerSession(32310194)--You have specified multiple ids for the entity class [oracle.bpm.analytics.cube.persistence.model.CubeProcessPartner] without specifying an @IdClass. By doing this you may lose the ability to find by identity, distributed cache support etc. Note: You may however use entity manager find operations by passing a list of primary key fields. Else, you will have to use JPQL queries to read your entities. For other id options see @PrimaryKey.
<Sep 29, 2012 7:12:55 PM EDT> <Warning> <EclipseLink> <BEA-2005000> <2012-09-29 19:12:55.955--ServerSession(32310194)--You have specified multiple ids for the entity class [oracle.bpm.analytics.cube.persistence.model.CubeActivity] without specifying an @IdClass. By doing this you may lose the ability to find by identity, distributed cache support etc. Note: You may however use entity manager find operations by passing a list of primary key fields. Else, you will have to use JPQL queries to read your entities. For other id options see @PrimaryKey.>
<Sep 29, 2012 7:13:01 PM EDT> <Warning> <EJB> <BEA-010202> <Call-by-reference is not enabled for the EJB 'RoundTripPersistenceServiceBean'. The server will have better performance if it is enabled. To enable call-by-reference, set the enable-call-by-reference element to True in the weblogic-ejb-jar.xml deployment descriptor or corresponding annotation for this EJB.>
<Sep 29, 2012 7:13:04 PM EDT> <Warning> <EJB> <BEA-015036> <In the EJB PeopleQueryMDB(Application: soa-infra, EJBComponent: oracle.bpm.bpm-services.ejb.jar), the value for the activation config property 'connectionFactoryJNDIName' will be ignored since it is overridden with the value 'jms/bpm/PeopleQueryConnectionFactory';>
<Sep 29, 2012 7:13:06 PM EDT> <Warning> <EJB> <BEA-010202> <Call-by-reference is not enabled for the EJB 'ProcessCubeAggregator'. The server will have better performance if it is enabled. To enable call-by-reference, set the enable-call-by-reference element to True in the weblogic-ejb-jar.xml deployment descriptor or corresponding annotation for this EJB.>
<Sep 29, 2012 7:13:07 PM EDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'SOATestBean', class oracle.soa.management.internal.ejb.SOATestBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Sep 29, 2012 7:13:08 PM EDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'FacadeFinderBean', class oracle.soa.management.internal.ejb.FacadeFinderBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Sep 29, 2012 7:13:08 PM EDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'CompositeMetadataServiceBean', class oracle.integration.platform.blocks.cmds.CompositeMetadataServiceEx was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Sep 29, 2012 7:13:08 PM EDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'LegacySOADirectInvokerSupportBean', class oracle.integration.platform.blocks.direct.Invoker was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Sep 29, 2012 7:13:08 PM EDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'SOADirectInvokerBean', class oracle.integration.platform.blocks.direct.Invoker was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Sep 29, 2012 7:13:08 PM EDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'SOAServiceInvokerEJB', class oracle.integration.platform.blocks.sdox.ejb.api.SOAServiceInvokerBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Sep 29, 2012 7:13:08 PM EDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'ContextAwareBean', class oracle.integration.platform.ejb.ContextAware was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Sep 29, 2012 7:13:09 PM EDT> <Warning> <EJB> <BEA-010202> <Call-by-reference is not enabled for the EJB 'CompositeMetadataServiceBean'. The server will have better performance if it is enabled. To enable call-by-reference, set the enable-call-by-reference element to True in the weblogic-ejb-jar.xml deployment descriptor or corresponding annotation for this EJB.>
<Sep 29, 2012 7:13:10 PM EDT> <Warning> <EJB> <BEA-011047> <Warning: In 'ejb-jar.xml' or annotation, EJB 'TaskQueryService' has container-transactions set when the EJB has a transaction-type of 'Bean'. The container-transaction settings will be ignored.>
<Sep 29, 2012 7:13:10 PM EDT> <Warning> <EJB> <BEA-011047> <Warning: In 'ejb-jar.xml' or annotation, EJB 'TaskMetadataServiceBean' has container-transactions set when the EJB has a transaction-type of 'Bean'. The container-transaction settings will be ignored.>
Edited by: Stuart Fleming on Sep 29, 2012 4:34 PM -
MacBook has fatal error on startup
Hi,
My macbook has just this morning - when I needed to email an assignment to a professor of course - has started to experience fatal errors on startup. The computer starts up normally,and once the desktop has loaded, a dialog comes up saying something along the lines of "Mac OS X has experienced a fatal error and must restart in 3 seconds." I brought it quickly to an authorized apple service store, but they couldn't do anything for the problem except start a program right when the dialog came up to block the shutdown process. However, I had to go to school, so while I was in class I downloaded TechTool Deluxe and I've been running it. It hasn't found any errors, so I don't know what to think about the startup problem. I was wondering if anyone had any experience with fatal errors on startup?
Also, the technician who helped me this morning said that it could be either a problem with hardware or software, but that if it was a problem with software, the diagnostic would not be covered by AppleCare. Since I'm trying to save as much money as possible as a student, does anyone have any tips as to determining whether this is a software issue, so I don't have to pay for a diagnostic check-up?
Thanks in advance!Boot from your OS X Installer Disc One that came with the computer. After the chime press and hold down the "D" key until the diagnostic screen appears. Run the extended diagnostics multiple times over at least several hours. If any errors are reported note down the error code(s) and report them back here.
If you get an error code with MEM in it that means bad RAM. HDD refers to the hard drive. MOB is the motherboard.
If you don't get any errors then try reinstalling OS X:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
Installed the NSU (nokia Software Updater) via the website.
I'm running XP pro & office Pro
P4 2ghz
THE ERROR on startup of NSU
Runtime error!
Program:...Nokia software updater\nsu_ui_client.exe
abnormal program termination.
What the... is this!!??? Can anyone explain what i'm doing wrong?
I also uninstalled and re-installed. Same problem.
My PC suite works fine29-Sep-2006
12:36 PM
andrey_gres wrote:
Please check Nokia Software Updater version and that everything is fine with distributive file. Download once more it from Nokia site (http://www.nokia.co.uk/nokia/0,1522,,00.html?orig=/softwareupdate) and install it once more. Let us know about result.
Andrey
i hve tried downloading nokia update several times from the nokia website...and after waiting for every 20 minutes for the download it say 'error reading setup initialization file' every time i double click on the software :@ ! Can anyone help? or provide me with a mirror website where i can download this update software from ? -
OC4J startup failed Annotated class format error on startup
I'm using OC4J standalone (the 93MB "Pure Java" download) on Fedora 7. JAVA_HOME and ORACLE_HOME are set. Running the startup command gives the following error:
OC4J startup failed with the following error:
oracle.classloader.util.AnnotatedClassFormatError, and the invalid class is given as 'oracle.j2ee.ws.client.BasicService'.
Any help is appreciated.What JDK did you use?
Certification Information will help you
Oracle Application Server 10g R3 10.1.3.1 Certification Information
http://www.oracle.com/technology/software/products/ias/files/oracle_soa_certification_101310.html
dgkim @ Databank Systems KR
Maybe you are looking for
-
FACEBOOK BUSINESS PAGE NOTIFICATIONS
Hi I have a Blackberry curve 9360. It is all configured to receive messages from my personal Facebook page. However I cannot seem to set it up to receive messages from my business page which is managed by the same personal page. Is there any way of d
-
How do I set up iMessage so I can send messages from my iPad to my iPhone using the same apple id
I am trying to set up iMessage so I can send and receive messages on my iphone 5 and my iPad using the same apple id.
-
Unique rollback in a BPEL process using web services
We are a cellular communication company using Oracle DB (10g) and Oracle Forms to run our business applications (customer care and the like). We have planned a system migration using the SOA approach with the latest release of Oracle BPEL Suite (busi
-
i had installed oracle 11g in f drive in my computer and when i uninstalled it folder app still exists and occupying around 4 GB of hard drive space and when i try to delete it from system as it was occupying more it is giving me error canno delete o
-
I have reinstalled Acrobat Pro 9 following a hard drive re format. It opens just fine but does not recognize my serial number. My computer is running Windows 7 64 bit