EPM 10 Report using Member Recognition - not displaying data
Hi Experts,
I’ve created a report using member recognition because I've had to combine CATEGORY and TIME in the column, all the formulas have being populated correctly for (CATEGORY + TIME), I have also saved it as an Input Form, however when I refresh the report can’t see any data and there is data for these periods and there is data.
Another issue I have – I’ve entered 777 into 2013.003 and it automatically picks up a (PERSON RESPONSIBLE) or if I input an amount such as 999999999 then click save data, I get an error “no data to save”
Has anyone experienced this before or am I missing an option somewhere - thx in advance
Shane
By algorithm I mean something like:
if CATEGORY=SOMETHING then show only TIME
if CATEGORY<>SOMETHING then show only CATEGORY.
But for this task custom member is a bit complex solution, manually created headers are better.
Look on my comment in the discussion after blog post with a complex report sample:
Static report in BPC NW 10
Vadim
Similar Messages
-
Report not displaying data from one of the infoproviders
Hi Experts,
Issue: Report not displaying data from one of the infoproviders
I have a report 'ReportA' which has multiprovider MP1 as the source.
MP1 has two Infocubes IC1, IC2 in its design.
Now, when i execute the report, data from IC1 is displayed. But no data from IC2 is displayed.
Is there a setting i need to enable in MP1 ? or is there anything else that needs to be enabled ?
Please reply.
Regards,
Suraj S NairHi All,
When i display data directly from the multi provider, without any restrictions, i cannot view the data from infocube IC2.
I feel its not an issue with the Query. It must be a problem with the setting in the Multiprovider MP1.
Infocube IC2 is a copy of Infocube IC1. Multiprovider MP1 first only had IC1 in its design. It was recently IC2 was also included.
I checked the Characteristics, all of them are assigned corectly.
Now, this issue sure has something to do wiht the setting of Multiprovider or please correct me if wrong.
Regards,
Suraj S Nair -
I have a crystal XI report that when run will not display data; if the report should be six pages that is the number of pages that will be generated. The problem is that the pages show up as blank. If the blank pages are exported the exported file will contain data, if the report is sent to a printer the report will contain data, but no data is ever displayed on the screen. This report has been loaded on 15 other computer and runs perfectly. Any help would be greatly appreciated. By the way if this user logs in remotely and runs this report it will display data.
A few ideas;
1) Make sure you are working with [SP 6|https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe].
You are on SP 2...
[SP6 msm|https://smpdl.sap-ag.de/~sapidp/012002523100000634032010E/crxir2sp6_rdc_mm.zip]
2) Try different resolutions
3) Try to see if there is an updated video driver
4) Make sure there is a default printer driver installed.
5) Run [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] see if there are any differences in dlls loading on a box that works and the one that does not (CR and non CR dlls).
Ludek
Edited by: Ludek Uher on Feb 22, 2010 10:32 AM -
XML has data but PDF is not displaying data
Hi Gurus,
I have one report with excel and pdf out put .
excel is working fine but pdf is not displaying data showing blank page . both out puts are using same XML.
Intresting thing is if I open RTF from bi publisher desktop and load XML data then i can see all the records.
but The same RTF is not showing data from Report.
I don't know what is the wrong with RTF.
I am attaching RTF and XML. could you please go through it and help me ?
Thanks for your help.Hi Bogdan,
i have 2 outputs for this report excel and PDF.
after scheduling report excel is working fine but PDF out put is failure. i am getting following message.
Job Name : Payment Request
Job Executed Date : March 19, 2015 9:15:11 AM CDT
Status : Job was failed.
View History :
Detail Message:
::RIPPLE_OUTPUT_FAILED::[INSTANCE_ID=vausobias201.austin.ppdi.com.1394740179760] [OUTPUT_ID=1006] ::DOCUMENT_GENERATION_FAILED::[INSTANCE_ID=vausobias201.austin.ppdi.com.1394740179760] [OUTPUT_ID=1006][ReportProcessor]Error rendering documentoracle.xdo.servlet.scheduler.ProcessingException: [ReportProcessor]Error rendering document
at oracle.xdo.enterpriseScheduler.bursting.BurstingReportProcessor.renderReport(BurstingReportProcessor.java:447)
at oracle.xdo.enterpriseScheduler.bursting.BurstingReportProcessor.onMessage(BurstingReportProcessor.java:127)
at oracle.xdo.enterpriseScheduler.u -
SQL Report Viewer Web Part Not displaying Report
I have just completed updating an old report using report builder 3.0. I have added it to SharePoint Designer but have not replaced the old report file.
Any help is greatly appreciated!!
All I did was export the old report from sharepoint designer to my desktop. Then opened it with Report Builder 3.0- made changes to the report and saved it with a different name (for safety in case i break things) and then upload it back to the same place where
the old report was located using SP Designer. I then went back to the site in sharepoint that is displaying the old report, and changed the URL path in the SQL report viewer to the new report.
Now the SQL Report Viewer web part isn't showing anything (blank)Dear Form Moderator,
This question is already asked in sharepoint forum so please don't move this sharepoint forum. Here is link of thread:
https://social.technet.microsoft.com/Forums/en-US/3796da85-fbb4-4722-a5d0-724859f7d4ae/sql-report-viewer-web-part-not-displaying-report?forum=sharepointgeneralprevious
Here is the one more duplicate thread link in same forum. So either you can merge both OR delete one.
https://social.technet.microsoft.com/Forums/en-US/259d2586-ed4a-4f47-a808-877d4621d9f2/report-builder-30-sql-report-viewer-web-part-not-displaying-report-in-sharepoint?forum=sqlreportingservices
[SharePoint Forum Moderator]
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help -
Read only table not displaying data
hi my read only table is not dispalying data when the page load,am in jdeveloper 11.1.1.6.0
<af:query id="qryId1" headerText="Search" disclosed="true"
value="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
model="#{bindings.ImplicitViewCriteriaQuery.queryModel}"
queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}"
queryOperationListener="#{bindings.ImplicitViewCriteriaQuery.processQueryOperation}"
partialTriggers="::t1"/>
</af:panelHeader>
<af:panelGroupLayout id="pgl1" halign="left" valign="middle"
layout="vertical" inlineStyle="width:1806px;">
<af:table value="#{bindings.CfgTablesView1.collectionModel}"
var="row" rows="#{bindings.CfgTablesView1.rangeSize}"
emptyText="#{bindings.CfgTablesView1.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.CfgTablesView1.rangeSize}"
rowBandingInterval="0" id="t1" width="705"
inlineStyle="height:500px;">
<af:column sortProperty="Tablename" sortable="false"
headerText="#{bindings.CfgTablesView1.hints.Tablename.label}"
id="c1">
<af:outputText value="#{row.Tablename}" id="ot1"/>
</af:column>
<af:column sortProperty="Description" sortable="false"
headerText="#{bindings.CfgTablesView1.hints.Description.label}"
id="c2">
<af:outputText value="#{row.Description}" id="ot2"/>
</af:column>
</af:table>it show no data to display even if there is data in the database
Edited by: adf0994 on 2012/11/15 9:43 AM
Edited by: adf0994 on 2012/11/15 9:45 AM
Edited by: adf0994 on 2012/11/15 10:02 AM
Edited by: adf0994 on 2012/11/15 10:09 AMok i did that is working,but the problem is when the page load it does not display data,i have to click search button and on my query panel and click refersh than able to see data
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns:f="http://java.sun.com/jsf/core">
<af:panelHeader text="Maintain Schema" id="ph1"
inlineStyle="height:853px; border-color:Lime; border-style:ridge;">
<f:facet name="context"/>
<f:facet name="menuBar"/>
<f:facet name="toolbar">
<af:outputLabel value="CF-L-017" id="ol1"/>
</f:facet>
<f:facet name="legend"/>
<f:facet name="info"/>
<af:panelStretchLayout id="psl1" inlineStyle="width:1869px; height:801px;"
bottomHeight="345px">
<f:facet name="bottom">
<af:panelGroupLayout layout="scroll"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
id="pgl3" inlineStyle="width:1950px;">
<af:panelStretchLayout id="psl2"
inlineStyle="width:1861px; height:376px;"
endWidth="4px">
<f:facet name="center">
<af:panelHeader text="Fields" id="ph6"
inlineStyle="height:500px; border-color:Lime; border-style:ridge;">
<f:facet name="context"/>
<f:facet name="menuBar"/>
<f:facet name="toolbar"/>
<f:facet name="legend"/>
<f:facet name="info"/>
<af:table value="#{bindings.CfgFieldsView1.collectionModel}"
var="row" rows="#{bindings.CfgFieldsView1.rangeSize}"
emptyText="#{bindings.CfgFieldsView1.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.CfgFieldsView1.rangeSize}"
rowBandingInterval="0"
selectedRowKeys="#{bindings.CfgFieldsView1.collectionModel.selectedRow}"
selectionListener="#{bindings.CfgFieldsView1.collectionModel.makeCurrent}"
rowSelection="single" id="t2"
partialTriggers="::cb2 ::cb5 ::cb6 ::cb4 ::cb3 ::t1"
inlineStyle="height:164px;" columnStretching="last"
width="918">
<af:column sortProperty="Fieldlabel" sortable="true"
headerText="#{bindings.CfgFieldsView1.hints.Fieldlabel.label}"
id="c7">
<af:outputText value="#{row.Fieldlabel}" id="ot4"/>
</af:column>
<af:column sortProperty="Format" sortable="true"
headerText="#{bindings.CfgFieldsView1.hints.Format.label}"
id="c4">
<af:outputText value="#{row.Format}" id="ot7"/>
</af:column>
<af:column sortProperty="Type" sortable="true"
headerText="#{bindings.CfgFieldsView1.hints.Type.label}"
id="c3">
<af:outputText value="#{row.Type}" id="ot6"/>
</af:column>
<af:column sortProperty="Length" sortable="true"
headerText="#{bindings.CfgFieldsView1.hints.Length.label}"
id="c6">
<af:outputText value="#{row.Length}" id="ot3">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CfgFieldsView1.hints.Length.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="Fielddescription" sortable="true"
headerText="#{bindings.CfgFieldsView1.hints.Fielddescription.label}"
id="c5">
<af:outputText value="#{row.Fielddescription}" id="ot5"/>
</af:column>
</af:table>
<af:panelHeader text="Details" id="ph4"
inlineStyle="height:191px; border-style:ridge; border-color:Lime;">
<f:facet name="context"/>
<f:facet name="menuBar"/>
<f:facet name="toolbar"/>
<f:facet name="legend"/>
<f:facet name="info"/>
<af:panelFormLayout id="pfl1" maxColumns="2" rows="3"
partialTriggers="t1"
inlineStyle="width:589px;">
<af:inputText value="#{bindings.Fieldlabel.inputValue}"
label="#{bindings.Fieldlabel.hints.label}"
required="#{bindings.Fieldlabel.hints.mandatory}"
columns="20"
maximumLength="#{bindings.Fieldlabel.hints.precision}"
shortDesc="#{bindings.Fieldlabel.hints.tooltip}"
id="it4">
<f:validator binding="#{bindings.Fieldlabel.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.Format.inputValue}"
label="#{bindings.Format.hints.label}"
required="#{bindings.Format.hints.mandatory}"
columns="20"
maximumLength="#{bindings.Format.hints.precision}"
shortDesc="#{bindings.Format.hints.tooltip}"
id="it3">
<f:validator binding="#{bindings.Format.validator}"/>
</af:inputText>
<af:selectOneChoice value="#{bindings.Type.inputValue}"
label="#{bindings.Type.label}"
required="#{bindings.Type.hints.mandatory}"
shortDesc="#{bindings.Type.hints.tooltip}"
id="soc1">
<f:selectItems value="#{bindings.Type.items}" id="si1"/>
</af:selectOneChoice>
<af:inputText value="#{bindings.Length.inputValue}"
label="#{bindings.Length.hints.label}"
required="#{bindings.Length.hints.mandatory}"
columns="20"
maximumLength="#{bindings.Length.hints.precision}"
shortDesc="#{bindings.Length.hints.tooltip}"
id="it2">
<f:validator binding="#{bindings.Length.validator}"/>
<af:convertNumber groupingUsed="false"
pattern="#{bindings.Length.format}"/>
</af:inputText>
<af:inputText value="#{bindings.Fielddescription.inputValue}"
label="#{bindings.Fielddescription.hints.label}"
required="#{bindings.Fielddescription.hints.mandatory}"
columns="20"
maximumLength="#{bindings.Fielddescription.hints.precision}"
shortDesc="#{bindings.Fielddescription.hints.tooltip}"
id="it1">
<f:validator binding="#{bindings.Fielddescription.validator}"/>
</af:inputText>
<f:facet name="footer">
<af:panelGroupLayout layout="vertical" id="pgl5">
<af:panelGroupLayout layout="horizontal" id="pgl2">
<af:commandButton actionListener="#{bindings.First.execute}"
text="First"
partialSubmit="true" id="cb2"/>
<af:commandButton actionListener="#{bindings.CreateInsert.execute}"
text="Add New"
id="cb5"/>
<af:commandButton actionListener="#{bindings.Commit.execute}"
text="Save"
id="cb7"/>
<af:commandButton actionListener="#{bindings.Delete.execute}"
text="Delete"
id="cb6"/>
<af:commandButton actionListener="#{bindings.Next.execute}"
text="Next"
partialSubmit="true" id="cb4"/>
<af:commandButton actionListener="#{bindings.Last.execute}"
text="Last"
partialSubmit="true" id="cb3"/>
</af:panelGroupLayout>
<af:commandButton text="Submit" id="cb1"/>
</af:panelGroupLayout>
</f:facet>
</af:panelFormLayout>
</af:panelHeader>
</af:panelHeader>
</f:facet>
<f:facet name="end"/>
</af:panelStretchLayout>
</af:panelGroupLayout>
</f:facet>
<f:facet name="center">
<af:panelHeader text="Tables" id="ph2"
inlineStyle="height:500px; border-color:Lime; border-style:ridge;">
<f:facet name="context"/>
<f:facet name="menuBar"/>
<f:facet name="toolbar"/>
<f:facet name="legend"/>
<f:facet name="info"/>
<af:panelHeader text="Filter" id="ph3"
inlineStyle="height:165px; border-style:ridge; border-color:Lime;">
<f:facet name="context"/>
<f:facet name="menuBar"/>
<f:facet name="toolbar"/>
<f:facet name="legend"/>
<f:facet name="info"/>
<af:query id="qryId1" headerText="Search" disclosed="true"
value="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
model="#{bindings.ImplicitViewCriteriaQuery.queryModel}"
queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}"
queryOperationListener="#{bindings.ImplicitViewCriteriaQuery.processQueryOperation}"
partialTriggers="::t1"/>
</af:panelHeader>
<af:panelGroupLayout id="pgl1" halign="left" valign="middle"
layout="vertical"
inlineStyle="width:1796px; height:298px;">
<af:table value="#{bindings.CfgTablesView11.collectionModel}"
var="row" rows="#{bindings.CfgTablesView11.rangeSize}"
emptyText="#{bindings.CfgTablesView11.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.CfgTablesView11.rangeSize}"
rowBandingInterval="0" id="t1" width="833"
inlineStyle="height:186px;" columnStretching="last"
columnSelection="multiple"
partialTriggers="::cb8 ::cb10 ::cb9"
rowSelection="single"
selectedRowKeys="#{bindings.CfgTablesView11.collectionModel.selectedRow}"
selectionListener="#{bindings.CfgTablesView11.collectionModel.makeCurrent}">
<af:column sortProperty="Tablename" sortable="true"
headerText="#{bindings.CfgTablesView11.hints.Tablename.label}"
id="c2">
<af:outputText value="#{row.Tablename}" id="ot2"/>
</af:column>
<af:column sortProperty="Description" sortable="true"
headerText="#{bindings.CfgTablesView11.hints.Description.label}"
id="c1">
<af:outputText value="#{row.Description}" id="ot1"/>
</af:column>
</af:table>
<af:panelFormLayout id="pfl2" maxColumns="3" rows="1">
<f:facet name="footer"/>
<af:panelGroupLayout id="pgl6" layout="horizontal" valign="middle"
halign="right" inlineStyle="width:1228px;">
<af:inputText value="#{bindings.Tablename.inputValue}"
label="#{bindings.Tablename.hints.label}"
required="#{bindings.Tablename.hints.mandatory}"
columns="#{bindings.Tablename.hints.displayWidth}"
maximumLength="#{bindings.Tablename.hints.precision}"
shortDesc="#{bindings.Tablename.hints.tooltip}"
id="it5">
<f:validator binding="#{bindings.Tablename.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.Description.inputValue}"
label="#{bindings.Description.hints.label}"
required="#{bindings.Description.hints.mandatory}"
columns="#{bindings.Description.hints.displayWidth}"
maximumLength="#{bindings.Description.hints.precision}"
shortDesc="#{bindings.Description.hints.tooltip}"
id="it6">
<f:validator binding="#{bindings.Description.validator}"/>
</af:inputText>
<af:commandButton text="Add New" id="cb8"
actionListener="#{bindings.CreateInsert1.execute}"/>
<af:commandButton actionListener="#{bindings.Commit.execute}"
text="Save" id="cb9"/>
<af:commandButton actionListener="#{bindings.Delete1.execute}"
text="Delete" id="cb10"/>
</af:panelGroupLayout>
</af:panelFormLayout>
</af:panelGroupLayout>
</af:panelHeader>
</f:facet>
</af:panelStretchLayout>
</af:panelHeader>
</jsp:root> -
When we run the FLEET transaction in SQ00, system is not displaying data.
Hi,
When we run the FLEET transaction in SQ00, system is not displaying data. If I enter the same values in selection in quality system, I am able to see. But with the same values is not storing in production, the output tale is not getting values.
Can any one provide the solution...?
Thanks....
Thanks & Regards,
SivaHi,
When we run the FLEET transaction in SQ00, system is not displaying data. If I enter the same values in selection in quality system, I am able to see. But with the same values is not storing in production, the output tale is not getting values.
Can any one provide the solution...?
Thanks....
Thanks & Regards,
Siva -
Hello BW experts,
I am having an issue where in my query is not displaying data even though there is data in the cube in production.
But the same query is displaying data for the same selection in QA system.
I have executed the tests in RSRT, but am not able to find anything.
Please give your valuable inputs.
Thanks in Advance
BW learnerHi,
Check the filters of your query, Is there any selection made where you are going to get only march data which is present in your production system.
Check the info cube data by giving the same filter values as in the query definitation. If you didnt find any data, then your query is working fine.
check this and let me know...
if you find some data in the cube with the same filter selection, then give me the data flow of your query, which means, whether the query is executed on Multiprovider or cube?
Regards,
Patil. -
SSRS report not displaying data in correct order
Guys,
I have a SSRS 2012 report not displaying returned records from SQL in the correct order. Running the stored procedure in SSMS and supplying the parameter values returns the data correctly and running Query Designer in SSRS using the stored procedure
on the dataset in question, likewise returns the data correctly. Only when I run the actual report does the data display incorrectly(always last name order). I've done similar reporting using very similar stored procedures and I've never had this
problem. Below is the stored procedure. "@SortBy" is the parameter with the sorting value. 1=Due Date; 2=Denial Amt and 3=Last name and is passed by SSRS to SQL. Wish I could supply screen shots.
Thanks for any help,
Dave
ALTER PROCEDURE [dbo].[RAC_PT_List]
@Level as int,
@SortBy as int,
@PTLName as varchar(30) = NULL,
@User as varchar(10) = NULL
AS
SELECT pat.headerID,
pat.PT_LName + ', ' + pat.PT_FName AS PTName,
pat.PT_AcctNo,
rco.RCO_CLMREF,
rco.RCO_AppealLevel,
rco.RCO_LevelNo,
rco.RCO_AuditorStatus,
let.LET_DEN_DueDate,
CONVERT(varchar(12),let.LET_DEN_DueDate) as DueDate,
let.LET_DEN_Dollars,
let.userID
FROM Master_PT_List pat
INNER JOIN Master_RCO_Work rco on RCO.PT_headerID = pat.headerID
INNER JOIN Master_Letters let on LET.PT_headerID = pat.headerID
WHERE (@PTLName IS NULL OR(pat.PT_LName LIKE + '%' + @PTLName + '%'))
AND (rco.RCO_LevelNo = @Level)
AND (let.userID = @User)
--AND (rco.RCO_AuditorStatus <> 'Closed' and rco.RCO_AdminStatus <> 'Closed')
ORDER BY
CASE WHEN @SortBy = '1' THEN LET_DEN_DueDate
END
DESC,
CASE WHEN @SortBy = '2' THEN let.LET_DEN_Dollars
END
DESC,
CASE WHEN @SortBy = '3' THEN pat.PT_LName
ENDHi DaveMac1960,
According to your description, when you render data in report, you find it always shows the data with unexpected order. Right?
In Reporting Services, if we don't set any sorting in tablix, it will order the data as your query in SSMS or Query Builder. In some scenario, for example, we add parent group for data rows, it will have the rows sort by the group on data field by default,
and the "order by" in your query will be ignored. So please check the Sorting tab in Tablix Properties, in this scenario, we suggest you delete any sorting in the Sorting tab so that the "Order By" clause can work.
Reference:
Sort Data in a Data Region (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
Substitution string used in custom Report column name does not display in PDF version of report
I am using Apex 4.2.6.00.03, Apex Listener 2 via Glassfish4 and have set up all my applications and reports on this system. We previously used Oracle 10.2, with Apache with a custom fopping document.
My issue is that I have a report that has custom column headings using a substitution string to pull in the begin or end date for the report. When the report is run and displayed, the column headings appropriately display the date. However, when I try to set up the Print to PDF option, the column headings are not displaying correctly.
Is it possible to use a substitution string in the column heading? I am able to use the substitution string in the Page Header and Page Footer and those display correctly.
In the Report Attributes setup I have set the "Strip HTML" to Yes and I have four columns that are using the &"ITEM NAME". string. See below for actual display:
The report column headings in APEX displays correctly (bold is the substitution detail):
Fund Account Description Balance 07/01/2014 Budget/Goal FY 14-15 YTD Actual 02/28/2015 Ending Balance 02/28/2015
In the Print Attributes setup, when I get to the Report Columns section, the Heading column displays the headings as set up in the Report Attributes custom and I am not able to edit these names. See below:
In the version of the report that is Printed to PDF I get the following for display:
Fund Account Description Balance %26amp;P347_BEGIN_DATE. Budget/Goal %26amp;P347_FY. YTD Actual %26amp;P347_END_DATE. Ending Balance %26amp;P347_END_DATE.
Any assistance would be greatly appreciated.
Thanks,
PatFirst, the misspelled word is a test object and not data.
Second, all data display correctly.
Third, text object is displaying the old misspelled word.
Fourth, I have eliminated the possibility that problems in of my pdf export routine cause this issue by exporting directly from Crystal Reports Viewer. I print the report to the crystal report viewer. The report looks good. The text object is spelled correctly. Then I click the Crystal Reports viewer's export button in the left upper corner and I export to both EXCEL and PDF. The excel export looks good. The pdf export is misspelled. All the export occurs internally in Crystal reports.
Fifth, I found outthat all users who have this problem have the ADOBE PDF writer installed. I am just suspicious that ADOBE writer is interferring with Crystal export
Sixth, I cannot recreate this problem on any of our development and test machines. It only happens on end-user laptops.
Seventh, I changed the name of the report that had this problem and created a new version and installed on end-user laptop. The behaviour still persists. User saved the report as both RPT and PDF. RPT export looks good. PDF version has the spelling problem. Data on both reports is up-to-date and good. I copied the same RPT export to my PC and exported it to PDF, the pdf looks good. That is why I think something on the end-users laptops is causing the export to use some cached template.
One more thing I did was to change the report name in VB.NET project, recreated a new package and installed on end-user's laptop. The same exact problem is still there.
I have worked with Crystal Reports more than 15 years and I have never such a weird behaviour before. I know this sounds very weird. We are all baffled by what is happening. -
Report upgraded from 6i to 10g not displaying data.
Hi,
I upgraded one report from 6i to 10g,
When I'm running the report for the same set of data.
After changing the layout for few fields in the subframe.
first time it has shown the data in the report output but now same report with same data is not displying the output.
I'm sure this is due to some layout problem.(may be due to upgradation from 6i to 10g)
Please guide me to resolve this problem.Hello,
How do you execute your Reports ?
Do you execute it from the Builder ?
If you execute it from the Builder, do you use Run Web Layout or Run Paper Layout ?
(If you have upgraded a Reports From 6i, there is no web layout , so you have to use the Run paper Layout
The web layout is something new that appeared in Reports 9.0.2)
Regard -
BPM reporting not displaying data for newly added field
Hello All,
I have a BPM process up and running fine. I have added reporting for monitoring no. of context field. I have also created a VC model for displaying the BPM report data. However, VC application is displaying only the context field that I had selected initially during the New Reporting Datasource creation. It'd not display the reporting data for the field that I added later.
Please helpHi Apoorva ,
Have you checked in the process repository whether your new process is activated or not?
Thanks & Regards,
Rohit -
Report does not display data in Oracle Applications
I created a custom report and registered the same under Oracle Order Entry. The report uses 1 parameter and whereas everything is registered in Oracle apps. correctly, the report draws a blank upon completion. The only visible thing is the header part.
This report though works fine if run directly from Reports Designer.
Anybody know what specific setting (if required) needs to be made in Oracle Applications? Further in order that you can know the picture, whatever is enclosed in the Repeating Frame does not show up in App. but as pointed earlier works just fine from Reports Designer.
Any help would be greatly appreciated.I am using a browser (FireFox v2) based InfoView so I guess it is the DHTML viewer.
On the server it is java (Tomcat). The report uses a custom driver (crdb_ado).
Currently all the servers (RAS, page, cache etc) are running under LocalSystem account. I don't understand what a domain account is, is it administrator?
The interesting part is, I was able to upload and run 8 other reports before I experienced this problem. Have I hit some limit?
I appreciate your help. Please share any other ideas/insights on this issue.
Regards -
Palm Desktop 6.2.2 on Win8.1 syncing but not displaying data
I'm so pleased to have found this forum. I didn't realise there was so much love for old Palm devices. I started with a Palm V and worked my way up to a Tungsten T & palm Desktop 4.1.4 on WInXP and everything has been so good that I've resisted moving away from Palm Desktop as it does everything I need. But I've just bought a new Win8.1 PC and am having some problems that I hope someone here can help with.
I've been through the help here about installing Palm Desktop 6.2.2 and the win8 driver and the installation was very smooth and I could hotsync via usb with no apparent problem, except that Palm Desktop is not displaying any of my palm data!
When I first ran hotsync (from the palm cradle button) it asked for a user name. My Tungsten T was already being used on my XP PC and was full of data. So I entered the Tungsten user name and hotsync continued. it took a couple of minutes or so (as would be expected) and when complete it said everything was ok. I checked the Hotsync logand it confirmed everything was synchronised correctly - but when I opened Palm Desktop there was no data being displayed.
I then checked the data files in ...documents\Palm OS Desktop\.... and the address and datebook files are present and full of my data. I even opened them using Notepad and could easily see loads of ascii text amongst all the 'junk' characters, so it looks as if the sync process has worked correctly but nothing from my Tungsten is being displayed in the Palm Desktop.
I then added an event in the datebook in Palm Desktop and another event on the same day in the Tungsten. I then did another hotsync. It was reported as successful but the Tungsten event did not appear in the Desktop although the Desktop even DID appear on the Tungsten. So the sync process seems to be only working one way!
I've never had this happen before and would really appreciate any help.
This question was solved.
View Solution.OK, try using the "Palm Hotsync Setup" program found on this page.
Since you are using an older T|T, this may be the answer.
There is a guide available from this website for migrating PalmOS data to Android, if interested. I made that jump years ago when webOS was ended. You can find it on their Home page.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked! -
Example of a Simple ALV Report using Function Modules (not OO)
Hi,
I am new to ABAP. Where can I get a proper Example of a Simple ALV Report using Function Modules? I searched the forum but did not find a proper solution. Kindly help.
Smruthi.
Edited by: Smruthi Acharya on Jan 29, 2009 7:13 PMHi,
Use this demo code:-
REPORT z_alv01 MESSAGE-ID zmsg.
* TABLES
TABLES : ekpo.
* TYPE POOLS
TYPE-POOLS : slis.
* TYPE DECLARATION
TYPES : BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
matnr TYPE ekpo-matnr,
werks TYPE ekpo-werks,
menge TYPE ekpo-menge,
END OF t_ekpo.
* PARAMETERS
PARAMETERS : s_var TYPE disvariant-variant.
* DATA DECLARATION
*VARIABLES
DATA : check(1),
rep_id TYPE sy-repid.
*INTERNAL TABLE TYPE OF ZEKPO
DATA : it_ekpo TYPE STANDARD TABLE OF t_ekpo WITH HEADER LINE.
*FIELD CATALOG
DATA : it_field TYPE slis_t_fieldcat_alv,
wa_field TYPE slis_fieldcat_alv.
*SORTING
DATA : it_sort TYPE slis_t_sortinfo_alv,
wa_sort TYPE slis_sortinfo_alv.
*FOR TOP OF THE PAGE
DATA : it_top TYPE slis_t_listheader,
wa_top TYPE slis_listheader.
*FOR END OF THE PAGE
DATA : it_end TYPE slis_t_listheader,
wa_end TYPE slis_listheader.
*TO CAPTURE EVENTS AND HANDLE
DATA : it_event TYPE slis_t_event,
wa_event TYPE slis_alv_event.
*FOR GRID TITLE
DATA : wa_title TYPE lvc_title.
*FOR LAYOUT
DATA : wa_layout TYPE slis_layout_alv.
*FOR EXCLUDING STANDARD BUTTON FROM ALV TOOLBAR
DATA : it_exclude TYPE slis_t_extab,
wa_exclude TYPE slis_extab.
*FOR VARIANT
DATA : wa_variant TYPE disvariant.
* INITIALIZATION
INITIALIZATION.
check = 'X'.
rep_id = sy-repid.
wa_variant-report = sy-repid.
*GET DEFUALT ON THE SELECTION SCREEN FOR DEFAULT DISPLAY
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = wa_variant
EXCEPTIONS
wrong_input = 1
not_found = 2
program_error = 3
OTHERS = 4.
IF sy-subrc = 0. " IF DEFAULT VARIANT FOUND
s_var = wa_variant-variant. " PASS THE DEFAULT VARIANT TO THE SELECTION SCREEN FIELD
ENDIF.
* AT-SELECTION SCREEN ON VALUE REQUEST
* TO GET THE F4 HELP FOR VARIANT
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_var.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = wa_variant
* I_TABNAME_HEADER =
* I_TABNAME_ITEM =
* IT_DEFAULT_FIELDCAT =
i_save = 'A'
* I_DISPLAY_VIA_GRID = ' '
IMPORTING
* E_EXIT =
es_variant = wa_variant
EXCEPTIONS
not_found = 1
program_error = 2
OTHERS = 3.
IF sy-subrc = 0.
s_var = wa_variant-variant. " PASS THE SELECTED VARIANT TO THE SELECTION SCREEN FIELD
ENDIF.
* AT-SELECTION SCREEN
* TO CHECK THE EXISTENCE FOR VARIANT
AT SELECTION-SCREEN.
wa_variant-variant = s_var.
CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = wa_variant
EXCEPTIONS
wrong_input = 1
not_found = 2
program_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE w001.
ENDIF.
* START OF SELECTION
START-OF-SELECTION.
SELECT ebeln
ebelp
matnr
werks
menge
FROM ekpo
INTO TABLE it_ekpo.
* FIELD CATALOG
wa_field-fieldname = 'EBELN'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 10.
wa_field-seltext_l = 'PO #'.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'EBELP'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 10.
wa_field-seltext_l = 'Line Item'.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'MATNR'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 15.
wa_field-seltext_l = 'Material'.
* wa_field-input = check.
* wa_field-edit = check.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'WERKS'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 6.
wa_field-seltext_l = 'Plant'.
* wa_field-input = check.
* wa_field-edit = check.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'MENGE'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 10.
wa_field-seltext_l = 'Qty.'.
* wa_field-input = check.
* wa_field-edit = check.
wa_field-do_sum = check.
APPEND wa_field TO it_field.
CLEAR wa_field.
* SORT W.R.T. PURCHASE ORDER NUMBER
wa_sort-spos = 1.
wa_sort-fieldname = 'EBELN'.
wa_sort-tabname = 'IT_EKPO'.
wa_sort-up = check.
wa_sort-subtot = check.
APPEND wa_sort TO it_sort.
CLEAR wa_sort.
* FOR GRID TITLE
wa_title = 'Hello'.
* FOR LAYOUT
wa_layout-zebra = check.
* FOR EXCLUDING STANDARD BUTTONS FROM ALV TOOLBAR
wa_exclude-fcode = '&OUP'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
wa_exclude-fcode = '&ODN'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
wa_exclude-fcode = '&OAD'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
* wa_exclude-fcode = '&AVE'.
* APPEND wa_exclude TO it_exclude.
* CLEAR wa_exclude.
wa_exclude-fcode = '&INFO'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
* POPULATE ALL EVENTS INTO INTERNAL TABLE
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = it_event
EXCEPTIONS
list_type_wrong = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE it_event INTO wa_event WITH KEY name = 'END_OF_LIST'.
wa_event-form = 'END'.
MODIFY it_event FROM wa_event INDEX sy-tabix.
CLEAR wa_event.
* DISPLAY RECORDS IN ALV GRID
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
i_callback_program = rep_id
* i_callback_pf_status_set = 'PF'
i_callback_user_command = 'COMMAND'
i_callback_top_of_page = 'TOP'
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
i_grid_title = wa_title
* I_GRID_SETTINGS =
is_layout = wa_layout
it_fieldcat = it_field
it_excluding = it_exclude
* IT_SPECIAL_GROUPS =
it_sort = it_sort
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
i_save = 'A'
is_variant = wa_variant
it_events = it_event
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = it_ekpo
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
*& Form top
* TO WRITE THE HEADER
FORM top.
REFRESH it_top.
wa_top-typ = 'S'.
wa_top-key = text-001.
wa_top-info = rep_id.
APPEND wa_top TO it_top.
CLEAR wa_top.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_top
* I_LOGO =
* I_END_OF_LIST_GRID =
* I_ALV_FORM =
ENDFORM. "top
*& Form end
* TO WRITE THE FOOTER
FORM end.
REFRESH it_end.
wa_end-typ = 'S'.
wa_end-key = text-001.
wa_end-info = rep_id.
APPEND wa_end TO it_end.
CLEAR wa_end.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_end
* I_LOGO =
* I_END_OF_LIST_GRID =
* I_ALV_FORM =
ENDFORM. "end
*& Form pf
* FOR PF-STATUS WITH USER DEFINED BUTTONS
* -->RT_EXTAB text
FORM pf USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZTG_PF_ALV'.
ENDFORM. "pf
*& Form command
* TO HANDLE USER ACTIONS AGAINST PF-STATUS
* -->UCOMM text
* -->SELFIELD text
FORM command USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
DATA : ok_code TYPE sy-ucomm.
ok_code = ucomm.
CASE ok_code.
WHEN 'T_DOWN'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'HELLO'
txt1 = 'USER COMMAND'
txt2 = 'TOTAL DOWN'.
WHEN 'DOWN'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'HELLO'
txt1 = 'USER COMMAND'
txt2 = 'DOWN'.
WHEN 'UP'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'HELLO'
txt1 = 'USER COMMAND'
txt2 = 'UP'.
WHEN 'T_UP'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'HELLO'
txt1 = 'USER COMMAND'
txt2 = 'TOTAL UP'.
ENDCASE.
ENDFORM. "command
Hope this helps you.
Thanks & Regards,
Tarun Gambhir
Maybe you are looking for
-
Dual Monitor HDMI Dock for MBP Retina?
Hello, Just purchased a MBP 15 Retina for home and work. At my office I have 2 HDMI Monitors that I would like to continue to use. I know I can do this through the ports on the MBP, My question however is: Does anyone know of a docking station that s
-
Oracle 11g install for WinXP 64-bit - is 32-bit client needed?
I just saw that the WinXP 64-bit version of 11g is now available. Does anyone know if it is necessary to install both the 64-bit Database and 32-bit Client on the same machine for a development server. This was the procedure for 10gR2 as the 64-bit O
-
Need help with a terminal command
Ever since Lion, or maybe even earlier, I am fighting a losing battle against memory leaks on my MacBook Pro. Safari for example takes over time 2GB+ for just 2 or 3 tabs open with almost no extensions active. Really strange. Someone told me about th
-
Report from multiple tables - two tired
Hi, I am trying to create a report with data coming from two tables in Apex, similar to one with a header record followed by detail records. The output would be similar to the output that would be generated from the statement below. Do you know if th
-
How do I inform Mozilla of a glitch?
I was recently upgraded automatically to Fire Fox 30 (I do not normally mind this) , however as this update began I lost all normal functions of my keyboard. I would also note my Mouse worked fine. I was opening my computer after shutting the lid and