EPM 11.1.1.3 Planning Application Available on 64 BIT Red Hat 5?

Hi
We want to install Hyperion EPM 11.1.1.3 Planning on RedHat 5-64 Bit and Window 2003 Server 32. I downloaded Planning/Essbase/Foundation Service/FR/WA from Oracle Edelivery for Linux 64 Bit platform. Weblogic 9.2 MP 3 were downloaded as well for Linux 64 Bit.
I have another Windows 2003 server 32 bit, we want to install EPM Architect, FDM, FR Printer Service.
On Linux 64 bit Server, we are going to install Shared Service/Workspace web app/Planning Web Application EAS Web Application /FR Web Application /WA Web Application
When I run installer to check the compoment, I found there are no 64 Bit Component except for Essbase and Administration Server has 32 bit or 64 Bit option.
1. Can anyone tell me if it is a true that only Essbase and EAS support 64 bit, Shared Service/Workspace web app/Planning Web Application EAS Web Application /FR Web Application /WA Web Application only support 32 bit component.
2. If I install Shared Service/Workspace web app/Planning Web Application EAS Web Application /FR Web Application /WA Web Application on Linux 64 Bit, Does that have any compatible problem?
We installed Hyperion 11.1.13 Planning 32 Bit one windows 2003 64 Bit Server, it has some problems with EPMA and Planning. I can't launch classic planning applcaiton from Workspace. From 8300 port, we can use classic way to access planning application. Someone said it is startup sequence problem, but I follow up Install ation and Configuraton, It doesn't have any help. From Event viewer, It said it is because 32 bit Oracle not compatible with 64 bit system. How can I fix this problem?
Regards
David Wang

Hi,
Yes according to documentation it supports.
But be very careful with the version of OS and softwares. Oracle will not support if the versions are not supported.
And keep in mind that if you are installing a 32 bit application on a 64 bit OS there are bound to be so many configurations which dont appear to be that clear in the documentation provided. We had to deal with some major issues related to java configurations.
I would recommend you to use an easier option of going with windows.
Hope this helps.
RG

Similar Messages

How to load new planning application in EPM 11.1.1.2-DIM ESSBASE ADAPTER

how to load new planning application in EPM 11.1.1.2-DIM ESSBASE ADAPTER

If you trying load metadata into planning using DIM then have a look here :- http://www.oracle.com/technology/obe/hyp_fp/DIM_Planning/OBE_Dim_Planning.html
Cheers
John
http://john-goodwin.blogspot.com/

Planning Application using Oracle EPM 11.1.1.1.0

Hi,
I have just installed Oracle EPM 11.1.1.0 and I want to create a planning application. Do I still need to have all the EPM services running? For some reason these services are not starting and I am just wondering if I can still go ahead and create a planning application.
Thanks in advance,
AD

Hi,
If you are going to create a planning application directly through planning and not the workspace then the minimum services you need started will be.
OpenLdap
Shared Services
Essbase
Planning
RMI Registry & EAS (Though strictly you might not actually need them running just to create an application but it is good practice to have them running)
Then you can go directly to set up an application through http://<planning machine>:8300/HyperionPlanning/AppWizard.jsp
Cheers
John

How to redeploy planning application using EPM System Configurator

Hello All
Can you please let me know how to redeploy planning application using EPM system Configurator.
I am applying a patch to ver 11.1.2.0 and i need to redeploy the planning app as one of the steps.
Thanks

Run the EPM configurator, expand planning and select "Deploy to Application Server", if it is a distributed environment and planning is not on the same server as the WebLogic admin server you will need to start the Admin Server
Cheers
John
http://john-goodwin.blogspot.com/

Write access to Planning application EPM 11

I have a Planning application and there are users/groups that have write access through Planning and I want to give these users/groups write access through Web Analysis.
I see in Shared Services there is provisioning for "Analytic Server Write Access", which gives them the ability to write outside of Planning (GREAT)....but I don't want the users to write to all the members they have write access to in Planning, only a select few. Any ideas?
Thx John

If you want to change the access in web analysis then you will probably have to look into updating the essbase filters.
If you do this you would have to keep rebuilding the filters after each planning refresh, can be done with maxl.
Cheers
John
http://john-goodwin.blogspot.com/

Creation of Public Sector Planning application fails for LDAP user

The environment is on Windows 2008 R2 & EPM 11.1.2.2.302 of Planning. The creation of "general" planning applications works fine, regardless of the method of creation, Native User/LDAP User or Classic/EPMA. The creation of Public Sector Planning application using Classic Administration fails when using an LDAP user.
It works when using a Native User. It also works fine if EPMA is used, for both Native as well as LDAP users.
Our developers are not comfortable with EPMA yet, so want/need the ability to create the applications using Classic Administration.
Looking at the Planning sysout log, the only error message indicates a timeout with Calculation Manager:
Calc manager rules initialization failed. Please load and deploy the rules from Calc Manager UI
ERROR:Error while loading rules in Calc Manager. <HTML><HEAD><TITLE>Weblogic Bridge Message</TITLE></HEAD> <BODY><H2>Failure of server APACHE bridge:</H2><P><hr>No backend server available for connection: timed out after 10 seconds or idempotent set to OFF or method not idempotent.<hr> </BODY></HTML>
Calculation Manager itself seems to be working fine.
Any suggestions/thoughts anyone?
Thanks,
Andy

Hi Vivek,
The LDAP port is open to all the servers in the environment. LDAP users have no issues logging in to any of the tools that they have access to.
I think it has something to do with how Classic Planning passes the security token to Calculation Manager for an LDAP user. For a "general" Planning app, there is no evidence of such a transfer, because the Rules are created after the app has been created. And there the user logs in directly to Calculation Manager to create the rules.
When using EPM Architect, it would lead to reason that such a token is also passed, however, that mechanism does not seem to have any trouble.
This is the first time I am using a pre-packaged application like PSB, and have so far worked with only with "general" Planning apps. Wanted to see if anyone else has created PSB apps using external users successfully, so I can trade environment notes and may be come to a cause/solution.
Thanks,
Andy

11.1.2.1 Planning application creation problem

Hi,
I have a problem creating a planning application. I've tried both the AppWizard and from Workspace. I am able to create a datasource that succesfully validates and when I apply the settings for the Planning application and press Execute it just hangs.
I checked the DB and in Essbase, it does not create any tables in the DB and no application in Essbase :-(
What am I missing??
My system:
Win 2K8 x64 fully updated, EPM version 11.1.2.1 x64 (Foundation (Minus EPMA (obviously!) and Calc Manager), Essbase, Planning), 12 GB RAM, SQL 2K5 SP3 x64, Office 2K10. all in one box.
I managed to replicate the error using a 32Bit OS an RDBMS.
I also checked the logs and the only log that makes any sense to me is: ESSBASE_ODL.LOG
It seems that theres a problem with getting application info from Essbase, but that is strange seem since the datasource was validated and the Essbase is up and running.
[2011-07-07T21:28:09.149-19:28] [ESSBASE0] [AGENT-1164] [NOTIFICATION] [16][] [ecid:1310062676662,0] [tid:5192] Received login request from [fe80::a190:d3cf:ae3c:4748]
[2011-07-07T21:28:09.156-19:28] [ESSBASE0] [AGENT-1187] [NOTIFICATION] [16][] [ecid:1310062676662,0] [tid:5192] Logging in user [Hypadmin@Native Directory] from [fe80::a190:d3cf:ae3c:4748]
[2011-07-07T21:28:31.429-19:28] [ESSBASE0] [AGENT-1164] [NOTIFICATION] [16][] [ecid:1310062676662,0] [tid:5196] Received login request from [fe80::a190:d3cf:ae3c:4748]
[2011-07-07T21:28:31.434-19:28] [ESSBASE0] [AGENT-1187] [NOTIFICATION] [16][] [ecid:1310062676662,0] [tid:5196] Logging in user [Hypadmin@Native Directory] from [fe80::a190:d3cf:ae3c:4748]
[2011-07-07T21:28:31.436-19:28] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1310062676662,0] [tid:5200] Received client request: List Applications (from user [Hypadmin@Native Directory])
[2011-07-07T21:28:31.437-19:28] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1310062676662,0] [tid:5204] Received client request: Get Application Info (from user [Hypadmin@Native Directory])
[2011-07-07T21:28:31.437-19:28] [ESSBASE0] [NET-16] [ERROR] [16][] [ecid:1310062676662,0] [tid:5204] RegEnumValue() Failed
[2011-07-07T21:28:31.438-19:28] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1310062676662,0] [tid:5184] Received client request: Get Application Info (from user [Hypadmin@Native Directory])
[2011-07-07T21:28:31.438-19:28] [ESSBASE0] [NET-16] [ERROR] [16][] [ecid:1310062676662,0] [tid:5184] RegEnumValue() Failed
[2011-07-07T21:28:31.439-19:28] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1310062676662,0] [tid:5192] Received client request: Get Application Info (from user [Hypadmin@Native Directory])
[2011-07-07T21:28:31.439-19:28] [ESSBASE0] [NET-16] [ERROR] [16][] [ecid:1310062676662,0] [tid:5192] RegEnumValue() Failed
[2011-07-07T21:28:31.440-19:28] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1310062676662,0] [tid:5196] Received client request: Get Application Info (from user [Hypadmin@Native Directory])
[2011-07-07T21:28:31.440-19:28] [ESSBASE0] [NET-16] [ERROR] [16][] [ecid:1310062676662,0] [tid:5196] RegEnumValue() Failed
[2011-07-07T21:28:31.441-19:28] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1310062676662,0] [tid:5200] Received client request: Get Application Info (from user [Hypadmin@Native Directory])
[2011-07-07T21:28:31.442-19:28] [ESSBASE0] [NET-16] [ERROR] [16][] [ecid:1310062676662,0] [tid:5200] RegEnumValue() Failed
[2011-07-07T21:28:31.443-19:28] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1310062676662,0] [tid:5204] Received client request: Get Application Info (from user [Hypadmin@Native Directory])
[2011-07-07T21:28:31.443-19:28] [ESSBASE0] [NET-16] [ERROR] [16][] [ecid:1310062676662,0] [tid:5204] RegEnumValue() Failed
[2011-07-07T21:28:31.444-19:28] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1310062676662,0] [tid:5184] Received client request: Get Application Info (from user [Hypadmin@Native Directory])
[2011-07-07T21:28:31.444-19:28] [ESSBASE0] [NET-16] [ERROR] [16][] [ecid:1310062676662,0] [tid:5184] RegEnumValue() Failed
I tried to reconfigure both Planning and APS and tried to redeploy the Workspace webserver.
All with no luck.
Any suggestions?? Thanks in advance.
Sib
Edited by: SibA on 2011-07-07 12:47

Hi again
I just restarted the service (again) and looking in the log shows two things:
1) That there is a warning/Error with the JMX Connectivity
From the log:
<08-07-2011 11:13:28 CEST> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
BEA-149510: Warning: Unable to establish JMX Connectivity with the Adminstration Server adminServer at adminURL.
Description: This managed server was unable to establish a JMX Connection with the administration server adminServer at the JMX Service URL adminURL.
Cause: This may because the adminstration server is not currently available or may indicate a misconfiguration of the configuration of the adminstrative channels.
Action: If the adminstration sever is currently running the adminstrator should consult the documentation on the configuration of the Administration channel.
2) An error with the locale settings:
Creating rebind thread to RMI
java.util.MissingResourceException: Can't find bundle for base name HspCustomMsgs, locale da_DK
java.util.MissingResourceException: Can't find bundle for base name HspImgs, locale da_DK
java.util.MissingResourceException: Can't find bundle for base name HspCustomImgs, locale da_DK

Error When Deploying a planning application

I've prepared a planning application in hyperion 9.3;
Validation is successful but when deploying the application deployment fails with the message "Action aborted. Please check the Job Status for results."
Job status shows:
===============================================================================
Started Time : Sunday, March 08, 2009 6:39:27 PM
Submitted Time : Sunday, March 08, 2009 6:39:27 PM
Last Updated Time : Sunday, March 08, 2009 6:39:29 PM
User Name : amjad
Process Name :
Thread : 0
Server : DimServer
Detail : Initiating Product Action...
Inspecting Deployment History...
Generating Headers and Callback Information...
Generating Application Data...
Preparing Product Request...
Posting Product Request...
Product Response:550...
Action aborted.
================================================================================
any suggestion?

Hi,
If you are going to be using EPMA the first thing to do is to make sure you have installed all the patches for EPMA and Planning.
They are available from [metalink3|https://metalink3.oracle.com/od/faces/index.jspx] , planning is at patch 9.3.1.1.10 and EPMA has around 5 patches.
Cheers
John
http://john-goodwin.blogspot.com/

Getting Unknown Source Error While Deploying the Planning Application

Hi,
Getting following error while trying to Deploy Planning Application from BPMA
Started Time : Tuesday, January 08, 2008 5:43:40 PM
Submitted Time : Tuesday, January 08, 2008 5:43:40 PM
Last Updated Time : Tuesday, January 08, 2008 5:44:32 PM
User Name : hpadmin
Process Name :
Thread : 0
Server : DimServer
Detail : App Creation failed with Exceptionjava.lang.RuntimeException: Exception occurred while creating the application. Check log for details at com.hyperion.planning.appdeploy.HspAppDefinition.deployAppFromXML(Unknown Source) at com.hyperion.planning.appdeploy.HspAppDefinition.access$000(Unknown Source) at com.hyperion.planning.appdeploy.HspAppDefinition$1.run(Unknown Source)

Hi,
I am getting the same error:-
Started Time : Tuesday, February 26, 2008 4:14:31 PM
Submitted Time : Tuesday, February 26, 2008 4:14:31 PM
Last Updated Time : Tuesday, February 26, 2008 4:15:39 PM
User Name : hpadmin
Process Name :
Thread : 0
Server : DimServer
Detail : App Creation failed with Exceptionjava.lang.RuntimeException: Exception occurred while creating the application. Check log for details at com.hyperion.planning.appdeploy.HspAppDefinition.deployAppFromXML(Unknown Source) at com.hyperion.planning.appdeploy.HspAppDefinition.access$000(Unknown Source) at com.hyperion.planning.appdeploy.HspAppDefinition$1.run(Unknown Source)
1---Have created new user for new App as well datasource
2-Bounced the EPMA as well planning server but no avail.
how I can I get detail log ? or if is it possible to tell me which directory to look into
thanks in advance
Sanjay

How to remove duplicate members in Hyperion planning Application.

Hi,
I have the 11.1.2.1 Planning Application installed on Windows OS and I have the employee dimension in it with many duplicate Employee members.Now this time I just wanted to remove those duplicte members to make sure that there is no redundency/any duplicate employee exist in Employee Dimension and moreover it is help us to increasing the performence of the application.
So can you please advise how can I achieve this.
Thanks in Advance.

Do you mean you have shared members in the hierarchy and you want to remove them, anyway one way is to export the dimension, clean the export file, then import it back it in but drop all the members from the dim first.
or maybe the delete shared members util - http://docs.oracle.com/cd/E40248_01/epm.1112/planning_admin/ch12s07s05.html
Cheers
John
http://john-goodwin.blogspot.com/

Unable to see planning application and dimension menus under navigate tab

Dears
Unable to see planning application and dimension menus under navigate tab in EPM 11.1.1.1 workspace.
Is there any configuration lost?
All EPM service have already started.
Thx
Hector

I also don't see the menu under "Consolidation" or "Planning" applications. I can naviaget to these applications from Navigate -> Application ->Consolidation or Planning and I see a box with up arrow and down arrow. If I keep my cursor between these two boxes, or the boundary, sometime I could start my applications in these two modules. I checked context.properties in \Hyperion\home\deployment\Tomcat5\workspace\webapps\workspace\conf folder.
#Appended properties
#Sat Jan 17 14:14:43 EST 2009
Reports=Y
HFM=Y
HPSU=Y
HP=Y
HPS=Y
Analyzer=Y
BPMA=Y
ChangeManagement=Y
Subcontext.properties file is as follows:
Analyzer=WebAnalysis
Reports=hr
HMB=metrics
HPS=HPSWebReports
HFM=hfm
HP=HyperionPlanning
BPMA=awb
HFM-version=9.3.1
HP-version=9.3.1
HPS-version=9.3.1
HMB-version=9.3.1
BPMA-version=9.3.1
# Parameters for all contexts
#KeepAliveInterval=10
#SessionTimeout=30
#logon=bpm.logon
#startup=cds.mode
I also removed # character in the last four lines but I cannot see my aplications under "Consolidation" or "Planning.
This is in Hyperion 9.3.1 environment all my websites are working. Workspace, Shared Services etc. I checked all my servies and they are working ok.
http://lewisxphub:19000/workspace/index.jsp
Any Ideas?
Thanks
Jay
Edited by: Keerthi on Jan 29, 2009 4:31 AM

Planning applications are not diplayed in the planning web

Hi
i have installed all products of hyperion 11.1.1.3 and my problem is iam able see the planning applications in workspace,but when i access the planning application through web i got the error like
No applications are available. please suggest me how to get applications through web.
Thanks
Ravi
Edited by: user6639 on Oct 7, 2009 11:33 AM

Hi,
Try below steps:
1. Open Planning application in workspace
2. Click "Administration" menu and click "Manage Properties".
3. Click "System Properties" tab and find "CREATOR_URL" property.
4. Copy and paste the vlaue URL of this property in a web browser and see if you still don't see the applications in a drop down
Let me know if it helps.
Cheers
RS

Planning application to production application

Hi,
can we copy the development planning application to production application.(i want to copy the outline),because we made changes in dev outline after migrating to production.
please guide me how to do it.
Bunny

Hi,
You could use copyapp utility, have a look at :- http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_hp_admin/ch09s01.html
Cheers
John
http://john-goodwin.blogspot.com/

How to Unlock planning application from Backend ?

Hi Gurus,
How
to Unlock planning application from Backend ?

You should use the utility to unlock it http://docs.oracle.com/cd/E17236_01/epm.1112/hp_admin/ch04s02.html
But it refers to planning table HSP_UNLOCK
Cheers
John
http://john-goodwin.blogspot.com/

Supported/Best Practice to restore Planning application between servers

I have two servers with Hyperion Planning 9.3.1 (prod and dev) I want to copy the application called 'BFS' from Production to 'NewBFS' - Dev server.
As per our consultants they indicated to do the following:
1. Backup the repository database containing application BFS from production
2. Do a restore of the .bak file to 'NewBFS' database on dev server
3. Resync orphan logins (from sql server logins and database logins)
4. Log into Planning via the default admin user ID
5. Go to application settings and change the URL
6. Register the Shared Services URL
7. Manage Database
8. Check all boxes and click refresh
9. Go to Shared Services and resync native directory users
However when try to log into planning with something other than 'admin' we receive an error that 'user xx is not provisioned ...'
From my db experience the user tables are either still referencing production and/or have not resynced properly.
So long story short...can I restore one Planning app to another server and if so what is the supported/best practice?
thanks
JTS

HemanthK ,
This is what we do to restore one planning app from prod to test. And now it looks like it works: We are MS SQL Server so these instructions are based on SQL DB
1. Backup the Planning Application SQL DB on Production
2. Stop the Shared Services and Planning Services on Development
3. Restore the Production Planning App SQL DB
4. Reset orphan logins (SQL script is available at other sites, just google Reset orphan users SQL)
5. Restart the Shared Service first then Planning Service on Development
6. Log in development as default admin to Planning, go to the new app, choose Manage Application Settings
7. Run the script John had indicated c:\Hyperion\Planning\bin>Updateusers.cm servername adminname adminpassword applicationname (no dashes before each parameter)
8. Go to planning as admin again, choose a form and choose assign access, choose add access, choose migrate identities. Here is a good self-check to see that the users are only the users from development box
9. finally go to manage databases in planning, choose refresh database and security
10. choose manage security filters it should now reflect only development users
11. login as a development user into planning to ensure correct security/user rights...
You should now be able to access the application on the development box.

EPM 11.1.1.3 Planning Application Available on 64 BIT Red Hat 5?

Similar Messages

Maybe you are looking for