EPM 11122 to 11123 upgrade issue: Links in Workspace does not work

Hi John & All,
We have an existing EPM 11.1.2.2 installed on Linux & windows platforms. This is a planning & HFR domain. Except FDM, Dimension server, HFR all other services are out of Linux server.
Linux - ServerA (Physical server). However we access all URLs using a different DNS alias ServerC which points to ServerA
Windows - ServerB
Followed http://docs.oracle.com/cd/E40248_01/epm.1112/epm_install/frameset.htm?ch10s05.html for upgrade.
Installation and configuration went well. We are using Embedded http server. In the final step of web server configuration
- Did the configure web server with Embedded ( port 28080). It was successful.
- Then in WL console changed the Listening address to ServerC for all managed servers including Admin server
- Then using configtool ran the step "configure logical web addresses"
- Here selected set logical addresses for services individually & then for all services running on ServerA
(workspace/shared services/aif/aps/datasync/planning/eas/calc)
set them to ServerC:28080 (DNS alias)
And for services running on Windows BPMA & FDM set to ServerB:80
This went through well.
Started all the services. All WL services came up without issues. CAn login to Workspace & shared services. I can see the look and feel changes and can see all new EPM 11123 icons under "Navigate-->Administer". But when I click on any of the links (Dimension lib/Application lib/planning/Data management etc) all fail with similar error
"A Not found error occured while communication with server". In show details it says for example...
URI: http://ServerC:28080/awb/conf/AwbConfig.xml - status 404 not found"
For each application the error is similar http://ServerC:28080/<context> - status 404 not found
Obviously the Logical web address set to 28080 is not working. But all the below URLS work fine
http://serverC:9365/aps/APS
http://serverC:8300/HyperionPlanning/conf/HspJSConfig.xml
http://serverC:19091/awb/conf/AwbConfig.xml
http://serverC:8500/calcmgr/conf/CalcMgrConfig.xml
http://serverC:19091/awb/conf/AwbConfig.xml
http://serverC:28080/workspace
To fix this issues, tried reconfiguring Logical web address to all individual application, this time to correct respective ports where they are listening instead of 28080. As I can see only workspace is working on 28080.
I can see this new configuration updated in registry. Bounced the domain including Admin server. But the issue persists. For each link, it is still looking for old Logical web URL "http:serverc:28080/<context> instead of picking up new Logical addresses configured.
Please suggest ways to fix the issue.
Reagrds
vara
HHee

Issue got resolved after installing OHS instead of using embedded http server. In OHA it gives the flexibility to point to DNS alias.

Similar Messages

After upgrading to Lion internal mic does not work with Facetime

After upgrading to Lion internal mic does not work with Facetime. The mic is picking up sound as noted in System Prefs. This was working just fine before the updgrade. Facetime works OK on my iPod.

you have in french a tutorial to recreate your partition here
Rebuild partition with Recovery HD lion after upgrade to 10.7.2
i tested, it's work !
For your wifi problem:
Try to change your setup of wifi, look this table given by apple:
I changed my wifi setup wep to wpa and it's work !

After upgrading to Lion Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

After upgrading to Lion, Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

Ouch, if it is indeed damaged, then sadly you need to restore the whole danged huge OS!
Didn't used to be this way before Lion/10.7.
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

Link inside webpage does not work.

link inside webpage does not work ( http://ochre.lib.uchicago.edu/marathi/ ). i was able to launch a java program by clicking the link in the middle of the page in firefox 6. now it doesnt work in latest versions. link works fine in IE9

Anyone?.

Windows 8.1 - Upgrade from 8, Start Button Does Not Work

I cannot find a fix for my 8.1 start button.
It works when I move the task bar to the top, right or left but not at the bottom. I ran all windows updates and there are no missing/unknown drivers in device manager. No errors in the event log. I've restarted multiple times and created a new local profile.
I've also tried:
Copy WinX folder under C:\Users\Default\AppData\Local\Microsoft\Windows into C:\Users\[your user name]\AppData\Local\Microsoft\Windows.
dism /online /cleanup-image /restorehealth
Any ideas? I would prefer not to do a clean install. Thanks in advance.
HP Touchsmart 23 series
i5-3475S 2.90GHz
16GB RAM
1TB HDD

Could you please describe a little more detailed about “Start Button does not work”? What is the symptom?
Yes, when the taskbar is at the bottom of the screen, I cannot left click on the start button. The machine is also a touch-screen, which does work when I touch the start button. If I move the task bar to the left, right or top; the start button does work.
And what is the kind of the account, Domain? Local? Or both?
This is local machine.
It still doesn’t work in a new account?
Same issue happens with a new account.
What happens if you use win + "X"?
Win + "X" works fine; displays options.
Regarding to the “doesn’t work, both for screen touch and mouse?
Left-click via the mouse does not work. Touch works fine.
Can you try to copy the WinX folder from a working PC to your PC for a test?
I do not have another Windows 8.1 machine available to me.

"Download Linked File As" Does Not Work

As others have noted, although Safari is an excellent and fast browser, there is one feature that is quite annoying, namely that all filed download by default to a single folder selected in preferences. Internet Explorer (and Firefox, I believe) by default allows the user to save to any folder selected at the time. In each thread I've read noting this problem, someone answers that the solution in Safari is to right click on the link and select "Download Linked File As" then direct the browser to the folder. The problem is that this does not work as Safari downloads only the link (or something else) but not the linked file. For example, if the linked file is a PDF, under "file type" PDF does not appear, only "All Files" and once the download is complete you have an entry in the desired folder but not the file itself. (This is true even if you append the proper suffix to the file name; no actual file.) Is there a solution here or does it really take several steps to get a downloaded file into the folder of choice?

I just checked a pdf and "Download linked file as" does give me option to save where I want for pdf, jpg files and others.

D-Link 562M modem does not works in Solaris 10 (?)

I use D-Link 562M external USB 56K modem. Modem works in Windows but does not works in Solaris 10 (?). Help me!

pat.gibbons wrote:
Not supported yet but will be in a future Solaris Express release.Many USB modems are not really modems but the entire signal processing is done by the host computer. Such "winmodems" require signal processing software which is quite complex. I do not think that such modems are supported in the following versions of Solaris.
If the 562M is NOT such a modem (but a "real" one) it should be quite easy to adapt a driver to work with this modem.
Martin

Desktop software links and menu does not work

Hi,
i have a blackberry bold 9000 and installed the latest desktop software 4.6 from the blackberry website.
my device manager says connected. but if i start desktop manager, i don't see the main header menu (there is just nothing, where the text menu should be) and the icons in the main window does not work as links. there is no connection to anything.
i have uninstalled all blackberry software and installed it new. i have installed several runtime environments manually, including java and c++. but that makes no difference at all.
what could be the problem? what runtime is necessary and should working correctly for blackberry desktop manager software? do i need some tweaks in internet explorer security settings (active scripting or something like that) ?
best regards!
Message Edited by o-atas on 10-08-2008 07:00 AM

hello o-atas,
could you make a screenshot and show it to us ?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Since I upgraded to Yosemite, my CS5 does not work correctly.

Since I upgraded to Yosemite in October, my photoshop CS5 does not work correctly. When right clicking to change a brush size, the adjuster when moving to the right or left, either sticks or moves radically. As I set the size of the brush and move my cursor back to the image, the adjuster moves with the cursor.
Help!

sharonfrombury wrote:
Is there no contribution from Apple support community for this question yet? I know there have been teething problems upgrading to Yosemite, but this loss of functionality is adding administrative workload that I can ill afford. Come on Apple, some ray of light please.
If you read the Terms of Use you agreed to you would realize Apple does not read or participate in these user forums. All posts and responses are end users just like yourself. If you have feedback for Apple please post it at www.apple.com/feedback. Please do not expect to hear back from Apple, they read the feedback but do not reply.
Also, the feature the feature of combining multiple PDF's into one document using the Preview app works perfectly.

HT1338 Upgraded to Lion. IWork does not work. How do I fix this?

I increased the size of my hard drive to 1TB and upgraded from Snow Lepord to Lion. iWorks 09' (keynote, pages, numbers) and iPhoto do not work. I have used software updated and everything is current.
Is there a patch of something else I need to do to make them compatible?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. For privacy’s sake, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful.

I need the CORRECT link to dl Photoshop Elements 13 and Premiere. Was given the trial link and it does NOT WORK!

Above question. Thank you.

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Link in Report does not work when run on Citrix

Hello,
we use Crystal Reports (v11) for creating Reports.
Data is based on our CRM system "SuperOffice".
We have several reports and what we did is to add a column that includes a link to SuperOffice.
For example - if I have a list of contacts as a report, then every line has a link to SuperOffice.
If I click this link, the contact in SuperOffice gets open.
This works on lokal pc installations.
But is doesn't work on a citrix server.
If I click the link - nothing happens.
Is that a known problem or does anyone have any ideas for that?
Are there any known problems with links in reports on citrix servers?
Thanks in advance.
Best regards,
Tony

Hi Don,
thank you for fast response.
That is a good advice. We will check that.
The main question is, to which folders etc. does CR needs access?
To explain the situation better: To run the reports we use Crystal Reports Runtime (Version 11.1.1883).
Do you (or anyone else in these forum) know where we could get information about which kinds of access CR Runtime needs to handle with these links?
Regards,
Tony

Click on a mac appstore link in safari does not work anymore

Hello,
I'm on OSX Yosemite 10.10.1 using latest versions of Mac App Store, Safari, Iron and Firefox.
In a recent past, in Safari, Iron or Firefox, when I clicked on "view in Mac App Store" link, the Mac App Store app opened.
I clicked by mistake on "No" in a box.
Now, when I click on "view in Mac App Store", nothing happens.
Where in MacOSX or elsewhere in my Yosemite, can I get the setting to open the Mac App Store app from a browser.
Thanks in advance.
Regards,
Marc.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Resolution issues (oh, and xvidtune does not work)

I'm using my 32" Samsung TV as my PC monitor.
according to the specs in the manual, the max resolution it supports is 1360x768 @ 60Hz
also, according to the manual, the horizontal frequency is 30-60 and vertical is 60-75
I use the GeForce 7950 GX2 video card, and am using the latest nvidia drivers.
here is the issue:
X starts up. it even uses 1360x768 as it should. however, the display is not aligned with the monitor/TV - there is roughly a 150 pixel "gap" on the left side of the monitor.
I tried a lot of things to eliminate it:
1. adjust the picture on the screen using the monitor itself, obviously (it doesn't go past this point. can't move it more to the left.. I don't know why the limit this, but they do)
2. xvidtune worked on numerous occasions for me in the past, but it fails horribly this time. whatever I do (even if I don't change anything) it tells me that the mode line I am requesting is either impossible or unsupported by my hardware config
3. looked for a way to adjust the screen position using the nvidia tools, but I cannot find a way to do so.
Currently, to be able to use the TV/monitor at all, I'm using the 1024x768 resolution in 4:3 picture mode. But this just won't cut it, I want to use the 1360x768 resolution in 16:9 picture mode (widescreen) as I _should_ be able to.
how should I take care of this?
my xorg.conf (complete) is as follows:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "AutoAddDevices" "off"
Option "AllowEmptyInput" "off"
EndSection
Section "Files"
#RgbPath "/usr/lib/X11/rgb"
FontPath "/usr/share/fonts"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,ru"
Option "XkbVariant" ",phonetic"
Option "XkbOptions" "grp:caps_toggle"
EndSection
Section "Monitor"
# 96 DPI @ 1360x768
Identifier "Monitor0"
VendorName "Unknown"
ModelName "SAMSUNG"
DisplaySize 359 203
HorizSync 30.0 - 60.0
VertRefresh 60.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7950 GX2"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "UseEdidDpi" "false"
Option "DPI" "96 x 96"
Option "AddARGBGLXVisuals" "True"
Option "TwinView" "0"
# Option "metamodes" "1360x768 @1366x768 +0+0"
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection

Perhaps try replace your Screen section with this:
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP-1: 1366x768 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection

After upgrading to 7.8 keypad does not work when c...

I upgraded to 7.8 today after having poor quality voice on previous version (I have a 20 mb/s connection). However I now have the problem when connected to a call system that clicks on the keypad, although apparently generating a tone, are not being recognised at the far end. I cannot therefore get to the person I need to via the call centre and have had to resort to a normal (and expensive) international call.

The disk folder you're describing sounds a lot like the Windows Favorites folder. That's actually completely independent from Firefox's bookmark storage.
After your upgrade, did you freshly install Firefox? In that case, the problem might be an incomplete import of your Windows Favorites (IE Favorites) instead of an incomplete recovery of your old Firefox bookmarks.
To see whether you still have your Firefox bookmarks, in your backup -- for example, the C:\Windows.old\ folder, or a backup on external media -- could you try to track down a folder named '''bookmarkbackups'''. By default, this is hidden folder, so you may need to turn on viewing of hidden files and folders. This article has the steps: [http://windows.microsoft.com/en-us/windows/show-hidden-files].
Let me know what you find and then I can suggest next steps.

EPM 11122 to 11123 upgrade issue: Links in Workspace does not work

Similar Messages

Maybe you are looking for