EPM 2013 Report is displayed as cut off and shows less than half the width of the report in IE 10 and IE 9.
EPM 2013 Report is displayed as cut off and shows less than half the width of the report in IE 10 and IE 9. This issue occurs for some users only.I tried the same url in google chrome and is working fine.
Can you please help.
Please find the attached screenshot.
Hi BJ1986,
According to your description, I think this issue is caused by the IE browser that runs the report. To trouble shoot this issue, I suggest that we can try to clear internet temporary files, cookies and others in IE browser. And also add this site
as a trusted site in IE browser to check this issue again.
If this issue is still existed, it can also be occurred due to the setting or third party add-ons of Internet Explorer (IE). In this scenario, you can try to run IE in compatibility mode to check the issue again. Or I suggest that you can refer to the
steps below to troubleshoot the issue:
Click Tools -> Internet options.
Switch to the Security tab, click Local intranet, and then select Default level.
Switch to the Advanced tab, and click Restore advanced settings.
Temporarily disable third party add-ons. For detailed steps, please see the link below:
http://windows.microsoft.com/en-IN/internet-explorer/manage-add-ons#ie
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support
Similar Messages
-
While using my imac the display just cuts off whats causing this
while using my imac the display just cuts off but the machine is still on and I have to push the power button a couple of times fir it to cut back on whats causing this?
Hi keithfromcapitol heights,
It sounds as if your iMac is going to sleep unexpectedly. Is this during use or after it has been left alone for a while (which can be normal if it is set that way?) If during use, I would suggest that you reset your System Management Controller, using the steps in this article -
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Thanks for using Apple Support Communities.
Best,
Brett L -
why do i constantly get cut off on calls. I've had this problem with my 3GS, my 4S and now my iPhone 5. When the core functionality is Phone, i.e. the ability to talk, why can't Apple make the iPhone function as a Phone? is there an App for that !!
Well, since you've had the same problem, with three different phones, that all use different size sim cards, it seems pretty obvious the problem is with your carrier/coverage & nothing to do with your phone or sim card.
-
Can the width of a report that has been run in the background be increased?
Hello Experts,
How can I increase the width of a report that I have run in the background so that it does not wrap text to the next line?
I have been running the same HR report successfully in the background for many months. Today I ran it with the same parameters that I've always used and when I retrieve it from my Own Job Spool - System | Own Spool Request | Display Contents the last field is wrapped to the next line.
Thanks.
Regards,
JeanetteJeanette,
Thereu2019s another possibility if Tedu2019s suggestion doesnu2019t work. When you look at your spool requests, thereu2019s an icon on the toolbar next to the eyeglasses that looks like a yellow rectangular callout. Itu2019s called u201CDisplay in Maximum Widthu201D. Select the Spool no. to display and then press this icon. Shift + F4 is the shortcut.
Regards,
Howard -
How to increas the width of the Table in OBIEE Report
Hi ,
I am creating a OBIEE report, the report has table and 30 column in it. When I am viewing the report in an excel file , its appearing good but the width of the table is so small if I am viewing the same in internet explorer/PDF .I dont know how to increase the width of the table. Could you please sort this issue out.
Thanks
Govindan P- you can increase the width of a column -> column format values -> Additional Formatting Options
increase the width:
- Report level:
result tab -> Click on Format container of Table -> Additional Formatting Options
u can assign value width : 500 height:.....
- dashboard level:
Edit options -> section -> Format section -> Additional Formatting Options
here also u can change the width
u can assign value width : 500 height:.....
pls mark it helps....
Edited by: 979481 on Feb 6, 2013 1:25 AM -
My macbook had a weird behavior on the display, now it won't go further than gray loading screen with the apple logo. It's a macbook pro early 2011. I've read that those are having issues, if there's someone i can contact for further information, report the issue since it's getting common or any temporal solution available. Thanks
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Modifying the width of the DESNAME system parameter in Reports 6i
This is probably so simple so I apologise for posting it here but I've been asked to look at an error with an Oracle Report (Reports 6i) (I've never really used Reports).
When attempting to run the report, we get the following error :
REP-0091: Invalid value for parameter 'DESNAME'.
I think this is because the runtime value supplied for the DESNAME parameter exceeds the width property defined in the report. However, I cannot seem to modify the width property in Report builder.
Can someone tell me how to modify the width property for the DESNAME system paramter ??Hi!
I don't think it is possible to increase its width. It's a system parameter which can have several pre-defined or user-defined values. Check the documentation or help regarding this.
Also, I think you can check several things.
1. Check "Report Triggers" if any. DESNAME can be modified there. Menu item "Program" --> "Find and replace in PL/SQL..." can help to search the code.
2. But more likely, incorrect value of DESNAME is passed into report from a calling module or batch script, or whatever. It can be a RUN_PRODUCT call in forms, or RWRUN60 in script. Check DESNAME there.
3. Try to debug. Use srw.message to display DESNAME value at report startup, for instance in "before parameter form" trigger.
Regards,
Andrew Velitchko
BrainBench MVP for Developer/2000
http://www.brainbench.com -
How to change the width of PDF report
When i download an interactive report to a PDF. All the columns will have the same width, how to change the width of the column?
Thanks,
JenI don't think its possible for downloading from interactive report but let's see if anyone else has got a work around.
The other way to have absolute control over report layout is to create reports using 'Report Query' & 'Report Layout' under 'Shared Components'.
Regards,
Ashish Agarwal
http://www.dbcon.com -
Suddenly, time machine is very slow. Used to take up a minute and now more than half an hour. Does anybody know how this can happen? Indexing the back-up disk is off, but Timde Machine keeps on indexing!
same issue here...
-
Updating the width of a report
Post Author: abdoing
CA Forum: General
hi,
i'm working now with crystal reports professional edition v10, and i have a probleme that i can't update in design the width of my report
(its fixed to 20 cm) so i'm searching a way to grow it and think you.Post Author: pvierheilig
CA Forum: General
I believe you want to adjust the 'Page Setup' options / Print options from the File menu. Selecting a printer from the list that is already installed on your computer will allow page dimensions for only what the printer is able to print. Hope that helps. -
How to increase the width of the Crystal Report
Hello All
How to increase the width of the Crystal report template in the CR designer in .NET 2005 editor ?
I need to design a report which has to accomodate more number of columns.So achieve that i need to redesign the report having more width.
CrystalReports version 10.2.3600.0
Thanks in advance
SrivatsaHI Srivatsa,
You can make a wider report by creating virtual pages. Virtual pages are the extra pages to the right of the main page that get created to accommodate cross-tabs that are wider than a single page. By inserting a cross-tab in a report then suppressing it, you can create a report that is multiple pages wide.
Insert and Suppress a Cross-Tab
1. On the 'Insert' menu, click 'Cross-Tab'.
2. In the Cross-Tab Expert, click any field and move it into the 'Columns' box, and click any field and move it into the 'Summarized Fields' box. Do not move any fields into the 'Rows' box.
3. Click the 'Customize Style' tab and select the following check boxes:
" Suppress Empty Rows
" Suppress Empty Columns
" Suppress Row Grand Totals
" Suppress Column Grand Totals
4. Click the 'OK' button and then insert the cross-tab into the Report Header section.
5. On the 'Report' menu, click 'Format Sections'. Click 'Report Header' and select the 'Underlay Following Sections' check box.
When you run the report you will not see the cross-tab, but you will be able to scroll to the right and see multiple virtual pages.
====================
NOTES:
" As there are no rows to the Cross-Tab, it does not carry on to Page 2 and the virtual pages do not appear past the first page.
" To increase or decrease the number of virtual pages do one of the following:
- Limit the number of records for the field in the 'Column' box of the 'Cross-Tab Expert' using the 'Select Expert'.
- Change the width of the 'Column' field in the Cross-Tab by moving the edges of the field.
====================
How to Insert Fields on Virtual Pages
You cannot drag-and-drop a field onto a virtual page, you can only do so on the main page. To get a field to appear on a virtual page:
1. Insert the field on the main page.
2. Click the 'Preview' tab.
3. Drag the right edge of the field to the right, onto the virtual page.
4. Drag the left edge of the field to the right, onto the virtual page.
Hope this helps!!
Regards,
Shweta -
Hi Guys, my iphone 4 showing bad retina display and showing horizontal lines? What could be the problem???
Could be that your screen is damaged or dying. Only way to know is to bring the phone to Apple for evaluation.
-
my ipod touch 2nd generation keeps taking screen shots by itself and turning off. This is a 'NEW' replacement and is less than 12 months old. Any ideas?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I connected my Macbook Pro 2012 to a 1080p monitor, and the display is cut off at the top?
Hello,
I have just connected my Macbook Pro to a 1080p 23' LG monitor using a Displayport to VGI adapter. However, when I use the 1080p setting, it cuts off a little bit of the top bar. When I switch to lower resolutions, it works just fine. I would rather use it at 1080p, though. Is there a way to fix this?
Thanks,
HiTryxYou may need a display adaptor but can otherwise use a non-Apple monitor.
(109856) -
When I right click on a link, the usual menu I used to get in older versions of firefox still shows up. However, it shows up in a box that's much, much smaller than the size of the box in previous versions. The text gets cut off and while I can scroll up and down, I can't scroll left to right to read the text of the option. Actually, I've noticed that this happens with most right click menus now.
For example, if I right-click on a link, I get:
Open Li...
Open Li...
Open Li...
(down facing arrow to hover over to see the rest of the options)
All of the system and Firefox fontsize, menu size etc. are at their default. I haven't changed anything.You can check for problems caused by a corrupted localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Maybe you are looking for
-
My 4th gen iPod Touch won't charge
Hi, folks: Suddenly, my 4th generation iPod Touch won't charge. I don't mean it won't hold a charge; I mean it WON'T charge. There's no (peep!) when I attach it to a Mac, a Windows box, or to the wall. I've tried not only at my place but at my doctor
-
I'm kinda new to numbers on my iPad. I'm trying to change values in cells based upon the selection of a pop up menu. I'm sure this is simple, what am I missing? I have about 50 items (prices, descriptions, etc) and would like to create a pop up on sh
-
Convert sql_Varient to integers
i want to convert the Server_Name value from actual server name to 1 or 2 based on output, which i am already able to do in the code below,now i want to convert the data type of column "Server_Name" to integer after updating the values to 1 or 2pleas
-
Adobe flash player problem solved .... yay
i could not get the adobe to install on my mac, i rang the apple help line and they sorted the problem
-
Any way to have email address of the user in user level analysis report?
Hi, Is their any way to get the users email address column in User Level Analysis report Result..?? Any way or settings to add custom columns or the email address column in the displayed columns of the report ??