EPM Add-in for BPC 10.0 NW not able to install
Hello,
I am using BPC 10.0, EPM SP 16.1. Everything was working fine.
I had to install some windows updates. The updates wasn't helpful for all applications. So I have uninstalled IE 10.0 updates.
No I have IE 9.
After uninstalling the windows updates I am not able to install the EPM add-in. I am not getting any installtion errors.
However, it is not visible in the BPC Home page. Still showing "Install EPM Add-in for Microsoft Office" under 'Planning and Consolidation Administration" in the launch pad.
I think I am missing some required MS office or .Net4 SPs. But not sure which one.
Your valuable ideas/suggestions are most welcome.
Thanks and regards,
RJ
RJ
Kindly un-install the EPM Addin from Control panel and Again Reinstall it
along with the EPM Addin.exe, also run the patch .msp file (provided in the setup)
and also make sure u have the Microsoft Office (32 bit version) only
hope this helps
Regards
Bhupendra Arya
Similar Messages
-
Difference between EPM Add-in for Excel and BPC 10.0?
Hi Forum,
I'm currently researching an upgrade to version 10.0. We're currently running BPC 7.0 for MS. I'm confused at the moment, because I'm not sure if/what the difference is between the EPM Add-In and BPC 10.0. Can someone answer this?
I'm also not understanding the future roadmap for BPC 10.0 and beyond. It appears to me that an attempt to merge Business Objects functionality and BPC functionality into one product/suite of products is what is happening, but I could be wrong about that too. Can someone expand on this as well?
Thanks,
Mike
Edited by: hutchinsm on Oct 19, 2011 4:53 PMThe EPM10 Client (aka add-in) is the unified Excel interface for a subset of EPM products (Profitability and Cost Management, Financial Consolidations, Strategy Management and BPC). Clients did not like having different report writing paradigms in all of these applications, so the EPM10 Client was developed utilizing a technology called Extended Analytics Analyzer mashed with some of the BPC reporting functionality from BPC7.x to provide one stop shopping for accessing data in EPM applications. Additionally, the EPM10 Client can be used in many cases to report directly against native BW cubes or any other source that supports an ODBO connection.
BPC10 is the planning and consolidations application with the code engine to support the application functionality. If you purchase/upgrade to BPC10, the EPM10 Client is made available as an additional download to complete the package. In BPC10, the EPM10 Client is used both for reporting as well as for write back to the database for end users.
A new roadmap with BPC10 and beyond is just being finalized. Look for announcements around this in the next few weeks. -
Could EPM add in for Microsoft 7.5 and EPM add in for Net Weaver 10.0 work together
Good day,
We are going to start a new project, where the client already has EPM add in for Microsoft 7.5. We need to migrate this system to EPM add in for Net Weaver 10.0. When we would testing systems we need to have on the one local PC 2 products :EPM add in for Microsoft 7.5 and EPM add in for Net Weaver 10.0 to compare results. Is it possible to use them parallel? Is there any SAP documents or official materials where is information about this situation.
Many Thanks for the answear!Hi Natalia,
I have the same problem to migrate project, you can' t have both of them logged on at the same time
I solve my problem with a virtual machine, i use VMWare with BPC 7.5 version and host machine with BPC 10 Version.
I hope this will help you.
Regards,
Maycon Franco. -
EPM add-in for Excel question : How to send data from local member?
Dear experts,
for EPM add-in for excel, how do I send data from local member?
best regards,
Evans.Hello Evans,
Could you please explain what is your requisite? What is the formula on your local member?
You can also apply formulas to formatting sheet. This way you can reference the cells in your formatting sheet formulas and save the values in the report area.
Please check this blog:
How to use Excel formulas in BPC Input Schedules
Thank you
Best regards,
Raquel Oliveira -
Issues using EPM Add- in for Excel
Hello everybody,
I have installed the EPM add-in for Excel 2010 in one of my client computers, but we're facing two different issues in this machine:
1. Everytime he opens Excel the EPM add-in is disabled so he has to activate it each time he wants to use BPC.
2. When he opens an activity from the BPF that is related to a Excel file it does nothing (this BPF works fine in other computers)
I don't know if both issues are related but any ideas of why this could be happenning and how to solve them are welcome.
Thanks in advance,
NidiaHi Nidia,
Which version of excel are you using?
.net 3.5 or .net 4 version of epm add in?
maybe try the latest release, which is SP21 patch 1.
Andy -
I just bought a new printer for my iMac version 10.7 Lion but I am able to install the software but for some reason I am not able to view the printer under system preferences to add the printer. It is connected with the USB cord!! It as if the printer does not show up in the add printer section under system prefernces!!
I checked the manufacturer and apple site to see if my printer is supprted and it said it was!! I am using the HP officedeskjet 4500 G510a-f (HP Officejet 4500 Desktop)!! Still does not show up under add printers please help!!
-
Not able to install Essabse Excel Add in
Hi
I've installed and configured the Hyperion 11.1.2.1 on my Server Window 208 Rs 64 bit server. The Essbase Excel add in was not installed. So am trying to install ti manually. But am not able to do that. Am getting an error saying that the path that is given is not correct. Please help me out of this
Thanks in advanceYou say that you are not able to install the add-in and you get an issue in installing the Excel Add-in. Do you get the error mentioned when you try to install it?
Once the Excel add-in is installed you need to register it. Hence Register the Spreadsheet Add-in.
If you are getting error while opening Excel try the following --
1. Close Excel
2. Unregister Spreadsheet Add-in, select Start, then Programs, then Oracle EPM System, then Essbase, then Essbase Client, and then Unregister Spreadsheet Add-in.
3. Register Spreadsheet Add-in, select Start, then Programs, then Oracle EPM System, then Essbase, then Essbase Client, and then Register Spreadsheet Add-in.
4. Launch Excel and then check.
Regards,
HyperEPM -
not able to install onedrive for business, keeps telling its already installed but its not (W7)
after a change of the 365 office version OneDrive for business it is not possible to reinstall the software
it keeps telling me it is already installed.
I think some settings are still there from the old install.
how can I remove them or force the reinstallyeah finally
Problem solved! , my tube is back to normal ( to rock )
all i did is , removed the sys,private,system,resources,data folders from the memory card , switched off my phone , removed the memory card , did a soft reset (*#7370#) and tried to install an application from downloads , i was able to install in the phone memory as memmory card was not inserted then switched off the phone , inserted the memory card and tried to install an application from the downloads, finally i was asked where to install the app. and gave memory card , viola application installed sucessfully
Regards,
evil_night13 -
i got charged twice for a movie (Safe House). Can i get a refund for that? we were not able to finish the movie last night, and now we're trying to watch it again. We have an hour left, however the apple tv is still loading the movie again for 2 hrs & 46 mins.
Welcome to the Apple Community.
Apple's policy on sales of digital content is that all sales are final. If however you wish to appeal to Apple, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History. -
I just migrate settings and software, include CC, from my PowerBook to a new Mac Pro. All the software download from CC is there and working, except for CC, and there is not way to install. I have try because every time I restar keep bothering asking for installation, (by the way, the link is not up to date). Will appreciate your help.
never migrate adobe software. it should be properly installed.
uninstall all the cc programs you can, clean and then reinstall per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 -
HP Notebook - 15-ac043tu - NOT ABLE TO INSTALL WIFI DRIVERS FOR WINDOWS 7 -64 BIT
I baught HP Notebook - 15-ac043tu. I am not able to install wifi drivers in windows 7 home edition . I have downloaded all drivers from HP Link shown below, http://support.hp.com/in-en/drivers/selfservice/hp-15-ac000-notebook-pc-series/7771404/model/8326116#Z7_3054ICK0K8UDA0AQC11TA930C7 Can anyone help me ?
Hi I am facing a similar issue,Last week I bought my friend this Hp Notebook 15 (15-ac043TU) with DOS, I installed Win8 (64bit) and tried installing drivers from 'http://support.hp.com/, but its not accepting the WLAN drivers, I tried many, available for this model for win7 as well as for win8.1, wondering there was no win8 option, however it should work for Win8, I also followed your suggest but got the same error - "Update.cpp 1205" If you need Hardware Id, on 'Network Controller' - properties in devices manager, it is -PCI\VEN_14E4&DEV_4365&SUBSYS_804A103C&REV_01 Thank you and Regards:Gagan
-
Not able to install Windows 8.1 Update for x64-based Systems (KB2919355)
My laptop is dell vostro 1014.I have upgraded my laptop to windows 8.1 pro.I am not able to install Windows 8.1 Update for x64-based Systems (KB2919355)I got the following errors from windows event viewer:
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Internet Explorer 11 for Windows 8.1 for x64-based Systems (KB2964444) without KB2919355.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Windows 8.1 Update for x64-based Systems (KB2919355).
Anyone knows how to fix this error?
If I run the Reset Windows Update Components, I get this:Hi,
Considering that the security app or third part service may block the installation, please try the clean boot to install this update manually:
How to perform a clean boot
http://support.microsoft.com/kb/929135
If the issue still persists, please upload the cbs.log under
%WinDir%\Logs\CBS\CBS.log into Onedrive or similar network drive and share the link here.
Kate Li
TechNet Community Support -
I purchased 8 songs on September the 18th, for some reason I am not able to dwnload on to my ipod. When I try I get a error that the songs cannot be found. Wha t can I do?
have a look at this support article.
-
The wi-fi button on my iPad 2 is not functioning. I have tried resetting the network, worked for 5 minutes. Am not able to connect to internet to reset to factory. What else can I do?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I am not able to install adobe flash builder plugin 4.7 for myEclipse blue edition 2014
I am not able to install adobe flash builder plugin 4.7 for myeclipse blue edition 2014. Both are 64 bit and I have successfully installed adobe flash builder 4.7 and myEclipse blue edition 2014. Now the problem is not able to install the Adobe Flash Builder 4.7 Plug-in Utility.exe, while installing it asked for drop-ins folder after selecting that, it is saying the selected folder not contained Eclipse instance.
You don't have service pack 3 most likely. Refer to the tech specs:
http://www.adobe.com/products/flash-builder/tech-specs.html
Mylenium
Maybe you are looking for
-
Hi, may I ask a question? Is there any chances to have my iPhone 4S homescreen rotate to landscape view without jail breaking? Appreciate for any info~
-
How to call Function Module from webdynpro application ,up on click url in
Hi Experts, I need your help for the following scenario. In my WebDynpro application , I am displaying the sales orders in a table. one of the column in table i.e. sales order number is displayed with hyper link, up on click the sales order number c
-
Issue in getting off the probook 6555b in bios
Friends My laptop Temprature was at a high level. I changed the silicon paste The problem is that in the BIOS;fan speed before coming to the end and sometimes the system is shut off Ironically, I looked at Windows CPU temperature is less than 65 the
-
I have been testing leopard server and have run into a problem that puzzles me. I hope that somebody can provide some insights on this issue. Installed 10.5 server, advanced with mobile users and time machine backups. Upgraded mobile accounts from Ti
-
How to assign pages to workset and workset to roles in ep5sp6
hai, how to assign pages to workset and workset to roles in ep5sp6 . can any one help me in this regard . Regards praveen