EPM and EVDRE sorting changed in BPC 10

We feel that the expand function on base level (BAS) in both EPM and EVDRE have been changed from 7.5 to BPC 10. It is the sorting of members that we feel is wrong. It is not expanding on the order of the dimension but on what hierarchy level order the member has. This will render in strange sort order of the members. We got this answer from the support on this:
“By product design, I would like to confirm the changing of Member order for BAS Key of in BPC 10 (within EPM-Addin), comparing to 7.5 version for an EVDRE report. In version 7.5, the members are retrieved in the order of the dimension whereas in version 10, the members are retrieved by hierarchy level order (refer to the attached document "What's News" in PDF format, on the section page 11). By the way, you can change the default member order to ascending in version 10, please follow the steps below:
1. Click Edit Report and click the Dimension where the members need to be reordered to bring up the Member Selector window.
2. Click the Member Sorting & Grouping button and check the box next to Enable Member Sorting and click OK twice.
After these steps, the members should be in ascending order.”
This is actually not helping at all. It is then sorted based on numerical and alphabetical order. This is not good! Is there actually a need for sorting like this when you do it on a base level?
To explain what we would like to have then:
We would like it to sort as the expansion on “Descendants” (EPM) “ALL” (EVDRE) except for the calculated members which should be excluded.
Is there anyone else that feels the same as we do?

Hi Shrikant,
I posted an idea to SAP and got this answer. We have SP 19 so I will test it when we get the new version:
Other Terms
EPM add-in 10.0 SP20, resolved issues, FC (for Financial Consolidation), BPC (for Planning and Consolidation)
Solution
Once you have installed the EPM add-in, edit the the "FPMXLClient.dll.config" file in the installation directory and set the "UseHierarchyOrderForBaseLevelSelectionRelationShip" element value to "true".
Best Regards
Patrik

Similar Messages

My email address was recently hacked and they have changed all my passwords. Is there a way i can delete an ICloud account on my phone, mac and Ipad without putting the password in as i do not know this?

Hi
My outlook account was recently hacked and they have changed my passwords, secret questions and my information meaning i am unable to access this account. I have the hacked account set up on icloud for all of three apple devices. I have been reading online that to change or delete an account i need to login, or turn find my iphone off which i cannot do without the password!
I would be really grateful if anyone knew a way i could sort this out to fully delete the old icould account.
Thanks very much!

Contact the Apple account security team for your country and request assistance: Apple ID: Contacting Apple for help with Apple ID account security. If you can prove your identity to them, they can reset the password and help you regain control of the account.

I have moved from the US to Norway, and want to change my apple ID to the Norwegian appstore. However, I am not allowed ot change from the US store before I use up my balance, which is 0.17 dollar. The problem is that nothing costs 0.17 dollar.Please help

I have moved from the US to Norway, and want to change my apple ID to the Norwegian appstore. However, I am not allowed ot change from the US store before I use up my balance, which is 0.17 dollar. The problem is that nothing costs 0.17 dollar and I do no longer have an american visa card, only Norwegian. Is there any way I can erase the credit on my account so I can change the appstore country? Or osmething I can use this credit on? Thank you very much

Try contacting the store support staff at: http://www.apple.com/emea/support/itunes/contact.html they are usually pretty good at sorting out these issues.

I-photo: I used 2 cameras to take pictures on a trip --- i have put the pictures from both cameras into an album --- when i click on view and then sort by date, the pictures do not sort by date --- any ideas on how to get the pics sorted by date?

I-photo: I used 2 cameras to take pictures on a trip --- i have put the pictures from both cameras into an album --- when i click on view and then sort by date, the pictures do not sort by date --- any ideas on how to get the pics sorted by date?

Select all the photos that you need to change, then click the "Photos" menu and choose "Adjust Date and Time".
If you add a year, it will adjust all the photos that you selected by adding a year (so if you accidentally select one of the photos that already has "2012", that will change to "2013").

Drag and Drop to Change Order of a Collection

I have created a collection and now want to change the order of the photos in the collection. I try to select a photo to drag and drop it to the correct position.
Sometimes I can do this, other times I can't.
If I exit and reenter Lightroom, the problem of not being able to drag and drop is corrected.
Any ideas about a workaround for this bug without exiting and restarting Lightroom?
Thanks,
Harry

Harry,
You have to be at the lowest level of a folder/collection to get drag and drop to work.
If you have 'Include Photos from Subitems' unticked then you can sort in higher up folders/collections, but this only shows items in the actual collection/folder.
If you have images in multiple collections that you want to sort in order, select them and then Ctrl N (Cmd N on Mac ) to create a new collection. Tick the use selected photos box and name the new collection. Make sure it's at the bottom of a collection tree (or on it's own) and then sort inside the new collection.
When dragging, drag from the image itself, not from the border around it.

FaceTime and activate after changing operator?

FaceTime and activate after changing operator?

I recently changed my Apple ID and, initially hit all sorts of problems (ML & iOS5.1). AppleTV very confused, Calandar duplicating entries on an iPad, but losing them on the Mac (but being correct on iCloud.com).
The solution ended up being straightforward, if unnecessarily annoying.
On the Mac - in SysPrefs (iCloud) turn off all syncs and sign out. Delete items from the Mac (in response to the prompt).
On the iPad - in settings do the same.
On the ATV - turn off Home Sharing.
In iTunes - log out of the Apple Store
Sign out on iCloud.com and sign back in using a @me.com email address (not the Apple ID)
Reestablish iCloud sync (etc) by signing in using the email address (not the ID).
It appears that everything collects the new Apple ID using the email address and they all play nicely together again.

SAP and Excel sorting

SAP and Excel sort the dash (u201C-u201C) character in different ways. Since the dash character shows up in a number of our material numbers, this causes issues when mass-loading lots of changes using MM17. Has anyone been able to change the sort types to match?

Default sort orders In an ascending sort, Microsoft Office Excel uses the following order. In a descending sort, this sort order is reversed.
Value Comment
Numbers   Numbers are sorted from the smallest negative number to the largest positive number.
Dates   Dates are sorted from the earliest date to the latest date.
Text   Alphanumeric text is sorted left to right, character by character. For example, if a cell contains the text "A100," Excel places the cell after a cell that contains the entry "A1" and before a cell that contains the entry "A11."
Text and text that includes numbers stored as text are sorted in the following order:
0 1 2 3 4 5 6 7 8 9 (space) ! " # $ % & ( ) * , . / : ; ? @ [ \ ] ^ _ ` { | } ~ + < = > A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Apostrophes (') and hyphens are ignored, with one exception: If two text strings are the same except for a hyphen, the text with the hyphen is sorted last.
Note    If you have changed the default sort order to be case-sensitive through the Sort Options dialog box, then the order for alphabetic characters is the following: a A b B c C d D e E f F g G h H i I j J k K l L m M n N o O p P q Q r R s S t T u U v V w W x X y Y z Z
Logical   In logical values, FALSE is placed before TRUE.
Error   All error values, such as #NUM! and #REF!, are equal.
Blank cells   In both an ascending and descending sort, blank cells are always placed last.
Note    A blank cell is an empty cell and is different than a cell with one or more space characters.
Possibly sap uses a different strategy for sorting hence you are getting different results.
Also check this
http://help.sap.com/saphelp_nw04/Helpdata/EN/fc/eb3800358411d1829f0000e829fbfe/content.htm
Regards,
Vaibhav B Gawali.

APEX 4.0 -Show and able to change Primary key values for Detail

In a Master-Detail form, is there anyway I can show and able to change/select my primary keys from a select list field? One of my primary keys on the Detail is also primary key from another table which restricts my values for this field. I was able to show the fields but I can not make changes to this field and save the changes. Is there anyway I can have both show the field and able to change field's value and save it? Please advice. Thank you very much for your help in advance.
-Grace

Yes AFAIK Apex (for better or worse) was designed such that the PKs are generated automatically with PL/SQL, by a trigger, or whatever other algorithm that isn't in the control of the end user. It also only seems to allow a composite PK of no more than two columns.
My usual strategy is to:
1. Define the PK as a number (some sort of RECORD_ID, RECORD_SEQ, whatever) and populate it via a trigger on-insert.
2. Define the "business" PK as a separate unique index. This way the user can set and modify it to their heart's content and it also isn't limited to just two columns (if the composite key's business requirement is such that more than two columns are needed).

TS1398 my network but just hangs when trying to connect? I've have reset the settings and all sorts? My iPhone can connect fine? Any advise would be great!

My iPad can see my network but just hangs when trying to connect? I've reset the settings and all sorts? My iPhone can connect fine? Any advise would be great!

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

The volume on my iPad 3 has gone. I've checked the mute button, tried restarting, resetting etc and nothing has changed. I can't hear the music, hear any sound from videos. Most times the video stops playing after a seconds. My iPad 3 is only 2 months ol.

The volume on my iPad 3 has gone. I've checked the mute button, tried restarting, resetting etc and nothing has changed. I can't hear the music, hear any sound from videos. Most times the video stops playing after a seconds. My iPad 3 is only 2 months ol.

If you have lost all sound and video is freezing on you, that ain't good. Your iPad is two months old so I would not hesitate to contact Apple at all. You are entitled to 90 days of phone support.
http://www.apple.com/support/ipad/contact/.
If you want to try a couple of things on your own, try quitting all apps and then reboot the iPad - not so much for the sound issue itself - but more as a general "start all over again" sort of approach. It might help with the video freezes.
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Reboot the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If you use headphones on occasion, you can try plugging and unplugging those as well and see if the sound comes back.
You could even try restoring the iPad to factory settings and then restore from a backup, but unless there is something totally hosed on the iPad, that should not be necessary with a two month old device - of course assuming that you didn't drop the iPad or do something accidental that could be causing the problems.

How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk

How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk.i did try all the options but I can not find the phone number to call from Croatia,
I can not change my Apple ID to the old mail (not possible!)
The old mail don't accept the new password..
I can not delete the Icloud all the time asking my the password of the old mail!
I realy need help

You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.

Wrong folder and report sorting

We installed BO XI R2 SP4. Folder and report sorting is incorrect. How to fix that?

Hi Wallie,
we just started our mirgation from 6.5 to XI
so BO XI SP4 on .NET is our first XI installation.
Sort order is incorrect for both folders and objects
and for both asc and desc orders.
Most of folders/objects are sorted correctly but several of them are out of order.
Examples:
__ASC order__                            DESC order
Class                                        User
Customer                                  Report Samples
Data                                         Report Conversion
Document                                 Feature
Accident                                   Admin
Admin                                       Accident
Feature                                     Document
Report Conversion                      Data
Report Samples                         Customer
User                                         Class
I believe it gives the picture.
Valentin.

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verif

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?

Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
See http://www.alsoft.com/diskwarrior/

Please help me, I gave my information out to a person and he has changed all my information and now I can't get in.. I know the persons name

Please help me, I gave my information out to a person and he has changed all my information and I can't log back in.
Adrian Lee is the person I gave it to.
He told me to email him my information so he can level me up in the game Clash of Clans so I did and he changed all my information and I told him to give it back via email and he refused but suggested to restore my iPod and it would go back to normal and I dis, I nearly lost everything since I haven't backed it up for a while and I'm a Music Producer, this password is my paycheck, my food, my rent, my everything, now I'm not sure if this is the right place to go to but please help me. i'm begging you to please restore my password.. I'm not asking for anything of what I lost back, just my password so I can change it, get my things back and move on with my life. I have really back anxiety attacks. Please. I'm begging you. You guys are my last chance..
<Emails Edited By Host>

If you can't contact the person and get the information back then:
- Contact the police for help
- Restore from backup.
If you can't get it from the person or from a backup then it is lost.
In the future be carrful about who you give your login information to.

Hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

Hey there Logic Pro21,
It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
Logic Pro X: Troubleshooting basics
http://support.apple.com/kb/HT5859
Verify that your computer meets the system requirements for Logic Pro X
See Logic Pro X Technical Specifications.
Test using the computer's built-in audio hardware
If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
Start Logic with a different project template
Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Isolate an issue by using another user account
For more information see Isolating an issue by using another user account.
Reinstall Logic Pro X
Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
In the Finder, choose Applications from the Go menu.
Locate the Logic Pro X application and drag it to the trash.
Open the Mac App Store
Click the Purchases button in the Mac App Store toolbar.
Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
Click Install to download and install Logic Pro X.
Thank you for using Apple Support Communities.
Cheers,
Sterling

EPM and EVDRE sorting changed in BPC 10

Similar Messages

Maybe you are looking for