EPM Configurator showing the old DB Details
Hi,
We are using Hyerion Financila Management 11.1.1.3 application. Recently we have migrated the Oracle Database to another server. So I re-configured the database details to point to the new database server through the EPM Configurator. When I re-opened the EPM Configurator, It is still showing the old DB details. Please could you help me to resolve this issue. But The configuration xml files have changed and it contains new database details.
Thanks,
Aravindh K
It possibly could mean that the reconfiguration was not successful, I know in that version you can end up only updating the reg.properties and not the actual database configuration.
The process is in the following Oracle Support doc :
How To Change Shared Services Database Repository in EPM 11 (Doc ID 976279.1)
Cheers
John
http://john-goodwin.blogspot.com/
Similar Messages
-
The Messaging Engine failed to retrieve the configuration from the database. Details:"c0002a1f".
Hi All,
We have two BizTalk nodes, from both nodes we are getting this error from today morning, nothings has changed from application end.
Error : The Messaging Engine failed to retrieve the configuration from the database. Details:"c0002a1f".
Warning : Cannot perform encryption or decryption because the secret is not available from the master secret server. See the event log for related errors.
Can you please suggest step where need to check.
I don't have any knowledge where the master secret file saved during installation.
Regards
SumanMost of the time, master secret server is not backup frequency. Mostly its is done during the time when the servers have been setup. If anything changed between the time the master secret has been backed up and now, then you don't have the correct version
of master secret file backed up. This is why its is always a good practice to backup the master secret periodically and also try restoring in any of the test server to verify the backed up file is correct and also to make us conformable in restore
process.
You have one option now, try restoring with the file what you have (4 years old). If the backed version is not the correct version, then only option is to reconfigure the BizTalk.
MSDN: How to Restore the Master Secret
You cannot backup the master secret file now as ii could have been corrupted. That the reason we're suggesting to restore the corrupted master secret file. For your future reference, following the steps as suggested in this article to take backup of master
secret.
MSDN: How to Back Up the Master Secret
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?
The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. -
My email recently changed and so I updated my Apple ID to reflect my new email, but my Icloud account still shows the old email as the username on both my Iphone and Ipad and for the life of me I can't figure out how to change or delete it. My password doesn't work with the old email address. When I look for my old email address in the Apple ID support area it says that the ID doesn't exist. Help!!!
You have to go to Settings>iCloud and tap Delete Account, then sign back in with your updated credentials. This deletes the account and your synced data from your device, but not from iCloud. Provided you are signing back into the same account and not changing to a different account, your data will be synced back to your device when you sign back in.
-
I changed my Apple ID but on my iPhone 4S w/ iOS 7.0.4, when I go into settings > iCloud it still shows the old Apple ID. How do I change this? I was going to delete the iCloud account from my phone then add it back with the new Apple ID, but I'm not sure...help!
http://support.apple.com/kb/TS5223?viewlocale=en_US
Peace, Clyde -
Payment run is picking up the old bank details of the vendor
Hi Experts,
Following is the issue :
1. Vendor invoice entered through MIRO/FB60. This picks up the prevalent bank details from the vendor master.
2. Vendor bank details are changed subsequently and payment run made. The payment run picks up the old bank details ( from the invoice document if it saves any where for the posted document ) and not the current details as in the vendor master.
3. Payment is returned from the bank as previous bank details are not valid any longer.
4. I canceled/reversed the MIRO/FB60 document alongwith the payment document.
I re-enter the same invoice through MIRO/FB60. It picks up the current bank data from the vendor master(which are the new bank details and are correct).
5. Then I make the payment run but the payment still goes to the previous bank details (which were changed and are no longer valid) and not to the current details(which are on the invoice) and is again returned by the bank.
What is the reason and how to correct this issue. Your early reply will be really appreciated.
Thanks & Regards,
BABAHi,
By default the payment will go to the bank that is listed first in the vendor master. If you do not need the old details, delete them completely from the master data and leave only the new ones. Alternatively use the Partner Bank field to assign the invoice to which Bank the payment is to be made.
Kind regards -
Hello,
I need to add my new ipod to itunes.
itunes will only show the old, dead ipod that my niece had given me secondhand.
I just got a new one and want to put in it's serial number, etc. but keep the music.
Please help, I've been going around in circles online for hours. I don't want to merely change the name of the old ipod, which is the only info I can find.
Thanks."In addition, I would like to get all of the music files that are already on my ipod on to my new computer"
Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
The music files should transfer to your iTunes.
However it appears that no playlists or any other info such as ratings/last played etc will transfer.
If this is important to you, you may want to use other options.
There's Yamipod. This is a free program that transfers music and playlists etc from iPod to iTunes.
Once the music from your iPod is in your new iTunes library, you can go about adding new music as you did previously. -
I recently changed my email address at the online iTunes website. Now I can't update my apps because the log-in shows the old email address, but won't accept the old password. How do I fix this?
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Note:
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622 -
I have change my Apple ID and iCloud continue to show the old ID
This is a guess, but did you try using the iCloud panel of System Preferences to log out of your old account and into your new one?
-
How do I change the Apple ID that is stored on my MacBook Air. I have changed my Apple ID on the Apple ID website but both my MacBook Air and my iMac show the old Apple ID when accessing iCloud.
I had this problem on my iMac and fixed it after a half hour of frustrated trying. I had changed my Apple ID on my iPad mini while traveling. When I finally got back home after a few months, I couldn't log in to iTunes on my iMac. The old Apple ID was still being used on my iMac. I tried just highlighting it and deleting it and typing in my new Apple ID. No dice. The login just defaulted to my old Apple ID. I tried clicking on the drop down menu that appears when you right right click your Apple ID that appears at the top of the page after highlighting the 'iTunes Store" in the left side list. I saw "account" so I clicked on that. The "account" settings on my iMac showed my new Apple ID but my iMac wouldn't use it. It just kept defaulting to my old ID. I shut down. I logged back in. Same result. Finally I right clicked the same drop down menu and saw "sign out" at the bottom of the list. Even though I was not signed in to iTunes, I clicked "sign out". My next log in to iTunes showed my Apple ID as blank and I was able to type in my new ID. Hope this helps.
I am a long time 20 year Microsoft user. I am somewhat ( 1 year) new to Apple. With Microsoft, I found that fixing problems was clunky and complex, but there was always a post somewhere that explained the fix. Microsoft's explanations stated even the most obvious fact. Even if everyone knew that the sky was blue, Microsoft's instructions would still tell you that the sky was blue. With Apple, I find that the obvious is sometimes not so obvious. But the fix is almost always easy once you find it, without many of the elaborate maneuvers needed in Windows. -
I have a new e-mail account so I changed my Apple ID in itunes. My ipod is still showing the old ID. How can I change it?
Go to Settings>iTunes and App Store and tap the Apple ID, select logout. Then login with your new ID
Note:
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account. -
After recently changing my email address on my iphone 4, am now having problems signing into the apps using my apple id....I have the apps still showing the old email address...and the password has not changed....can anyone tell me how to fix this? Thank you in advance...
You've updated your iTunes account to have your new email address on it - you might need to log out of your account by tapping on it at the bottom of the Featured tab in the App Store app and then log back in with the updated version of your account so as to 'refresh' the account on it.
-
I have changed my photo on my IPhone contacts. But when I txt on my mac, it still shows the old photo. How do i fix this?
RDA972, thanks for the reply.
Yes i am using a PC, i just wanted to ask before rebooting the laptop and disabling the Hyper threading,Is it possible to have a unfinalized Premier Pro project saved as a Adobe premier file on to my USB, then that saved file on the USB stick, inserted into a different Laptop that wasn't originally used to make the Premier Pro project, but has Adobe Media encoder and adobe creative cloud in the same version.
the reason i asked this is because this is my situation and i was wondering if the different Pc had anything to do with the exporting -
Pages, Numbers and Keynote won't update. App Store says update was applied, but when I open Pages/Number/Keynote, the version of it shows the old version.
When you updated, the old version remained on your Mac, in a subfolder within Applications named iWork '09. Any icons you have on the Dock still point to that old version. Try opening the Numbers that is located in your main Applications folder, not the one in the subfolder. If that works, then drag that one to the Dock.
SG -
I changed my Iphone 4 ID account, but during the update and download still showing the old ID
All apps, all paid and free apps include DRM protection which is tied to the iTunes account or Apple ID that was used to download the apps.
You must use the iTunes account or Apple ID that was used to download an app in order to install an app update.
Not possible to transfer apps from one iTunes account or Apple ID to another and the same for merging accounts.
Maybe you are looking for
-
Any way to correct sorting by date in new Apple TV?
I've recently upgraded to the "new" Apple TV (the little black one), after many happy years of using the old Apple TV v1, but I've run into an odd problem. About 50% of my iTunes library is purchased from the iTunes store, the rest is stuff I've adde
-
FI Validation Exit: how to disable system standard message "Correct the..."
Hi, I had setup a FI validation exit. In the source code of this validation, I raise an error message, if any. For example: LOOP AT t_messages_return. MESSAGE ID t_messages_return-id TYPE t_messages_return-type NUMBER
-
How to sync safari passwords to my iPhone 6
i can't seam to get the passwords in safari in to safari on my iPhone 6
-
How to configure fiscal variant
Hi , Please provide me some steps or doc's related to Fiscal variant config Krish
-
Download adobe creative suite 6 from adobe website instead of using CDs
I do not have a cd/dvd drive on my laptop can I just download the programs from the site and if so how?