EPM system stop

Gurus,
I have questions regarding properly stopping EPM system. Here is the scenario:
We have two servers: one has the Oracle and Essbase DB, and the other has the applications. We are planning on installing Microsoft patches on the servers so we need to stop the EPM system so that we can install the patches.
My questions are:
Since we have two servers, one DB and other application, is there a rule regarding which one we need to stop first? OR can we stop whichever we want to?
Other question is, in stopping the DB server, what would be the logical way of stopping. Oracle DB first and then the EPM system? OR it does not matter?
Any suggestions/advice would be greatly appreciated.
Thanks

If you are on V9 or later, You should be stopping EPM services in order to make sure nothing gets 'effected'. Usually the guys who install EPM software create batch files to stop and start all services in order. If you don't have the script, your should atleast stop EPM services before turning your DB off.

Similar Messages

11.1.2.3 Essbase Admin Server stopped ??? where is the EPM System Registry located

Whereis the Location of the EPM System Registry !!!!
I have complete the .3 install and config of essbase and Planning completely set planing, made a snapshot of my VMware system and shut down the server
this morning logon to my Laptop Started EPM system
and now my Essbase Administation Server
EPM System Registry configuration.r / Localhost:900 = Stopped
I Restarted my EPMSystem then
stop and started Essbase Administation Server
but it is stated it was stopped
went to
Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\essbase\essbase/Essbase
[Wed Jan 08 06:39:17 2014]Local/ESSBASE0///6996/Error(1051683)
Attempt to retrieve connection information from the registry failed. Please check reg.properties file and try again.
and
COracle\Middleware\user_projects\epmsystem1\diagnostics\logs\essbase\essbase/Essbase_odl
[2014-01-08T06:39:17.203-05:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
LOOK AS IF THERE IS A ISSUE WITH THE EPM System Registry
Oracle EPM System
Diagnostics
everything Failed ??
Hyperion Foundation
FAILED Audit Validating that Audit has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
FAILED CES Validating that CES has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Web Server: Pending
Configure Database: Pending
Configure: Pending
Configure Common Settings: Pending
Configure Oracle Configuration Manager: Pending
0 seconds
FAILED CSS Validating that CSS has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
FAILED EXT: External Authentication Checker execution failed.
Error: EPMCSS-00000: Failed to process request. Internal server error. Refer EPM Shared Services Security log file for related errors.
Recommended Action: Refer to the validation logs for exception details.
8 seconds
FAILED HUB Validating that HUB has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
PASSED WEB: Permissions All HIT entries are present in system-jazn-data.xml
0 seconds
FAILED LCM Validating that LCM has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
FAILED Single Sign-On Checker execution failed.
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
2 seconds
FAILED LNK: Registry Checking that all components in the registry have a link to host
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
0 seconds
PASSED CFG: Environment Checking whether system path variable length exceeds 2,000
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component SHARED_SERVICES_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
FAILED Registry Validating that Registry has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
EPM System Registry
Essbase / Essbase
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Essbase Server: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Essbase / Essbase Administration Services
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Database: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_ADMINISTRATION_SERVICES_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Essbase / Essbase Integration Services
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Essbase Integration Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_INTEGRATION_SERVER_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Essbase / Essbase Studio
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Database: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_STUDIO_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Essbase / Provider Services
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Foundation / Calculation Manager
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Database: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component CALC_MANAGER_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Foundation / Performance Management Architect
FAILED AppMgrLoadAdf Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_35/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.appmanager.AppMgrLoadAdf
Error: AppMgrLoadAdf failed on initialization. Please check all registry information is valid and that HSS is running.
Recommended Action: Make sure external checker is working.
9 seconds
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Create EPMA Virtual Directory: Pending
Configure Database: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED DimEditorLoadAdf Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_35/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.dimeditor.DimEditorLoadAdf
Error: DimEditorLoadAdf failed on initialization. Please check all registry information is valid and that HSS is running.
Recommended Action: Make sure external checker is working.
9 seconds
FAILED EnumApplications Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_35/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.repository.EnumApplications
Error: EnumApplications failed on initialization. Please check all registry information is valid and that HSS is running.
Recommended Action: Make sure external checker is working.
9 seconds
FAILED EnumDataSyncs Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_35/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.repository.EnumDataSyncs
Error: EnumDataSyncs failed on initialization. Please check all registry information is valid and that HSS is running.
Recommended Action: Make sure external checker is working.
9 seconds
FAILED EnumDimensions Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_35/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.dimeditor.EnumDimensions
Error: EnumDimensions failed on initialization. Please check all registry information is valid and that HSS is running.
Recommended Action: Make sure external checker is working.
9 seconds
FAILED PMAJ: EPMA Service Validating whether jobmanager service is available.
Error: EPMVLD-01006: The EPMA service is not available. Check the log files for details.
Recommended Action: Check that the server is running.
0 seconds
FAILED DSC: EPMA DimensionServer Server Configuration Validating EPMA Dimension Server hyperion-bpma-server startup... Failed...
Error: Dimension server was not found in Shared Services Registry.
Recommended Action: Check application is started.
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component EPMA_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Foundation / Workspace
PASSED CFG: Configuration Validating that configuration tasks have been completed
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component WORKSPACE was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
PASSED REG: Registry All links are present in the registry.
0 seconds
Planning
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Database: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component PLANNING_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Test start time: 01/08/2014 07:07 AM
Test end time: 01/08/2014 07:08 AM
Total test duration: 87 seconds
Please advise
Thanks

John it happen again
so i look at the Oracle Database Instance and it is up ?????
Database Instance: ORCL
Page RefreshedJan 9, 2014 3:18:20 PM ESTView DataManuallyAutomatically (15 sec)Automatically (60 sec)
General
Status Up
Up Since Jan 9, 2014 1:18:26 PM EST
Instance Name orcl
Version 11.2.0.1.0
Host localhost
Listener LISTENER_localhost
Please advise

EPM system security is not initialized properly

Hi,
We are in the process of installing 11.1.2.2 on Windows 2008 server.
Step 1. we installed Foundation Service, Reporting and FM
Step2. 1st did configuration of foundation service and Performance Management Architect
Result - Successful. Was able to login to workspace ans shared service
Step 3. 2nd we Configured Financial Management.
Configuration was successful.
All services are running but we are not able to login into workspace.
We are geting following error in log file of HyS9EPMServer
"EPM system security is not initialized properly"
Any help will be appreciated.
Edited by: user8638468 on Aug 15, 2012 9:42 AM

Yes Vivek.
We did run Foundation Service --> Configure Web Server after configuring HFM module. It was susccessful.
After that we run "Start EPM System". Then everything stopped.
While installing HFM in 2nd leg on "Configure Database" screen we selected "Perform first-time configuration of database".
Entered username HFM.
We noticed that after installation EPMSystemRegistry-jdbc got changed.
Path is C:\Oracle\Middleware\user_projects\domains\EPMSystem\config\jdbc\EPMSystemRegistry-jdbc.xml
<value>HSS</value> got changed to <value>HFM</value>
I are not sure but I think we should have selected "Connect to a previously configured database".
I am going to install it again and will update the forum.
-Devidas

Users assigning in EPM System Security mode

Hi,
I installed and Configured EPM 11.1.2 on Unix operating system successfully.
After configuring the Essbase Components configured the external user directory:Microsoft Active directory and changed the Security from Essbase mode to Shared services mode.
My question is I am able to view only Native users as username@Nativedirectory not Active Directory users as username@MSAD in EAS console under list of users even after provisioning them to Essbase Server from Shared Services Console.How can I provision them to view through EAS Console?
At the same time I am unable to view through EAS console the list of users(Native Directory +Active Directory) assigned to a Native directory Group created in Shared Services Console.
Can any one share your inputs on the same.

Yes Vivek.
We did run Foundation Service --> Configure Web Server after configuring HFM module. It was susccessful.
After that we run "Start EPM System". Then everything stopped.
While installing HFM in 2nd leg on "Configure Database" screen we selected "Perform first-time configuration of database".
Entered username HFM.
We noticed that after installation EPMSystemRegistry-jdbc got changed.
Path is C:\Oracle\Middleware\user_projects\domains\EPMSystem\config\jdbc\EPMSystemRegistry-jdbc.xml
<value>HSS</value> got changed to <value>HFM</value>
I are not sure but I think we should have selected "Connect to a previously configured database".
I am going to install it again and will update the forum.
-Devidas

EPM System Configuration Error

Hi, Gurus
When am re-configuring EPM system, I got below error message.
<Font color="Red">
"The port number is already used by another application. Specify a port number that is not being used." </font>
I want to delete the previously configured ports and applications. what is the best method to reconfigure the EPM system without uninstalling the software?
Thanks for your help in advance.
regards
Sarilla

The port number in use indicates something is actually running at currently at that port. Make sure you have all services stopped before reconfiguring, check task manager for any residual processes to kill, or reboot and make sure nothing is running.
Nick

SharedServices and Workspace URL's are not working in EPM System 11.1.2.2

Hello,
SharedServices and Workspace URL's are not working in EPM System 11.1.2.2
I have installed EPM system V11.1.2.2 in single server environment (MS 2008 Server R2) with following components:
* Foundation Services
* HFM
* FDM
Have used embedded Weblogic server as application web server and Oracle HTTP server as web server. The installation was successful.
While configuration,
1) I selected the option to deploy web applications SharedServices and Workspace to a single managed server. The applications got successfully deployed to EPMServer0.
2) Also, I selected to configure Oracle HTTP server as web server.
Both these steps were successful.
But SharedServices and Workspace URL's are not working. Getting 404 error.
SharedServices : http://inmum01hyp05.internal.vodafone.com:19000/interop/index.jsp
Workspace : http://inmum01hyp05.internal.vodafone.com:19000/workspace/
When I checked Weblogic admin console, EPMServer0 is in SHUTDOWN state, tried to start it but it goes in ADMIN state instead of RUNNING.
Checked EPMServer0 log at "D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs" and found the error given at the end of this message.
Can anyone please suggest a solution for this.
####<Jun 6, 2013 11:43:20 AM IST> <Emergency> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499200246> <BEA-149259> <Server 'EPMServer0' in cluster 'EPMServer' is being brought up in administration state due to failed deployments.>
####<Jun 6, 2013 11:43:20 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499200902> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceHttps for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201090> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceJms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201090> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseService for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201106> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Jms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201121> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12 for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201121> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Https for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebLogicServer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201137> <BEA-000256> <Invoking weblogic.transaction.internal.StartupClass.main(null)>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201168> <BEA-149059> <Module dms.war of application DMS Application [Version=11.1.1.1.0] is transitioning from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201168> <BEA-149060> <Module dms.war of application DMS Application [Version=11.1.1.1.0] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:22 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499202402> <BEA-149059> <Module /inspection.wsil of application wsil-wls is transitioning from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:22 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499202402> <BEA-149060> <Module /inspection.wsil of application wsil-wls successfully transitioned from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:44:13 AM IST> <Info> <Diagnostics> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1370499253433> <BEA-320000> <The Diagnostics subsystem is initializing on Server EPMServer0.>
Thanks in advance.
Tej

Hi John,
today's update:
* Uninstalled EPM system V11.1.2.2 completely and after rebooting the server installed EPM system V11.1.2.2 again.
* During configuration, deployed SharedServices and Workspace to single managed server EPMServer0 on Weblogic server and configured to Oracle HTTP server as web server. Configuration seems successful.
* Started EPM system.
* checked Weblogic admin console - EPMServer0 goes into ADMIN state from STARTING.
* Checked EPMServer0 logs at "D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs" and found the error given below:
####<Jun 7, 2013 2:12:14 PM IST> <Error> <Deployer> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594534718> <BEA-149205> <*Failed to initialize the application 'SHAREDSERVICES [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: epm-hss-libraries, exact-match: false]..*
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: epm-hss-libraries, exact-match: false].
     at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
####<Jun 7, 2013 2:12:15 PM IST> <Warning> <J2EE> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594535124> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: epm-bpmui-libraries, referenced from: D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\WORKSPACE_11.1.2.0\riys07]. Make sure the referenced optional package has been deployed as a library.>
####<Jun 7, 2013 2:12:15 PM IST> <Error> <Deployer> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594535186> <BEA-149205> *<Failed to initialize the application 'WORKSPACE [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.applcore.model, exact-match: false], [Extension-Name: xerces, exact-match: false]..*
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.applcore.model, exact-match: false], [Extension-Name: xerces, exact-match: false].
     at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
Can you please suggest how to overcome this error of Weblogic?
Thanks in advance,
Tej

EPM System Configurator Error

Hi,
I am trying to open EPM System Configurator but getting error:
"The Vital Product Data registry is in use by another installer. Please start this installer after the other installtion is complete."
I am not installing the EPM system. It is already installed. I am just trying to open EPM System Configurator by Start--All Programs--EPM System--Foundation Services-- Start EPM System Configurator
I am not running any othe installer. I tried restarting the system also but again I am getting the same error.
Please help me with this error.
Thanks & Regards,
Akshat

Hi Srikanth,
I am not running any othe installer. I tried restarting the system also but again I am getting the same error.
Actually I am trying to integrate OBIEE with EPM workspace.
I am following the below link:
http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/e10416/general_10134.htm?bcsi_scan_6E125C62D30562F9=0&bcsi_scan_filename=general_10134.htm#BEHGEFEI
I am facing the problem at step -- 11.5.3.6 Configuring the Web Server for EPM Workspace
Regards,
Akshat
Edited by: user10943765 on Oct 1, 2010 10:57 PM

Weblogic 9.2 MP3 Issue with EPM System 11.1.1.3

Hi,
I am currently running into issues when trying to configure Shared Services via the EPM System Configurator 11.1.1.3. I've installed Weblogic 9.3 MP3 with all of the default options (including establishing Node Manager as a service). I've also created a seperate userId in Weblogic called hyperion (with the password of hyperion) so that EPM can access the instance against the default web server.
When I run the configurator to try and deploy to application server, the status sits there on the "Starting WebLogic 9 Admin Servers" and does nothing.
Sometimes is does get past that but then the deployment fails because it is unable to deply the interop.war.
Any help would be greatly appreciated as I'm 100% stuck!
Thanks,
Anju

The Hyperion EPM forum is here:
Hyperion EPM
You'll probably have better luck there.

Kernel-Power Event ID 41: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

Hello, Currently we are seeing this issue with a couple of our Lenovo T420s laptops with a Solid State Drive. ruffly about 10 or so. The Reboots happen randomly and do not create a dump file. We have contacted Lenovo and they are
not sure why its happening. Since this Crash I set it for Minidump this did not work my next steps will be to Disable Automatic restart on System Failure to see if it brings anything up. I am also looking at using Procmon to dump to a file as well.
If anyone has any other ideas please let me know.
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
+ System
- Provider
   [ Name] Microsoft-Windows-Kernel-Power
   [ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
   EventID 41
   Version 2
   Level 1
   Task 63
   Opcode 0
   Keywords 0x8000000000000002
- TimeCreated
   [ SystemTime] 2012-02-01T00:02:48.677610900Z
   EventRecordID 8270
   Correlation
- Execution
   [ ProcessID] 4
   [ ThreadID] 8
   Channel System
   Computer LR8K6TLC.cntr.thrivent.corp
- Security
   [ UserID] S-1-5-18
- EventData
BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 129725280988099400
Event 89, Kernel-Power
ACPI thermal zone ACPI\ThermalZone\THM0 has been enumerated.
_PSV = 0K
_TC1 = 0
_TC2 = 0
_TSP = 0ms
_AC0 = 0K
_AC1 = 0K
_AC2 = 0K
_AC3 = 0K
_AC4 = 0K
_AC5 = 0K
_AC6 = 0K
_AC7 = 0K
_AC8 = 0K
_AC9 = 0K
_CRT = 371K
_HOT = 0K
_PSL - see event data.
---- Details
+
System
Provider
[ Name]
Microsoft-Windows-Kernel-Power
[ Guid]
{331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID
89
Version
0
Level
4
Task
86
Opcode
0
Keywords
0x8000000000000020
TimeCreated
[ SystemTime]
2012-02-01T00:02:49.270411900Z
EventRecordID
8271
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
68
Channel
System
Computer
LR8K6TLC.cntr.thrivent.corp
Security
[ UserID]
S-1-5-18
EventData
ThermalZoneDeviceInstanceLength
21
ThermalZoneDeviceInstance
ACPI\ThermalZone\THM0
AffinityCount
1
_PSV
0
_TC1
0
_TC2
0
_TSP
0
_AC0
0
_AC1
0
_AC2
0
_AC3
0
_AC4
0
_AC5
0
_AC6
0
_AC7
0
_AC8
0
_AC9
0
_CRT
371
_HOT
0
_PSL
0000000000000000
Thank you.

We have tested and checked both the Bios and firmware of the SSD Drive's
Bios was up to date and no issue
Firmware was also up to date as well.
Users are still experiencing random Reboots.   I tried to capture the issue with Procmon but since the PC shutdown (Goes to a black screen no power at all even when turning the "Automatically
restart" off under Startup and Recovery) No dmp files as of yet. Unable to configure Procdump due to not knowing where the issue is and what is causing it to happen.
Going to replace one of the PC's with a New one with different hardware to see if this resolve the issue. If anyone has any idea's to be able to capture what maybe happening that would
be great.
Thank you.

Unable to launch th EPM SYSTEM CONFIGURATOR in EPM 11.1.2.1

Hi Experts,
I have Installed EPM 11.1.2.1 with ESSBASE,HFM,PLANNING,FDQM.While Iam going for launching the Epm system Configurator it is unable to launch for Configuration.It is throwing error like
Fatal Error:Windows\System32\system32 not present in path wait for 30....
Please give me suggestions in detail becuase i am new to this Epm 11.1.2.1 Installation
Thanks in advance

Hi ...
Just looking the issue and needed some more information to know the cause...
Have you installed HFM 11.1.2.1 for 32 bit or 64 bit ?
If you have installed 32 bit... than have created environment variables as defined in installation guide.
Thanks & Regards
Kiran TR

Restarting order for epm systems in distributed environment

hello everone ,
Q. 1 can I know safe restarting order for epm systems in distributed environment where I have 7 servers which have different epm applications.
and in which order i should start services ?
version is hyperion 11.1.2.1
Q. 2 also I am getting this error while refreshing database from planning application.
com.hyperion.planning.olap.EssbaseException: Network error [%s]: Cannot Receive Data (1042013)
this error came on 16th step. any hints on this , how to overcome this error ?
regards,
dinesh

For 11.1.2.1 start order check - Summary List of Services and Processes
Check the essbase logs for the reason behind the refresh problem.
Cheers
John

Problem to config :Hyperion EPM system configuratior 11.1.1.3

Hi All,
I installed all the components 11.1.1.3
In Foundation service->EPM system configurator->second screen
I gave oracle database information to config the shared service and registry database configuration and some tables are created in the database after that it is not going to next screen..
The screen shows it is in processing more that 1 hour.....I am not able to proceed...
Kindly advice me on this.
I can able to connected the database thorugh sqlplus which I gave above.
What may be the issue? or any one did config through Fountation service in 11.1.1.3 version.

Hello everyone,
I am encountering the same issue as depicted within initial post: when starting with the configuration of EPM product I am stuck at screen 'Shared services and registry database configuration': after the different fields are filled in (Database Type, Server, Port, Service Name or SID, Username, Password) I hit the button 'Next'.
Then the configuration is running for ages (more than a couple of hours) but is going nowhere.
For your information here is the context:
- OS: Windows Vista Enterprise Edition
- Database: Oracle Express 10g
Installation scope: Hyperion Planning
When browsing into the C:\Hyperion\logs\config folder I notice that some log files exist but were created the day before so no new files recently updated here.
When having a look into the EPM System Configurator CMD window I can see a few error messages like:
- java.io.FileNotFoundException: ..\..\..\logs\config\configtool_err.log (Access is denied)
- java.io.FileNotFoundException: ..\..\..\logs\config\cmc-config.log (Access is denied)
- java.io.FileNotFoundException: C:\Hyperion\logs\registry\registry.log (Access is denied)
This probably explains the reason why I am not able to see anything in the log file (if they can not be accessed) but I do not understand why the are not accessible since I have full access rights (did a left click and >properties>securities and made sure that the administror had all possible rights).
Any input warmly appreciated.
Thomas

EPM System 11.1.2.3

My name is Ted < personal information removed by moderator so that you don't get harvested by identity thieves ad infinitum >
Currently, we are in the process of upgrading our Hyperion System 9.3.3 environment to EPM System 11.1.2.3.
I am attempting to contact to users who are upgrading to System 11.1.2.3. My goal is to share our experience and exchange information with other users going thru the same upgrade. The products we use today are HFM, Planning/Essbase, FDM, Financial Reporting, SmartView, and WebAnalysis.
If you interested, please give me your name and email address and I will contact you.
Thank you,
Ted Hunkeler

Ted,
This web site is a Cummunity discussion forum for technical matters dealing with products and service from and by Oracle Corporation. It is a public forum.
Requests for and expectations for contact and communications outside the forums are specifically discouraged.
Review the site's FAQ and the Terms Of Use. Both of those are readily available as links on every forum page, both discuss the expectations for on-forum-only communication, and both are what you implicitly agreed to as conditions of registering to participate on the site.
Your post is locked to prevent others from spamming the forum with their contact information.

EPM system security externalize

Hi Masters,
Recently I have setup EPM system 11.1.2.4 for Essbase on my servers. As you all know this version doesn't support for standalone Essbase security and by default all the users/ groups would be maintained through shared services, I have a stupid doubt here,.... what is the purpose of having the option 'Externalize users' still in EAS? is it like we need to do 'externalize users' as soon as we installed and configured the Essbase and EAS?.
Please, help me in understanding this point.
Thanks,
Siva

Yes you are correct they are automatically externalized so there is not really point in having the option in EAS anymore, I am sure it will be removed in the future.
Cheers
John

EPM System Configrator........

Dear Friend,
i have install Hyperion system 11.1.1.3 successful.But when i start the EPM system configrator it will show the following error:
The system cannot find the path specified.
"JAVA_HOME is not set"
"Exiting"
After that i'll set JAVA_HOME in the Environment variable
JAVA_HOME
C:\Program Files\Java\jre1.5.0_17\bin
After setting the environment variable run the system configrator again but now nothing is display.
Plz share your Exp. with me..

Hi Vikram,
1. Do you still see " java " folder .
2. I remember , there was one issue with initial versions of 11, where java folder use to disappear
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

EPM system stop

Similar Messages

Maybe you are looking for