EPM with fusion controller

Hi i am new at EPM installation. I want to use fusion middleware to control my services and servers. Do i have to install fusion middleware first and than install EPM or fusion middleware is installed with EPM and i have to start its service or something like that. please ignore my lack of knowledge and guide me in the right path.
Regards

Once you install EPM you can either start EPM services using Services Panel in windows or using the batch files that are installed with EPM.
For Linux OS you will have to use shell script files to start EPM services(installed with EPM)
You can use console as well to start and stop the EPM Services
Thanks

Similar Messages

I am planning to buy an iMac 21.5 inch with Fusion drive and 16 GB RAM while i visit USA for a conference. My country of origin is India. Once i am back to India, will my iMac be covered by the Apple's Protection Plan?

I am planning to buy an iMac 21.5 inch with Fusion drive and 16 GB RAM while i visit USA for a conference. My country of origin is India and the option of configuring to my need is not avaialble here in India. My concern is once i am back to India, will my iMac be covered by the Apple's Protection Plan if something goes wrong here in India?
I recently came across some posts regarding International warranty related issues for iPhone and iPad....hence this crossed my mind...
Waiting for response from the support group members...

Thanks Ralph
This essentially means that if my iMac develops some problem (both software and hardware) in my country (India), it will be completeley attended (even the whole system requires replacement) by the AASP in India...is that what you say?

Windows Server 2008 R2: Server unable to authenticate with Domain Controller

Hello, I was wondering what could be the reason for this error if it is certain that there was no other computer on the network using the same name:
This computer could not authenticate with<Domain-controller>, a Windows domain controller for domain <Domain-name>, and therefore this computer might deny logon requests. This
inability to authenticate might be caused by another computer on the same network using the same name or the password for this computer account is not recognized.
What would cause the machine account pw to be 'not recognized'?

You can track changes in AD by enabling AD Auditing: https://technet.microsoft.com/en-us/library/cc731764%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
As reading the logs is usually a complicated and time consuming task, it is recommended to use a third party tool for auditing. The one I usually recommend is Lepide Auditor - Active Directory: http://www.lepide.com/lepideauditor/active-directory.html
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

How do I create a track with just controller MIDI data in it?

How can I create a track with just MIDI controller data in it?
For example: I'd like to create a track that issues a bank change/patch change and sets the default volume for that track, and that's it.
I can then use this setup as a template for future projects.
How can I do this?
It seems like LPX will not allow me to enter any controller data into a track without first defining a region. However, it seems that LPX also won't allow me to create a region with just controller data in it.
Ideas?
Thanks
-Mike

Soniq2 wrote:
How can I create a track with just MIDI controller data in it?
For example: I'd like to create a track that issues a bank change/patch change and sets the default volume for that track, and that's it.
I can then use this setup as a template for future projects.
How can I do this?
Let me qualify, I'm using Logic 9, not upgrading for various reasons.
Is this for an external Instrument? If so it's very easy to do using the inspector, but first you have to create an instrument in the environment. (at least in L9 and the way I do it, which is old school) Here's an example of an external instrument setup in the Environment.
A multi Instrument is created, channels 1, 2, 3, & 9 are active. Patch names are entered, format for bank change is selected. (just happens I selected channel 14 to open the patch names). This Instrument will now appear in the arrange page, and you can set patch change, bank change, volume & pan.

Can't back-up new iMac with fusion HD. The back-up proceeds to within 10% of the total storage needed and then the "of" number increases. I suspect there is a problem with backing up the fusion drive. We have a new 3 TB time Capsule. Any ideas?

Can't back-up new iMac with fusion HD. The back-up proceeds to within 10% of the total storage needed and then the "of" number increases. I suspect there is a problem with backing up the fusion drive. We have a new 3 TB time Capsule. I tried excluding different parts of the software from the back-up but it didn't make any difference. I even tried exluding "invisible items" to no avail. Any ideas?

When you setup the wireless and ethernet in the computer.. ipv6 will be on automatic.. this is wrong for the latest TC firmware and airport utility. http://support.apple.com/kb/TS4597
Go to the wireless and ethernet setup in preferences and change ipv6 to link local.
Once you do the big backup by ethernet the wireless will function fine for incremental.. it is obviously not estimating the size correctly..
A full back-up on the iMac would be about 650 GB. The partial updates that I have been trying start out at 115MB and keep growing indefinitely. The original back-up never finished nor have any of the follow-up attempts.
The first estimate should be the full backup but it will keep growing as the backup advances.. I would also delete any inprogress files to make sure it is not messing up .. delete even a sparsebundle if there is one for the imac on the TC and start afresh once you have ethernet connection.
See A10 here.
Pondini may have some other clues there to give you an idea of why the backup is slow or not finishing.. there is a lot of issues with TM when it decides not to work.

I purchased the Logitech F310 game controller for my 2011 MacBook Pro. How do I get the driver installed for it. The Disk that came with the controller is a mini disk and will not insert into my laptop.

I purchased the Logitech F310 game controller for my 2011 MacBook Pro. How do I get the driver installed for it. The Disk that came with the controller is a mini disk and will not insert into my laptop.

May not make a difference anyway. The Logitech support site does not show drivers for Mac OS for the F310:
http://www.logitech.com/en-us/support/gamepad-f310?crid=411
I'd contact their support to find out if there is a Mac driver available, and if they can either give you a web link to get it, e-mail you the software, or snail-mail you a standard-size disk with the drivers.

Office mac keeps asking for license key with fusion drive

I'm posting this in case anyone else is having this trouble where Office for Mac 2011 keeps asking for the license key. I have a later 2013 iMac with Fusion drive and never have been able to use office on this computer without entering the key. In talking with Microsoft they removed office and all the files and reinstalled with no help. In speaking with Apple, they said there is a known issue with Microsoft Office and the Fusion drive and Microsoft is working on a patch. Evidently the fusion drive moves the files around and to Microsoft that looks like new hardware so it prompts for the key. Realy annoying! Microsoft

I'm a certified Apple consultant and I recently hit this issue at an installation. On seven iMacs with the Fusion drive, I deleted the "Thunderbolt Bridge" interface from the Network System Preference. We then rebooted the computers, entered the product key one more time, and so far, the problem has disappeared and survives subsequent rebootings.
Obviously, if you are frequently networking two Macs using Thunderbolt, this isn't a good long-term solution (though it is easily added back). However, it does appear to work. I have no sound theory as to why it works, except that Office might be interpreting the existence of that bridge as evidence that the software was copied onto a machine instead of properly installed. This is just a wild guess, though.
I have no idea if it will work for others, but hey, the forums are for throwing out these ideas and seeing if one of them sticks for most people. So...there it is.

Colour profiles in Lion and windows 7 with fusion 3

Hello - I am a new iMac user and I also have windows 7x64 installed with fusion 3.
I am a keen photographer and use an external colour monitor calibrator - eye-one display 2 - not the latest version I know but it worked fine on my old PC running XP.    I have found out that Lion doesnt support this software as it needed rosetta(?) to run on a MAC but I have updated the windows driver for it to windows 7 and installed it on my windows 7 running with Fusion 3.
I have sucessfuly run the software on the windows on my mac and as always at the end it says the colour profile of my monitor has been changed to the new one.   My question therefore is:   Does this new profile only kick in when I am using windows or is the colour profile of the monitor the same in windows and Mac?   - if it is separate, is there a way I can either convert it to a MAC compatible version or transfer it to the MAC in any way as I work in Photoshop on the MAC and dont want to install it on Windows!
Thanks
Joy

well ive used both of the newest versions of vmware fusion and parallels and let me tell you, in my personal opinion i prefer parallels.
im using a 13" MBP 2.26 Ghz with 4 GB RAM, i chose to give parallels the "automatic" amount of RAM for windows 7 and it works like a charm, have no problems with it what so ever.
plus crystal viewing mode rocks!
give it a try with the demo version you might like it!

Integrating BPM Composer and SOA Composer with Fusion

Hi
I am working on integration of BPM Composer or SOA Composer with Fusion. Any kind of help like documents etc would be very much appreciated.
Thanks

I don't believe that noone has ever tried to connect the local BPM environment to a remote WCC server before. Please let me know if you've ever experienced the same problem. Otherwise, even a simple "I tried to do the samething and I succeeded using the same steps in the tutorial" would help too .
Another thing is that yesterday, I talked to the tech-lead and I learned that our WCC server environment doesn't have BPM installed yet. I am wondering if this would cause the WCC server to not understand the request from my BPM server. In addtion, I've also upgraded my local BPM server using the lastest SOA bundled patch. Should the same patch be applied to the WCC server environment too?
I'd be very grateful for any advice .

Purchase requisition with MRP controller

Hi everybody, I need support because I have to control during purchase requisition to block users with specific MRP controller.
I mean, user A only have permission to create purchase requisition with MRP controller Z and user B only have permission to create purchase requisition with MRP controller Y.
Thanks for all the ASAP cooperation.
Regards.

Hi Mitra,
You will find your answer here.
MRP controller for PR document type
Do let me know if it helped, as I might have to explore this option for an upcoming requirement.
Thanks
Shailesh

Script for synchronizing the clock with Domain Controller

Hi Everyone,
In our environment, we have Mac machines which are joined to window's domain. Once in while machine will not log on to domain because the OS clock had a different time than the domain controller and sooner you fix the clock, machine will start communicating with domain controller.
I was wondering if there is an easier way to do this using script which can run every few hours to force the OS clock to synchronize with the domain controller.
Thanks,

You don't need an Applescript to do that.
Enable the NTP server on the Windows Domain Controller (perhaps start here: http://technet.microsoft.com/en-us/library/cc773013.aspx).
Then setup the Macs to use NTP (Network Time) to sync to the domain controller.

Using older servos with new controller

My group has a three-axis stage controlled by an old Galil DMC-230
motion control board, Galil ESA-10-75 amplifilers and three dc servo
motors (from Galil too, I think). The board is mounted in an
ancient computer running DOS. To make matters worse, the hard
drive seems about to give out. We would like to leave the stage
and motors alone but replace the controller and amplifiers. We
are considering using an NI PCI-7344 controller with an NI MID-7604
Motor Drive.
My questions are:
What are the main things to consider when matching a servo motor to a controller?
Has anyone done anything similar (using older servos, but replacing controller and drive)?
Should I just give up and beg the boss to buy new motors as well?
Thanks for any advice!
Telemaque

Been there and almost done that. We have a legacy DOS Galil based (DMC-630 controllers with SSA-12/40 drives) system with brushed servos that is on it's last legs.
Matching servo to drive amps- look at max currents, voltages, and inductances on the motors to see if drive can accomodate. Are they brushed or brushless motors. Also check if encoders and hall signals from existing motors and limits from stages compatible with new controller.
Personally, I would suggest new motors since you may not know their history of (ab)use and depending on their ratings, may be a minor percentage of total retrofit cost. You may also want to have the stages sent out for refurbishment if time permits. They have probably seen a lot of use with little or no cleaning and lubrication. Mechanical wear also takes it's toll. On the system I mentioned above, we were experiencing loss of accuracy and repeatability- the lead screws and nuts were trashed.
Just a couple ideas to start with.
Good Luck
AK2DM
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

Key board hangs up randomly with 8155B controller while running the application.

Key board hangs up randomly with 8155B controller while running the application.

Roopal,
This question has too much parameters. In order to help you out, I need to know more information. For example:
1) Is this a new issue? Has your keyboard worked fine before?
2) Is you keyboard hanging up when you run a specific application? Does it hang up at boot up?
3) What operating system are you running?
Regards,
Claudia Lorente
Applications Engineer
National Instruments
http://www.ni.com/ask

Reusable Component: Fragment with onw controller

Hi,
I have written a JS-fragment, which shows a table of files. You can upload/download files from this view.
All functions are coded within this one Files.fragment.js file.
I wonder what the best way would be, to have ONE single, own controller for this fragment.
I dont want to add all function within the "parent" controller.
The fragment is used on several views within the app.
Is there any best practise to build more complex, reusable component in UI5?
Jens

Hi Jens,
To my knowledge, Fragments can't have a dedicated controller assigned -- it uses the controller of the calling view:
Fragments are pieces of UI, just like SAPUI5 MVC views, but without the view control around the content and without their own controller.
SAPUI5 SDK - Demo Kit
However, according to the API, you could indeed specify a specific controller so I'm not sure if it would be possible to use a dedicated controller for a Fragment... I have never tried this with Fragments.
Before Fragments, if I had a complex view, I would have one 'container' or 'parent' view with its controller, and the different inner parts of this container/parent view consisted of other views (which uses the container controller). And only the inner views that were reusable would have their own controller.
In other words, if it is possible to have a dedicated controller for your reusable Fragment, then that's indeed the way to go IMO

Finder is really slow ( 15 sec.) after mavericks update on brand new iMac 27" WITH fusion drive...

When looking up files it's fine, but when trying to save or open anything through ANY program, i.e. Adobe CS6 programs, Microsoft Word, but also Apple software, finder is really slow (15 sec. or more of the same spinning beach ball) after the OSX Mavericks update on my brand new iMac 27" WITH fusion drive... This ***** really bad because it totally disturbs the smooth workflow I bought the iMac for in the first place...
Any suggestions?
Already tried 'clearing the plist file' through terminal; didn't work... Rebooting (obviously), didn't work.
Will there be a fix soon?
It's costing me way to much time waiting for the finder to show it's content when working.
Any official word from Apple on this?

I had a similar problem. Tried repairing disk permissions, tried cleaning up with onyx and applejack with no luck. Finally what did work was simply starting up in safe mode (hold shift key down after restart) and it sorted itself out
Hope this works for you

EPM with fusion controller

Similar Messages

Maybe you are looking for