EPMA App Wizard

The EPMA App wizard does not show the dimensions in the Dimension Library after clicking next when creating an Essbase and/or a Planning application.
So I can't click next from the second tab, I get this error.
"Select or create a dimension for all of the required dimension types.,Select at least one dimension to continue."
...I created a Planning app a few weeks ago and it was fine. What could this be?
Thanks,
Jz

Are you able to view Dimension Library from the Workspace i.e. from Navigate --> Administer --> Dimension Library??
Can you check if you have provisioned user appropriately in Shared Services.
Thanks,
HyperionEPM

Similar Messages

  • Unable to log in to Hyperion Planning App Wizard

    Dear All,
    Unable to log in to Hyperion Planning App Wizard. This is my new installation. There is no error message in the planing windows. After click on log on button, the page just getting refresh and its come to same page only.
    errors in in the planning logs......
    <Nov 27, 2011 1:33:33 AM GST> <Warning> <JMX> <BEA-149515> <An error was encountered getting the attribute AdminServerListenPort on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
    <Nov 27, 2011 1:33:33 AM GST> <Warning> <JMX> <BEA-149515> <An error was encountered getting the attribute AdminServerHost on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
    <Nov 27, 2011 4:36:12 AM GST> <Warning> <JMX> <BEA-149515> <An error was encountered getting the attribute AdminServerListenPort on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
    <Nov 27, 2011 4:36:16 AM GST> <Warning> <JMX> <BEA-149515> <An error was encountered getting the attribute AdminServerHost on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
    <Nov 27, 2011 7:33:45 AM GST> <Warning> <JMX> <BEA-149515> <An error was encountered getting the attribute AdminServerListenPort on the MBean com.bea:Name=Planning0,Type=ServerRuntime during a call to getAttributes>
    Please help me on this issue...
    Thanks
    GTS.

    Those are just warnings and shouldn't be an issue.
    What browser are you using, have you tried to go directly and through workspace to the application creation wizard.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • SDK 9.1 Visual Studio App Wizard and VS2008

    I have both VS2005 and VS2008 on my system. When I run setup.exe in 'Acrobat 9 SDK\Version 1\PluginSupport\Tools\Visual Studio App Wizard'  the Version 9 template only shows up in VS2005. Is there a way of getting the template into VS2008? Are SDK 9.1 and VS2008 compatable?

    SDK 9 is only supported with VS2005.  Most things will still work in 2008, but the plug-in wizard was designed specifically for VS2005 and does not work with VS2008.

  • Visual Studio App Wizard won't install with Visual Studio 2005

    When I try run the Visual Studio App Wizard from the Acrobat SDK V8.1 on my PC it tells me 'Please install Visual Studio 2005 before install Acrobat 8 Plugin Wizard'. I have Visual Studio 2005 installed with SP1. I also have the .NET framework 2.0.50727 SP1 loaded. I see this same problem on two different PC's with the same software configuration loaded. Any known issues with that?

    I've never seen this happen. It's been a while since I last installed the
    v9 SDK and it's plug-in wizard, so I don't remember how the installation
    went.
    I do most of my plug-in work on the Mac, where there is no plug-in wizard,
    so I don't use it - not even on Windows. You do not need it to start a new
    plug-in: Just use either the Starter plug-in from the samples, or the
    BasicPlugin project. This will give you something that compiles and runs.
    Then do a few simple text replacements to give things the proper names and
    use that as your starting point. The wizard will give you a few more things
    in regards to HFTs, but it's not complicated or time consuming to do that
    by hand. The good thing about having to do this every now and then is that
    it keeps your memory fresh about how HFTs work.
    If you want to save yourself some time, create your own starter plug-in
    that you mark up with comments about what you need to replace and why - put
    all the stuff in that you usually need and then just use that every time
    you need to start a new plug-in. Setting up a plug-in framework is usually
    a very small portion of the time that you will eventually spent on the
    plug-in development, so using the wizard will not save you much in the
    overall development time.
    Karl Heinz Kremer
    PDF Acrobatics Without a Net
    [email protected]
    http://www.khkonsulting.com
    On Sat, Nov 3, 2012 at 12:55 PM, Ramon F Herrera

  • Planning project not showing in shared services and planning app wizard

    I installed planning ver 9.3.1 and now when want to create a planning application, the 'planning' option is not showing in app wizard. It is also not showing in shared services project list. Can you please guide...
    Thanks & Regards.

    Thanks for the reply. I can login to planning AppWizard but when want to create a planning application, in the drop down of shared services project, the 'planning' option is not coming.
    As I have installed planning afresh, so right now no planning application I have in my computer. so, no meaning to login to http://localhost:8300/HyperionPlanning/ because it is showing 'no application'.
    Please revert back for any clarifications.
    Thanks & Regards.

  • Missing Search Field when using 3.1 Create App Wizard ?

    Hi
    2 points which look like bugs to me;
    1 - In all previous versions whenever I used the create app wizard to build up a list of pages, reports always included the 'search across any varchar field' funtionality. This seems to have disappeared when using the Classic form of reports. It is obviously there if you use an Interactive report.
    2 - Again when using the Create App wizard, if I use the Classic form (in order to be able to also 'Generate Analysis Pages') these do get built, but not linked in any way (tab, list region, button etc) to any other pages. I can link them myself, but I am demonstrating APEX here and it doesn't look so good....
    Can someone just quickly confirm I am not going mad here ?
    Jules

    Hi Jules,
    You're not going mad! I've reviewed the behaviour of the Search field and the Analysis Pages link using releases 3.0.1 and 3.1.1, and there is a difference in behaviour between the two versions.
    Classic Reports generated via the Create Application Wizard in 3.1.1 should have a Search text field above the report region, however this field is missing. I've logged bug 7185486 for this issue. Classic Report&Forms generated via the Create Application Wizard, with the "Include Analysis Pages" option selected, are missing a link to the Analysis pages in 3.1.1. I've logged bug 7185486 for this issue. I've updated both bugs with a workaround. A fix for these issues will be available in a future release. Thanks for bringing these two issues to our attention.
    Regards,
    Hilary

  • V11: EPMA App deploying error

    Hi,
    I'm using EPM11.1.1.3.
    EPMA application has been migrated from V9.3.1 as classic app and then it has been migrated to EPMA app.
    When I try to deploy it (w/out any changes) I get error
    "Dimension 'FYear' failed validation 'YearMembersSequential' for the following reason(s): Year members must be sequential."
    What does it mean?

    Verify in the Application Library if your dimensions. The EPMA sometimes create new members how "No Year", for example.
    You can excluded in the Application View.
    M

  • Ovi app wizard apps on n97 mini

    i cant get any of the new ovi app wizard apps to load on my n97 mini? the app opens but the feed doesnt load, does anyone have any idea how i can sort this? thanx in advance.

    i have this experienced too.
    At last i found out that it is because you have update your ovi suite and the setting within will change.
    Be sure you have check you map store location are on the correct place as if you have memory card installed.
    First :- On your ovi suite, go to TOOLS -> OPTIONS -> MAPS.
    On your right hand side you will see "SELECT THE DEVICE MEMORY USED FOR SAVING MAPS DATA".
    Below it have a drop box. Make sure the drop box is not empty (it will be if you did not connect your phone.)
    If you have connect your phone then the memory location should be MASS MEMORY (E
    once this set, click ok then back to maps.
    if it does not refresh. unplug your phone and plug it in again.
    If this still not help then go to your phone delete CITIES folder and QF files. ( you will need to re-donwload the MAPS and voice guidance).
    After delete it, you will need to acess the MAPS program on your phone to regenerate that folders and file you have delete.
    also remember to check the setting on your phone is same as your computer, MAPS storage location are same MASS MEMORY (E.
    GOOD LUCK,

  • Unable to access EPMA (App Library and Dim Library) from Workspace

    Hi All. We're running Planning 11.1.1.3 with Weblogic on Linux and EPMA on Windows. When I login to Workspace with my MS Active Directory admin account, and I try to connect to EPMA (Navigate | Administer | Application Library or Dimension Library), I get an error popup message that says:
    "An error was encountered by the CAS Security Provider: 25:1005:Authentication failed for user xxxxx. Enter valid credentials. Error Code: SVR_ERR_SESSION_MGR_CAS_SECURITY_ERROR"
    However when I am logged into Workspace with a NATIVE user ID admin account, I can get into EPMA's App Library or Dimension Library without any problems.
    Thanks for any suggestions.

    Hi All,
    I am also getting the same issue, Any resolution please.....
    25:1005:Authentication failed for user xxxxxx. Enter valid credentials.
    Error Code: com.hyperion.css.CSSAuthenticationException
    Trace: com.hyperion.awb.web.common.BaseAction.checkWebSession(BaseAction.java:99)
    com.hyperion.bpm.web.common.BaseAction.execute(BaseAction.java:65)
    org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:421)
    org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:226)
    org.apache.struts.action.ActionServlet.process(ActionServlet.java:1158)
    Exception com.hyperion.css.CSSAuthenticationException rethrown
    com.hyperion.css.CSSAPIImpl.throwAuthException(Unknown Source)
    com.hyperion.css.CSSAPIImpl.authenticateToken(Unknown Source)
    com.hyperion.awb.web.css.CSSAuthenticate.authenticateUser(CSSAuthenticate.java:97)
    com.hyperion.awb.web.common.BaseAction.checkWebSession(BaseAction.java:64)
    com.hyperion.bpm.web.common.BaseAction.execute(BaseAction.java:65)
    Thanks in Advance,

  • Import Essbase Dimensions into epma app

    Hi All,
    We are working in EPMA Planning Application.We have created the Planning app and deployed it successfully.we struck with importing dimensions...that is..
    1) Is it possible to dump the essbase dimensions into epma application?
    or
    Is it possible to covert the essbase app into epma application?
    Please let us know .
    thanks in advance.

    You can transform an essbase application into an EPMA one - http://docs.oracle.com/cd/E17236_01/epm.1112/epma_admin/epma_app_upgrade.html
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Classic apps vs. EPMA app

    Hi guys,
    Just a little question... :)
    When you extract the artifacts from an EPMA application using the HFM client... Are they "clean"? Can I use them to create a classic application in another environment?
    I believe I cannot do it with CalcManager rules, but what about the other objects (metadata, member list, security)?
    Thank you, guys!
    Regards,
    Anna

    Hi,
    The objects are clean and can be loaded into a Classic App.
    Regards,
    Masood

  • Unable to log into Planning App Wizard

    Hi Friends,
    Error message on screen when trying to log in:
    User must have the Planning Application Creator and Dmension Editor roles to manage applications
    Tried to assign apllication creator and dimension editor roles in shared services.But those roles are not available in shared services.
    Sharedservices_security.log has the below error:
    com.hyperion.css.spi.impl.nv.NativeProvider.getHierarchicalRoleTree(NativeProvider.java:2164) - Exception getting Child Roles in hierarchy due to Illegal or invalid id.dflt passed in.
    Sharedservices_syncOpenLdap.log shows the error:
    2008-10-20 16:24:26,837 INFO - Finished syncing Apps and Projects.
    2008-10-20 16:24:26,880 INFO - Finished syncing Groups.
    2008-10-20 16:24:26,880 INFO - Finished performing sync operation.
    2008-10-20 16:39:04,598 INFO - Intializing Sync Operation for OpenLDAP.
    2008-10-20 16:39:04,599 INFO - Sync operation not activated.
    Any suggestions on what could be the reason will be of very helpful.
    Regards.

    Hi,
    These roles are under the Shared Services section in the user management console, not Planning.
    If they re not there then I would say you havent configured BPMA or planning correctly.
    Let us know.
    Seb
    www.taysols.com.au

  • Classic App wizard page errors out from workspace

    I am trying to launch the classsic application wizard page(under Navigate->Administer) from Worspace and it keeps erroring out. I dont get any detailed message , but it says" An error occurred while processing the page.Check the log for details". And the workspace tab also gets hung up with this message.
    Any ideas?

    I too am getting the same error. When i click the validate 'Validate essbase connection' on the application wizard page, I get a blank page saying 'An errror occured'. I stop the planning service and restarted it from Start button. This time I got the error message
    [ERROR] [HspCreateDatasource] - Servlet.service() for servlet HspCreateDatasourc
    e threw exception <java.lang.UnsatisfiedLinkError: no HspEssbaseEnv in java.libr
    ary.path>java.lang.UnsatisfiedLinkError: no HspEssbaseEnv in java.library.path
    at java.lang.ClassLoader.loadLibrary(Unknown Source)
    at java.lang.Runtime.loadLibrary0(Unknown Source)
    at java.lang.System.loadLibrary(Unknown Source)
    at com.hyperion.planning.olap.HspEssbaseEnv.<clinit>(Unknown Source)
    at com.hyperion.planning.olap.HspEssbaseJniOlap.<clinit>(Unknown Source)
    at com.hyperion.planning.HspJSHomeImpl.TestEssConnection(Unknown Source)
    at HspCreateDatasource.doCheckEssbaseConnection(Unknown Source)
    at HspCreateDatasource.doHandle(Unknown Source)
    at HspCreateDatasource.doPost(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
    icationFilterChain.java:252)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF

  • Upgraded FlexBuilder to 2.01 .. Now CF App wizard won't compile projects.

    Hi,
    I just installed the upgrade for flexbuilder 2.01. Was
    working on a cf application wizard project and got to the end and
    found out the compiler won't work. Googled for an answer and found
    info that says a change was made late in the release that is
    causing this. Seems you now need to add an addtional argument
    -context-root "" in the complier string.
    Context root for server-based projects - The New Project
    Wizard now allows you to specify a context root when creating a
    Flex Data Services (FDS) or ColdFusion project. The context root is
    a name assigned when deploying a J2EE web application (FDS and
    ColdFusion are considered “web applications” from the
    J2EE perspective). It distinguishes one web application from
    another web application on the server and forms part of its root
    URL. The Flex services configuration needs to know this value in
    order to construct the correct URLs to the FDS or ColdFusion root.
    If it is incorrect, Flex services may throw errors at runtime
    relating to unreachable server URLs.
    Note: ColdFusion servers that use the standard configuration
    (that is, they don't use the multiserver or J2EE configurations)
    can leave this setting at its default value. However, if you
    created projects with the 2.0.0 version of the ColdFusion
    Extensions for Flex Builder, you must add -context-root "" to the
    additional compiler arguments in order to compile with Flex Builder
    2.0.1. For more information, see the Flex Team Blog.
    However this does not work for me.
    It does not compile. I've tried a number of things but none
    seem to work. Is there anyone here who can shed some light or has a
    work around that does work?
    Thanks

    I've tried Build solution, Rebuild solution, Clean solution and then build solution and also all of the above for just the project. Not to mention, delete the folder and checkout from the source control once more. In the other words, any combination I could
    think of.
    It's Visual Studio Professional 2013 12.0.31101.00 Update 4

  • Can you use the ovi app wizard

    hi guys,i had an attempt at making an app then at the end it turns out you need to be part of a company or something lol.have any of you guys made an app or if possible can anyone make a ps3 app which will deliver all the up to date news on playstation gameing,straight to my n900. thanks guys 

    You can use the iOS version of Pages on the current iPod touch. You can't use the Mac version of it on an iOS device.
    (59648)

Maybe you are looking for