EPMA(Hyperion 11.1.1.3) installation Errors - on Windows 2003 64 Bit Server
Hi,
We trying to install Hyperion 11.1.1.3 components with Hyperion Strategic Finance and EPMA on 64 Bit Windows 2003 R2 Server. We are installing all components on a single server. In the installation process while checking the components, we are getting this below error message.
"component strategic finance web services cannot be installed
hfm and epma 64-bit componentscannot co-exist with 32-bit component for hsf/fdm
component performence architect dimension server services cannot be installed
hfm and epma 64-bit components cannot co-exist with 32-bit component for hsf/fdm"
Please share your valuable suggestions to go ahead with this installation,
Thanks in advance for your earliest replies
***Chinna***
Edited by: Hyperion Chinna on Jul 22, 2010 5:10 AM
Srikanth,
The New Atlanta ServletExec portion of the xMII 11.5 installation is not fully compatible with 64 bit windows. Here is a good reference for you: http://www.newatlanta.com/c/support/servletexec/self_help/faq/detail?faqId=296
Regards,
Jeremy
Similar Messages
-
Photosmart C4795 installation error on Windows 7 64 bits
Dear experts,
I have been facing an annoying issue while installing HP Photosmart C4700 All-in-One Printer series Full Feature Software and Driver I recently donwloaded from HP website.
During the installation process, the window suddenly closes when "applying updates". No error message is shown or anything that could tell us what went wrong, it just disappears from my screen.
I've found the following post with the exact issue as mine but different product. I tried that solution but it did not work at all for me: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/hp-photosmart-plus-b209a-m-driver-inst...
I hope someone can give me a tip because I am really out of options here.
I appreciate any help.
Thanks,
Ricardo
This question was solved.
View Solution.Hello Ricardo,
lease try following these steps and let me know the results:
Launch the installation and follow the steps till the EULA (License Agreement) screen.
Click the 2nd link - Internet Connection Usage Settings and select No, Thanks for both of the listed questions.
Confirm the selection, accept the EULA and continue the installation which should no\w proceed further.
Plese let me know if that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Oracle 10g XE installation error on Windows 2003 Server
Hi,
I am getting the following error while trying to install Oracle 10gXE
on Windows 2003 server.
My System is Compaq AMD Athlon 64 Bit with 512MB RAM
Unhandled Exception
Error Number: 0x80040707
Description : DLL function call crashed: GetHostnameDLL.GetHostname
Setup will now terminate.
Thank you
Sudheer PalaparambilIf this is not related to a corrupt download, then it should be reported to the XE forum.
Please register for the XE forum at http://www.oracle.com/technology/xe/registration ....
Then, next time you sign in to the discussion forum (with the userid you registered) you will see the XE forum link at the bottom of the discussion forum page. -
10g R2 Client Installation Problem on Windows 2003 64 bit itanium
Hi,
When I click on the setup.exe, i am getting the following..and not getting setup screen
Using paramFile: E:\oracle_client\10g_winIA_client_102010\client\install\oraparam.ini
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
The commandline for unzip:
E:\oracle_client\10g_winIA_client_102010\client\install\unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.8.0/1/DataFiles/"*.jar" -d "C:\DOCUME~1\SBOLLI~1\LOCALS~1\Temp\1\OraInstall2008-04-22_03-44-38PM"
The commandline for unzip:
E:\oracle_client\10g_winIA_client_102010\client\install\unzip -qqq ..\stage\Components\oracle.swd.oui\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\DOCUME~1\SBOLLI~1\LOCALS~1\Temp\1\OraInstall2008-04-22_03-44-38PM"
The commandline for unzip:
E:\oracle_client\10g_winIA_client_102010\client\install\unzip -qqq ..\stage\Components\oracle.swd.oui.core\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\DOCUME~1\SBOLLI~1\LOCALS~1\Temp\1\OraInstall2008-04-22_03-44-38PM"
The number of files bootstrapped for the jre is 528.
The number of files bootstrapped for the oui is 98.
what might be the problem, is this due to not having unzip software in the server.
Please help meJust check this link:
Oracle Installer crashes in Windows XP attempting to install 10g database
May be useful...
Amardeep Sidhu
http://www.amardeepsidhu.com -
OBIEE 11.1.1.5 installation Error on windows 7 64 bit
Hi, I am unable to install OBIEE 11.1.1.5 in my windows 7 home premimum 64 bit laptop.
I got the following error while installation(simple installation) at 'CONFIGURE COMPONENTS' stage, can somebody help me please...
INST-08010: Error in validing the port range for auto port allocation. At Least 2 ports should be free within the range 7500-7500 for the Adminserver and Adminserver SSL
Ensure that a minimum of 2 pors are free within the range 7000-7500 for auto port allocation to work correctly for the Adminserver and
INST - 08010: Error in validating the port range for auto port allocation. At least 3 ports should be free within the range 9500-9699 for the Weblogic Components for BI(WLS Managed Server, Managed Server SSL and NodeManager)
Ensure that a minimum of 3 ports are free within the range 9500-9699 for auto port allocation to work correctly for the Weblogic Components for BI(WLS Managed Server, Managed Server SSL and NodemanagerHi,
It's Port no issues. if u r going with autoportconfiguration it will refer 7001 to 7005 port. that port no are unavailable u r laptop.
solution 1:
go with manual prt configuration method and use available port(enterprise/software only install ).
solution 2: disable Mecafi antivirus --> this may use 7001 to 7005 port no. then try it again.
Note: obiee11g ok with win 7 ultimat/professional edition. it's having lot of issues with win 7 basic/home perimum edition so make sure u r version. i.e: first of all officially oracle not supporting win 7 os
FYI: certification matrix
http://obieeelegant.blogspot.com/2011/10/windows-7-home-premium-edition-is-not.html
Thanks
Deva -
OBIEE 10G installation Error On Windows 7 64 Bit
Hi,
I am trying to install the 10G application on my laptop . I am getting the following error
Mar 29, 2013 11:40:45 AM), Install.product.install, com.installshield.wizard.platform.win32.Win32RegistryException, err, Error while processing registry file C:\Users\rajnic\Desktop\Desktop\Setup\Obiee setup\Windows\Server\Oracle_Business_Intelligence\setup.jar+/292f1fa18819acc1e94660891091aed4/win32reg/RegWebDsnActionBean/RegWebDSN.reg
(Mar 29, 2013 11:40:45 AM), Install.product.install, com.siebel.analytics.install.WindowsRegistryUpdateCustom, err, ProductException: (error code = 601; message="The system cannot find the file specified.
(2) Error on line 3")
STACK_TRACE: 13
ProductException: (error code = 601; message="The system cannot find the file specified.
(2) Error on line 3")
at com.installshield.wizard.platform.win32.Win32RegistryUpdate.install(Win32RegistryUpdate.java:101)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(PureJavaProductServiceImpl.java:1916)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(PureJavaProductServiceImpl.java:5195)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(InstallableObjectVisitor.java:369)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(InstallableObjectVisitor.java:333)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(InstallableObjectVisitor.java:133)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(PureJavaProductServiceImpl.java:4563)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(PureJavaProductServiceImpl.java:3758)
at com.installshield.wizard.service.AsynchronousOperation.run(AsynchronousOperation.java:41)
at java.lang.Thread.run(Unknown Source)
Please suggest How should I resolve this issue ?
Thanks,
VarunEven I am getting this error:
[2013-07-30T15:23:58.174+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000K0izb050BxmpKox0ie1HxsP500000F,0] reportStartConfigAction: 2........
[2013-07-30T15:23:58.174+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000K0izb050BxmpKox0ie1HxsP500000F,0] reportStartConfigAction: Set the Extion Id to START........
[2013-07-30T15:23:58.174+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000K0izb050BxmpKox0ie1HxsP500000F,0] reportStartConfigAction: Did the assignment...
[2013-07-30T15:23:58.174+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000K0izb050BxmpKox0ie1HxsP500000F,0] reportStartConfigAction: EXIT........
[2013-07-30T16:24:23.946+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000K0izb050BxmpKox0ie1HxsP500000F,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
any solution for the same? -
Adobe after effect cs 6 installation error on windows 7 64 bit..
I download the adobe Master Collection for my college class (which provided my keys) The only issue I have is when it came to installing Adobe After Effects CS6, i would get this error list ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 7 warning(s)
WARNING: DS013: Payload {3BF96AC2-0CA1-11DF-B07B-459956D89593} AdobeHelp 1.0.0.0 is already installed and the session payload {D38116C8-C472-4BB0-AD6F-0C1DD1320D1D} AdobeHelp 4.0.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {A8798E04-96FF-4564-9157-0D4C89CB794C} DynamiclinkSupport 5.0.0.0 is already installed and the session payload {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Checking payloads upgrade/conflict relationships : Failed with code 1
WARNING: DW016: NOTE: Cannot set action to the payload {B8ADDCBD-30D9-4366-AE25-089CEF76C8E1} Suite Shared Configuration CS6 3.0.0.0 as it is already upgraded by the payload {8706963D-5F48-47CC-998B-DAB70B089DB8} Suite Shared Configuration CS6 3.0.0.0
WARNING: DW016: NOTE: Cannot set action to the payload {B8ADDCBD-30D9-4366-AE25-089CEF76C8E1} Suite Shared Configuration CS6 3.0.0.0 as it is already upgraded by the payload {8706963D-5F48-47CC-998B-DAB70B089DB8} Suite Shared Configuration CS6 3.0.0.0
WARNING: DW016: NOTE: Cannot set action to the payload {B8ADDCBD-30D9-4366-AE25-089CEF76C8E1} Suite Shared Configuration CS6 3.0.0.0 as it is already upgraded by the payload {8706963D-5F48-47CC-998B-DAB70B089DB8} Suite Shared Configuration CS6 3.0.0.0
WARNING: DW016: NOTE: Cannot set action to the payload {B8ADDCBD-30D9-4366-AE25-089CEF76C8E1} Suite Shared Configuration CS6 3.0.0.0 as it is already upgraded by the payload {8706963D-5F48-47CC-998B-DAB70B089DB8} Suite Shared Configuration CS6 3.0.0.0
----------- Payload: {9E0AF030-AC6B-11E0-8837-00215AEA26C9} Microsoft Visual C++ 2010 Redistributable Package (x86) 10.0.40219.1 -----------
ERROR: Failed to install Microsoft Visual C++ 2010 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\Voldo\Desktop\Adobe After Effects CS6 (64 Bit) - Cool Release\AfterEffects_11_LS7\Adobe After Effects CS6\payloads\Microsoft VC 2010 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x86) from Microsoft website - www.microsoft.com
----------- Payload: {9C4AA28F-AC6B-11E0-8997-00215AEA26C9} Microsoft Visual C++ 2008 Redistributable Package (x86) 9.0.30729.4148 -----------
ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\Voldo\Desktop\Adobe After Effects CS6 (64 Bit) - Cool Release\AfterEffects_11_LS7\Adobe After Effects CS6\payloads\Microsoft VC 2008 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x86) from Microsoft website - www.microsoft.com
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Microsoft Visual C++ 2008 Redistributable Package (x86): Install failed
ERROR: DW050: - Microsoft Visual C++ 2010 Redistributable Package (x86): Install failed
Im really trying to get this up and running because my class has started using After Effects and im falling behind. Any idea on how to fix this?
Should be noted that all the other adobe software installed without any problems.It says what it means: Download the MSVC runtimes from Microsoft and install them manually.
Mylenium -
R12 login page error on windows 2003 (500 Internal Server Error)
I am getting the following error while opening R12 home page.
oracle.apps.fnd.cache.CacheException
at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:228)
at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1485)
at oracle.apps.fnd.profiles.Profiles.getProfile(Profiles.java:354)
at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfileFromDB(ExtendedProfileStore.java:211)
at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfile(ExtendedProfileStore.java:171)
at oracle.apps.fnd.profiles.ExtendedProfileStore.getProfile(ExtendedProfileStore.java:148)
at oracle.apps.fnd.common.logging.DebugEventManager.configureUsingDatabaseValues(DebugEventManager.java:1259)
at oracle.apps.fnd.common.logging.DebugEventManager.configureLogging(DebugEventManager.java:1114)
at oracle.apps.fnd.common.logging.DebugEventManager.internalReinit(DebugEventManager.java:1083)
at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:1050)
at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:1037)
at oracle.apps.fnd.common.AppsLog.reInitialize(AppsLog.java:595)
at oracle.apps.fnd.common.AppsContext.initLog(AppsContext.java:941)
at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:926)
at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:891)
at oracle.apps.fnd.common.WebAppsContext.<init>(WebAppsContext.java:1027)
at oracle.apps.fnd.common.WebRequestUtil.validateContext(WebRequestUtil.java:223)
at OAErrorPage.jspService(_OAErrorPage.java:200)
[OAErrorPage.jsp]
at com.orionserver[Oracle Containers for J2EE 10g (10.1.3.0.0) ].http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:416)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:478)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:401)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:270)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:42)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:204)
at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.EvermindPageContext.handlePageThrowable(EvermindPageContext.java:761)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.EvermindPageContext.handlePageException(EvermindPageContext.java:727)
at OA.jspService(_OA.java:254)
[OA.jsp]
at com.orionserver[Oracle Containers for J2EE 10g (10.1.3.0.0) ].http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:416)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:478)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:401)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
at java.lang.Thread.run(Thread.java:595)
Caused by: oracle.apps.jtf.base.resources.FrameworkException: Error in IAS Cache: java.lang.NullPointerException: null Connection
at oracle.apps.jtf.cache.IASCacheProvider.get(IASCacheProvider.java:712)
at oracle.apps.jtf.cache.CacheManager.getInternal(CacheManager.java:4802)
at oracle.apps.jtf.cache.CacheManager.get(CacheManager.java:4624)
at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:216)
... 53 more
Caused by: oracle.apps.jtf.base.resources.FrameworkException:
An exception occurred in the method CacheAccess.get
null
The base exception is:
null Connection
at oracle.apps.jtf.base.resources.FrameworkException.convertException(FrameworkException.java:607)
at oracle.apps.jtf.base.resources.FrameworkException.addException(FrameworkException.java:585)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:66)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:88)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:202)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:218)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:249)
... 57 more
I am trying to implement solution as per doc id: 414170.1. However when i try to run autoconfig at database level, it was throwing error that it is unable to connect to database.
Then I checked listener status using "lsnrctl status". I do see instance listener in BLOCKED status.
When I check metalink for the BLOCKED status reason, they asked to restart the database in OPEN mode.
I am trying to login to database but it says "ORA-12560 TNS:protocol adapter error". When I try to STOP and START (using lsnrctl start command), it shows as "The listener supports no services".
==========================
I am copying the content of instance.log (vis.log) file...
TNSLSNR for 32-bit Windows: Version 10.2.0.3.0 - Production on 16-FEB-2009 17:15:39
Copyright (c) 1991, 2006, Oracle. All rights reserved.
System parameter file is D:\oracle\VIS\db\tech_st\10.2.0\network\admin\VIS_navya\listener.ora
Log messages written to D:\oracle\VIS\db\tech_st\10.2.0/network/admin\vis.log
Trace information written to D:\oracle\VIS\db\tech_st\10.2.0/network/admin\vis.trc
Trace level is currently 0
Started with pid=2220
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCVISipc)))
Error listening on: (ADDRESS=(PROTOCOL=TCP)(Host=navya.company.com)(Port=1521))
TNS-12542: TNS:address already in use
TNS-12560: TNS:protocol adapter error
TNS-00512: Address already in use
32-bit Windows Error: 48: Unknown error
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCVISipc)))
==========================
=============================
Here is content of listener.log file...
TNSLSNR for 32-bit Windows: Version 10.1.0.5.0 - Production on 16-FEB-2009 17:35:13
Copyright (c) 1991, 2004, Oracle. All rights reserved.
System parameter file is D:\oracle\VIS\inst\apps\VIS_navya\ora\10.1.2\network\admin\listener.ora
Log messages written to D:\oracle\VIS\apps\tech_st\10.1.2\network\log\listener.log
Trace information written to D:\oracle\VIS\apps\tech_st\10.1.2\network\trace\listener.trc
Trace level is currently 0
Started with pid=1388
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=navya.company.com)(PORT=1521)))
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
16-FEB-2009 17:35:13 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=168822016)) * status * 0
16-FEB-2009 17:35:15 * (CONNECT_DATA=(SID=VIS)(CID=(PROGRAM=D:\oracle\VIS\apps\apps_st\appl\fnd\12.0.0\bin\reviver.exe)(HOST=NAVYA)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.101)(PORT=1659)) * establish * VIS * 12505
TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
16-FEB-2009 17:35:17 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=168822016)) * status * 0
===============================
Please help on how to resolve the issue.Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCVISipc)))
Error listening on: (ADDRESS=(PROTOCOL=TCP)(Host=navya.company.com)(Port=1521))
TNS-12542: TNS:address already in use
TNS-12560: TNS:protocol adapter error
TNS-00512: Address already in use
32-bit Windows Error: 48: Unknown error
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCVISipc)))Was this working before? If yes, what changes have been done recently?
From the above errors, it seems the database port is used by some other application, so I would suggest the following:
- Reboot the machine and see if you can start the listener
- If you still get the same error, change the port number in listener.ora file to something other than 1521 (for example, 1522) and try to start the listener then -
Oracle Apps R12 Installation error on windows
This new discussion is related to below link as last times discussion is locked ,i dont have idea why that discussion is locked(might be due to attachment link that i provided for log file )
"R12 E-Business suite installation error on Windows XP-SP3"
I have added 4 GB RAM and started installation on new fresh windows XP SP3 system with only one C: drive with 300 GB space(including staging area)
below is the log file for error
Oracle Applications Rapid Install Wizard Install log
>> Using Rapid Wizard Version : 12.1.1.9
>> Install session started : Sun Jan 12 14:57:39 IST 2014
>> Rapid Wizard source location : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz
>> Command Line arguments for this run :
=================================================================
Install Session Information
Host Name : utkarsh.sparsh
Host Operating System : Windows (32-bit)
User running Install : Uday Gite
=================================================================
InstUpgPanel
User action : Install Oracle Applications
Install type : Standard Install
Disabling OCM Configuration
InstallPanel
User action : Create configuration
Description : Creates a new instance configuration.
PortPanel
Selected port pool:
Database Port : 1521
RPC Port : 1626
Web SSL Port : 4443
ONS Local Port : 6100
ONS Remote Port : 6200
ONS Request Port : 6500
Web Listener Port : 8000
Active Web Port : 8000
Forms Port : 9000
Metrics Server Data Port : 9100
Metrics Server Request Port : 9200
JTF Fulfillment Server Port : 9300
MSCA Server Port : 10200-10205
MCSA Telnet Server Port : 10200,10202,10204
MSCA Dispatcher Port : 10800
Java Object Cache Port : 12345
OC4J JMS Port Range for Oacore : 23000-23004
OC4J JMS Port Range for Forms : 23500-23504
OC4J JMS Port Range for Home : 24000-24004
OC4J JMS Port Range for Oafm : 24500-24504
OC4J AJP Port Range for Oacore : 21500-21504
OC4J AJP Port Range for Forms : 22000-22004
OC4J AJP Port Range for Home : 22500-22504
OC4J AJP Port Range for Oafm : 25000-25004
OC4J RMI Port Range for Oacore : 20000-20004
OC4J RMI Port Range for Forms : 20500-20504
OC4J RMI Port Range for Home : 21000-21004
OC4J RMI Port Range for Oafm : 25500-25504
DB ONS Local Port : 6300
DB ONS Remote Port : 6400
Oracle Connection Manager Port : 1521
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
DBNodePanel
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
AppsNodePanel
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
AppsNodePanel
AllNodesPanel
Service Name: utkarsh
Node Name: _utkarsh
Operating System: _Windows (32-bit)
Service Name: utkarsh
Node Name: _utkarsh
Operating System: _Windows (32-bit)
Writing configuration file to: C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\conf_FPRD1.txt
Adding ports for Server0_utkarsh
Setting port s_db_ons_localport to 6300
Setting port s_db_ons_remoteport to 6400
Setting port s_cmanport to 1521
Adding ports for Server1_utkarsh
Setting port s_rpcport to 1626
Setting port s_webssl_port to 4443
Setting port s_ons_localport to 6100
Setting port s_ons_remoteport to 6200
Setting port s_ons_requestport to 6500
Setting port s_webport to 8000
Setting port s_active_webport to 8000
Setting port s_formsport to 9000
Setting port s_metdataport to 9100
Setting port s_metreqport to 9200
Setting port s_jtfuf_port to 9300
Setting port s_mwaPortNo to 10200-10205
Setting port s_mwaTelnetPortNo to 10200,10202,10204
Setting port s_mwaDispatcherPort to 10800
Setting port s_java_object_cache_port to 12345
Setting port s_oacore_jms_portrange to 23000-23004
Setting port s_forms_jms_portrange to 23500-23504
Setting port s_home_jms_portrange to 24000-24004
Setting port s_oafm_jms_portrange to 24500-24504
Setting port s_oacore_ajp_portrange to 21500-21504
Setting port s_forms_ajp_portrange to 22000-22004
Setting port s_home_ajp_portrange to 22500-22504
Setting port s_oafm_ajp_portrange to 25000-25004
Setting port s_oacore_rmi_portrange to 20000-20004
Setting port s_forms_rmi_portrange to 20500-20504
Setting port s_home_rmi_portrange to 21000-21004
Setting port s_oafm_rmi_portrange to 25500-25504
Writing configuration file to: C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\conf_FPRD1.txt
Adding ports for Server0_utkarsh
Setting port s_db_ons_localport to 6300
Setting port s_db_ons_remoteport to 6400
Setting port s_cmanport to 1521
Adding ports for Server1_utkarsh
Setting port s_rpcport to 1626
Setting port s_webssl_port to 4443
Setting port s_ons_localport to 6100
Setting port s_ons_remoteport to 6200
Setting port s_ons_requestport to 6500
Setting port s_webport to 8000
Setting port s_active_webport to 8000
Setting port s_formsport to 9000
Setting port s_metdataport to 9100
Setting port s_metreqport to 9200
Setting port s_jtfuf_port to 9300
Setting port s_mwaPortNo to 10200-10205
Setting port s_mwaTelnetPortNo to 10200,10202,10204
Setting port s_mwaDispatcherPort to 10800
Setting port s_java_object_cache_port to 12345
Setting port s_oacore_jms_portrange to 23000-23004
Setting port s_forms_jms_portrange to 23500-23504
Setting port s_home_jms_portrange to 24000-24004
Setting port s_oafm_jms_portrange to 24500-24504
Setting port s_oacore_ajp_portrange to 21500-21504
Setting port s_forms_ajp_portrange to 22000-22004
Setting port s_home_ajp_portrange to 22500-22504
Setting port s_oafm_ajp_portrange to 25000-25004
Setting port s_oacore_rmi_portrange to 20000-20004
Setting port s_forms_rmi_portrange to 20500-20504
Setting port s_home_rmi_portrange to 21000-21004
Setting port s_oafm_rmi_portrange to 25500-25504
Setting temp directory to: C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
Port Availability Check :
-- database node ports --
Database Port available: Port Value = 1521
Database Port Value = 1521...... Available
DB ONS Local Port available: Port Value = 6300
DB ONS Local Port Value = 6300...... Available
DB ONS Remote Port available: Port Value = 6400
DB ONS Remote Port Value = 6400...... Available
-- apps node ports --
RPC Port available: Port Value = 1626
RPC Port Value = 1626...... Available
Web SSL Port available: Port Value = 4443
Web SSL Port Value = 4443...... Available
ONS Local Port available: Port Value = 6100
ONS Local Port Value = 6100...... Available
ONS Remote Port available: Port Value = 6200
ONS Remote Port Value = 6200...... Available
ONS Request Port available: Port Value = 6500
ONS Request Port Value = 6500...... Available
Web Listener Port available: Port Value = 8000
Web Listener Port Value = 8000...... Available
Forms Port available: Port Value = 9000
Forms Port Value = 9000...... Available
Metrics Server Data Port available: Port Value = 9100
Metrics Server Data Port Value = 9100...... Available
Metrics Server Request Port available: Port Value = 9200
Metrics Server Request Port Value = 9200...... Available
JTF Fulfillment Server Port available: Port Value = 9300
JTF Fulfillment Server Port Value = 9300...... Available
MSCA Server Port available: Port Value = 10200
MSCA Server Port available: Port Value = 10201
MSCA Server Port available: Port Value = 10202
MSCA Server Port available: Port Value = 10203
MSCA Server Port available: Port Value = 10204
MSCA Server Port available: Port Value = 10205
MSCA Server Port Value = 10200-10205...... Available
MSCA Dispatcher Port available: Port Value = 10800
MSCA Dispatcher Port Value = 10800...... Available
Java Object Cache Port available: Port Value = 12345
Java Object Cache Port Value = 12345...... Available
OC4J JMS Port Range for Oacore available: Port Value = 23000
OC4J JMS Port Range for Oacore available: Port Value = 23001
OC4J JMS Port Range for Oacore available: Port Value = 23002
OC4J JMS Port Range for Oacore available: Port Value = 23003
OC4J JMS Port Range for Oacore available: Port Value = 23004
OC4J JMS Port Range for Oacore Value = 23000-23004...... Available
OC4J JMS Port Range for Forms available: Port Value = 23500
OC4J JMS Port Range for Forms available: Port Value = 23501
OC4J JMS Port Range for Forms available: Port Value = 23502
OC4J JMS Port Range for Forms available: Port Value = 23503
OC4J JMS Port Range for Forms available: Port Value = 23504
OC4J JMS Port Range for Forms Value = 23500-23504...... Available
OC4J JMS Port Range for Home available: Port Value = 24000
OC4J JMS Port Range for Home available: Port Value = 24001
OC4J JMS Port Range for Home available: Port Value = 24002
OC4J JMS Port Range for Home available: Port Value = 24003
OC4J JMS Port Range for Home available: Port Value = 24004
OC4J JMS Port Range for Home Value = 24000-24004...... Available
OC4J JMS Port Range for Oafm available: Port Value = 24500
OC4J JMS Port Range for Oafm available: Port Value = 24501
OC4J JMS Port Range for Oafm available: Port Value = 24502
OC4J JMS Port Range for Oafm available: Port Value = 24503
OC4J JMS Port Range for Oafm available: Port Value = 24504
OC4J JMS Port Range for Oafm Value = 24500-24504...... Available
OC4J AJP Port Range for Oacore available: Port Value = 21500
OC4J AJP Port Range for Oacore available: Port Value = 21501
OC4J AJP Port Range for Oacore available: Port Value = 21502
OC4J AJP Port Range for Oacore available: Port Value = 21503
OC4J AJP Port Range for Oacore available: Port Value = 21504
OC4J AJP Port Range for Oacore Value = 21500-21504...... Available
OC4J AJP Port Range for Forms available: Port Value = 22000
OC4J AJP Port Range for Forms available: Port Value = 22001
OC4J AJP Port Range for Forms available: Port Value = 22002
OC4J AJP Port Range for Forms available: Port Value = 22003
OC4J AJP Port Range for Forms available: Port Value = 22004
OC4J AJP Port Range for Forms Value = 22000-22004...... Available
OC4J AJP Port Range for Home available: Port Value = 22500
OC4J AJP Port Range for Home available: Port Value = 22501
OC4J AJP Port Range for Home available: Port Value = 22502
OC4J AJP Port Range for Home available: Port Value = 22503
OC4J AJP Port Range for Home available: Port Value = 22504
OC4J AJP Port Range for Home Value = 22500-22504...... Available
OC4J AJP Port Range for Oafm available: Port Value = 25000
OC4J AJP Port Range for Oafm available: Port Value = 25001
OC4J AJP Port Range for Oafm available: Port Value = 25002
OC4J AJP Port Range for Oafm available: Port Value = 25003
OC4J AJP Port Range for Oafm available: Port Value = 25004
OC4J AJP Port Range for Oafm Value = 25000-25004...... Available
OC4J RMI Port Range for Oacore available: Port Value = 20000
OC4J RMI Port Range for Oacore available: Port Value = 20001
OC4J RMI Port Range for Oacore available: Port Value = 20002
OC4J RMI Port Range for Oacore available: Port Value = 20003
OC4J RMI Port Range for Oacore available: Port Value = 20004
OC4J RMI Port Range for Oacore Value = 20000-20004...... Available
OC4J RMI Port Range for Forms available: Port Value = 20500
OC4J RMI Port Range for Forms available: Port Value = 20501
OC4J RMI Port Range for Forms available: Port Value = 20502
OC4J RMI Port Range for Forms available: Port Value = 20503
OC4J RMI Port Range for Forms available: Port Value = 20504
OC4J RMI Port Range for Forms Value = 20500-20504...... Available
OC4J RMI Port Range for Home available: Port Value = 21000
OC4J RMI Port Range for Home available: Port Value = 21001
OC4J RMI Port Range for Home available: Port Value = 21002
OC4J RMI Port Range for Home available: Port Value = 21003
OC4J RMI Port Range for Home available: Port Value = 21004
OC4J RMI Port Range for Home Value = 21000-21004...... Available
OC4J RMI Port Range for Oafm available: Port Value = 25500
OC4J RMI Port Range for Oafm available: Port Value = 25501
OC4J RMI Port Range for Oafm available: Port Value = 25502
OC4J RMI Port Range for Oafm available: Port Value = 25503
OC4J RMI Port Range for Oafm available: Port Value = 25504
OC4J RMI Port Range for Oafm Value = 25500-25504...... Available
OS User and Group Check
Domain=UTKARSH
,Username=Uday Gite
,PC-Name=UTKARSH
User belongs to the Administrators Group.
Port Uniqueness Check :
-- database node ports --
-- apps node ports --
All ports are unique.
File System Check :
-- database node mount point --
Database ORACLE_HOME created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0
Database ORACLE_HOME admin folder created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil
Database ORACLE_HOME temp folder created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\temp
Database Install Log Directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\log\FPRD1_utkarsh
Database Install Out Directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\out\FPRD1_utkarsh\templbac
Database Install Out Directory available:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\out\FPRD1_utkarsh\templbac
OCM configuration target directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\clone\\
Database System File Directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\apps_st\data
Database Log File Directory available:
Mount Point = C:\OracleApps\oracle\FPRD1\db\apps_st\data
Database Transaction File Directory available:
Mount Point = C:\OracleApps\oracle\FPRD1\db\apps_st\data
Database Archive File Directory available:
Mount Point = C:\OracleApps\oracle\FPRD1\db\apps_st\data
Database OraInventory File Directory created:
Mount Point = c:\temp
-- apps node mount point --
APPL_TOP created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
APPL_TOP admin created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl\admin
APPL_TOP mount 2 available:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
APPL_TOP mount 3 available:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
APPL_TOP mount 4 available:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
COMMON_TOP created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\comn
JAVA_TOP created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\comn\java\classes
Temp Directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp
APPL_TOP admin Install Log Directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\admin\log
Apps ORACLE_HOME created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.3
Tools ORACLE_HOME created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.2
OCM configuration target directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.3\appsutil\clone\\
OCM configuration target directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.2\appsutil\clone\\
Apps ORACLE_HOME OraInventory File Directory available:
Mount Point = c:\temp
Tools ORACLE_HOME OraInventory File Directory available:
Mount Point = c:\temp
Writing configuration file to: C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\conf_FPRD1.txt
Adding ports for Server0_utkarsh
Setting port s_db_ons_localport to 6300
Setting port s_db_ons_remoteport to 6400
Setting port s_cmanport to 1521
Adding ports for Server1_utkarsh
Setting port s_rpcport to 1626
Setting port s_webssl_port to 4443
Setting port s_ons_localport to 6100
Setting port s_ons_remoteport to 6200
Setting port s_ons_requestport to 6500
Setting port s_webport to 8000
Setting port s_active_webport to 8000
Setting port s_formsport to 9000
Setting port s_metdataport to 9100
Setting port s_metreqport to 9200
Setting port s_jtfuf_port to 9300
Setting port s_mwaPortNo to 10200-10205
Setting port s_mwaTelnetPortNo to 10200,10202,10204
Setting port s_mwaDispatcherPort to 10800
Setting port s_java_object_cache_port to 12345
Setting port s_oacore_jms_portrange to 23000-23004
Setting port s_forms_jms_portrange to 23500-23504
Setting port s_home_jms_portrange to 24000-24004
Setting port s_oafm_jms_portrange to 24500-24504
Setting port s_oacore_ajp_portrange to 21500-21504
Setting port s_forms_ajp_portrange to 22000-22004
Setting port s_home_ajp_portrange to 22500-22504
Setting port s_oafm_ajp_portrange to 25000-25004
Setting port s_oacore_rmi_portrange to 20000-20004
Setting port s_forms_rmi_portrange to 20500-20504
Setting port s_home_rmi_portrange to 21000-21004
Setting port s_oafm_rmi_portrange to 25500-25504
File Space Check :
-- database node space checks --
Disk space on system acceptable:
Database ORACLE_HOME = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0
required = 5600.0
actual = 249592.6953125
Disk space on system acceptable:
Database System File Directory = C:\OracleApps\oracle\FPRD1\db\apps_st\data
required = 20200.0
actual = 243992.6953125
Disk space on system acceptable:
Database Log File Directory = C:\OracleApps\oracle\FPRD1\db\apps_st\data
required = 950.0
actual = 223792.6953125
Disk space on system acceptable:
Database Transaction File Directory = C:\OracleApps\oracle\FPRD1\db\apps_st\data
required = 103350.0
actual = 222842.6953125
Disk space on system acceptable:
Database Archive File Directory = C:\OracleApps\oracle\FPRD1\db\apps_st\data
required = 64500.0
actual = 119492.6953125
-- apps node space checks --
Disk space on system acceptable:
APPL_TOP = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
required = 5800.0
actual = 54992.6953125
Disk space on system acceptable:
APPL_TOP mount 2 = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
required = 2800.0
actual = 49192.6953125
Disk space on system acceptable:
APPL_TOP mount 3 = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
required = 8400.0
actual = 46392.6953125
Disk space on system acceptable:
APPL_TOP mount 4 = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
required = 3100.0
actual = 37992.6953125
Disk space on system acceptable:
COMMON_TOP = C:\OracleApps\oracle\FPRD1\apps\apps_st\comn
required = 3200.0
actual = 34892.6953125
Disk space on system acceptable:
Apps ORACLE_HOME = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.3
required = 1400.0
actual = 31692.6953125
Disk space on system acceptable:
Tools ORACLE_HOME = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.2
required = 1400.0
actual = 30292.6953125
Disk space on system acceptable:
Temp Directory = C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp
required = 1024.0
actual = 28892.6953125
Host/Domain
command: ping -n 1 utkarsh
Pinging utkarsh.sparsh [10.10.12.6] with 32 bytes of data:
Reply from 10.10.12.6: bytes=32 time<1ms TTL=128
Ping statistics for 10.10.12.6:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has succeeded
command: ping -n 1 utkarsh.sparsh
Pinging utkarsh.sparsh [10.10.12.6] with 32 bytes of data:
Reply from 10.10.12.6: bytes=32 time<1ms TTL=128
Ping statistics for 10.10.12.6:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host.domain ping has succeeded
System Utilities
command: cmd.exe /c C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\bin\adchkutl.cmd C:\OracleApps\Cygwin\bin C:\OracleApps\VIS2008\VC\bin
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>echo off
/cygdrive/c/WINDOWS/system32/cmd
'which' command is available.
/usr/bin/gnumake
'gnumake' is available.
/cygdrive/c/WINDOWS/system32/cl
'cc' is available.
/usr/bin/link
'link' is available.
ERRORCODE = 0 ERRORCODE_ENDThe system cannot find the path specified.
System Utilities Availability test has succeeded
AllNodesPanel
Service Name: utkarsh
Node Name: _utkarsh
Operating System: _Windows (32-bit)
Service Name: utkarsh
Node Name: _utkarsh
Operating System: _Windows (32-bit)
DoInstallPanel - Summary Text
The Rapid Install Wizard will now install the following:
DoInstallPanel - User continued install at warning dialog.
Starting from Rapid Install Full Stage area C:\OracleApps\stageR12\oraDB\Disk1
Exception thrown in getAllProductIDs. 0
RapidWiz location: C:\OracleApps\stageR12\startCD\Disk1\rapidwiz
Install Media location: C:\OracleApps\stageR12\startCD\Disk1
Database ORACLE_HOME: C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0
Database SID: FPRD1
Database Context Name : FPRD1_utkarsh
Creating DB Context: C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\restart.xml
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\restart.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\restart.xml
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\restart.xml
Exception thrown in getAllProductIDs. 0
RapidWiz location: C:\OracleApps\stageR12\startCD\Disk1\rapidwiz
Install Media location: C:\OracleApps\stageR12\startCD\Disk1
APPL_TOP location: C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
Database SID: FPRD1
APPL_TOP Context Name : FPRD1_utkarsh
INST_TOP location: C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh
Creating Apps Context: C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
dest : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
dest : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp\restart.xml
dest : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp\restart.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp\restart.xml
dest : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp\restart.xml
Processing DriverFile = C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Processing DriverFile = C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adriapps.drv
Running Instantiation Drivers for C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adriapps.drv
Total number of processes in Current Install 5
Processing DriverFile = C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Creation of Directory - C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh Succeeded.
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adrun11g.cmd
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrun11g.cmd
backup : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrun11g.cmd to C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\out\FPRD1_utkarsh\templbac\adrun11g.cmd
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrundb.cmd
backup : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrundb.cmd to C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\out\FPRD1_utkarsh\templbac\adrundb.cmd
Step 0 of 5
Command: C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrun11g.cmd
Processing Step 1 of 5
Executing: C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrun11g.cmd
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM $Header: adrun11g.cmd 120.11 2009/03/11 21:22:03 marderiu noship $
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM ###############################################################
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM overwritten. If you were instructed to edit this file, or if you are not
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM able to use the settings created by AutoConfig, refer to Metalink Note
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM 387859.1 for assistance.
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM ###############################################################
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>(set date=Sun 01/12/2014 )
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>(set time=03:05 PM )
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 11g RDBMS : Sun 01/12/2014 03:05 PM
STARTED INSTALL PHASE : 11g RDBMS : Sun 01/12/2014 03:05 PM
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>SET JRE_PATH=C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>SET JRE_CP=.;C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\jlib\java;C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;C:\OracleApps\stageR12\startCD\Disk1\ra"R12 E-Business suite installation error on Windows XP-SP3"
Your OS is not supported.
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) (Doc ID 761567.1)
Log file located at C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\log\FPRD1_utkarsh\ApplyDatabase_01121856.log
Any details about the error in this log file?
Please review log files mentioned in (How to locate the log files and troubleshoot Rapid Install for Release 12.0.x and 12.1.x (Doc ID 452120.1)) and upload them in one zip file to any free hosting website and post the link here. Please do NOT copy/paste the contents of the log files in this thread.
Thanks,
Hussein -
Lightroom 3.2 Installation Problem on Windows 7 64-bit
Lightroom 3.2 Installation Problem on Windows 7 64-bit
I can't install Lightroom 3.2 (German) on my computer (Windows 7 Professional 64-bit).
While copying the extracted program files the following error message appears:
An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
I found out that other users had the same problem, and couldn't find a solution.
Perhaps it is a Microsoft .NET Framework related problem. But after installing .NET Framework 4 nothing changed.
Thanks for ideas to solve the problem.Thanks for your advice, Mr. McLion.
I downloaded the 3.4.1 version and started the installation as administrator. Unfortunately the same error message occured again.
Then I tried to install the 32-bit version (although I prefer a 64-bit program on a 64-bit operating system). A similar error message appeared at the same point of installation progress, but with another combination of numbers and letters in brackets. -
Installation of oracle8i on windows 2003 64 bit
Hi,
We have oracle 8.1.7 on windows 2003 32 bit, now we want to migrate our system to 64 bit windows with oracle 10.2.0.4.
But when we we are trying to install oracle 8.1.7 on windows 2003 with 64 bit we receive below error.
ORA-12546 tns permission denied.
Kindly help us to resolve the same. as after installation of 8.1.7 we can be able to migrate the database to 10g.
It is not possible to use import export due to application dependency.
Kindly advice
Abhay.ahk wrote:
Hi,
Thanks for the reply,
After doing import of the production schema on the 64bit server with 10g.
users are not able to log in into the application as password encryption description is not at all happening, as a result users are not able to log in to the application.What sort of password encryption? Did it have anything to do with the character set by any chance?
Is it ok if we apply 8.1.7.4 patch on production server, move that backup on 64 bit server & directly migrate it to 10g 64bit. (While doing the testing we have applied the 8.1.7.4 patch on the 8.1.7.0 database on 32 bit & application worked fine with no problem)As you have indicated that there were problems getting the 8i installation to work on a 64 bit server, I would again advise to upgrade to 10g on the same server and then migrate to 64 bit edition on 64 bit server. -
Need installation document for OEM 11G on windows 2003(32 bit).
Hi,
As a part of my project, i need to install the OEM 11G on windows 2003(32 bit) machines and targets also windows 2003. there i need to install again agent 11g(11.1.0.1) and target DB is 10.2.0.4.
I have done the installation of OMS successfully and installed the agent 11g on target as well. i am facing challeges in configuring the database from OMS. i tried couple of options but nothing is working out. Finally i decided to cross check the installation procedure once again with the previously completed ones. could any body share the same.
in breif i have done following.
1) installed RDBMS 11G on OMS server.
2) insalled java 1.6.18.
3) installed WLS 10.3.2
4) installed the OMS 11G(11.1.0.1)
On agent side i installed agent 11g(11.1.0.1) to monitor a database which is of 10.2.0.4 version.
agent,listeners are reflecting on OMS with up status but DB is showing as "metric collection error". i tried all the possible options like removing and reconfiguring and agent clearing and agent restart etc...but no use. also i in the Oracle installation document, they mentioned as we need to set user equavelence between OMS and agent server but not sure of this, which i have not done. is this compulsary?
Sorry for putting all the things in one single thread.
Thanks in-advance.
Regards
DBA.Did you check if the database is configured in GC?
If you can't connect using sqlplus to the user dbsnmp make a connection to the database: alter user dbsnmp identified by <password> account unlock;
In GC go to Targets, All Targets select the DB concerned and hit Configure. Enter the dbsnmp user password etc. After a while you will see the result: DB shows Up (I hope)
Eric -
Oracle database 11g release 2 installation problem on windows 7 (64-bit)
First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges -
Labview 2009 x32 and x64 installation error on windows 7 x64
When attempting to install the evaluation version of labview installed by clicking the try labview for free link on ni.com, I am experiencing an installation error.
the full error is shown in the attachment below, and is as follows;
The NI VC2005MSMs x64 installation has failed with the following error.
Error 1935. An error occured during the installation of assembly 'policy.8.0.Microsoft.VC80.OpenMP, type="win32_policy",version="8.0.50727.762".publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64"'. Please refer to Help and Support for more information.
processor is an INTEL core 2 duo
running windows 7 x64
The above error occurs with both 32 and 64 bit versions. I belive I have installed this version of labview on this computer before.
Thanks
David
Solved!
Go to Solution.
Attachments:
labview_error.jpg 48 KBWhy Does My LabVIEW Installation Fail With Error 1935?
Also see this discussion -
Oracle 10g Installation Error on Windows 2008 server
Hi Experts,
I have tried to install Oracle 10g via "51036975 ORACLE 10.2.0.4 Failsafe Server 3.4.1.5 Windows 2008" as per note no. Note 1303262 - Oracle on Windows Server 2008. Server is 64 bit server.
Oracle service is not getting started and showing as "starting" in services.msc. I cant stop the service. I have taken the restart of the server as well but no luck.
Just before the end of installation of Oracle, one pop up box named isqlplussvc opened up stating as "Failed to start the service, Error:0, the operation completed successfully".
Can you please suggest how to handle this error and start the service?
Regards,
Naresh.Hi All,
Yes, I started with Failsafe server CD only. After trying installing Oracle couple of times, once the service didnt went into starting mode & it couldnt start as well. Then I started going ahead with SAP installation and later I found that the service got automatically started.
I was under the impression that the service has to be started before going for SAP installation.
Thanks all for your replies.
Regards,
Naresh.
Maybe you are looking for
-
PDF as a container for PDF files
I have seen some PDF files that appear to be acting as a container for other PDF files. For example, the PDF Reference and Related Documentation ("pdf_reference.pdf") contains "pdf_reference.pdf", "pdf_reference_addendum_redaction.pdf" and a couple o
-
Need help now, sorry my bad english.
-
How can I start my Kodak printer with this iPad?
How can I connect iPad to printer? Could you please help me.
-
Handling load of data in PI - third party systems to SAP R3(Idocs)
Hi, Request your help in addressing the below issue: PI (PI 7.0) is receiving a huge load of messages from third party systems at one point of time and it is creating Idocs and dispatching the Idocs to SAP R3 system. Since the load that is being rece
-
Panorama Wallpaper not working
Hi, I have a question about the new iOS 7 panorama wallpaper. I looked at a few videos. They said to go to wallpapers and brightness in settings. Then select panoramas and click the one you want and it should work. I went to click on panoramas and th