EPMA process manager service is not starting

Hi gurus,
I'm working on Hyperion v-11.1.1.3 and in that i'm not able to start the EPMA process manager.It is throwing an error message as
The Hyperion EPM Architect - ProcessManager service on local Computer started and then stopped
Some services stop automatically if they have no work to do, for example, the performance Logs and Alerts Service.
When checking in the dimension server logs/eventvwr it is showing the following error message. But some times it is showing 1053 error message that-the process manager is not starting in a timely etc..
*[Engine Startup] Hyperion.DimensionServer.Program.LogMessage(:0) - An error occurred during initialization of engine ID 1: ORA-01115: IO error reading block from file 4 (block # 782666)*
ORA-15081: failed to submit an I/O operation to a disk
ORA-15081: failed to submit an I/O operation to a disk
ORA-01115: IO error reading block from file 4 (block # 782666)
ORA-15081: failed to submit an I/O operation to a disk
ORA-15081: failed to submit an I/O operation to a disk
System.Data.OracleClient.OracleException: ORA-01115: IO error reading block from file 4 (block # 782666)
ORA-15081: failed to submit an I/O operation to a disk
ORA-15081: failed to submit an I/O operation to a disk
ORA-01115: IO error reading block from file 4 (block # 782666)
ORA-15081: failed to submit an I/O operation to a disk
ORA-15081: failed to submit an I/O operation to a disk
at System.Data.OracleClient.OracleConnection.CheckError(OciErrorHandle errorHandle, Int32 rc)
at System.Data.OracleClient.OracleLob.Read(Byte[] buffer, Int32 offset, Int32 count)
at System.IO.StreamReader.ReadBuffer()
at System.IO.StreamReader.ReadToEnd()
at System.Data.OracleClient.OracleLob.get_Value()
at System.Data.OracleClient.OracleColumn.GetValue(NativeBuffer_RowBuffer buffer)
at System.Data.OracleClient.OracleDataReader.GetValue(Int32 i)
at Hyperion.DataAccessLayerCore.DALDatasetCommand.ColumnValue(Int32 index)
at Hyperion.DataAccessLayerCore.DALRowset`1.Read()
at Hyperion.DataAccessLayerCore.DALRowset`1.Execute()
at Hyperion.DataAccessLayerCore.SelectCommand`1.Execute(Action`1 callback)
*at Hyperion.DataAccessLayerCore.GenericDAO.Select[T](Action`1 callback, SetParamsEvent`1 onSetParams)*
at Hyperion.DimensionServer.DAO.DimensionPropertyManagerDAO.LoadDimensionMemberMemoProperties(Int32 libraryID, Int32 dimensionID, Action`1 action)
at Hyperion.DimensionServer.PropertyManager.LoadDimension(Dimension dimension)
at Hyperion.DimensionServer.PropertyManager.LoadProperties()
at Hyperion.DimensionServer.Library.Load()
at Hyperion.DimensionServer.Global.Initialize(String jobManagerConnectString)
at Hyperion.DimensionServer.Program.Main(String[] args)
What could be the reason for the issue and the possible resolution.I have checked in other posts in the forum but unable figure out resolution.
If it is related to Oracle client issue then where can we find out the installed oracle client in the server?
Thanks in advance

Hi John,
Thanks for the information..i have checked and came to know that the db server is down.
It is working fine now.
Could you please let me know..what all the services will not be available if Process manager service is not started?
Thanks in advance

Similar Messages

SBS Manager Service will not start

I seem to have a bit of a problem the SBS manager service will not start at all. I have tried rebuilding the SBS Monitoring database and this did not help. This started happening a few months after a SBS 2008 to SBS 2011 migration, does anyone have any ideas
as I no longer get reporting or alerts.
At first I thought it might have had something to do with permissions but not too sure how to check and what to check apart from the common things, DB permissions, permissions on folders etc but I may have missed something?

Hi,
Regarding the current issue, since you have tried to rebuild the SBS monitoring database without any help, I suggest we could try to refer to the following article this time to see if it works.
FAQ: SBS 2011. The Windows SBS Manager service terminated unexpectedly
http://msmvps.com/blogs/bradley/archive/2013/09/19/the-windows-sbs-manager-service-terminated-unexpectedly.aspx
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

Remote Management service does not start

Has Novell got a fix for the issue where the Remote Management services
fails to start automatically on XP workstations? As we upgrade our clients
to XP, this has become a major headache. The service can be started
manually, and then the Remote Control feature of ZFD will work, providing
the firewall is disabled.

Workaround is to create a batch file and put in the command:
net start "remote management"
Create a shortcut to this batch file and put it in the startup group of
All Users in the "document and settings".
Phong Nguyen
> Novell Client 4.91 will not include any of ZFD 3.x services so you'll
need
> to upgrade to 4 or preferrably ZDM 6.5. This weekend I kicked off a
ZFD 3.2
> SP3 to 6.5 SP1 migration. Even without the extra services its worth it
just
> from a support stand point.
>
> Do the details posted in this thread help any?...
>
> Newsgroups: novell.support.zenworks.desktops.3x.remote-control
> Subject: ZfD3.2, NetWare 6.0, XPsp2, will it work?
> Message-ID: <azXhd.717$[email protected]>
> Date: Wed, 03 Nov 2004 02:41:10 GMT
>
> 1. Set Windows Firewall/ICS service to manual
> 2. Set Windows Firewall/ICS service to start before Remote Management
(ie.
> Remote Management service depends on Firewall/ICS and Workstation
Manager
> services)
> 3. Configure Windows Firewall exceptions for wuser32.exe, open ports
1761 -
> 1763 (you need others depends on the services you use, see TID below)
>
> What Ports are used by ZENworks Remote Management Agent?
> http://support.novell.com/cgi-bin/se...?/10054960.htm
>
> Support for Windows XP SP2 on ZENworks for Desktops
> http://support.novell.com/cgi-bin/se...?/10092958.htm
>
> --
> Tony Pedretti
>
>

Daemon Manager service does not start

Hello,
I have a problem with Ciscoworks LMS 3.1 ... Application was working fine but after a while it started to show errors due to some processes and services that weren't enabled. I looked over the processes and services windows and realized Daemon Manager wasn´t working. I tried to start it but just doesn't happen.
I did it through the services window and also through a windows command prompt but results weren't different.
I attached the screenshots about my issue. Hope they're helpful and will be looking forward your answer.
Thank you,

Hi,
Actually, there is only one server working for all the modules of the application so it has been set up as standalone.
The server has the following features:
- Microsoft Windows Server 2003, Standard Edition, SP1
- Intel(R) XEON(R) CPU
- E5405 @ 2.00 GHz
- 2.00 GHz, 1.97 GB of RAM
Domain has been set up within the server
Antivirus Microsoft Forefront Client Security installed
Is there any bug that fixes that problem about the domain being corrupted??? would it be better if we skip that domain's comfiguration when setting up the server's system (although it would be like server does not belong to the network)??, Antivirus has not to be installed??? Policies from the firewall would need to be all opened (from the server to any device that is to be managed by the application???
According to your comments that is what i am understanding, please let me know if i am wrong and therefore What would you recommend me to do???
Thanks,

Event ID: 7024 Windows Process Activation Service will not start error %%-2147467243

Reside on a network that contains network GPOs. We are given authority to create unique GPOs for our specific LAN Web server. Our Intranet web page requires Windows Process Activation Service and another service to open. Before creating
the local GPO, the two services were in Disabled mode, but we could set them to Manual and start them. The network GPOs would reset them at random every few hours, but again we could reset them. After creating the local GPO, the WPAS is set to
Manual and will not start at all with the Title errors being generated. Administrator previously completed successful GPO mods in WinSvr2003. Is there a different way of doing GPOs in WinSvr2008R2? I cannot provide logs or further details
other than the above. Any ideas would be helpful.

> open. Before creating the local GPO, the two services were in Disabled
> mode, but we could set them to Manual and start them. The network GPOs
> would reset them at random every few hours,
Then you should adjust your "network" GPOs which we usually call "domain
gpos"...
> them. After creating the local GPO, the WPAS is set to Manual and will
> not start at all with the Title errors being generated.
# for hex 0x80004015 / decimal -2147467243 :
CO_E_WRONG_SERVER_IDENTITY
winerror.h
# The class is configured to run as a security id different
# from the caller
# 1 matches found for "80004015"
Seems you screwed up the service account or service security or
something like that...
> previously completed successful GPO mods in WinSvr2003. Is there a
> different way of doing GPOs in WinSvr2008R2?
No.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Oracel Management Service could not start

On Windows 2000, running Oracle8i Enterprise 8.1.6
When I try to start Management Service I get Error 997: Overlapped I/O operation is in progress.
Any ideas

Please let mw know if you ever found the cause because I am having the same problem.

Exchange 2013 CU2 Hab trasnport and Microsoft Filtering management Services did not start

Did you were able to fix the issue I have the same problem after Access denied for Transport service and Microsoft Filtering Management Service with Error 0x8000405 unspecified error.

Hi,
From your description, I would like to verify if there is an event 2200 in Application log. If yes, please copy the ConfigurationServer.xml file from a normal Exchange server 2013 and add it to your Exchange server to check the result.
If there is no event 2200, please take your time to post your error event for my further research.
Here is a thread for your reference.
Unable to start Microsoft Exchange Transport and Microsoft Filtering Management Service
https://social.technet.microsoft.com/Forums/en-US/7473fa45-221d-4cfe-87d4-3dc697fc5c85/unable-to-start-microsoft-exchange-transport-and-microsoft-filtering-management-service-fms?forum=exchangesvrsecuremessaging
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

I keep getting the error message "This iPod cannot be used because Apple Device Manager Service is not started." HELP!!

Yeah, so I keep getting that error message. The thing is that the service IS running, and it's set to "automatic". I've reinstalled every shred of Apple software on my PC, I've updated my virus software, and yet it still isn't working. I'm at a dead end here, so any help would be great.

I FIXED IT! Oh sweet Jesus Mary and Bob....
So after much scouring of the Googles, I found that the source of the problem was a little program called FoxyProxy Video Utility. It was causing various Windows services to crash--AMDS being the most noticeable. I uninstalled that program and PRESTO, my iPod shows up on iTunes!

Unable to start Oracle Process Manager Service

I installed EPM 11.1.2.1 on Windows 2008 R2.
Oracle database 11g.
I installed and configured every thing was working fine. But suddenly the Oracle Process Manager service is not starting.
I checked in event viewer the following error i found:
The Oracle Process Manager (EPM_epmsystem1) service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Please help me.

Hi Jasmin,
The error was:
The service did not respond to the start or control request in a timely fashion.
Thanks,
Ravi.

Unable to start EPMA PROCESS MANAGER

I'm having an issue starting the EPMA Process Manager service ERROR :
Service cannot be started. Hyperion.DimensionServer.ProcessManager.Interface.ProcessManagerException: Cannot initialize the Session Manager. ---> System.ArgumentException: An item with the same key has already been added.
at System.ThrowHelper.ThrowArgumentException(ExceptionResource resource)
at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
at Hyperion.DataAccessLayerCore.SchemaReaderSqlServer.<FillTableList>b__0(DALDatasetCommand command)
at Hyperion.DataAccessLayerCore.DataAccessLayer.ExecLoadSQL(String SQL, Action`1 onSetParams, Action`1 onRead, DatabaseContext context)
at Hyperion.DataAccessLayerCore.SchemaReaderSqlServer.FillTableList()
at Hyperion.DataAccessLayerCore.BaseSchemaReader.GetTableList()
at Hyperion.DataAccessLayerCore.DataAccessLayer.FillSchema()
at Hyperion.DataAccessLayerCore.DataAccessLayer..ctor(NameValueCollection settings, String tablePrefix, String baseNamespace, String schemaVersion)
at Hyperion.SessionManager.DAO.SessionManagerDataA...
Any help would be greatly appreciated. Thanks

Hi,
I believe this happens when you have a problem with your datasources or instances, if you have two conflicting ones then the process manager will not start up.
Can you check your planning instances and datasources and remove any duplicates or ones that could be conflicting.
Cheers
John
http://john-goodwin.blogspot.com/

Hyperion 11.1.1.3 Shares Services does not start

Hi,
We are on RHEL LINUX 5 and essbase 11.1.1.3, web logic 9.2
We did a installation and configured every thing went on well.we started all the services and every thing was working good.
when we reboot the server and try to start the Shared services .
Here comes the problem our shared service is not starting.It showing up some error.
please find the error below when we start the shared service.
CMSException occur while getting the products published content for application name: APS-9.5.0 registerFileName: APS_essbase-6001.iad6.amazon.com_91999.instance : Refer log in debug mode for details
CMSException occur while getting the products published content for application name: BPM-9.5.0 registerFileName: BPM_20695.instance : Refer log in debug mode for details
CMSException occur while getting the products published content for application name: ESB-11.1.1 registerFileName: Analytic Servers:essbase-6001.iad6.amazon.com:1.instance : Refer log in debug mode for details
CMSException occur while getting the products published content for application name: ESBAPP-11.1.1 registerFileName: ASOsamp_essbase-6001.iad6.amazon.com_1.instance : Refer log in debug mode for details
CMSException occur while getting the products published content for application name: HREG-9.5.0 registerFileName: HREG.Instance : Refer log in debug mode for details
CMSException occur while getting the products published content for application name: HUB-9.5.0 registerFileName: HSS.Instance : Refer log in debug mode for details"
Please let us know how to fix this issue.
Thanks
Vamsi

Have you met the prereqs:
When creating a Microsoft SQL Server database for use as a repository, ensure that you set these options:
Set READ_COMMITTED_SNAPSHOT = ON
Set ALLOW_SNAPSHOT_ISOLATION = ON
Also worth checking out the following Oracle Support doc:
Unable to Start EPMA Process Manager Service When Using SQL Server Named Instance or Non Standard Port (Doc ID 1162697.1)
Cheers
John
http://john-goodwin.blogspot.com/

EPM 11.1.2 hyperion integration services is not started

Hi People,
I have an issue in my EPM 11.1.2, sometimes the service "Hyperion Integration Services" not start up.
I dont know if I need this service running... all others services are running sucessfully.
Does anyone know why would I need that service running ?
Thanks in advance
Claudia

Have you met the prereqs:
When creating a Microsoft SQL Server database for use as a repository, ensure that you set these options:
Set READ_COMMITTED_SNAPSHOT = ON
Set ALLOW_SNAPSHOT_ISOLATION = ON
Also worth checking out the following Oracle Support doc:
Unable to Start EPMA Process Manager Service When Using SQL Server Named Instance or Non Standard Port (Doc ID 1162697.1)
Cheers
John
http://john-goodwin.blogspot.com/

Oracle Managemenet Service is not starting

I am using Oracle 8.1.6 on win 2k. The oracle management service is not starting and when i try to start it manually then the error i m getting is
could not start oracle management server service on local computer
ُError 997 : overlapped I/O operation is in progress
Event Viewer shows as below
No login credentials were provided. The service cannot start.

I am using Oracle 8.1.6 on win 2k. The oracle
management service is not starting and when i try to
start it manually then the error i m getting is
could not start oracle management server service
on local computer
ُError 997 : overlapped I/O operation is in
progress
Set the services to manual and try to rebounce your system so you can make sure there are no attempts to start the service from the OS Services.
Event Viewer shows as below
No login credentials were provided. The service
cannot start.
In order for the oms to start the database repository must have started. You are supposed to have enough privileges to perform this task. Make sure the repository database is up and running, and then attempt to start the OMS service.
~ Madrid
http://hrivera99.blogspot.com/

Oracle Process Manager(instance1) Service does not start

Hello Friends,
My Oracle Process Manger (instance1) windows service is not starting up.Due to which my presentation service is also down.
Kindly suggest any solution. I am using OBIEE 11.1.1.7

Thank you Reddy for your reply.
I am getting below error message in presentation server log, as well I cannot open rpd in ONLINE mode.
[2013-11-14T12:07:40.000+05:30] [OBIPS] [ERROR:31] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Could not create a system user connection to Oracle BI Server during start-up. Please check the error message and try again.
Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 43126] Authentication failed: invalid user/password. (08004)[[
File:odbcuserpoploaderimpl.cpp

EPMA server service is not starting

Hi All,
I'm unable to open dimension library,calc manager because EPMA server service is not starting.When trying to start the service EPMA Administration Server Service I'm getting the following error-"The Hyperion EPMA Server service on Local Computer started and then stopped.Some services stop automatically if they are not in use by other services or programs"
And while opening the Dimension library in EPMA I'm getting the following error-"No connection could be made because the target machine actively refused it 127.0.0.1:5251
Code:
com.hyperion.awb.web.common.DimensionServiceException
Description:An error occured processing the results from the server.
Actor:none
Kindly ley me know what could be the issue and how I can resolve it.
Thanks

Hi,
When you try to start the service, you will get this error.
So, please look into the Windows Event viewer for the Error meassage.
You can look into the DimensionServer.log and DimensionServer-err.log file for the error msg which vivek suggested you.
path for error logs: C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\epma
Regards,
mady

EPMA process manager service is not starting

Similar Messages

Maybe you are looking for