EPMA Web Tier starts then stops (SOLVED)

We have two web servers that are identical running. EPMA Web Tier runs fine on 2, but I can't start it on 1. I'm not getting any error information in the epma logs.
The only error I see is in Event Viewer which says:
The description for Event ID 0 from source HyS9EPMAWebTier cannot be found. Either the component that raises this event is not isntalled on your local computer or the installation is corrupted.
You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to saved with the event.
The following information was included with the event.
Could not initialize the Java Virtual Machine.
the message resource is present but the message is not found in the string/message table.
Any idea what I can look at or do to make this service run?
Edited by: 905304 on Dec 31, 2011 9:38 AM
Edited by: 905304 on Dec 31, 2011 9:38 AM
Edited by: 905304 on Dec 31, 2011 9:48 AM
Edited by: 905304 on Dec 31, 2011 9:48 AM

Well fixed my own issue.
I did regedit, and under HKEY_LOCAL_MACHINE -> SOFTWARE -> Hyperion Solutions -> EpmaWebReports0
Set JVMOpton40 -Xmx512m to -Xmx1024m
EPMA Web Tier now starts up and doesn't crash.

Similar Messages

EPMA Web tier service crashes automatically

Hi,
The EPMA web tier service in our application starts and crashes automatically. I have checked the log files and it is showing me following error :
<Jan 25, 2014 1:48:56 PM IST> <Critical> <Security> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
<Jan 25, 2014 1:48:56 PM IST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:960)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090303]Authentication Failed: User admin weblogic.security.providers.authentication.LDAPAtnDelegateException: [Security:090295]caught unexpected exception
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:251)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
Truncated. see log file for complete stacktrace
>
<Jan 25, 2014 1:48:56 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Jan 25, 2014 1:48:56 PM IST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Jan 25, 2014 1:48:56 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
I tried updating the file boot.properties by entering the user name & password in plain text. Still the error persists. Also the file is nor more stored in encrypted format but is stored in plain text.
Any help is appreciated. Thanks in advance.

<Jan 25, 2014 1:48:56 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Jan 25, 2014 1:48:56 PM IST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Jan 25, 2014 1:48:56 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Because Weblogic is up and running.
Try to start Weblogic again after changing the boot.properties(Username and password).
It will ask for username and password at the time starting weblogic, give correct username and password.
It will come up(max) then try to access.
I did once the same thing as shown below link,
http://hyperion-mady.blogspot.in/2013/08/sta-te-changed-toforceshuttingdown-if.html
http://prasadmadhasi.com/2012/01/11/server-state-changed-to-force_shutting_down-after-changing-weblogic-password-in-obiee-11g/
Thanks,
mady

Emac tried to start then stopped, finally after 3 attempts it started

After a hard drive failure i run my emac on an external hard drive through a fire wire.
That worked OK till yesterday when it tried to start but after a few seconds of the normal fan noise and before the screen lit up, it stopped. I hit the switch again and it did the same thing 3 times but on the 4th attempt it started but a white screen came on and told me to type "mac-boot" and hit return.
It finally started.
The external hard drive was still running OK at the time it had stopped, it was internally that it had stopped.
I took the back off the emac and vacuumed the dust from inside and after that it has since started normally every time though it seems slower to start, but I could be mistaken about that as I can't now remember noticing how long it took to start before.
Someone said the problem could be the power supply failing.
Is there any way for me to diagnose what exactly is wrong, since an emac power supply is not same as a PC power supply?
Could a PC power supply be modified to replace the emac power supply as I have a failed PC with a good power supply I could use if it would work?
Any help or suggestions would be appreciated.
Ann

Hello and thanks for your reply.
I neglected to mention that at the time of the hard disk failure I put a new hard disk inside too with the intention of using it as a back up to the External Hard Drive but I found it was easier in the end to get another external hard drive and now I use Time Machine to back up on to that 2nd external hard drive every few days.
I disconnect the 2nd external hard drive when I'm not backing up data on to it.
Most of the time when I boot up the emac it somehow knows to go straight to the 1st External Hard Drive instead of the Internal Hard Drive but occasionally it will go to the Internal Hard Drive and when it does that I have to go to System Preferences and then to Startup Disk and actually select the External Hard Drive icon and that's what I had to do every time when it was having that weird starting then stopping phase, ie, every time during the starting then stopping phase, when it did start it went to the Internal Hard Drive even after I would go into Startup Disk and select External Hard Drive it would start on the Internal Hard Drive, so in the end I didn't bother trying any more and I just connected to the internet through the Internal Hard Drive until I took the back off and vacuumed the dust out and ever since I did that it's been running normally, ie, it's always selecting the External Hard Drive again and running at what seems to be normal speed for everything too.
I just don't know why it went into that starting then stopping phase.
When it was in the starting then stopping phase the internal fan noise would stop but the little white light next to the DVD door would stay lit up so it was definitely getting some power from somewhere but it was failing to go on and boot up because the power to the internal fan had failed ie, I could clearly hear the fan stop only 3 or 4 seconds after hitting the start button.
I've just had a look at the capacitors that you suggested and they look perfect, like new in fact, they have a shiny metallic top with a + indented in the top and they are flat and they show no sign of a dried up liquid or any bubbling up anywhere.
Anyway, your reply was helpful since you ruled out the Power Supply and the capacitors, so thank you for those.
The friend who advised me how to get going again after the initial hard disk failure, ie, via the External Hard Drive connected by fire wire, did warn me not to touch anything in the back that wasn't directly related to changing the hard drive but thanks for the heads up anyway.
Ann

Video's and songs start then stop then start again

Whenever I try to play A Video or A Song, they start, then stop, then start again.
What should I do?

Try to uinstall and reinstall your audio device.
1. On Window vista,Click on Start and type Devive Manager on the search box.Look for sound, video and game controllers.Click on the plus sign,you should see the audio adapter, most toshiba laptops use realtek high definition audio.Just right click and click on uninstall.
2.After you uninstall,Click action at the top of your device manager and click scan for hardware changes.It should reinstall the audio adapter.
3. Try to play music.
Notes: Sometimes the problem is like this because of some driver updates from windows vista.
-JackBauer

Apple Mobile Device Service started then stopped

AMDS will not run !Error The AMD Service on Local Computer started then stopped. Some stop automatically if they are not in use by other services or programs. This came with 10.2 errors. I uninstalled iTunes 10.2 and installed 10.1.2.17 still have slow iTunes and it refuses to see device(iPhone) connected. What can I do now??????

This is NOT 100% correct while AMDS did run Devices still not detected. I had to Remove Apple Device Support and install AMDS from 10.0.1 Voila!! iTunes appeared in a FLASH and My IPHONE was therre and working. !Apple Error "iTunes was unable to load data class informaton from Synch Services. Reconnect or try later." Hey Apple lastest has been no help removeing this error. I can live with that al it takes is a simple click of the box to remove. I Be HAPPy again. No more updates for me I just got to figure out how to stop Auto-notification if I can.

When starting the AMDS it just says "the apple mobile device service on local computer started then stopped. Some services stop automatically if they are not in use by other services or programs."... help?

when trying to fix the ipod syncing/recognition by starting the AMD (apple mobile device) in admin tools section on my computer it came up with the message in the question aboce (the apple mobile device service on local computer started then stopped. Some services stop automatically if they are not in use by other services or programs.)
i have restarted my comp etc and reinstalled itunes... recurrent issue.
note - i wiped my ipod before this issue occurred, does this affect the problem?

I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Next see the the other actions of the following concerning the AMD
iOS: Device not recognized in iTunes for Windows

I've walked through all of the wi fi problem resolves. None have repaired my problem. It seems like it starts to connect then stops forever. Even typing it starts then stops then it will catch up?

I've walked through all of the wi fi problem resolves. None have repaired my problem. It seems like it starts to connect then stops forever. Even typing it starts then stops then it will catch up?

Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.

IPod shuffle snyc starts then stops after 2 seconds

iPod shuffle snyc starts then stops after 2 seconds

If there is nothing new to automatically sync to the shuffle from your iTunes library, the sync probably lasts about two seconds...
What are expecting the iTunes and the shuffle to do, when click the Sync button?

Unable to download program. It initially started then stopped with a message to email some one which I did, no response

I am unable to download the premier elements 13 program. After putting in the required code it gave a serial number and started to download but has stopped 20 % way through and wont restart. Instead it comes up with a message to contact [email protected] I sent an email, no response, what can I do?

Colin Geraghty
Thanks for the follow up with the additional details.
I have seen "Arvato bertelsman" described online as a "3rd party vendor". The only two program's that I have seen for extraction of the file with the actual program have been
Adobe Application Manager and Akami. So, I have no idea how Arvato bertelsman factors in your purchase at your local Australian retain shop. And, I have not seen that email
address either.
I am not sure this will work but try to contact Adobe Chat and determine if its representative can help you or direct you to a department who can. These days Adobe Chat support
seems limited for Premiere Elements, and it seems to be referring users to Ask the Community which is us (user to user). Let us give this a try...click on the following link
Contact Customer Care
Premiere Elements
Adobe ID, Signing In
Adobe ID, Signing In, Account Help
Chat Panel
If the link does not hold its set, then you will need to navigate to the Chat Panel using the above titles as guides.
Another possibility....if you have a purchased serial number...download and install the Premiere Elements 13 tryout from the following web site and then insert you purchased
serial number in them at installation. See if that works.
Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
Major consideration - be sure to carry out carefully the web page's "Note: Very Important Instructions" in order to avoid an Access Denied message.
In the absence of further input from other users here, you might consider posting your thread in the Adobe Downloading and Installing Forum.
Downloading, Installing, Setting Up
In all of this and considering all factors as you try to make things work for you, please do not lose track of time and the opportunity for a return/refund which can come only from your seller
Best wishes
ATR

Time Machine start then stop after few seconds

Hi,
I've tried to reset Time Machine (trashed the library plist file, erased the backup HD), also installed Time Machine Buddy widget.
When I start a fresh new backup, Time Machine start indexing, then stops without backup anything.
The error log of Time Machine Buddy widget is this:
Starting standard backup
Backing up to: /Volumes/TimeMachine/Backups.backupdb
Backup content size: 156.0 GB excluded items size: 1.8 GB for volume Mastoidontico
No pre-backup thinning needed: 185.11 GB requested (including padding), 1.82 TB available
Waiting for index to be ready (101)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
LaunchServices: bad alias at 0x1041d7094, size 104, CSStore size 4391026
* process 240 exceeded 500 log message per second limit - remaining messages this second discarded *
2010-02-02 18:47:12.920 ReportCrash[271:2703] Saved crash report for backupd[240] version ??? (???) to /Library/Logs/DiagnosticReports/backupd2010-02-02-184712localhost.crash
Any help to solve my problem?
Thanks!

Process: backupd [240]
Path: /System/Library/CoreServices/backupd
Identifier: backupd
Version: ??? (???)
Code Type: X86-64 (Native)
Parent Process: launchd [1]
Date/Time: 2010-02-02 18:47:12.319 +0100
OS Version: Mac OS X 10.6.2 (10C540)
Report Version: 6
Exception Type: EXCBADACCESS (SIGSEGV)
Exception Codes: KERNINVALIDADDRESS at 0x000000014c486000
Crashed Thread: 2
Thread 0: Dispatch queue: com.apple.main-thread
0 libSystem.B.dylib 0x00007fff80044e3a machmsgtrap + 10
1 libSystem.B.dylib 0x00007fff800454ad mach_msg + 59
2 com.apple.CoreFoundation 0x00007fff868377a2 __CFRunLoopRun + 1698
3 com.apple.CoreFoundation 0x00007fff86836c2f CFRunLoopRunSpecific + 575
4 com.apple.CoreFoundation 0x00007fff868369b6 CFRunLoopRun + 70
5 backupd 0x000000010000d2f1 0x100000000 + 54001
6 backupd 0x0000000100004014 0x100000000 + 16404
Thread 1: Dispatch queue: com.apple.libdispatch-manager
0 libSystem.B.dylib 0x00007fff8005dbba kevent + 10
1 libSystem.B.dylib 0x00007fff8005fa85 dispatch_mgrinvoke + 154
2 libSystem.B.dylib 0x00007fff8005f75c dispatch_queueinvoke + 185
3 libSystem.B.dylib 0x00007fff8005f286 dispatch_workerthread2 + 244
4 libSystem.B.dylib 0x00007fff8005ebb8 pthreadwqthread + 353
5 libSystem.B.dylib 0x00007fff8005ea55 start_wqthread + 13
Thread 2 Crashed:
0 ...ple.CoreServices.CarbonCore 0x00007fff85070987 CSStoreGetUnit + 84
1 com.apple.LaunchServices 0x00007fff85df44a3 _LSBundleFindWithNode + 544
2 com.apple.LaunchServices 0x00007fff85decc79 _LSFindOrRegisterBundleNode + 219
3 com.apple.LaunchServices 0x00007fff85decb2d _LSCopyItemAttributeForRefInfoWithOptions + 201
4 com.apple.LaunchServices 0x00007fff85deea77 prepareAttributeValueForKey(__CFURL const*, __FileCache*, __CFString const*, void const**, __CFError**) + 79
5 com.apple.LaunchServices 0x00007fff85dee9dc prepareDistinctLocalizedNameValue(__CFURL const*, __FileCache*, __CFError**) + 36
6 com.apple.LaunchServices 0x00007fff85dee9b3 prepareLocalizedNameValue(__CFURL const*, __FileCache*, __CFError**) + 9
7 com.apple.LaunchServices 0x00007fff85dee7bc LSPropertyProviderPrepareValues(__CFURL const*, __FileCache*, __CFString const* const*, void const**, long, void const*, __CFError**) + 51
8 ...ple.CoreServices.CarbonCore 0x00007fff85081c90 prepareValuesForBitmap(__CFURL const*, __FileCache*, _FilePropertyBitmap*, __CFError**) + 264
9 ...ple.CoreServices.CarbonCore 0x00007fff85080779 _FSURLCopyResourcePropertiesForKeys + 980
10 com.apple.CoreFoundation 0x00007fff8683f402 CFURLCopyResourcePropertiesForKeys + 98
11 com.apple.DesktopServices 0x00007fff84b30169 TCFURLInfo::FetchProperties(bool) + 91
12 com.apple.DesktopServices 0x00007fff84b2ffbd TCFURLInfo::Initialize(__CFURL const*, bool, bool) + 183
13 com.apple.DesktopServices 0x00007fff84b8e07f TCFURLIterator::NextRaw(TCountedPtr<TCFURLInfo>&) + 79
14 com.apple.DesktopServices 0x00007fff84b8e11a TCFURLIterator::Next(TCountedPtr<TCFURLInfo>&) + 40
15 com.apple.DesktopServices 0x00007fff84b8f517 TDeepCFURLIterator::NextInternal(TCountedPtr<TCFURLInfo>&, int&, int&, bool&) + 73
16 com.apple.DesktopServices 0x00007fff84b8f651 TDeepCFURLIterator::Next(TCountedPtr<TCFURLInfo>&, int&, int&, bool&) + 49
17 com.apple.DesktopServices 0x00007fff84b95629 TCopyReader::GetNextItem() + 1039
18 com.apple.DesktopServices 0x00007fff84b95fac TCopyReader::Read(unsigned long long, TCountedPtr<TCFURLInfo> const&, TCountedPtr<TCFURLInfo> const&) + 128
19 com.apple.DesktopServices 0x00007fff84b80f27 TFSCopyOperation::CopyToTarget() + 607
20 com.apple.DesktopServices 0x00007fff84b82d9f TFSCopyOperation::DoCopy(TCountedPtr<TCFURLInfo> const&) + 595
21 com.apple.DesktopServices 0x00007fff84b78a68 _NodeOperation + 469
22 backupd 0x00000001000164af 0x100000000 + 91311
23 backupd 0x0000000100015923 0x100000000 + 88355
24 backupd 0x000000010000ffc7 0x100000000 + 65479
25 backupd 0x000000010000a7e2 0x100000000 + 42978
26 backupd 0x0000000100006927 0x100000000 + 26919
27 com.apple.Foundation 0x00007fff88a2be99 _NSThread__main_ + 1429
28 libSystem.B.dylib 0x00007fff8007df8e pthreadstart + 331
29 libSystem.B.dylib 0x00007fff8007de41 thread_start + 13

I can't update my ipod. When I check for updates it says "can't connect to server"(despite internet connection being fine). Also, when I try and update software it starts then stops after 2 seconds

I can't update my Ipod. When I check for updates it says "can't connect to server" despite internet connection being fine. When I receive a software update message;I say install and it starts updating then stops after 2 seconds. Help! (It is a 3rd gen IPod touch(I think)). Presumably as a result of this, I have tried to put my library onto my gf's new iPod touch and it just charges it..doesn't download my library onto the touch).

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem

ATV Airplay (audio only) starts then stops

Pretty much what the subject says. I'll start audio playback from iTunes 11.0.4 to 3rd-gen ATV that is running latest OS 5.2.1. Music plays for 1-2 seconds then stops. Sometimes I can start it again, but it will stop. Usually I can't start it again. The only fix has been to reset ATV by turning off the power, waiting a minute or so, then turning it back on. Then music will play for hours until I stop it when I leave or go to sleep. A short stop doesn't have a problem but a long stop say overnight will usually cause the problem to happen again.
This ATV is a replacement for one that had bad wifi; the old one was much worse than the replacement but the problem still happens.

airparrot is an alt to airplay mirror
airplay mirror is cloning what you see and hear on the mac to the tv over the appletv
airplay audio is using airport express and appletv as remote speakers one can use multiple at the same time
I have an appletv 1g the old alu one and an airport express so under my airplay icon right of the volume bar in the top of itunes 11.1.1 I have the options
computer
appletv
airport express
if you don't have the icon looks like this
http://cdn.cultofmac.com/wp-content/uploads/2012/11/itunes11airplaymultiplecontr ol1.jpg
then maybe your itunes is too old
or the appletv is not present on the same subnetwork as the computer some routers keep 5Ghz and 2.4Ghz and ethernet on seperate networks and one have to bridge them
sometimes if my appletv don't want to show up on the list I can get it to by on the appletv starting a song and then stopping it again
my imac is 21.5" mid2011
and it also works fine with wifes macbook pro 13" from 2009 or something along those lines

Web Sharing Start and Stop routines...

Does any one know where to find the actual start and stop methods that get executed when you turn on/off Personal Web Sharing in System Preferences. A long while back I found where those were to do some custom event upon web sharing start-up/shut-down, and now I can't remember where those are located.

http://discussions.apple.com/thread.jspa?messageID=6792272&#6792272
answered my question, which helped me to find an error:
sudo /usr/sbin/apachectl start
Syntax error on line 241 of /etc/httpd/httpd.conf:
Cannot load /usr/libexec/httpd/modhfsapple.so into server: (reason unknown)
/usr/sbin/apachectl start: httpd could not be started
it appears that this Apache module: modhfsapple.so file is missing. (It was in the locate database, but the file is now gone) I recently had some disk errors and restored from a backup drive, but maybe the backup itself had been missing some of the same files. Bummer.
Now I am wondering if I have to reinstall 10.4 from the DVD or if I can somehow repair/reinstall just the Apache modules to get Personal Web Sharing up and running again?
It's probably safer to reinstall the whole OS, since I don't really know what other bits and pieces might be missing. I have one Intel Mac and one PPC Mac, so I don't think I could safely pilfer the missing shared object module from one to the other.

Cartoons play a few seconds then stops, then starts, then stops, just started doing this

My grandson likes to watch a cartoon with me in the evening, suddenly when I bring them up now they start to play, then stops, then starts, this just started happening, my grandson would appreciate any help resolving this. Thanks

Check to make sure your video is loading.
The red indicates what has already played and the white indicated the portion of the video that is loaded but unplayed. If you have no white bar and the movie plays and then stops it is because your video is having trouble loading in which case you wil want to select a lower quality video by clicking on the gear icon.
YouTube uses a program called Adobe Flash player to play the cartoons. If your seeing the white bar in front of your video, the first thing I would try would be to remove the Adobe Flash software and reinstall the latsest version. Allow me to explain how to do this:
Step 1: Download the Adobe Flash uninstaller from here, for help running the uninstaller Adobe has good directions on their website which you can view here.
Step 2: Once you receive the notice that Adobe Flash player has been successfully removed, download the latest version of Adobe Flash Player here. If you need help running this installer Adobe again has good insturctions here.
Once finished, go back to the YouTube cartoon you are having trouble with and let us know if your still having any issues.

Re: Satellite C660 - Fan starts then stops

Hello
Sorry for my English I am French, I have a laptop Toshiba Satellite C660 few days ago and I noticed that the fan starts and stops every minute at all times, when temperatures exceed about 40 degrees (noted with SpeedFan).
Even if I'm just the office, the Internet. However it does not heat much. Is this normal?
Before I had a laptop and the fan did not stop but almost never had little noisy. I prefer that way, but this is can be a simple matter of habit for the Toshiba ...?

it is not normal at all. it goes on and off about every 30 seconds! it is downright disturbing! it drives me nuts!
by the way, people have already complained in may 2011 about it:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59733
i upgraded the bios to version 1.4 and nothing has changed. and NO, changing anything within the power options does not make it any better.
do we have to ask for help by this gentleman?
"fan speeds are set in BIOS and BIOS causes the fan of Satellite L670 to be too noisy for no reason. it is very important to cool the CPU-GPU down but Satellite L670 doesnt do it efficiently as Sat L670 uses a 0/1 approach. i have modified BIOS of Sat L670 and it is much less noisy now and temperature usually does not rise. when temperature rises then the fan works full speed of course. but thats not often. you can write me an email if you would like to know more [email protected]"
TOSHIBA we need SOLUTIONS, not words!
thanks for your help.

EPMA Web Tier starts then stops (SOLVED)

Similar Messages

Maybe you are looking for