EPP for K9N2 Platinum/Diamond only but not for K9N2G?

Can K9N2G NEO-FD read SLI-READY DRAM's EPP data and set to run EPP enabled 1066 automatically just like nVidia 750a or 780a boards, without causing overheat or durability problems? According to Newegg and NextWarehouse, K9N2G NEO-FD runs 1066 in overclock fashion while K9N2 SLI platinum's and Diamond's spec showing 1066 is naturally supported. But, in MSI's web site, there is no difference shown on 1066 support.

It should, but I would still call it overclock settings. An overclock situation (FSB-wise) is the only chance you really have any benefit from 1066 memory.
http://global.msi.com.tw/uploads/test_report/TR10_1460.pdf
Oh, about EPP I don't know.

Similar Messages

Wireless video link example works with antenna only but not with SMA to SMA cable

I am trying to run wireless video link example https://decibel.ni.com/content/docs/DOC-22728 . It works fine if I use install antennas on my Tx and Rx USRPs. But it does not work if I use SMA to SMA cable to connect Tx and Rx USRPs. Can somebody guide me what is the reason why it is only workng with antennas but not with SMA to SMA cable.
Thanks
JK

I connect the 30 dB attenuator at RF input port of Rx USRP. But it does not work completely.
Without connecting attenuator i was not able to receive any thing on my Rx VI although it shows waveform. But after connecting attenuator receiver some times receive text messages and some times not. Also it does not work at all for images and for video it works partially but gives some error related to memory full after few mins.
I want to know why this example works completely without any problem if I use antennas, and why it does not work perfectly if i use sma to sma cable for connecting transmit and receive usrps.
Please guide
Thanks
JK

Review: Arch: Pros Only, But Not Bad

Saw this on Tux Machines. A very simple review.
distrogue.blogspot: Arch Linux is one of the few distributions to be optimized for an i686 processor- in other words, it's really fast without having to compile anything. It uses a custom package manager called Pacman.
Overall: 3.2/5- A solid distribution, but not recommended for newbies.

fflarex wrote:
I think it was a pretty bad review. It seemed to me like he was trying to review Arch using the same criteria as he would if he were reviewing other distros, without taking into account the different goals that Arch is built on. He acknowledged that Arch was only for "pros," but continued to review it as if it were not. Arch may only be suitable for competent linux users, but as far as similar distros go, Arch still greatly simplifies most administration tasks. I really don't understand how he only gave a 3.5/5 for package management, citing "too many options" and a lack of a GUI. Last I checked, a GUI was not an integral part of package management, but is handled by separate programs (and isn't there a packagekit backend being developed by someone around here?).
Off topic, but I also just have to say that xabbott: you have the coolest avatar ever!
Yea, he reviewed it as a Ubuntu user would review it, not reviewing it compared to EVERY distro or reviewing it on it's own merit. For example:
Slackware = MUCH harder to install, but he didn't mention that
Gentoo = Source-based distro...He said it's harder to install, but i always found it just as easy, perhaps easier if you don't count the time you wait around for it to compile

P965 Platinum has power but not for long - newbie error?

I press the power button and the PSU and CPU fan spin up for a second then shut right down. No beeping or anything. I removed all other components - mobo outside of case w/ 24-pin power, CPU power and CPU fan plugged in. Same result with or without RAM, with or without graphics card. D Bracket briefly shows all 4 lights when power is supplied. What's up? I'm a total newbie to assembling computers - what am I doing wrong?
I tried removing the CPU power and when I do that the PSU fan (and light) comes alive and stays alive when I press power. So it seems PSU is good.
- MSI P965 Platinum
- Intel E6600 Core 2 Duo
- Cooler Master 550W PSU
- Mushkin 2GB (2x1GB) EM2-6400 5-5-5-12 DDR2-800
- EVGA GeForce 8800 GTS 320MB
- ASUS SATA optical drive
- Western Digital SATA HDD

Quote from: NovJoe on 01-May-07, 22:49:02
Yes, you should see a 4 / 8 pin connector near the CPU bracket area where you can plug the molex connector to. Change tha 8 pin out for the 4 pin connector.
Why change the 8 pin out for a 4 pin?
Make sure CPU is seated properly. Try with vid card and 1 stick of ram only. I would suggest motherboard out of the case but you say you are doing that.
The manual on this Power Supply indicates the following which can help you decide which connectors to use: (http://www.coolermaster.com/installation_manual/Manual_550W_SLI.pdf)
P1 - ATX Connector - 12v1
P2 - 8 pin Connector - 12v2
P3 - 4 Pin connector - 12v2
P4 - 6 pin pcie connector - 12v1
P5 - 6 pin pcie connector - 12v2
P6-P8 - SATA Connectors - 12v3
P9 - P14 - Molex Connectors - 12v1
P15 - Floppy COnnector - 12v1

How can I allow send referrers in site (same domain) only but not between sites?

I don't want other sites to know from which site I went there. (Sending referrer between sites.) However, some sites only function when referrer is sent on site (same domain).
Is there a way to accomplish this? No sending referrers between sites but in sites: yes? If not Firefox, Chrome?
Thanks.

Hi , I think this addon is what you need [https://addons.mozilla.org/en-US/firefox/addon/refcontrol RefControl]
About this Add-on:
You create a list of sites, and the referrer that should be sent for each site. You can choose to send that referrer unconditionally or only for third-party requests. Additionally, you can specify the default behavior for any site not in the list.

Youtube in opening in older firefox v10 only but not in newer one.

Using WINDOWS 7, when i updates my firefox from 10 to 23, youtube page stop loading ( page not found) in newer firefox.. at same time youtube was working on my cell phone and also on laptop having firefox v10,, i restore older version 10 and youtube start load and work fine..
NOTE: youtube still not loading on any other latest browser but just loading on firefox 10

Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache
Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Advanced > Network > Cached Web Content: Clear Now'''
and
* Remove Cookies
Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Privacy.'''
Under '''History''', select Firefox will '''Use Custom Settings'''.
There is a button on the right side called '''Show Cookies'''.
If there is still a problem,
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''''' {web link}
While you are in safe mode;
Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites and see if there is still a problem. Then restart.

Siteminder authentication on j2ee Dialog Instances only but not on C.I

I am doing an Siteminder external authentication implementation on SAP
Enterprise Portal 6.40 SP16.I have a configuration that want somehow to
validate.
The issue is that the J2EE Dialog Instances should be protected by SM
Agent (they are the load-balanced nodes with the Apache web agent) but
the Central Instance (which will run on a separate node) protected just
with the default basic authentication supported by SAP and not with the
SM Agent. The idea is to be able to access the CI without going through
the Front Web Instances for troubleshooting purposes.
Can we support them on this & in what form of configuration?
I appreciate your comments on this.
Thanks
Tagore

ok I will try to add BasicPasswordLoginModule and check it out .after that as you said when I access url http://server:50000/irj -> it should directly go to portal with default authentication (not siteminder).
I'm still wondering without customizing authscheme.xml how the siteminder is doing authentication as per your scenario explained in ur previous mail.
we have customized the in httpd.conf file in   apache server like below..
<VirtualHost server:80>
    ServerName xxxxxx
Alias /siteminderagent/pwcgi/ /usr/netegrity/webagent/pw/
    <Directory /usr/netegrity/webagent/pw/>
        Options Indexes MultiViews ExecCGI
        AllowOverride None
        Order allow,deny
        Allow from all
    </Directory>
xxxxxx
xxxxx
     ProxyPass       /irj/ http://server:50000/irj/
     ProxyPassReverse /irj/ http://server:50000/irj/
</VirtualHost>
APACHE deafult port 80 will listen ur portal url access http://server/irj -> pass this resource request to webagent and check if or not resource proteced in siteminder policy server and does authentication .Once its autheticatated sitmeinder provide user id in the form header to j2ee.
if you try to access the portal by giving following url http://server:50000/irj will not work .
could you tell me the
Note: in our scenario whe have installed both webserver (IBM HTTP APACHE 6.X)and web agent & ERP AGENT & PORTAL SERVER installed on same box.
Can you send me doc how you custmozed ur webserver for proxy & reverse proxy to my e-mail id :[email protected]
anyhow may I know your e-mail id ?
Thanks
Tagore

Cannot get mail, server unavailable error message n my Yahoo account only, but not on others

Although I have no problem getting hotmail and other yahoo account messages, my PRIMARY email account has been returning an error message "Cannot get mail, server unavailable". But my server is working just fine for everything else except my main yahoo account. Could anyone shed some light on this for me? Thank you all!!

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Netflow is displaying inbound data only, but not outbound

We use NetQos to monitor our Netflows. Some tunnels at our remote site show both inbound and outbound netflow data, yet some tunnels only show inbound. The sh run confirms that both tunnels are set up in equivilant manner i.e. "ip flow ingress", "ip flow egress", and "ip route-cache flow". The NetQos tool looks accurate, what am I missing? jimmyc

hi Jeff,
Check if the alerts are raised properly, just to reassure check the table /sapapo/am_alert has the alerts you have generated. I suggest delete all alerts & check teh table has zero entries & then generate new alerts. Then try to display, if it does not appear please check if there is any system dump in ST22. While displaying alerts in alert monitor if there is a system dump (for soem reason) you dont get a dump screen, instead you get zero alerts.
I am not sure if you are using any user exit for the alert display, if yes please check them too.
Regards,
Vasu

HT204053 I have two apple ID's and it's causing problems in my contacts. It repeats the same address and sometimes displays email address only but not the full contact details? How do I get my contact list the same in all my devices (iMac, iPhone & iPad (

I have two Apple ID's and it's casing problems on my contact list as it repeats the address in somecases and in others it only displays email address for a contact. I want to have the same contact list and details on all my devices (iMac, iPhone 4S & iPad Mini)? Is it possible?

By using 1 of the 2 ID's instead of both, choose one, move everything in the other one to the one you chose and stop using it.

TS4148 I am from India. i was updating my iphone 3gs but in between got an error(6) and then my phone was not able to do anything. hence i restored my phone and now its being started only but not accepting SIM card hence can't proceed further.

SIM card not accepting, hence can't process fruther

Hi @imobl,
You sound like an Apple support guy who hasn't been able to answer my questions.
To respond to some of the points you made,
- I did not ignore Ocean20's suggestion. If you has read my post, you would have known that I took my phone to the apple service centre where they tried this restore on THEIR machines. I am assuming that Apple guys know how not to block iTunes. So I actually do not understand your point about me trying the hosts file changes on my machine. Do you not believe that apple tested this issue with the correct settings?
- you also give a flawed logic of why the issue is a hardware issue. You mentioned that If I thought that the issue was with the software, i should try a restore and getting it to work. The problem is that my error (23), and many others comes up when the restore fails. And you would be astonished to know that not all errors are hardware errors. Sometimes even software errors prevent restores. Funnily enough Apple itself mention that 'in rare cases, error 23 could be hardware related'.
- all Apple has done so far is replicate the issue. I don not know how anyone can conclude that the issue is a hardware issue.
And by the way, I am not certain that this is a software bug. Again if you read my Posts, you will notice I only want a confirmation,/proof that the issue is hardware related as they mention..
Please refrain do. Responding if there is nothing to add.

Muvo Slim download mp3 files only but not playing!

i just bought this Muvo Slim with 256MB memory.. if i plugged it on my computer it can be opened and still can download files.. but once you remove it from the computer, it wont open.. even the opening logo nor the the blue backlight won't open!, it started acting this way right after i plugged it on my friends mp3 (not creative) player.. it has a USB output connector, and 5volts output which is the voltage as a regular USB provides!.. can this still be fixed?.. cause i did tried loading the uograded firmware, and it did recognize the player, but when disconnected to the computer it just went blank!.. need help here! thanks!

On Linux you need proper GStreamer support to play mp3 files with the HTML5 media player.
*media.gstreamer.enabled = true
*Bug 794282 - Enable GStreamer in official builds

I have US holidays (read only) but not UK. Why when I live in

UK. Hubby has same phone and his is UK. I checked in setting and everything says UK????

Using Safari on your iPhone, go here
-> http://www.apple.com/downloads/macosx/calendars/unitedkingdomholidaycalendar.htm l
tap Download then tap Yes when it asks if you want to subscribe to the calendar.

I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page, but not all or pages 1-5. Can this be overcome?

I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page only, but not all or pages 1-5. I need to go to the next subsequent page and command to print current page; continuing with this procedure until all pages are printed one at a time. Can this be overcome?

You can use printPages(1, 5), however I need to know how you print current page.

Allow a document to be viewed in the browser but not downloaded to the local machine

I have SharePoint 2013 deployed and RMS integration enabled. and am willing to install Office Web Apps. I want to enable users to view documents in the browser only but not be able to download them to their desktops. This would mean there is no "save
as" button in the browser-based viewer and no ability to download the documents to the desktop to be used with the desktop Office apps (word, Excel, etc.).
I understand that I need RMS and Office Web Apps to do this. Could someone please confirm if I'm able to accomplish the goal above and, if so, how I do it?
Thanks very much in advance for your help.

When you enable OWA. you can read the file online and edit it
The only way to allow users to read but not edit or print a file would be to implement Windows Rights Management. You can read about that here:
http://msdn.microsoft.com/en-us/library/ms458245.aspx
It won't be doable with SharePoint permissions only as, even with read only, the documents is still downloaded to the client cache to read and as such can still be retrieved from there.
You need to follow below steps for IRM
http://webcache.googleusercontent.com/search?q=cache:OZ-m0M4Z5J4J:msmvps.com/blogs/ivansanders/archive/2012/06/08/check-out-the-weather-forecast-for-teched-2012.aspx+&cd=8&hl=en&ct=clnk&gl=in
http://webcache.googleusercontent.com/search?q=cache:4XRMy2NZG1MJ:sp-vinod.blogspot.com/2013/08/configuring-information-rights.html+&cd=4&hl=en&ct=clnk&gl=in
If this helped you resolve your issue, please mark it Answered

EPP for K9N2 Platinum/Diamond only but not for K9N2G?

Similar Messages

Maybe you are looking for