EPrint pics in B/W & grey tones not in color, What settings must I change?

1. HpPhotoSmart 7510;
2. Windows 7 64-bit;
3. ePrint pics in B/W not color;
4. no
When color pics are sent to printer email, pics printed in Black & White not color.  What settings need changing to enable color printing.  Pages sent from computer to printer have color.   

You say pages instead of photos in the last line of your post. So are these pictures embedded in the document?  Or, are you sending photos and they are printing from the photo tray in black and white instead of color?  Photos should automatically print in color.  Now, If there are pictures embedded in they body or another document, there is a setting at eprintcenter.com that needs to be checked.
Once you have logged into your account at ePrint Center, go the gray button labeled "ePrint settings" and click on in it. Then go to the tap labeled Print options, then look at the section labeled "Color Mode" and see if greyscale is selected. If it is change that option back to color and then click  on save, then reattempt to print the ePrint. 
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Similar Messages

  • I'm trying to order album and I'm getting this message:Your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can proceed with this book.

    I'm trying to order an album and I'm getting this message:
    Your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can proceed with this book.
    As far as I can see I have placed pictures on all the pages. I admit that on some pages I could have placed 3 or 4 pictures but I chose to use ony one or two. Could that be the problem?

    Yes -
    Your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can proceed with this book.
    The error seems pretty clear - you must have a photo in evey photo frame in order to place your order - so you must either change the layout (if you only want one photo on a page then use a layout with one photo) or put photos in the spots you have not filled
    LN

  • My "Page back" buttom is not in function, which setting must be changed?

    I can only use the chronic to get back on pages I seen before, the page back buttom is only grey and not activated.
    Is this a kind of setting?

    Thank you Xircal,
    that's my idea... I installed the backward-dropmarker and it's also grey, not active.
    I tried all combinations on my MacBook Pro: Mouseclick with alt, cmd, ctrl, fn: nothing worked. Didn't get the list of visited sites.
    Zippo

  • When I click on Touch ID & Passcode, the Touch ID is grey and not available. What am I doing wrong?

    I am trying to set up the fingerprint feature and it won't let me click on the 'Touch ID'.  It's a light grey and when I touch it nothing happens.

    Check in Settings > General > Restrictions to see if this feature has been restricted.

  • When closing Firefox after upgrading to Ver. 4 it no longer prompts to save tabs. Advice given was: "Settings may be set incorrectly If your Firefox settings are configured differently, the prompt will not occur. " What settings do I need to change?

    Every time I close Firefox I lose all the tabs and have to re-establish them when re-starting Firefox. I cannot find any provision in the options to change that.

    A slow boot time can be caused by login items.
    User Login Items:
        Flux
        NoSleep
        ClipMenu
        Canon IJ Network Scanner Selector2
        BetterTouchTool
        USBOverdriveHelper
        TotalFinder
        Gmail Notifr
    Open System Preferences > Users & Groups > Login Items
    Remove one login item noted above then restart your Mac to test. It may be one or multiple items causing the slow boot.

  • Web sites are not in color, what to do?

    The only information I have is that when I downloaded Mozilla Firefox a year and a half ago, no web sites are in color, including mine. I've searched and asked and dug and given up. Now, I need Firefox to be functional.

    Hi judithleedew,
    First question I have to ask is are your other applications in color? Have you tried Safari? Is that in color? If none of your programs are in color, it's a system issue and you have better luck at the Apple forums.
    If you are sure it is only Firefox, I'd try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
    You could also try [https://support.mozilla.org/en-US/kb/Managing-profiles?s=create+a+new+profile&r=2&e=es&as=s#w_creating-a-profile Creating a new profile].
    You might find some good stuff in the [[Websites look wrong]] article as well.
    Hopefully this helps!

  • What settings do I change so that Dreamweaver does not force me to use version control?

    I don't know what setting I have changed - I have worked in my site and ftp'd to my server for the past week. Something changed today.
    There is a red X next to Version Control in the Site Setup for X Site dialog box.
    In Files view, in the Remote Repository pane, there's a link to define version control settings.
    I don't have subversion, nor do I have a need. I just want to see my files on the remote server. Get/Push work. However, there is no server tree view. Tips?

    Hi AcronymCity, Same happened to me, around the time you posted in Dec (DW vs 5.5)
    I got my server files back by
    1- In preferences (cmd-U) - > site -> Dependant files  -> UNchecking "prompt on get / check out"
    2- In preferences (cmd-U) - > site -> Dependant files  -> UNchecking "prompt on put / check in"
    3- Further down same dialogue - > check save files before putting
    4- Then to "files" window. -> I then manipulated the "repositories" button, which was resisiting being unpressed before, to unpressed (toolbar on "files" window)
    This got rid of the "repository files" request and I booked the sites in with the server in the usual way via the Manage sites/Edit dialogue. All previous ftp server data re-inputted.
    Now, whether this is what did it or whether it was something else, I dunno, (I used the blessed CyberDuck in the meantime). Hope this works for you if you haven't solved it some other way ... nosada1592

  • Scanning Paper Copies of White and Black Photos:  in Grey scale or in color mode?

    I started to scan old black and white paper photos of my deceased father. He shot most of these photos around 1940. The photos are typically around 9.5cm x 6.5 cm (around 3.7 x 2.5 inches), sometimes they are even smaller. Typically, 4-6 photos are glued on each page of a dark photo-album paper. I do not have available any negatives.
    My main objective: enjoy to look at the scanned photos on my 19 inch PC Monitor Display. I can imagine, that I will also print a couple of them in something close to their original dimensions.
    For the scan, I am using my home flat-bed scanner (it is a 3-year old Canoscan N676U). I am scanning at a resolution of 300, 400 or 600 dpi. I experimented both with a "grey scale" and a "color (photo)" scans. I am not sure what is better: scan in grey scale? Or scan in color?
    Scanning in "Color" results (this is at least my subjective impression) in a little bit more/better contrast. However this results also in some yellow/brown/sepia taint, that I do not like very much (the taint becomes especially disagreeable, if I eventually use the PSE Editor to adjust the lighting). Therefore, after the scan I typically use the PSE V5 Editor "Enhance" --> "Convert to Black and White" to get rid of the yellow/brown taint.
    Can somebody make me some recommendations and tell me which one is the better method:
    1) Scan with "Colors" and then use the PSE Editor to get rid of color taints? Or
    2) Scan in "Gray scale" (which allows me to scan with a greater resolution)?
    At this time, I have the impression, that both methods results in more or less comparable results. But I fear somehow, that I might be currently missing some important aspects and that I could regret it much later, at a time where I will not have anymore the originals (they do not belong to me, and I have to return them).
    I found the following two contradictory recommendations:
    1) In the PSE Forum "Tips, Tools, How-To and Techniques....", in the Topic "Scanned Images", I found following Post:
    brent bertram - 11:14am Oct 18, 05 PST (#5 of 6)
    AND, even Black & White photos typically benefit from being scanned as a color image, rather than grey scale. You have much more flexibility in editing and adjustments.
    2) A Canon Dealer recommended me to scan my black and white images with grey scale, not with colors.
    Thank You very much for Your Feedback.

    Robert.....
    I would go along with the advocates of scanning in colour as it gives you far more flexibility to tweak the colour channels in editor. For your final version you can then either convert to grayscale or,preferably in my opinion, use one of the PSE desaturation methods,and retain the file as RGB.
    A very useful source of scanning information can be found at http://www.scantips.com/

  • HT4356 How can I configure the printer to print only grey tones from my iPad 2? Printer=Hp6520

    How can I configure printer with iPad to print only grey tones? This works fine from my laptop - not air printing from that one though.  I can't find anywhere on the iPad how to do printer settings and this also seems not to be available as an option when doing a printout.  In fact, no options seem to be available.  Thanks in advance for reacting!
    Hermi

    There is currently no option for this. You can give Apple feedback here:
    http://www.apple.com/feedback/ipad.html

  • All of My B&W pics have a unwanted sepia tone???

    All of my B&W photos have a sepia tone to them when I open them in Bridge or Photoshop. Opening them in Autodesk Sketechbook Pro no such issue.
    When a folder containing B&W photos is loading in Bridge the thumbnails are initially grayscale but develop the sepia cast after it has completely opened.
    In Photoshop I can go to view - proof setup - monitor rgb and get rid of the sepia cast My color setting are appear to correct.

    Thanks  for reply. I'm currently working with cs5 in Windows 7 Home.  After opening Photoshop and I go to file- open the selected file opens with all the B&W  pictures  without having the toning sepia.  However,the moment I select a file to open  the resulting thumbnail at the bottom of the window has the sepia toning and the file opens  with the sepia toning. Also remember original email i do not have this issue when opening a B&W file in Autodesk Sketchbook Pro which makes me believe it is a Photoshop issue.
    kurt
    From: "Noel Carboni " <[email protected]>
    To: " ooncho " < kurtpen @comcast.net>
    Sent: Sunday, February 26, 2012 11:56:05 AM
    Subject: All of My B&amp;W pics have a unwanted sepia tone???
    Re: All of My B&W pics have a unwanted sepia tone???
    created by Noel Carboni in Photoshop General Discussion - View the full discussion
    In short, your monitor profile is bad or at least doesn't even closely match the output characteristics of your monitor.  This profile is associated with the monitor at the operating system level.
    What operating system do you have?
    -Noel
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link .
    Start a new discussion in Photoshop General Discussion by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http ://forums.adobe.com/message/2936746#2936746 .

  • Iphone 4 Alerts Tones Not Working / Ringer Is WORKING KINDLY REPLY ME

    HI , PLEASE HELP ME I WANT TO FIX THIS ISSUE THAT I AM GETTING PLEASE HELP
    MY ISSUE IS IPHONE 4 ALERTS TONES NOT WORKING AND CALL RINGER IS WORKING.. PLEASE HELP ME!

    If the iPhone came from the US then it is locked to AT&T. To unlock an iPhone the original carrier is the only one who can unlock the iPhone and AT&T will not unlock iPhones. So there is not official way to unlock the iPhone 4.
    At this point there is no way to hack the iPhone 4 running 4.2.1 to unlock it either so the phone and messaging apps will never work. You basically have an iPod touch.

  • My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

    My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

    Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!

  • I used a partitioned HDD for time machine, using a partition already containing other data files. I am now no longer able to view that partition in Finder. Disk Utility shows it in grey and "not mounted". Any suggestions of how to access the files?

    I used a partitioned HDD for time machine, using a partition already containing other data files. I am now no longer able to view that partition in Finder. Disk Utility shows it in grey and "not mounted". Any suggestions of how to access the files? Does using time machine mean that that partition is no longer able to be used as it used to be?
    HDD is a Toshiba 1TB, partitioned into two 500GB partitions.
    OS X version 10.9.2

    Yes, sharing a TM disk is a bad idea, and disks are cheap enough so that you don't need to.
    Now
    Have you tried to repair the disk yet

  • In Pages when I go to FIND how can I change the highlight colour of the found word?  At the moment it is a very pale grey and not easily seen.

    In Pages when I go to FIND how can I change the highlight colour of the found word?  At the moment it is a very pale grey and not easily seen.

    Well, it might depend on the nationality of your keyboard, but on my US keyboard, the tilde ("squiggle") is above the TAB key; on a Mac, ⌘-TAB cycles through the active applications and ⌘-tilde cycles through the windows in the front application.
    When you do a Find, Pages selects an instance of your search text (the next one after the current selection, I think, but I didn't check that). It doesn't make the document window the front window, though. If you click in the window to bring it to the front, it moves the selection (or insertion point) to wherever you click unless you click on or above the ruler. Try clicking at the top of the document window after you do a find; say somewhere near the document name. Now you should see the highlighted selection (your search text). If you click back on the Find window, the selection will go grey again, unless you hold ⌘ down while clicking.

  • IMovie '11, what steps am I missing, when I go to SHARE, IDVD is grey and not activated, only ITUNES and MEDIA BROWSER? I want to burn a DVD.

    iMovie '11, what steps am I missing, when I go to SHARE, IDVD is grey and not activated, only ITUNES and MEDIA BROWSER? I want to burn a DVD.

    Share your movie to the Media Browser. Then, in iDVD, drag your movie in from the Media Browser at the bottom right.
    THe Share to iDVD option is only activated if your source material is DV or AVCHD.

Maybe you are looking for

  • Error: The operation can't be completed because the original item cannot be found

    Hi folks. I had to get a new MacBook Pro (old one died twice in two weeks despite being loved and cared for) today (ouch-  skint!) and now need to install Final Cut Studio to it.  "No problem" thought I, "I will use Remote Disc!" Assuming that my eve

  • Link to an asset up sampled

    I get this msg  (the doc contains a link...) and have read the other blog about going back and upsampling, however, how do know which images is the problem?

  • LV2011 bug - Error wired to boolen function breaks when saving for previous version

    I just downloaded LabVIEW 2011 this morning. I created this VI and saved it for LV2010 to see how it would deal with it. I opened the VI in LabVIEW 2010SP1 and the error wire is broken. There were no warnings about problems saving this VI as an earli

  • JSR 168 APIs

    Dear All, We are trying to get content from IBM Websphere Portal v5.1  and display in our SAP portal . The content in IBM portal is stored in portlets . IBM recommended us to call their JSR 168 API's to just grab the content. We only want the content

  • Demantra Planning Applications Error

    Hi all, We are on Demantra 7.3.0, Oracle 11g (11.2.0) and we have the next problem: When trying to lounch from Collaborator Workbench any of the applications from the Planning Application tab (ie: Member Management..) it results in the next error: "C