EPrint software on 2008 server

I had install the eprint software on a window 7 professional computer and I can print by doing file --> print from my laptop to the office in a differnet location.
I  than install the eprint software on a windows 2008 R2 server and when I try to print it said print failed......
Please help, the eprint software create a e printer on the printer folder without error and the port is the @hpeprint.com email address.
Thank you

Hi,
The HP ePrint software is not compatible with any server OS.
Below you may find any supported OS for the HP ePrint Software:
http://h20331.www2.hp.com/hpsub/us/en/eprint/specifications.html
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Slow network printing on Windows 2008 Server

    Hi,
    We are just testing/configuring a Windows 2008 (x64) server to replace an aging Windows 2000 file & print server.
    I have added the print services role and added a network TCP/IP printer (a HP Laserjet 2200).
    When I print to this printer from either the server (via print test page) or from a client, it takes around 30 seconds before the print will start to print. On our Windows 2000 server, this would print immediately.
    I have insalled the HP 2200 driver that came with Windows 2008.
    Anyone any ideas where to find the problem causing the delay?
    Thanks,
    Kenny

    Hello,
    I have done some research and I find firewall component of the antivirus software such as Mcafee might cause similar network delay issues.
    If you have installed AV softwares on Windows Server 2008, please try uninstalling it temperately and test whether this will make any difference.
    Moreover, You could also try disabling TCP Chimney Offload, RSS, Receive Window Auto-Tuning Level on Windows Server 2008 one by one to see whether it makes any difference.
    To disable TCP Chimney Offload, follow these steps:
    a.   Use administrative credentials to open a command prompt.
    b.   At the command prompt, type the following command, and then press ENTER:
           netsh int tcp set global chimney=disabled
    To disable RSS, follow these steps:
    a.   Use administrative credentials to open a command prompt.
    b.   At the command prompt, type the following command, and then press ENTER:
           netsh int tcp set global RSS=disabled
    To disable 'Receive Window Auto-Tuning Level', follow these steps: :
    a.   Use administrative credentials to open a command prompt.
    b.   At the command prompt, type the following command, and then press ENTER:
           netsh interface tcp set global autotuninglevel=disabled
    I hope this helps. Thanks.
    Regards,
    Neo Zhu

  • Windows 2008 server 32 bit support

    Hello,
    Is MaxDB officially supported for Windows 2008 server 32 bit  platform?
    Thanks,
    Jose

    Jose Lopez wrote:>
    > OK, then perhaps mention specifically W2003 in the download link?
    Hmm... about what download link are you talking?
    The one in the download area here in SDN?
    If so, then this is not relevant for SAP customers as they should get all their software via DVD delivery or the Service Marketplace downloads!
    In the service marketplace download sections there are no restrictions given, since the Product Availability Matrix (https://service.sap.com/pam) contains all the release/support information.
    In general, the PAM is the one single place to check for supported versions.
    regards,
    Lars

  • Windows 2008 Server License Key not working on VirtualBox

    I have a validated licensed copy of Windows 2008 Server and I need to load it on a Virtual machine (I am running Oracle VirtualBox). When I had the server running on a hardware based server it worked fine. The license key activated and it worked. Now when
    I load it onto the VirtualBox solution it fails. It will take it when I run the manual command but will not show my server as activated. This is for my private use only (internal home LAN) but I would prefer to have the activation be correct since I use this
    setup to help keep fresh on Windows 2008 servers while being on a Linux OS with a VM software loaded.  What can I do to have this server activate correctly under the VirtualBox?
    Thanks,
    Tom

    Hi Tom,
    Base on my experience, after we convert a physical computer system to virtualize environment we need to reactive it, with MAK active method we need keep this vm to connect to
    internet and with KMS method please confirm this vm can communicate with your KMS server.
    The related KB:
    Understanding MAK Activation
    https://technet.microsoft.com/en-us/library/ff793435.aspx
    Volume Activation in Disconnected Environments
    https://technet.microsoft.com/en-us/library/dd981010.aspx
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Interesting problem with RAID, Windows 2008 server, and Ubuntu

    sooooo, i got the system working and linux loved it.  just adored it.
    however, Windows did not.  Windwos 2008 server hard locks from time to time.  i fianlly figured out that it had to do with the RAID 0 i was running, that didn't really succeed.
    However, when i rebuilt the RAID and everything on it, it refuses to recognize the disk, sayign that windwos cannot determine if this drive has a valid system volume on it.
    Ubuntu 9.04 server, however, just took it and made it work great.
    I enabled the PCI Bus SATA to be Master in the BIOS, and then Windows Server 2008 said that it could not determine if the drive was bootable.  Then i went back and redid the raid, and it did the original error.
    I inserted a windows xp disk, destroyed the RAID, and then installed the software on a NEW disk.   While it installed fine, it gave me an IRQL_not_less_than_or_equal error.  It boots in safe mode, but no where else.  I tried installing the NVRAID and MCP55 drivers in safemode and what not, but still, it refused to cooperate.  I went back to ubuntu, this time the desktop/workstation versions, and i am doing an alternate install with RAID...much to my disappointment becuase now i will have to use VirtualBox to isntall windows...and if that fails, i'll be really pissed.
    My settings are as follows:
    SATA Controller 0-5 enabled
    NVRAID- enabled
    PCI BUS SATA- Option ROM Enabled, Master Enabled, and 0040h latency
    MAC LAN- same as above
    MAC LAN1- has master disabled, but the other stuff is the same
    Serial port A is on AUTO, B is disabled, and floppy is disabled.
    Option Rom is PFA relocation.
    Also, my AEC A6880 is giving me a ROM expansion error, even though, in both OSes it can be seen....usualy.  I just want to fix it
    lastly, my LSI PCI-E scsi adapter is not being seen at ALL. 
    thanks guys.

    Quote
    Also, my AEC A6880 is giving me a ROM expansion error, even though, in both OSes it can be seen....usualy.  I just want to fix it
    lastly, my LSI PCI-E scsi adapter is not being seen at ALL. 
    Turn off onboard raid ctrl 1st. There are conflicting.
    Quote
    I enabled the PCI Bus SATA to be Master in the BIOS, and then Windows Server 2008 said that it could not determine if the drive was bootable.
    Known issue, partition mess:
    http://www.google.bg/search?hl=bg&ei=W-l3Sq_4NMbdsgbHnKmmBQ&sa=X&oi=spell&resnum=0&ct=result&cd=1&q=windows+cannot+determine+if+this+drive+has+a+valid+system+volume+on+it.&spell=1
    Quote
    I inserted a windows xp disk, destroyed the RAID, and then installed the software on a NEW disk.   While it installed fine, it gave me an IRQL_not_less_than_or_equal error.  It boots in safe mode, but no where else.  I tried installing the NVRAID and MCP55 drivers in safemode and what not, but still, it refused to cooperate.
    What's the BSOD error? Are you using XP installation disk with included SP3?

  • Error 0x80070490 trying to launch VM without SCVMM on Windows 2008 Server R2

    Hello everybody,
    I get a weird issue trying to launch a VM.
    This is the current situation : I get a server, Windows 2008 R2. I've only install Hyper-V and Failover Cluster. I can create a VM but when I try to launch it, I get an error message into a popup (translated from french) : "The application encountered
    an error during modification of 'vm_name' state". "'vm_name' could not be initialize". "Could not initialize machine remoting system. Error 'Element not found'. (0x80070490). "Could not find a usable certificate. Error: 'Element not found'. (0x80070490)."
    So, I'm unable to launch my vm's.
    I'm not using SCVMM yet. I want to resolve this issue before.
    I read some articles and posts about SCVMM certificate issue but I'm not using SCVMM.
    More fun, I read articles about this issue but on Windows 2008 Server (not R2) : problem resolved by a fix, unapplicable on my Windows 2008 R2 :)
    I'm totalyblocked and ain't got no idea how I can resolve it.
    If someone gets I idea ...
    Cheers,
    Nicolas

    Environment: Windows 8.1 in an Active Directory Domain (2012R2) with MS Certficates Services support NAP/Health Registry, etc. 
    Error:  Attempts to start a Hyper-V VM on a machine generates the error message Error 0x80070490 trying to launch VM:
    "'vm_name' could not be initialize". "Could not initialize machine remoting system. Error 'Element not found'. (0x80070490). "Could not find a usable certificate. Error: 'Element not found'. (0x80070490)."
    Note: 
    VMM can manage other Hyper-V servers in environment from same machine, just not local machine.
    VMM on remote machine generates same error message when attempting to manage new VM machine
    Certificates - Service (Hyper-V Virtual Machine Management) on Local Computer shows 0 certificates under vmms\Personal
    Fixes Attempted and Failed except for #5!
    1) hotfix directly: Windows6.0-KB967902-x64.msu -> Failed: 0x80096002, Windows Update Standalone Installer.  The certificate for the signer of the message is invalid or not found.
    2) hotfix via pkgmgr: PkgMgr.exe has been deprecated. Please update scripts to use DISM.exe.  0x80070307
    3) Reset Certificates: 
     Start > Run > MMC
     Add the Certificates Snap-In
     Select Service Account
     Under the Select Account to Manager, select Hyper-V  Image Management Service
     Complete the Snap-In Wizard
     Expand the Certificates under Personal Category
     Notice the certificate generated has been created ‘for the future’ (assuming you’re suppose to revert the date & time to 2010, the certificate should display as invalid because it was created at 2013)
     Delete the Certificate(s)
     Go to the Services Console and Restart all Hyper-V Services
     Result: No certificate auto generated
    4) Uninstall / reinstall hyper-v service and management service addons from Windows features.  
    5) ‎did the following from http://technet.microsoft.com/en-us/library/ff935311(v=ws.10).aspx (WORKED!!! -> Note, their PS script has an error, add a dash(-) before the word recurse)
    reg add "HKLM\Software\Microsoft\Windows NT\CurrentVersion\Virtualization" /v "DisableSelfSignedCertificateGeneration" /f /t REG_QWORD /d 1
    24 ca 36 b5 bd 6d ef 7e eb aa a5 74 df e5 fd 41 ef ab 1c 29
    $certs = dir cert:\ -recurse | ? { $_.Thumbprint -eq "24ca36b5bd6def7eebaaa574dfe5fd41efab1c29" }
    $cert = @($certs)[0]
    $location = $cert.PrivateKey.CspKeyContainerInfo.UniqueKeyContainerName
    $folderlocation = gc env:ALLUSERSPROFILE
    $folderlocation = $folderlocation + "\Microsoft\Crypto\RSA\MachineKeys\"
    $filelocation = $folderlocation + $location
    icacls $filelocation /grant "*S-1-5-83-0:(R)"

  • Problem with 10.2.0.5 patch on Windows 2008 Server R2 64bit

    Hello
    I have HP server with Windows 2008 Server R2 64bit. I installed
    latest 64-bit version of Oracle Database 10.2.0.4 and everything works fine and later installed the patch 10.2.0.5 (64 bits) as the Oracle maintains that with the R2 version of the system it is necessary to correct work.
    Now, after uploading the patch database starts and closes
    after about 15 minutes and my alert log file is changed to the binary version which do not see anything (means that after patch installation (10.2.0.5) the alert log file isn't normal text file and it looks like that:
    Źýţ cśy iµ•eű .Ź ťy ťy Ř®y hčN)
    You can read only the beginning and it's very large - 13 Mb after unpacking from ZIP.
    Can anyone met with this configuration and knows how to solve
    problem?
    This is the link to my strange alert log file:
    http://www.2shared.com/file/22MFap1V/alert_orcl.html
    I attached my spfile.ora file too:
    http://www.2shared.com/file/gUmID0fh/SPFILEORCL.html

    Your alertlog is corrupted, it could be something about a virus or even a problem with disk drives. Have you scanned your server with anti-virus software? Have you scanned the disks?
    Last questison: Have you upgraded your database after you installed the patch?
    SQL> SHUTDOWN IMMEDIATE
    SQL> STARTUP UPGRADE
    SQL> SPOOL patch.log
    SQL> @ORACLE_BASE\ORACLE_HOME\rdbms\admin\catupgrd.sql
    SQL> SPOOL OFFIf not, please read the "readme" file which comes with patchset (do not just run the above commands without reading Oracle documention).
    Best Regards,
    Gokhan
    If this question is answered, please mark appropriate posts as correct/helpful and the thread as closed. Thanks

  • Install error 11gR2 on Windows 2008 Server R2

    Hello,
    I have a question about an installation error I received on Windows 2008 Server R2 while trying to install the 11g R2 on an test machine. I had downloaded both cd's and extracted them and copied the first cd into an new directory and then tried to copy the second cd into this directory, unfortunately I didn't saw that this step failed. As I started the installation I first didn't saw any error, later the installer brought some exceptions due to missing files (oc4j, context).
    I then copied the second cd again (this time it worked) and continued with the installer until it finished.
    My question is now, as there are some files missing, do I have the possibility to reinstall the software and which is the best way? Must i first uninstall the software and install it again or does it work if i start the installation (i select only software) again selecting the existing ORACLE_HOME so that the installation is overwritten.
    I hope you can help me with an solution for this.
    Many thanks in advance to all for your help.
    Regards
    Luis

    Hi,
    If in one oracle home you have a successful installation, oracle will automatically deny the installation of a new software in this existing home. If you have a filed installation in some oracle home, then later you can install in the same directory as oracle does not consider this failed installation as a proper oracle home hence it overwrites everything. Even you can't uninstall this failed installation because as i told you that this is not considered an oracle home. but, better way is to run installer and see whether you have an oracle home registered in the directory in which you want to install again and if you find one, then do a deinstall. If you don't see this directory as oracle home, then still better to delete what ever is inside this directory and do the installation.
    Under current scenario, your installation is fine and you should not worry.
    Salman

  • How to create listener in 11g RAC on windows 2008 server

    Dear All,
    i worked on win 2003 and linux 4, 5 too. i have installed oracle RAC on both windows and linux.
    now i have installed oracle RAC11gR1 on windows 2008 server.than installed oracle software . now i want to create listener from db_home which i am facing problem.
    i m starting netca from db_home. following the insturction when i finishing it , the proces get started but in the middle is showing the listener on node1 and node2 can't be created.
    please guid me how i willl be able to creat it.
    2nd poing how to create asm instance on RAC11gR1. is it need to install saparate home like 10g for that or i can create from 11g software home.
    thanks,
    sher khan

    thanks for the update ,
    dear oracle 11g rac recomends to create ocr and voting disk on asm.
    i followed the documents they are saying you have to install grid control infrastructure and than need to create asmcfs.(automatic storage management cluster file system.).
    how to create asmcfs to avoid the gridcontrol, if its must is it need to install on one node or both nodes.
    can you plz guide me how to do this .
    thanks,

  • Oracle 10g on Windows 2008 Server Std. edition

    Hi all
    We create two partitions C 80 Gb, D 300 GB on HP Server XEON Dual Processor with 6GB installed with Windows 2008 Std. Edition server 32 Bit
    We try to install Oracle 10g 32 Bit - We get the following problems
    a) By default it should take the highest partion i.e d:\oracle\product etc.
    but it takes c:\users\administrator\documnets\oracle\product which is wrong
    However we correct it by typing the correct path. Brows does not take to D partition
    b) On proceeding further - >Installation aborts and and we get messages
    unknowkn , unknown etc. for 3-4 aspects.
    Windows 2008 server has service pack 1 installed. We installed Service Pack 2 also but without any benefit. Further we also tried to install after removing all firewall , anitvirus etc. but again of no use.
    User connected was administrator while installation of Oracle 10g 32 Windows.
    We never get any problem with the same CD /Dump on Windows XP, Windows 2003 Server
    Kindly suggest some remedy
    Suresh Bansal

    With due respect i wish to request you to please see below thread:
    Re: Oracle 10g
    Which is making me confused.
    Regards
    Girish Sharma
    There's a specific version for Windows 2008 (10.2.0.4), ready to download:
    http://www.oracle.com/technology/software/products/database/index.html Reply by Werner

  • What are share point server 2013 & Share point Designer 2013 & Office 365 & Yammer & Share point 2013 & Windows server 2008 server & Windows Server 2012 Server Data Center?

    I need some clarifications.
    What are share point server 2013 & Share point Designer 2013 & Office 365 & Yammer & Share point 2013 & Windows server 2008 server & Windows Server 2012 Server Data Center? How each them are related in collaboration system?
    Is Share point server 2013 and Share pointer Designer 2013 available in 32bit version? If not, then how to use it in 32 bit machine by using any VMs?
    Thanks
    Senthil

    SharePoint Server 2013:
    http://office.microsoft.com/en-us/microsoft-sharepoint-collaboration-software-FX103479517.aspx
    SharePoint Designer 2013:
    Designer is used to develop SharePoint pages using HTML/CSS/JS as well as SharePoint Designer Workflows
    Yammer: 
    https://about.yammer.com/
    Windows Server is Windows, but the Server OS. SharePoint runs on top of supported Windows Servers editions (see http://technet.microsoft.com/en-us/library/cc262485.aspx).
    SharePoint Server is 64-bit only (trial:
    http://technet.microsoft.com/en-us/evalcenter/hh973397.aspx), although Designer does have a 32-bit edition (full product:
    http://www.microsoft.com/en-us/download/details.aspx?id=35491).
    You will need the capability to run 64bit VMs. Minimum recommended all-in-one VM for SharePoint is to allocate 24GB of RAM, but you can get away with as little as 12GB (I wouldn't go below that). Because of this, it generally rules out 32bit OSes as a virtual
    machine host.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Is owb 11g r2,supported by 64 bit windows 2008 server

    is owb 11g ,r2 supported on 64 bit windows 2008 server.
    is it true that : OWB 11g,r2 is supported only for 32 bit windows 2008.

    There is no 64b client for windows at this time. You can check on Oracle for available downloads.
    http://www.oracle.com/technetwork/developer-tools/warehouse/downloads/software/index.html

  • ORA-12560:TNS:protocol adapter error on windows 2008 server(32 bit) for 10g

    Hi Friends,
    I am installaing Oracle 10g database on windows 2008 Server(32-bit) and when the Database is getting cretaed and during the database files copying portion it's throwing the error :
    ORA-12560: TNS:protocol adapter error
    I tried intsllaing 10g software alone and invoked DBCA and again during the database files copying portion it's throwing the same error
    what could be the issue?
    Regards,
    DB

    Pl indicate which version of "10g" and which version of Windows 2008 - R1 or R2 ?
    HTH
    Srini

  • Does Windows 2008 Server run ok under Mac Mini Bootcamp?

    Does anyone have any experience of installing and running Windows 2008 Server on a Mac Mini (of which has either Mac OS or Mac OS Server installed), under Bootcamp?
    I currently have an old Dell with Windows 2008 server which acts as my Domain Controller, Exchange Server for a small home-office network. It's due an upgrade as the hardware is so old (and noisy!) and like the idea of having a nice compact, quiet Mac Mini, but want to make sure it can carry out the same duties under bootcamp on Win2008?

    Windows 2008 can be installed in Boot Camp.  However I don't believe it is officially supported by Apple so there may or may not be issues with installing the Boot Camp Drivers (or future updates to the Boot Camp drivers.)  Not something I'd be recommending for a "production" environment.  If this is a test/dev system, then probably worth trying, depending on how critical your network uptime is.
    Also, you didn't mention if your Dell came with Windows 2008 preinstalled, but if it did, then likely it has a "branded" version of Windows that won't activate correctly on non-Dell hardware.  (If your Windows disks have "Dell" on them, they won't work with the Mac.)  So you may need to purchase a retail or volume license copy of Windows 2008.
    In general, for a server running as a DC & Exchange, you'd want RAID1 as a minimum so that would be the Mac Mini Server, not the "desktop" Mac Mini.  Unless you have one lying around, you're looking at something around $1500-$2000 to start, depending on whether you can transfer your existing Windows 2008 & Exchange installations.  (Another $500-$2000 depending on what vesions of Windows & Exchange.)  And probably 8GB of RAM since Windows 2008 & Exchange on 4GB is pushing it.  Considering the costs, I suggest you look at the Dell T110 series or the HP Proliant 110 series.  Both lines are very quiet and are supported for Windows 2008 from the factory, including Windows Small Business Server, which includes Exchange.  While not as small as a Mac Mini, they are mini towers and about the size of a typical PC desktop.
    If you really wanted a small footprint, then HP has a "microserver" series.  You'd probably need to call HP to get the build you want as the online ordering is limited for that model.  From Dell, there is the Zino model desktop.  Again, not supported for a "server", but you were going to consider a the non-server version of the Mac Mini, then the Zino has at least a chance of you reusing your existing versions of Windows if they're Dell branded, thus saving your something in the range of $500-$2000 for new software.  (But I would NOT recommend a non-server chassis without RAID1 hard drives, so the Zino is not my choice.  I just offer it as a possibility if you accept the risk of an unsupported installation, as would have been installing Windows 2008 in Boot Camp.)
    So yes, it will work.  But I wouldn't recommend it for a production environment, especailly if you have the "desktop" computer without RAID1.

  • LMS 4.0 eval on 180-day Windows 2008 Server Standard R2 SP1 eval

    I'm having difficulties installing the LMS 4.0 eval on an 64-bit 180-day Windows 2008 Server Standard R2 SP1 eval.
    The installer says that it needs 2008 Server Enterprise, but the LMS 4 release notes say 2008 Server Standard works.  It also says that R1 is supported, but makes no specific reference to R2.  I'm assuming that if R1 is supported, R2 would be supported as well, no?

    You need to install a patch for this OS support:
    http://www.cisco.com/cisco/software/cart.html?imageGuId=DB56D2FEE377F4846A9F42F81C48EAC18C2C9967&i=rs
    CiscoWorks_LMS_4.0.x_WIN2K8_R2.exe
    Make sure you follow the install instructions in the readme

Maybe you are looking for