Eprinting - blank page being generated

Everytime I send an attachment (.pdf), the printer via email, it will "print" or better yet cycle a blank page prior to printing the actual document desired. Nothing in the subject line or body of the email, just a blank email with a .pdf attachment - as I only want the pdf to print, nothing else.
When I arrive to the location where the printer is, I can open and wirelessly print the same document (direct, via the wireless router - not emailing).
Does anyone experience same or have a fix?
The printer in question is a photosmart premium c310

When sending an email with attachment to ePrint Center, the email prints along with the attachment. If the email is blank, the page would be blank. Please try adding a short message in the email and see it that is printed on the previously blank page.
I was an HP employee.
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

Why there is blank page when generating dunning letters

Hi Expert,
I setup 4 levels for dunning procedure and selected "Always dun?" and "Print all items" for all 4 levels in print parameters. When I printed the level 2 dunning letter there was one blank page generated beside the dunning letter itself. When I printed the level 3 dunning letter there were 2 blank pages generated besides the dunning letter itself. When I printed the level 4 dunning letter there were 3 blank pages generated beside the dunning letter itself.
Did you have any experience like this? And how did you solve this problem (suppress the blank page)?
Thanks,
Norman

Hai Norman,
You can change the Dunning Form Page windows in SE71 T.Code
Check it once in Dunning form in FBMP t.code, better ABAPer help.
Regards
Madhu I

Blank pages in generated Word document

I am using RoboHelp and I have created a document similar to
others that I have created. I generate printed documentation to
Microsoft Word, and it seems to have extra blank pages scattered
throughout the document. When I edit it with Word, I see these
Section Breaks that are in there. I have to delete those and then
re-format my page breaks to get it to work right. This is a real
pain to do especially if I have to make updates to the document
(which I know I will have to do). Any ideas as to why this is
happening all of a sudden? There is really nothing unusual about
this document but perhaps I am missing an option or something is
extra that shouldn't be there.
Thanks for any help!
Evelyn

I think a read through this should help. See also the
associated Print Issues topic.
Click
here.

Empty pages being generated when report spans multiple pages

hi folks
I have a problem when generating my pdf form that I hope you can shed some light on.
Firstly, I have a table within a table.
Eg. For each line of Table_1, a new page must be displayed.
Then for Table_2 a list of employees with the matching criteria in line_1 of Table_1 are displayed on page 1. For the next line of Table_1, the same, and so on.
My problem comes in when there are too many employees in Table_2 to fit on a single page, they span onto the next page (as they should), but the pdf form also now displays blank pages at random.
Something like this:
Page 1
--empty
Page 2
-Table_1-Line_1
-Table_2 (lines 1 - 30 of 35)
Page 3
-Table_1-Line_1
-Table_2 (lines 31-35 of 35)
Page 4
-Table_1-line_2
-Table_2 (lines 1 - 10 of 10)
Page 5
--empty
Why the empty pages? Any help will be much appreciated.
thanks.
Also worth noting. If Table_2 doesn't span multiple pages, then I don't get the empty pages.
thanks in advance
Anton Kruse

Hello,
it is clear why your first page is blank. That is because you set "top of next page" (tab binding) for every line of the outer table so every "section" starts on the new page. That is why even the first page starts on the second page (top of NEXT page for the first line is SECOND page).
About the last page... I have experienced problems when I used margins - when your page content is long, but not that long to break the page and you use a margin so the last row + margin should break the page, the last row is left on the last-1 page and the margin "appears" on the last page.
Hope this helps a bit, Otto

Eprint blank pages on PhotoSmart 5510

Hi, when I send emails to my PhotoSmart 5510 the page is blank except for the "from" line. Please help. Thanks.

Hi Pberman374,
I see that your having problems printing emails. I have a couple of questions for you.
Do you have problems printing word documents?
Are you using ePrint or Airprint when printing emails?

Blank Pages being "printed"

When I "print" a PDF from Excel, I'm get occasionally a blank PDF. It shows up fine in the Print Preview dialog in Excel. If I quit Excel, this will usually get the PDF to save properly.
This is not always convenient as I am often running several Excel files at once.
Any ideas on why this is happening?
Acrobat Professional is 7.0.9, Excel is Office 2007, Windows is XP pro

When I "print" a PDF from Excel, I'm get occasionally a blank PDF. It shows up fine in the Print Preview dialog in Excel. If I quit Excel, this will usually get the PDF to save properly.
This is not always convenient as I am often running several Excel files at once.
Any ideas on why this is happening?
Acrobat Professional is 7.0.9, Excel is Office 2007, Windows is XP pro

HP 2175 and OS 10.4.3 = Blank Pages

I have seen lots of threads for several brands of HP printers. So I thought I would start another thread. I had some problems before with a blank page being printed at the beginning of any web print (Safari, Explorer, Netscape). But Now ALL I get are blank pages. I loaded the most recent driver from HP but it did not work. I removed it and loaded the original driver but it did not work. I tried the shareware program that repairs printer driver set-up and that did not work.
Has anybody found a fix to this!! This is ridiculous
G4 Mac OS X (10.4.3)

Sorry, no real fix to this that I've come up with. The HP folks have been no help at all so far and I've been too cheap to shell out $39.95 for their telephone tech/talk time on the hope only, no guarantee, that it would help. However, since I can't print wirelessly directly from the internet, i save pages to the web receipts folder. I seem to be able to print those out just fine...well, at least most of the time.... Why? Go figure... It is still ridiculous....

While creating a PDF document usinf Adobe Acrobat Pro 9, it generates additional blank pages.

While creating a PDF document using Adobe Acrobat 9 Pro, it generates additional blank pages. How do I resolve this issue?

I might make a wild guess that you are using WORD and have used hard page breaks. If that is the case, then likely what happens is when you print to PDF the document is being reflowed to match the printer and the forced page break may end up on the next page and be forcing a second page. Just a guess.

Html report shows blank page if pdf report is also generated

Steps to reproduce
1. Generate any html report with multiple pages.
2. The first page of the report will be shown.
3. Now generate the same report in pdf.
4. Go to the first report again (html report) and try to go to the next page
(second page)by clicking on the forward arrow > at the bottom of the report.
I am using java to invoke reports

Hi Karen,
I would like to provide the document "Report Design: Best Practices and Guidelines " to you and hope it can provide some help.
Avoiding Blank Pages
Sometimes, you will see blank pages when you output reports to a physical page format such as PDF or print. Generally, this will happen when the size of the report body exceeds
the size of the page. To ensure that all the contents fit on a single page, the body width plus the margins should be less than the defined page width. A textbox or other report item can cause the width of the body to exceed the page width, even when the portion
of the item that exceeds the width has no visible contents. In addition, report items growing horizontally (matrix data regions and images set to automatically Autosize or Fit) can also cause the body to grow.
Reference:
<http://technet.microsoft.com/en-us/library/cc966445.aspx>
Best Regrads,
Halin Huang

Print scaleType:showAll, generates 2 pages, the correct page and one blank page

Hello,
So I have a the following function:
private function printJobCreator():void{
var printJob:FlexPrintJob=new FlexPrintJob();
printJob.start();
printJob.addObject(printableInvoice, "showAll");
printJob.send();
invoiceIndex++;
printAll();
It seems to kind of work. However when it prints, it creates one page that is the right page, and one page that is blank. This isn't going to work for me because I have to run batches of many pages, so having every other page as a blank page isn't an option.
Additionally, my goal was to print multiple pages in one printJob for batch reports. This unfortunately doesn't seem like it is going to work. I was able to make a component that essentially would repeat container.addChild(printableInvoice) for each index in an object, each printableInvoice containing some dynamic concept, however I can't for the life of me get it to print like this.
So the current solution is annoying because for each invoice you have to go through the print dialogue again. Any Ideas? I realized I could do multiple printJob.addObject() calls, but this doesn't work for me because of the blank page issue.... So I either need to solve the blank page issue or generate a UI object that has multiple printableInvoices in it and print that UI object.
Any help?
Joel

This is the flow, I don't see how it could be adding twice. The important stuff happens when the printAll(); function is run.
<fx:Script>
<![CDATA[
import mx.controls.Alert;
import mx.events.FlexEvent;
import mx.printing.FlexPrintJob;
import mx.rpc.events.ResultEvent;
public var Orders:Object = new Object();
public var printOrders:Array = new Array();
public var postOrder:String="";
public var invoiceIndex:int=0;
private function init():void{
getDataResult.token = orders.getData();
getDataResult.addEventListener(ResultEvent.RESULT, Orders_resultHandler);
private function Orders_resultHandler(event:ResultEvent):void{
Orders = getDataResult.lastResult;
for(var i:int=0; i <= Orders.length-1; i++){
if(Orders[i].print == 0){
printOrders.push(Orders[i]);
postOrder=printOrders[0].orderid;
for(var t:int=1; t <= printOrders.length-1; t++){
postOrder = postOrder + ","+printOrders[t].orderid;
private function orderToShipSorter():void{
private function printAll():void{
if(invoiceIndex <= printOrders.length-1){
printableInvoice.generateInvoice(printOrders[invoiceIndex]);
private function printOrderResult(event:ResultEvent):void{
private function checkLogin(event:ResultEvent):void{
private function printJobCreator():void{
var printJob:FlexPrintJob=new FlexPrintJob();
printJob.start();
printJob.addObject(printableInvoice, "showAll");
printJob.send();
invoiceIndex++;
printAll();
protected function printableInvoice_batchGeneratedHandler(event:Event):void
printJobCreator();
]]>
</fx:Script>

Blank Page at the end of generated PDF Document

Hi,
my problem is that ADS is generating a blank page at the end of my report.
I fill the ADS with a template and an XML stream.
The XML stream contains multiple orders. Each order has several detail data. It is a requirement that every order object has to appear at a new page.
XML structure:
- Order
-- Group1
--- fields of Group1
-- Group2
--- Fields of Group2
My template looks like this:
- body page subform: Order (Default binding: $record.Order[*]; Repeat Subform for Each Data Item: yes; After: Go To Next Page)
-- subform1
--- fields of subform1
-- subform2
--- fields of subform2
Because of the "Go To Next Page" at the Order subform a new page is rendered each time an order ends. This leads to the blank page after the last order is processed.
Does anyone know how I can suppress the blank page at the end of the document?

You may use a forum for xsl fo.

When I click for a new tab this window now opens ... "chrome://nspdlmsd/content/newtab/newtab.html" - I want it to go back to being a blank page.

As above.
For the past few days now, whenever I click 'open new tab' in firefox it opens immediately at the url posted above. I did, unsuspectingly which is how they get you if you are not careful, installed MySearchDial but removed it completely through add/remove and start/search. I even have new windows opening up with content I do not like at all ... my home page is the same again, but I cannot seem to figure out how to get my new tab to open in a blank page again (btw at the bottom of this 'chrome' page there is an mysearch.com icon - I have googled 'how to remove this' with no success).
I do not use Chrome and do not have it listed as one of the operating programs on my computer. However, when I start/search "chrome" there is a complete list of files and folders that are found and I am unsure if I should delete them all since many of them appear to be directly associated with Firefox. Please - this is frustrating ... what can I do to get rid of this garbage on my computer?

The "MySearchDial" app needs to be removed in 4 places.
1) Go to "add / remove programs" in your windows control panel select mysearchdial and remove it.
2) Open your Firefox browser then click the Firefox tab at the top left and select options. You will need to change the start page settings back to your preferred start page.
3) Again under the Firefox tab select "add-ons". In the add-ons manager you will need to remove mysearchdial from both "plugins" and "extensions"
4) In your search bar (top right of address bar" use the drop down menu and select "manage search engines". You can restore your preferred search engine and remove mysearchdial from the menu.
This should remove all the components of the nuisance hijacker and restore your browser back to your preferred settings. If you are comfortable with a more in depth removal I would also suggest going to your "programs" folder within the "C" drive of your machine and deleting the "MySearchDial" folder altogether. However, only do this AFTER you have uninstalled it from your system and if you are familiar with this type of removal.

Blank page generated from export to pdf but not when sent to viewer

I have a report where I am suppressing a subreport when no data is found and it works correctly when sending it directly to the CrystalReportViewer. However if I Export it directly to a pdf it is creating a blank page. Can someone please tell me how to fix this issue?

Not enough info, need version and patch level.

Apps being moved around with sync - unwanted blank page inserted

Ever since I bought a few new apps (craigspro+, vision test, etc, nothing too big or fancy) last night, when I sync my phone with my iTunes, it moves all the apps around, inserts a blank page onto my phone, and most of my new apps are inserted on a page AFTER the blank page and therefore I can't reach them once the phone is disconnected from my iMac and in hand. I've tried restoring, I've tried manually moving them all around in iTunes, and every time i hit "Apply" they bounce back to where the computer wants them and I can't even reach the new apps. What's up and how do I fix this???

Hi,
you can automaticaly fix previously made documents using the Preflight tool.

Problem with Book Being Blank Pages

Tried to download newly released Private Vegas by James Patterson on a Mac Yosemite 10.10, I got back two blank pages, the version I was using was 1.7, so I installed 4.0, and still had the same problem. So I tried to download on my other PC which is Windows 8.1, got the book Adobe ver 1.7. So is this a Adobe issue on a Mac, also for Information, other books will download to a Mac, no problems at all.
Thanks

...sorry...it might have been the IPhoto 09.....

Eprinting - blank page being generated

Similar Messages

Maybe you are looking for