EPS placed in InDesign CC, clicking "Edit with Illustrator CS6" will launch application but not open document.

Happens irregularly, if you can call "several times a day" irregularly. Solved by quitting Illustrator and restarting. Coworkers report seeing the same issue.

jimtealiii schrieb:
Ah yes, the "change your decades old workflow" solution. I think I'll try verifying my disk permissions first. Wait, what's a PDP file?
If you are using EPS files between Illustrator, Photoshop and InDesign you should definitively change your workflow as EPS does not support color management nor transparency.

Similar Messages

There was away (before Mavericks) I could single click on an email and it would highlite but not open. I could either delete or second click and the email would then open. Can anyone tell me how to configure the prevue pane to that end with Mavericks?

There was a way (before Mavericks) I could single click on an email in the "prevue pane" and it would highlite but not open. I could then either delete it or click again and it would open. With Mavericks that doesn't seem to be available making it impossible to delete an email in the prevue pane before I open it. Its frustrating to have to go through all the monkey motions when I know I want to delete it from the get-go. Does anyone know who to configure for that operation? I'm using an iMac.

Wow, have you ever seen 1 Billion in hard cash? If not, I assure you it exists as well.
Try not to pick apart what others write because you "have not seen it."
I run TWO programs for protection of my MAC now and have been for sometime b/c developers of them become complacid thinking MAC is impermeable.
My MAC locked me out of it and two externals and when I finally did get back into them Norton Anti-Virus found a "worm." When I asked the program to find the origin, it was traced back to an email, as you said, that I opened unintentionally. I still have two external HDs for backup and a cloud backup now.
When ClamX ran after Norton was finished, ClamX found what it called as "spyware," and it's origin was in my email also. I tried to delete the emails after the programs (both) identified the infected files, however once deleted and the computer is restarted, they were still there because I ran the scans again.
Now since we are no longer talking about how to turn on and off the view pane in apple mail; riddle me this, why can't the developers of these antivirus and antispyware/malware programs get together and develop ONE PRODUCT that catches 90-95% of the viruses/worms/spyware/malware ect that get onto MAC's? Is it because they are too busy thinking they don't exist?
I still run both programs and feel protected between the two. If Norton said it was a "worm" then I believe it was a worm and if ClamX called it "spyware" then I believe it is spyware.
I had to wipe my MAC and do a fresh install to get it working again, then I had to open one of those externals (which was very, very difficult) multiple times until finally it displayed the message "you can view, but not change the data." I exported as much as I could to my cloud and I had to format both of those too.
I still run both programs as I feel protected between the two. If Norton tells me it is a "worm" then I believe it is a "worm;" if ClamX tells me it is "spyware" then I believe it is "spyware." If it happens again, which my hope is that it won't, I will be more than happy to send the infected files to you!!
Try not to "forum rage." Support forums to post experiences and find answers, not nit-pick or claim not existance b/c you have not experienced it for yourself.

Renaming datafiles in control files with database mounted but not open

Hi,
I moved a database (physical files) from one server to another. I need to modify the contents of the control files since the directory structure of the servers are not the same (and I can't change that).
I know I can use ALTER DATABASE BACKUP CONTROLFILE TO TRACE to produce a script that I can than modify and run with the instance started, database mounted but not open, and that will recreate the control files. I don't want to do that.
I was also told I can modify the datafile entries in the control files by starting the instance, mounting but not opening the database. Then I can issue the (this is the part I need help with) ALTER DATABASE RENAME FILE <file1> to <file2>. When I tried this it complains that <file1> is not found. Obviously the command I used is not the right one,,, what is the right command for what I want to do.
Thanks,
Gabriel

Move all datafiles from one directory to an other without recreate controlfile :
SYS@DEMO102> select file_name from dba_data_files
2 union
3 select member from v$logfile
4 union
5 select file_name from dba_temp_files
6 union
7 select name from v$controlfile;
FILE_NAME
E:\ORACLE\ORADATA\DEMO102C\CONTROL01.CTL
E:\ORACLE\ORADATA\DEMO102C\CONTROL02.CTL
E:\ORACLE\ORADATA\DEMO102C\CONTROL03.CTL
E:\ORACLE\ORADATA\DEMO102C\EXAMPLE01.DBF
E:\ORACLE\ORADATA\DEMO102C\REDO01.LOG
E:\ORACLE\ORADATA\DEMO102C\REDO02.LOG
E:\ORACLE\ORADATA\DEMO102C\REDO03.LOG
E:\ORACLE\ORADATA\DEMO102C\SYSAUX01.DBF
E:\ORACLE\ORADATA\DEMO102C\SYSTEM\SYSTEM01.DBF
E:\ORACLE\ORADATA\DEMO102C\TBS102_1.DBF
E:\ORACLE\ORADATA\DEMO102C\TBS102_2.DBF
E:\ORACLE\ORADATA\DEMO102C\TEMP01.DBF
E:\ORACLE\ORADATA\DEMO102C\UNDOTBS01.DBF
E:\ORACLE\ORADATA\DEMO102C\USERS01.DBF
14 rows selected.
SYS@DEMO102> create pfile='E:\oracle\admin\DEMO102\pfile\pfile102.ora' from spfile;
File created.
SYS@DEMO102> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.Here, I move all datafiles mentionned above, and modify my pfile for new controlfile directory. Then :
SYS@DEMO102> startup pfile=E:\oracle\admin\DEMO102\pfile\pfile102.ora
ORACLE instance started.
Total System Global Area 272629760 bytes
Fixed Size 1288940 bytes
Variable Size 163579156 bytes
Database Buffers 100663296 bytes
Redo Buffers 7098368 bytes
Database mounted. --Note that we are in mount state
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: 'E:\ORACLE\ORADATA\DEMO102C\SYSTEM\SYSTEM01.DBF'
SYS@DEMO102> alter database rename file 'E:\ORACLE\ORADATA\DEMO102C\USERS01.DBF' to 'E:\ORACLE\ORADATA\demo102\USERS01.DBF';
Database altered.
SYS@DEMO102> alter database rename file 'E:\ORACLE\ORADATA\DEMO102C\SYSAUX01.DBF' to 'E:\ORACLE\ORADATA\demo102\SYSAUX01.DBF';
Database altered.
SYS@DEMO102> alter database rename file 'E:\ORACLE\ORADATA\DEMO102C\UNDOTBS01.DBF' to 'E:\ORACLE\ORADATA\demo102\UNDOTBS01.DBF';
Database altered.
SYS@DEMO102> alter database rename file 'E:\ORACLE\ORADATA\DEMO102C\SYSTEM\SYSTEM01.DBF' to 'E:\ORACLE\ORADATA\demo102\SYSTEM\SYSTEM01.DBF';
Database altered.
SYS@DEMO102> alter database rename file 'E:\ORACLE\ORADATA\DEMO102C\EXAMPLE01.DBF' to 'E:\ORACLE\ORADATA\demo102\EXAMPLE01.DBF';
Database altered.
SYS@DEMO102> alter database rename file 'E:\ORACLE\ORADATA\DEMO102C\TBS102_1.DBF' to 'E:\ORACLE\ORADATA\demo102\TBS102_1.DBF';
Database altered.
SYS@DEMO102> alter database rename file 'E:\ORACLE\ORADATA\DEMO102C\TBS102_2.DBF' to 'E:\ORACLE\ORADATA\demo102\TBS102_2.DBF';
Database altered.
SYS@DEMO102> alter database rename file 'E:\ORACLE\ORADATA\DEMO102C\REDO01.LOG' to 'E:\ORACLE\ORADATA\demo102\REDO01.LOG';
Database altered.
SYS@DEMO102> alter database rename file 'E:\ORACLE\ORADATA\DEMO102C\REDO02.LOG' to 'E:\ORACLE\ORADATA\demo102\REDO02.LOG';
Database altered.
SYS@DEMO102> alter database rename file 'E:\ORACLE\ORADATA\DEMO102C\REDO03.LOG' to 'E:\ORACLE\ORADATA\demo102\REDO03.LOG';
Database altered.
SYS@DEMO102> alter database rename file 'E:\ORACLE\ORADATA\DEMO102C\TEMP01.DBF' to 'E:\ORACLE\ORADATA\demo102\TEMP01.DBF';
Database altered.
SYS@DEMO102> alter database open;
Database altered.
SYS@DEMO102> create spfile from pfile='E:\oracle\admin\DEMO102\pfile\pfile102.ora';
File created.
SYS@DEMO102> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SYS@DEMO102> startup
ORACLE instance started.
Total System Global Area 272629760 bytes
Fixed Size 1288940 bytes
Variable Size 163579156 bytes
Database Buffers 100663296 bytes
Redo Buffers 7098368 bytes
Database mounted.
Database opened.
SYS@DEMO102> select file_name from dba_data_files
2 union
3 select member from v$logfile
4 union
5 select file_name from dba_temp_files
6 union
7 select name from v$controlfile;
FILE_NAME
E:\ORACLE\ORADATA\DEMO102\CONTROL01.CTL
E:\ORACLE\ORADATA\DEMO102\CONTROL02.CTL
E:\ORACLE\ORADATA\DEMO102\CONTROL03.CTL
E:\ORACLE\ORADATA\DEMO102\EXAMPLE01.DBF
E:\ORACLE\ORADATA\DEMO102\REDO01.LOG
E:\ORACLE\ORADATA\DEMO102\REDO02.LOG
E:\ORACLE\ORADATA\DEMO102\REDO03.LOG
E:\ORACLE\ORADATA\DEMO102\SYSAUX01.DBF
E:\ORACLE\ORADATA\DEMO102\SYSTEM\SYSTEM01.DBF
E:\ORACLE\ORADATA\DEMO102\TBS102_1.DBF
E:\ORACLE\ORADATA\DEMO102\TBS102_2.DBF
E:\ORACLE\ORADATA\DEMO102\TEMP01.DBF
E:\ORACLE\ORADATA\DEMO102\UNDOTBS01.DBF
E:\ORACLE\ORADATA\DEMO102\USERS01.DBF
14 rows selected.
SYS@DEMO102> Nicolas.

In organizer i select photo and click edit with PE, PE opens but the photo is not opened

in organizer i select photo and click edit with PE, PE opens but the photo is not opened

In PSE 11 or 12 simply select a thumbnail and click the editor button at the bottom of Organizer.
In older versions click:
Fix >> Full Photo Edit

When I'm in LR and click edit in PS CS6, I lose my edits and presets once in PS. How do I fix this?

When I'm in LR and click edit in PS CS6, I lose my edits and presets once in PS. How do I fix this?

OK, as you noted, the problem began when you upgraded to LR6, but you did not upgrade PS. LR6 needs Photoshop to have Camera Raw 9.0 for full compatibility. But, there is a workaround. Normally, LR passes the raw file and the adjustment metadata to PS for rendering using PS's camera raw, but LR can render the file as well. Here are the steps to take:
1. Edit > Preferences > General. Under "Prompts," choose "Reset all warning dialogs."
2. Now choose "Edit in Photoshop." You should see something similar to this warning dialog; choose "Render using Lightroom."
In this way, all the adjustments you made in LR will be rendered and the already rendered file will be passed to Photoshop.
Note the checkbox "Don't show again." You may have checked this once before, which is why you may not see the warning dialog. The reset in step 1 brings this warning back in case you've dismissed it.
Hope that helps!
Mike

Double-click/Drag-&-drop Photoshop files opens application but not file or I get a message saying that some files in Application Support are missing and I have to reinstall. (Photoshop CS/CS2/CS3)

This is most commonly due to installing Photoshop CS/CS2 before doing an archive and install of Mac OS10.3 or OS10.4. One solution is to reinstall Photoshop 7/CS/CS3 after you have installed Mac OS10.3 or OS 10.4. If you have Photoshop 7 and 8(CS), the easiest way to reinstall Photoshop (without disturbing the original installation) is to install to your desktop. After the install is done just trash the Photoshop folder on the desktop. Note: This will only work with Photoshop 7 and 8(CS) but not with 9 (CS2). Photoshop CS2 you must delete the Photoshop CS2 folder. If you have any 3rd party Plugins or presets remove them from the folder before deleting. Just placing the folder in the trash will not work it must be deleted. After reinstalling CS2 you can now put all 3rd party Plugins and presets back in the new folder. --------------------------- Another solution courtesy Anne Shelbourne Open your Previous System folder. Find "Adobe Unit Types". Copy it into: <Your current system Hard Drive>/Library/ScriptingAdditions/ Then reboot your Mac. --------------------------- However, if you happen to be running a non-English version, like Photoshop CS CE or Photoshop CS ME, it appears the missing file does not get installed. You would need to install and delete the international English version first.

The problem you got into is a known problem after updating to Tiger. It is a small 4K file that gets trashed with the update. It is called the Adobe Unit Types. Both Photoshop and Photoshop Elements need this file to function.
One way to get it back is to reinstall Photoshop, the other is to add this file again.
You can get the file from here http://www.dd.se/Tips/bildbehandling/downloads/AdobeUnitTypes.zip
It is only 3,7 KB big.
You put the file you download here:
[hard disk] /Library/ScriptingAdditions. If you don't have a Scripting Additions folder, you create it.
As you trashed Photoshop, you need to completely deinstall it to be able to reinstall it.

When I make a video with the camera ipad mini seen but not heard I can do ?

when I make a video with the camera ipad mini seen but not heard I can do ?

Yeah, of course you can. All you do is, open PhotoBooth, record your video and then, once you have stopped the video recording just drag the movie out of the bottom of PhotoBooth onto the desktop. It is in .mov format so you can then add it to iMovie for further editing or just upload it to youTube as it is.
Easy as pie!

I bought a second hand G4 iBook with iLife 09 on it. I have copied iLife to my new Macbook Pro. The applications would not open, so I did a software update and update all three applications, but they will still not open. Can anyone help?

I bought a second hand G4 iBook with iLife 09 on it. I have copied iLife to my new Macbook Pro. The applications would not open, so I did a software update and update all three applications, but they will still not open. Can anyone help?

The seller should have given you the original disk so that you can reinstall as needed. But it likely was a single-user license (which really means single computer) so you can only have a copy on one computer at a time. If the seller didn't give you the disk he is probably still using the software on his new Mac. Your best option to get any of the iWork apps to use in OS X 10.6.6 or later is through the Mac App Store. You can then install them on any Mac you have that has access to the Mac App Store using your Apple ID.

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

The Java plugin has created a time unfriendly issue with my e-mail account, I can not open or send any e-mail without using this plugin, how can I eliminate this problem without dropping m. firefox?

A few days ago I tried to e-mail a friend, when I started A box came up and it required me to add a plugin..Java. I contacted my e-mail courier and microsoft, they told me that is was a plugin from Mozilla Firefox. Since then I must go through Java to send or open an e-mail... this is NOT to my satisfaction, it takes too long for all of this to open and if it is not cleared , I am dropping Mozilla and going elsewhere. Why has this occurred? Is this a result of the last update? If so can I delete the last update and continue on the other version?
== This happened ==
Every time Firefox opened
== last week

Sorry, I have no idea what you mean by '''"The Java plugin has created a time unfriendly issue with my e-mail account, I can not open or send any e-mail without using this plugin,"'''.
If you think your problem is caused by the Java plugin, you should visit the Java support forum for assistance.
http://forum.java.sun.com/index.jspa
If you could explain what you mean by '''"time unfriendly''' issue with my e-mail account", maybe we'll be able to help you solve that issue.
It might be helpful for us if we knew exactly which web-mail provider you are using. It seems strange to me that viewing or sending web-mail would actually "need" Java for operation, its more likely that some other item on the web page needs Java to run some advertising or other garbage that isn't a necessary part of the web-mail functionality you want to use.

Clicking on a link in Mac Mail Firefox does not open in front of Mail--it used too. The link does open but I have to click on the Firefox icon in the Tray to bring it to full screen. Can you please help

clicking on a link in Mac Mail Firefox does not open in front of Mail--it used too. The link does open but I have toclick on the Firefox icon in the Tray to bring it to full screen. Can you please help.

Thanks Jason, I had the same problem and did exactly the steps above. Problem solved! You rock! :)

How can I have a Pages document that is shared with me under my Pages section and not open it with the link?

How can I have a Pages document that is shared with me under my Pages section and not open it with the link?

Try this.
Open the document and select and copy a few pages, say ten pages.
Open a new blank document and paste the pages you copied into that.
Save it with a new name.
Work on those new pages to see if the problem has disappeared.
If this helps, continue breaking up the large file in to smaller chunks and working on them
You can of course later reverse the process and merge the files into one new one.
This suggestion is based on my experiences with large Word files. Breaking it up in to smaller chunks does two things. First, if there is any corruption in the old file, the new copies might escape that. Second, the Mac is faster handling the smaller chunks.

Issue with Illustrator CS6 - can't get it to run

Since a couple of weeks ago, I have an issue with Illustrator CS6 - can't get it to run When starting the application I get the following error:
"The procedure entry point ?AcquireVarient@ImageInterface@drawbot@dvaui@@QBE?BV?$intrusive_ptr@UImageInterface@drawb ot@dvaui@@@boost@@V?$rational@J@5@@Z could not be located in the dynamic link library D:\Program Files\Contents\Windows\Illustrator.exe."
I'm running it on Windows 8 (x64). I have multiple other Adobe applications installed, which are running fine. I've tried solving the issue with reinstalling Illustrator - multiple times. My GPU driver is updated to the latest version.

I have this issue as well on my Mac and called tech support 4 times and they can't fix it. Adobe has really gone down hill in a short amount of time!!
Only thing that worked (as a temporary fix) is to create a new user and toggle back and forth between two users which is very annoying. Adobe has tried uninstalling, reinstalling, taking over my computer remotely, trashing plugins, verifying permissions but the fact remains that we bought CS6 four weeks ago and Illustrator doesn't work.
I'm going on Facebook to let others know.....don't buy Adobe, it doesn't work and they don't know how to fix.

My illustrator CS6 crashes when i try to open an AI file with RGB color mode

My illustrator CS6 crashes when i try to open an AI file with RGB color mode. I worked on this file yesterday and changed it to RGB mode. Today i tried to open the file again but illustrator won't open it and crashes. It does work when i want to open a file with CMYK color mode.
Anyone know how to fix this ?

Have you tried trashing the prefs?

Tthe flood filter is in my plugins folder along with the other plugins I have, but not in cc 2014. It's also in Adobe bridge associated with cc 2014, but not in cc 2014 Photoshop. i hope you get this because i forwarded your info to HCS and now I'm all m

the flood filter is in my plugins folder along with the other plugins I have, but not in cc 2014. It's also in Adobe bridge associated with cc 2014, but not in cc 2014 Photoshop. i hope you get this because i forwarded your info to HCS and now I'm all mixed up as to this gets forward.

Unfortunately, you are not addressing Adobe here in the user forums.
However, there are many highly experienced volunteer users here willing to help.
Can you please clarify: are you saying that your Flood filter (whatever that is) is in your Bridge folder but not in Photoshop?
UPDATE: I Googled your Flood Filter and discovered it's not an Adobe filter at all. Have you contacted its manufacturer, Flaming Pear? What do they say?

EPS placed in InDesign CC, clicking "Edit with Illustrator CS6" will launch application but not open document.

Similar Messages

Maybe you are looking for