EPS vecotor looks awful in Premiere CC. Why?

The same file worked and displayed well in Premiere CS6. I've opened the project with Premiere CC and the vector EPS appeared rasterized and low res. It displays this way on preview of the video and after exporting the movie. Why is this happening and how can it be fixed?

Same "issue" here.
I loved the way how CS6 handeled the EPS files, because i was able to scale them how ever it need without having a loss of quality.
why is this feature gone? it was one of the functions why we choosed PremierePro!
is it a bug or is the EPS-vector support history?
cheers, dennis

Similar Messages

  • HD video from iMovie looks awful when converted in iDVD

    Shot some 16:9 HD video and made a project in iMovie, then "shared" it to iDVD to create a standard-definition DVD.
    Unfortunately, the resulting DVD looks awful - far worse than a commercial standard-def DVD.  The image is very pixelated in a manner that seems worse than standard-def resolution limitations.  I processed it using the iDVD "professional" encoding.
    Why does this look so bad, and by "bad" I mean worse than other standard-def DVDs?  Is there a way to optimize the stepping down from HD between iMovie and iDVD?
    Thanks!

    Hi
    There are some observations to this
    • I do not use - Share to iDVD - in any version of iMovie
    • iM'08 or 09 or 11 - I Share to Media Browser - and in iDVD get the movie from here - result is better
    BUT - iM'08 or 09 or 11 - are not tools to use if You want a Good DVD
    • iMovie up to HD6 or FinalCut any version are ! They keep all lines that builds up the picture - the new ones
    discard every second line resulting in a 50% loss of sharpness
    Especially if recorded im SD-video format on miniDV tape (interlaced) then choise of video editing application is very important.
    Yours Bengt W

  • Epson R1900 prints look awful

    I'm printing from a MacBook Pro. 2008
    Printed images on my high end Epson R1900 look awful.
    Printed out of photoshop they don't resemble what's on screen in the slightest.
    Printed out of indesign they are much better but still random.
    Every program prints differently.
    Snapseed prints better results than most.
    Why the inconsistency? I'm wasting so much paper and ink trying to get something that should be simple right.
    Any ideas?
    thanks
    matt

    There were a lot of reports of "double profiling" with Epson printers when Photoshop CS5 was first released.  I believe many people were seeing magenta-looking prints at that time.
    Unfortunately, I don't think there was ever a resolution or even a good workaround...  I recall at least one person bought a new printer to be able to continue to work.
    Of course, double check to see whether Epson has released any updated printer drivers.
    As I don't have an Epson myself, I can only suggest that you'll want to experiment with your settings to see if you can find a way to disable color management in the printer driver, so that only Photoshop does it - or disable color-management in Photoshop so that only the printer driver will do it.
    -Noel

  • Input & output looks awful...

    Purchased the Photoshop Elements/Premiere Elements bundle last night, but I'm having an issue on the Premiere side.
    Video clips (AVI, MPG, MOV, even VOB) that normally look great when played inside Windows Media Player or QuickTime look awful when brought into Premiere Elements for editing, and look just as bad however the file is output, whether to the PC or to DVD. The video is of much lower visible quality and is quite blocky.
    Is there a setting that needs to be enabled that I'm missing?

    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
    Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
    - click the embedded picture in Harm's message to enlarge to reading size
    - you need AT LEAST 2 drives for video editing, 3 is better
    - some HD formats work better with (require) RAID
    Read Hunt on Partitions http://forums.adobe.com/thread/650708?tstart=0
    A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0
    Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549?tstart=0
    Tools to Convert to DV-AVI http://forums.adobe.com/thread/415317?tstart=0
    Convert http://premierepro.wikia.com/wiki/FAQ:How_do_I_convert_my_files%3F
    Convert your files to DV-AVI Type II with 48KHz 16-bit Audio
    I have NOT used the products below, I only forward due to other mentions
    $99 http://www.corel.com/servlet/Satellite/us/en/Product/1175714228541#tabview=tab0
    $99 http://www.womble.com/products/mvw.html
    $90 http://www.magix.com/us/movie-edit-pro/ plus $5 Ship
    $80 http://www.nchsoftware.com/prism/index.html
    $75 http://www.videoredo.com/en/index.htm
    $70 http://www.nchsoftware.com/prism/index.html Converter
    $40 http://www.daniusoft.com/dvd-ripper.html#135
    $40 http://www.deskshare.com/dmc.aspx Digital Media Converter
    $20 http://www.topsoftwareol.com/product/Video/Video_Converter_Standard.html
    $00 http://www.dvddecrypter.org.uk/ or http://www.mrbass.org/dvdrip/
    $00 http://www.squared5.com/ MPEG Streamclip Converter
    $00 http://www.erightsoft.com/SUPER.html Multi-Converter <-- supposed to be very good
    $00 http://www.virtualdub.org/ Mpeg to AVI Converter

  • When publishing to a folder page looks awful once uploaded. Can anyone help

    Hi,
    I've read through at least 30 pages on this forum and seem to be unable to find something to help me remedy my problem.
    I made a really simple site in iWEB. When I publish to a folder and click the "visit this site now" button, everything looks perfect. However, once I upload the site, using Fetch, the site looks awful. The Arial font is replaced by something else. The "made on a mac" image disappears. The navbar is non existent, and none of my other pages display properly (when I manually enter there addresses).
    I read a previous post about changing my Fetch settings so that data uploads in binary (raw) form and did that. I tried changing text-encoding in my browser to UTF-8, but that did not help either.
    I've cleared the folder on my home computer a number of times and tried republishing and re-uploading and that does not help. I've tried viewing the page in Safari, Mozilla, and Explorer, and it looks terrible in all 3. The site is:
    http://web.syr.edu/~ljames
    If someone can help me I'd greatly appreciate it. If you need any further info from me, please let me know and I'll do what I can to assist. Thanks.

    You have changed the permissions (or they are incorrect) on your home_files directory. I get a forbidden message when trying to access that directory. The sylesheet (css) and other files there dictate how the home page is diplayed. Make sure that all the permissions on the directories for your site are set correctly.
    Todd

  • Export in pdf: looks awful in Acrobat Reader

    Hello
    I wanna do a simple 1024*768 pdf (from sources i use for iPad app made in Digital Publishing Suite)
    WHen iI export in .pdf, there's no way (well, for me, so far) to get the pdf have the right size/dpi ratio than in my original innn document
    my document is made for web,, my images as well (all 1024*768, full page)
    when i open the pdf (i tried all possibilites in choices i'm given) it looks awful
    the acrobat reader says it's 100%, but 100% of what ?
    certainly not the100% from my original documlent, it opens way much bigger.
    I't only looks good when it's on 66,7% on acrobat reader
    Anyone got a clue ?
    thanx !

    Peter Spier wrote:
    You've set up at 1024 x 768 px doc size? Your PDF should also then have a 1024 x 768 size (it might read 14.22 x 10.66 inches in Acrobat since as far as ID is concerned, pixels = points). Have you scaled the images in ID?
    well, when I export from indesign to pdf , i got the choice between "interactive" or "print", I chose interactive, and there's no way to set up anything else appart from   pages (all/specify) etc.etc.

  • My Dell U2412M monitor looks awful on OS X

    I bought my first Mac (Mini 2014) and attached to my Dell U2412M external monitor and the graphics looks awful, all blurry and pixelated.
    For the avoidance of any doubt:
    1) Mini is connected to minitor via miniDP to DP cable
    2) Color is correctly set to RGB
    3) Resolution is on the right setting
    4) Pictures look fine, the problem is just with the font rendering, in any application
    5) Have tried turning LCD font smoothing on and off but does not really make a big difference
    Any other setting I can try? Is Mac really this bad at handling fonts? I use the same monitor on a windows laptop and font is crystal clear. It is like looking at a 1024x768 screen while mine is a pretty decent 1920x1200.
    thanks

    Did you resolve issue?

  • DVD looks awful on Sony Bravia 26" LCD

    I've created many DVDs and always check them on a CRT TV. They always look great (given that they are shot on DV). However, I have purchased a Sony Bravia, and when I viewed the DVD it looked awful: smearing, blocky, traily, etc.
    Given that most of my clients have LCDs or plasmas I'm worried that they will see a similar picture.
    Does anyone have any tips for getting better results (apart from throwing away the Bravia)?
    Thanks
    I edit in FCP, uprezed the edit to 8 bit 4:2:2 uncompressed, encoded to mpeg2 with Bitvice, then used DVDSPro to create the DVD

    Those rates are the default bitVice settings and a good place to usually start. As the bit rate too high issue take a look at this link
    [Bit Rate Too High|http://dvdstepbystep.com/faqs_3.php]
    The way you describe the problem it sounds like something where Compression markers could help - basically it flags portions of the video which you want the encoder to really make sure it gets right. Press the "M" key over the timeline twice (first one sets the marker second brings up the dialog) where the issue is and set it to Compression Marker in the dialog.
    If these issues are right before/after a cut sometimes changing the cut by a couple of frames can help or change the length of a dissolve by a couple of frames (I just had one thing where I had the ghosting and the rest and that took care of the issues, the problem areas were on the cuts/dissolves.)
    Try sending the section with the problem from Final Cut directly to Compressor and also keep the timeline at DV to see if that helps (do not change codecs) in case there is something happening when you are switching codecs. That can also be a part of the issue.

  • Powerpoint presentation created on Mac looks awful on PC - I'M DESPERATE!

    I am creating a Powerpoint presentation on my G-5 that will be shown tomorrow, probably on a PC.
    I burned a disc tonight as a test and viewed it on a PC and all the fonts look awful.
    It has coverted them to something else entirely and in the process totally messed up alignment, etc.
    I may have no control over what this is shown on, so I'm trying to figure out if there is a way to embed fonts into a Powerpoint, so that whatever it is shown on, it will look right.
    Any help would be greatly appreciated.
    thanks.
    J.

    If you want to use Powerpoint to display the presentation I don't think you have any choice but to use Windows fonts that you would expect to find on a typical PC.
    Couldn't you print the presentation as a PDF and use Adobe Reader to display the slides? A PDF created on a Mac should look the same on a PC because fonts are embedded in the PDF.

  • Help! DVD copies looking awful!!

    Hi,
    The DVDs I'm burning look awful. I am exporting a project from FCP to a QT movie. The QT looks fine on the computer when I play it back full screen but when I burn it to a DVD it looks horrible both on the computer and from a DVD player. This is a weird turn of events since I have downloaded and made files from the same project many times and did not have this problem. The resolution is so jagged and the titles look horrible.
    I am not using any compression when making the QT. I have used current settings - which are HDV 1280 x 720p and, when that looked bad, I tried using pro res 422 720p. I have changed the settings in idvd 6 to Best Performance and have also tried the Best Quality Setting.
    I've been searching this forum for hours for answers about my problem. I have tried every fix I can find to no avail. I'm desperate now since I need to get a dvd in the mail today in order to make a festival deadline.
    Please help!
    cathy c.

    #42 - Quick and dirty way to author a DVD
    Shane's Stock Answer #42 - David Roth Weiss' Secret Quick and Dirty Way to Author a DVD:
    The absolute simplest way to make a DVD using FCP and DVDSP is as follows:
    1. Export a QT movie, either a reference file or self contained using current settings.
    2. Open DVDSP, select the "graphical" tab and you will see two little monitors, one blue, one green.
    3. Select the left blue one and hit delete.
    4. Now, select the green one, right click on it amd select the top option "first play".
    5. Now drag your QT from the broswer and drop it on top of the green monitor.
    6. Now, for a DVD from an HD source, look to the right side and select the "general tab" in the track editor, and see the Display Mode, and select "16:9 pan-scan."
    7. Hit the little black and yellow burn icon at the top of the page and put a a DVD in when prompted. DVDSP will encode and burn your new DVD.
    THATS ALL!!!
    NOW...if you want a GOOD LOOKING DVD, instead of taking your REF movie into DVD SP, instead take it into Compressor and choose the BEST QUALITY ENCODE (2 pass VBR) that matches your show timing. Then take THAT result into DVD SP and follow the rest of the steps. Except you can choose "16:9 LETTERBOX" instead of PAN & SCAN if you want to see the entire image.
    Shane

  • Text looks awful?

    Hi all,
    Using FCP 10.0.6 and when importing a video that has text on it, it looks awful. The text 'shakes' and doesn't look right at all. I use avidemux to change the look of a video, and FCP to put it in HD and sharpen it. However, whenever I put the video into FCP it always has problems with the video imported that aren't on the actual file. An example of what this looks like would be:
    http://www.youtube.com/watch?v=LHJeWBmVR90&list=UUkxHI9k2Ir3epaJLdcttlbg&index=5
    Can be seen at 1:45 in the video. Any way to remove this, or stop it from happening? My avidemux output settings are:
    MPEG-4 AVC
    Single Pass 10000kbit/s
    MP3 (lame)
    .MP4
    Any help greatly appreciated,
    Damien.

    dam2040 wrote:
    …  when importing a video …  The text 'shakes' .  I use avidemux to change the look of a video, and FCP to put it in HD and sharpen it. …
    wotwotwot?
    you have a low-quality, highly compressed source file and scales it to 'HDef'?
    that just blows-up pixel-mud, doesn't 'create quality'.
    by contrary: so-called scaling-effects could degrade quality, in your example, the font creates 'sub pixel'.
    probably, you're using the wrong codecs to swap btw. the two tools.
    use FCPX only to add your titles and 'changing the look'.
    ... and be nice to ©opyrights …

  • Photoshop Print Settings - what to use - photos look awful.

    I don't know what I did but when I go to print a photo the Photoshop Print Settings pop up.  Which is better - Printer manages color or Photoshop?  I don't know how to change my Printer Profile.  I have search HP for over 3 hours.  I have an Officejet Pro 8600 and can't seem to find anywhere to change it.  The photoshop print settings the Printer Profile is :sRGB IEC61966-2.1.  Under Color Management - Please use Adobe Color Printer Utility if you need to print with No Color Management - also didn't work.  The more I do the worse it gets.  The prints for instance arms showed dark specks.  Look awful. I have an iMac and am using the iMac settings in my color profile in preferences.  Any ideas?

    gener7 wrote:
    I was never too sure, but when it comes to consumer inkjets, it's best to let the printer software worry about it.
    Gene
    I'll go along with that.  Use the printer manufacture's software and paper, and you at least have a chance of things working out.  I went through years of hassle with various Epson printers, even spending serious money having a custom profile made, but the results were never great, and the Internet showed I was not alone.  Since switching to Canon with a Pixma 9000Pro, and using Canon's EasyPhotoPrintPro software, it just works first time every time, so I can thankfully circumvent all that printer profile mylarky.  Incidentally, I do use other paper, principally Ilford Galerie Smooth Pearl, which works as well as Canon paper.  But I almost never enter competitions nowadays, so have not used the photo printer in over a year.  I bet it cost $25 in ink just turning the thing on, and I can get a professionally printed A3 for that money, and I don't have a third of my desktop taken up by a rarely used printer.

  • HT201272 In Itunes on my Ipad and looking in the purchased area, why can't I see all the movies I have purchased, only some??

    In itunes on my Ipad3 and looking in the purchased area, why can't I see all of the movies I have purchased. Only a few appear????

    Not all film studios have so far agreed to make their films available for re-download, so their films won't show - also if a film is no longer available in the store then it won't appear

  • Motion import to FCP looks awful

    I have a Motion2 project I created that looks perfect in Motion. When I import into FCP 5, first I have to render it (is this normal?), and it looks awful afterward - the text looks very jagged and aliased, and the layered "background" animation is completely lost, leaving only black (see below).
    The project settings on both are NTSC/DV at 720x480 and 29.97.
    I'm using the animated curves layers from one of the templates in Motion2 as my background layer, but I wanted them darker, so I doubled them up and played with the blend modes. This is the animated "background" that's not showing up in FCP.
    Man, I was riding high after creating a lower third for the same project in Motion that turned out beautiful (thanks to some helpful advice on this forum . When I did the import for the lower third piece into the very same FCP project it looks excellent! The only difference I can think of is that it had the video clip brought in from FCP that I animated over, whereas this project is a bumper that is all created in Motion.
    Help - any thoughts???
    All the best,
    ~Chris

    OK, I'm closer to figuring it out and just hoping someone can help me take it to the finish line
    The only difference between the two Motion files is the lower third was created over video sent from FCP. Since this Motion project (the one I'm having a problem with) is a bumper on its own in the FCP Timeline, I thought maybe there's a problem with the "black" FCP creates in any spaces in the timeline, and this is perhaps adding black to the background of the Motion file import...
    Sure enough, I built an NTSC black b.g. still in Photoshop and imported it into Motion. Putting this black NTSC b.g. on the bottom layer recreated the EXACT problem I'm having in FCP! On this NTSC b.g. layer, I can take down the opacity all the way, or choose "stencil alpha" from the blend modes to get the right look, but either way, when I import it back into FCP I still get the same problem.
    So, I tried importing the black NTSC still into FCP, sending it to Motion, adding the Motion file to the top, and still get the same problem upon reimporting...I'm out of ideas at the moment...
    Can anyone think of a workaround? Patrick?
    Regards,
    ~Chris

  • TS1292 Hi, can you please take a look at my account and why its asking me to contact support. I have my billing address correct and everything but for some reason its not letting me to authorize my transaction

    Hi, can you please take a look at my account and why its asking me to contact support. I have my billing address correct and everything but for some reason its not letting me to authorize my transaction

    We are all fellow users here and have no way of accessing your account information; iTunes Store employees do not participate in these forums. You will need to do what it says, contact iTunes Support. Go here:
    http://www.apple.com/emea/support/itunes/contact.html
    to contact the iTunes Store.
    Regards.

Maybe you are looking for