Epson 2200 Printer disappeared from list and won't come back

My Epson 2200 printer has disappeared from my printer list, and I cannot find it again in the Firewire list. I have reinstalled the latest printer driver, I have tested plugging in someone else's Epson 2200 - and it shows up no problem. My printer won't even turn on when it is connected to my mac. Why would this happen all of a sudden?
iMac g5 power pc   Mac OS X (10.4.9)  

Welcome to Discussions - Have you tried plugging your printer into another computer? It sounds as if the printer has problems. Have you tried unplugging it, then restarting and plugging it in? Does the USB port work with other peripherals? Try posting to the Epson SUPPORT page and see if anyone there has had the same experience.
Let us know how you make out,
Miriam

Similar Messages

  • HT1339 After I disconnect from my PC, my iPod nano shuts off and won't come back on?  How do I fix this?

    When I disconnect from my PC, my nano shuts off and won't come back on.  I have tried holding down both the On/Off and the Home buttons -- but nothing...

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • After upgrading to mavericks my mac shut off and won't come back on

    I upgraded to Mavericks and my 2013 macbook pro shut off and won't come back on.  When I push the start button I can hear the chime and then my sleep light blinks really fast and then shuts off completely.  All I get is a white screen with the loading circle just going around and around.  I tried resetting the pram but that didn't work.  Any ideas?

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • All account have all gone off line and won't come back.

    my aol, g-mail, and moblie me accounts have all gone off line and won't come back. It started with AOL the spining wheel first and then the triange. I can get the mail with safari with no problem. any ideas?

    From the Mac Mail menu bar click Mailbox > Take All Accounts Online

  • Why does my iphone 3gs screen goes black after reaching another party and won't come back on to press end the call

    why does my iphone 3gs screen goes black after reaching another party and won't come back on to end the call

    hi smalley3,
    Welcome to the Forums.
    The flickering issue maybe due to a bad LCD cable or in some cases, a faulty GPU (the GPU is integrated to the CPU, and the CPU is soldered to the motherboard).
    If there's still no image on the screen even after connecting an external display then you likely have a bad GPU.
    In this case, I recommend you contact support for service (and also to see if there's a consideration that can be done on the warranty repair).
    Support phone list
    Regards
     

  • Screen goes to sleep and won't come back on - how to fix?

    My 2009 MacBook screen goes to sleep and won't come back on. It just stays black while the computer is still running. This just started happening one day for no apparent reason. Anyway to reconcile?

    When you post for help, please state which OS X is installed.
    If you aren't sure, click About this Mac from your Apple menu 
    Troubleshooting advice can depend on that information.

  • My Phone Just Shuts Off and won't come back on unless hooked to a power source.  I've got all the updates and all apps are closed out.

    My Phone Just Shuts Off and won't come back on unless hooked to a power source.  I've got all the updates and all apps are closed out.

    Most likely a bad battery.

  • My ipad went dark during a game and won't come back on even when hooked to macbook or charger, what do I try?

    My Ipad went dark while playing a game and won't come back up even when hooked to macbook pro or the charger, what do I do?

    try to restart/reset the iPad by pressing and holding both the Power/Sleep button (top edge) and Home Button for about 10 seconds until the apple logo is displayed.

  • Whilst using my laptop it powered off unexpectedly and won't come back on. Ive tried connecting it to the powere adaptor but it's not charging Nd is still off. Battery was fully charged before it went off

    Whilst using my laptop it powered off unexpectedly and won't come back on. Ive tried connecting it to the powere adaptor but it's not charging Nd is still off. Battery was fully charged before it went off. Please what can I do?

    Try resetting the  SMC http://support.apple.com/kb/ht3964
    Try resetting NVRAM/PRAM http://support.apple.com/kb/ht1379

  • 15-r018dx display turns off and won't come back on

    I have a HP 15-R018DX laptop that I just bought and when I close the display, it turns the display off and won't come back on when I flip it open again.  I've already changed the Power Options so that the "what happens when you close the display" options are all set to "nothing happens".  Despite that, each time I close the display and open it again, the display goes blank and stays blank, though the status LEDs on the left side tell me that the compuer is still on and not hibernated, etc.
    The only way to return the display to normal is to push the power button (I have it set to hibernate when I push the power button) and then turn it back on again after it hibernates.  Then, the display is illuminated again like normal.  No amount of touching the touchpad, it's buttons, or keyboard keys will return the display to normal once it turns off after the lid is closed and re-opened.  Any ideas on what's happening and how to make the display turn on when opening the display again? Thanks in advance!

    I was also facing the same probs..
    bt when i reinstalled OS, nw alomost every part s ok except the brightness part..
    The option to adjust brightness seems unavailable..

  • My iPhone 4 just shut off for no reason and won't come back on?

    My iPhone 4 just shut off for no reason and won't turn back on.. ??

    Hi there 203nancyc,
    You may find the troubleshooting steps in the article below helpful.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Issue not resolved
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    -Griff W. 

  • MacBook Pro 2012. Replaced hard drive yesterday by apple. Went home working and now it turns off and won't come back on till I plug it in... Help!

    Have had a ton of issues with my Mac. Went to the apple store in march and they said my processor could be going bad and they basically did nothing. Yesterday I was using my computer put it to sleep. 10 minutes later I opened it up and it completely crashed. Drove 2 hours to get to apple because I am away at school and need my computer for finals. They replaced my hard drive and it was working perfectly fine till today. Now it turns on and works and then shuts off and it won't come back on till I plug it in. It's completely charged and I need it for my classes. I have apple care but I can't keep driving back to apple every day. I have a apple appointment tomorrow but this is ridiculous. Has anyone had any of these issues? What's it going to take for them to replace my computer I can't even live a day without it right now. And by the way. I could not even get any of my data off my old hard drive. So basically nothing is on this computer right now.

    Kak4k8 wrote:
    I have apple care but I can't keep driving back to apple every day. I have a apple appointment tomorrow but this is ridiculous. What's it going to take for them to replace my computer I can't even live a day without it right now.
    Let them know how this is inconveniencing you.  For a replacement, I believe Apples general rule of thumb is if it comes in for the 3rd time for the same issue they will replace it, but it may vary by store.  It cant hurt to ask for a replacement.

  • My iPhone 4s randomly shut off last night and won't come back on. what do i do?

    My iPhone 4s randomly turned off last night and it won't come back on.  It shut off with plenty of battery life last night, but just in case, I've had it plugged into the charger all night. Still nothing has happened. Any advice?

    hold down the home/sleep button together until you see the apple logo and then release.

  • I was updating my phone and it turned off and won't come back on

    I was trying to update my iphone 5s yesterday and it shut off and now it won't come back on. I've had it plugged in all night and have tried holding the home and sleep button but nothing works

    Try holding the home and sleep buttons for as long as a minute.  Try it a few times.
    Are you sure it's plugged into a good outlet using a good charger and cable?
    Else, take it in to Apple and let them look at it... you have a 1 year warranty.

  • IPhone 3G turns off and won't come back on unless plugged in

    My iPhone 3G shut off and wouldn't come back on unless plugged into the charger after taking it off the charger it works for about 30 minutes then shuts off again and I have to plug it back in to get it to come back on. Anyone know what the problem could be?

    My iPhone 3G shut off and wouldn't come back on unless plugged into the charger after taking it off the charger it works for about 30 minutes then shuts off again and I have to plug it back in to get it to come back on. Anyone know what the problem could be?

Maybe you are looking for

  • Back Ground Job Scheduling SM36

        Hello Experts I have Created Variants for Reports and trying to schedule a back ground job based on the Variants. for 1 Report KOK5 The Program is SAPMKAUF of Type M. I get a Message i cant schedule a Job for Program Type  Other Than 1 or J. how

  • 1/2 of phone not working. I think.

    I noticed this when i bought the phone, but didn't think anything of it until now (its been two weeks). For some reason, the left speaker on the bottom of the iPhone is the only one that works. Is this intentional or is the right one (if it exists) s

  • Add Picture to a Module pool screen

    Any anyone know how to load a picture,im module pool I have already uploaded a BMP file in se78. After that do anyone know how to upload the picture in the Module pool screen.

  • BI Pattern Wizard

    Dear All, I tried playing around with the Pattern Wizard in WAD on 2004s. The problem there is, I can not see the reusable web items and the ICP template is not being displayed properly. I tried searching for the sap_bw_pattern_objects role and was n

  • Extending ImageView.

    I'm trying to extend the ImageView node to provide a little bit better control over picking behavior. I've created a new TileImage class which extends the ImageView class, and I want to override the contains method. If I just recreate this method and