Epson 2880, not printing

Updated drives to latest one, and since then printer stopped working, tried to restart all, but still same issue. Have a red mark next to printer icon in dock and no explanation about problem.
Cheers guys.

Cheers Armondo,
Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Might try Printer Setup Repair 5.1...
http://www.fixamac.net/software/index.html

Similar Messages

Indesign CS3 & Epson r2400 not printing tabloid paper

Indesign CS3 & Epson r2400 not printing tabloid paper. MAC OS 10.5.6. Have tried all configurations of page set up 11 x17 and 8.5 x 11 spreads, custom page sizes and default paper set up. The print comes out cut off. Epson says it's an Indd problem. Very inconvenient. Got any ideas?

I'm having the same problem with IDCS3 5.0.4 and an Epson Stylus PRO 3800 on Mac OS X 10.5.6 with version 6.11 of the Epson driver. I have a 17x17 document in InDesign that I am trying to print on 17x22 paper. The paper spools a little less than half-way down and the print begins, but it prints about 1/4 of the image--it is as if it cropped at 8.5x11 at the top right corner of the image.
I have had to resort to saving the file as a high-res jpeg and printing from Preview as a workaround. Unreal.

LR 4 only prints a blank page on Epson 2880. Print preview panes remain blank. Window 7 OS. Need help desperately!

LR 4 only prints a blank page on Epson 2880. Print preview panes remain blank. Window 7 OS. Need help desperately!

Bob
Thank you for your kind consideration of my problem. Up until the software started to print blank pages the preview pane always showed the selected print within the selected layout. Something has changed. Lightroom will print to the JPEG file but only a blank page on the Epson 2880. I've been in contact with Epson support and an IT tech and they tell me the problem is with Lightroom. I'm at my wits end and thinking of upgrading but the glitch may carry over. Uninstalling and reinstalling and deleting the preferences file did nothing to rectify the situation.
Thanks again!
David

CS3, Epson 2880 - Dark Prints

Hopefully some one might be able to help as I am a tad stumped with a problem of dark prints from CS3 on an Epson 2880.
Macbook Pro with 10.4 Tiger
I have a calibrated monitor
CS3 setup with American Prepress colour settings
Raw picture imported into CS3 with Adobe RGB profile
So I edit the picture as required and then open the print window where I tell photoshop to manage the colours and select the correct ICC profile for my printer and paper. I then go to the Epson print driver and select the correct media type and turn off colour management.
The picture that is printed is 1 to 2 stops darker than what is should be.
Now the strange thing is if I use the Epson Print Plug-in the picture that it displays is generally dark like the print output.
If I didnt know better I would say that another ICC profile is being applied to the picture as it moves either to the print driver or to the Epson Plug-in.
If I check the picture in CS3 with proofing then I get a small colour change as expected but not the dark print that comes out.
Any suggestions much appreciated as this is doing my head in.

Please do a forum search. There are already at least two other threads on the subject of dark prints.
Here are examples:
Eric Chan, "PS3 prints fine, PS4 prints too dark, same Mac" #12, 12 Dec 2008 6:07 am
Eric Chan, "Printer Dialog Box in CS4 - Printing Grayscale Images" #26, 4 Dec 2008 8:57 pm

10.9.2 Epson R2400 not printing anymore

Hello,
Just updated to 10.9.2 and my Epson Stylus Photo R2400 is not printing anymore.
It is connected via USB and worked flawlessly all the time before.
I get this message
What is going on here?
Thanks for Feedback
Bernd

Ok, what I did is deleting the Printer from the System and installing it again.
Works again

What does 'filter failure' mean when my epson will not print?

I recently responded to a Software Update for my Epson Stylus TX610FW Printer. It has crashed constantly since. It will print a Nozzle Check but whenever
I attempt to print a document in any Application the printer crashes.
I have replaced Mountain Lion 10.4.8, I have attempted to find Epson v.2.6 as the Forums suggest and can find it nowhere.
Is there any other way of reverting to my previour driver?
When I try to print I get the following message in the Crash Box: rastertoescpll quit unexpectedly
I get the following error in the Print Dialogue Box: stopped - 'Filter' failed - 1 page
Jo Daniell

This has been addressed in another thread. Under system settings select sharing and enter a computer name, and exit. To be safe restart the computer and you should be able to print.

New imac with 10.6.5, epson cx7800 not printing, yes another question

Hu,
As stated, I just bought a new imac and am unable to print, getting this message:
Wednesday, December 8, 2010 5:53:06 AM America/Denver
E [08/Dec/2010:05:53:25 -0700] [Job 12] Job stopped due to filter errors; please consult the error_log file for details.
D [08/Dec/2010:05:53:25 -0700] [Job 12] The following messages were recorded from 05:53:24 to 05:53:25
D [08/Dec/2010:05:53:25 -0700] [Job 12] Job restarted by user.
D [08/Dec/2010:05:53:25 -0700] [Job 12] job-sheets=none
D [08/Dec/2010:05:53:25 -0700] [Job 12] argv[0]="Stylus_CX7800"
D [08/Dec/2010:05:53:25 -0700] [Job 12] argv[1]="12"
D [08/Dec/2010:05:53:25 -0700] [Job 12] argv[2]="gregwargo"
D [08/Dec/2010:05:53:25 -0700] [Job 12] argv[3]="Ginger Bars"
D [08/Dec/2010:05:53:25 -0700] [Job 12] argv[4]="1"
D [08/Dec/2010:05:53:25 -0700] [Job 12] argv[5]="APColorMatchingMode=APVendorColorMatching APDInputSlot= nocollate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMApplicationName=Preview com.apple.print.JobInfo.PMJobName=Ginger\ Bars com.apple.print.JobInfo.PMJobOwner=Greg\ Wargo nocom.apple.print.PageToPaperMappingAllowScalingUp..b. com.apple.print.PageToPaperMappingMediaName=na-letter com.apple.print.PageToPaperMappingType..n.=1 com.apple.print.PrinterInfo.PMColorDeviceID..n.=6744 com.apple.print.PrintSettings.PMColorSyncProfileID..n.=1 com.apple.print.PrintSettings.PMCopies..n.=1 com.apple.print.PrintSettings.PMCopyCollate..b. com.apple.print.PrintSettings.PMDestinationType..n.=1 com.apple.print.PrintSettings.PMFirstPage..n.=1 com.apple.print.PrintSettings.PMLastPage..n.=2147483647 com.apple.print.PrintSettings.PMPageRange..a.0..n.=1 com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647 DestinationPrinterID=Stylus_CX7800 media=na-letter PaperInfoIsSuggested..b. noPDFIsProtected..b. pserrorhandler-requested=standard job-uuid=urn:uuid:8abaf296-ebe1-3365-70ea-70ed96a97afc job-originating-host-name=localhost time-at-creation=1291769861 time-at-processing=1291812804 job-impressions=1 com.apple.print.PrintSettings.PMTotalSidesImaged..n.=1 com.apple.print.PrintSettings.PMTotalBeginPages..n.=1 PageSize=na-letter"
D [08/Dec/2010:05:53:25 -0700] [Job 12] argv[6]="/private/var/spool/cups/d00012-001"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[0]="<CFProcessPath>"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[2]="CUPS_DATADIR=/usr/share/cups"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[8]="CUPS_STATEDIR=/private/etc/cups"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[9]="HOME=/private/var/spool/cups/tmp"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[11]="[email protected]"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[12]="SOFTWARE=CUPS/1.4.5"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[14]="USER=root"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[15]="CUPS_SERVER=/private/var/run/cupsd"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[17]="IPP_PORT=631"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[18]="CHARSET=utf-8"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[19]="LANG=en_US.UTF-8"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[20]="APPLE_LANGUAGE=en-US"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[21]="PPD=/private/etc/cups/ppd/Stylus_CX7800.ppd"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[22]="RIPMAXCACHE=8m"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[23]="CONTENT_TYPE=application/pdf"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[24]="DEVICE_URI=file:///dev/null"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[25]="PRINTER_INFO=Stylus CX7800"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[26]="PRINTER_LOCATION=Degobah2"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[27]="PRINTER=Stylus_CX7800"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[28]="CUPS_FILETYPE=document"
D [08/Dec/2010:05:53:25 -0700] [Job 12] envp[29]="FINALCONTENT_TYPE=printer/StylusCX7800"
D [08/Dec/2010:05:53:25 -0700] [Job 12] Started filter /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr (PID 1566)
D [08/Dec/2010:05:53:25 -0700] [Job 12] Restarted by "gregwargo".
D [08/Dec/2010:05:53:25 -0700] [Job 12] JobManager converting file: /private/var/spool/cups/d00012-001 (7 args)
D [08/Dec/2010:05:53:25 -0700] [Job 12] PrintJobMgr trying ppc architecture...
D [08/Dec/2010:05:53:25 -0700] [Job 12] JobManager converting file: /private/var/spool/cups/d00012-001 (7 args)
D [08/Dec/2010:05:53:25 -0700] [Job 12] fatal::internal error -9660
D [08/Dec/2010:05:53:25 -0700] [Job 12] End of messages
D [08/Dec/2010:05:53:25 -0700] [Job 12] printer-state=3(idle)
D [08/Dec/2010:05:53:25 -0700] [Job 12] printer-state-message="/System/Library/Printers/Libraries/PrintJobMgr/Contents/ MacOS/PrintJobMgr failed"
D [08/Dec/2010:05:53:25 -0700] [Job 12] printer-state-reasons=none
I've uninstalled the software, reinstalled the latest drivers and software, and am still unable to print. The printer is listed as online and ready, but no printing.
any advice is greatly appreciated.
Thanks,
Greg

I have a MacBook Air 11.6" running OSX 10.6.5 and cannot print to my Canon MF4350d attached to my AirPort Express, with printer sharing selected. HAve reinstalled software over and over agin. Turned printer off, unplugged, etc. No luck. Says it cannot find the software for the printer. The computer can "see" where my printer is located, but the printer will not print. Nothing seems to wrk. Any ideas what might be going on and how I can fix it? By the way, I was able to print directly to this printer connected to my computer's USB, but now even when I do this the same problem occurs. ALL ability to print seems to be GONE. COuld it be related to the recent upgrade to OSX 10.6.5?

Lion OS and Epson printers not printing photos through Aperture or CS4

Hi everyone,
I have done a search on the above topic but nothing obvious is coming up as a solution (ie...sorry if it has been done before)
It's driving me mad.
I have 2 epson printers, R300 and Stylus 1400.
They were both performing perfectly well before installation of osx lion.
They will both print word and pages documents perfectly, they will also print from pdf and screen dump.....so they are mechanically ok, (paper loaded correctly, loads of ink etc etc ) now, here is the issue.....
When I try to print a photo from either CS4 or Aperture the information seems to send to the printer, the printer icon jumps up and down and the text for the jobs queue says 'printing'....the printer 'shunts' as if engaging to print, doesn't do anything else and tells me a second later that the status is 'completed'.....but it hasn't printed anything!!! aaaaargh
I have been to the epson website and downloaded the latest drivers....same outcome.
I have even been on the live assistance thing on the epson website, no help at all, assistant didn't seem all that competent.
Anyone have/had a similar problem.
Words of one syllable if there is a fix, I am savvy but not expert.
Cheers
Rob

Hi nenavella,
One more thing you could try, the problem re occurred for me on a different printer and I found the reason for the fault by accident, a longish story but stick with it:
I had set up an unusual custom paper size so that I could print off passport photos for a client....for reasons I don't quite understand (probably my own stupidity!) that paper size became the default size for that printer...very rarely used...so any time I tried to print anything on that printer that wasn't passport photo size...it behaved exactly like my previous issue, made all the right noises etc etc but didn't print.
To cut a long story short: On that particular printer, every time I print anything I have to go to 'Page Setup' and change it to an appropriate size (A4, 6x4, A5 etc etc...anything but UK passport size of 35mm x 45mm) before I hit the print button.
It may be worth checking that your printer hasn't somehow 'obtained' an odd page set up parameter somewhere/somehow.
If it isn't this I hope you find the problem soon, I know how infuriating it can be.
Cheers
Robin

Epson R2400 not printing correctly!

Hi, I hope somebody can advise me, I have problems since installing leopard and can't solve them:
1. When I try to print a photograph from Photoshop CS3 using Leopard, the picture is almost colorless( if I print from CS3 using Tiger the colors are correct), The software options are also cut down and I cant access area's to set the print up for printing!
2 If I try to use my scanner as a photocopier using Vuescan the preview and scan appear to work as normal but when I click to print the article scanned the R2400 just pumps out a blank page (if I do the same using my older R200 the article prints as it should.
Has anyone any ideas as to whats happening? particularly regarding problem 1 above as thats more important than the vuescan issue?
Thanks in advance I value your help very much.
Regards Denisimo

I have been in contact with Epson and solved this problem. See my post on Mac Pro forum " Problem with Epson Stylus Photo R2400 Printer on Leopard OSX"
Thanks for your advice
Regards denisimo

Epson bx525wd not printing wirless

I have just got a new mac book pro with mavrick installed and cannot use it wirelessley with the epson stylus office bx525wd or hp either ?????

Hi..
You need to visit the Epson website and find v10.9 Mavericks compatible drivers > Epson Drivers & Downloads - Epson
Same for the HP > Epson Drivers & Downloads - Epson
When you have finished download the drivers, open System Preferences > Printers & Scanners > Print then click + to add a printer.

My epson WF-3540 will not print.

After updating to Yosemite. My Epson will not print.,even with the the epson 2.19 driver update.
None of My devices can find my printer. It only works with USB plug directly to my iMac. .( iMac (24-inch Mid 2007,Processor-2.8 GHz Intel Core 2 Duo)
I've reinstalled software.
Unplugged and reconnected cables.
Print out from printer says everything passes ,network is good, but epson connect is disabled ?
What can I do next?
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: I
Processor Speed: 2.8
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: IM7
SMC Version (syste
Model Name: iMac
Model Identifier: iMac7,1
Processor Na

Network Printer Troubleshooting
If you have the printers IP address open Terminal (Applications/Utilities) and at the prompt type: ping {printerIP}. You will get a reply or failure.
Printer Troubleshooting - Yosemite
If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite

Photoshop CC printing is dark on Epson 2880

I just upgraded to PS CC, and when I print the image is dark. I use an Epson 2880. I have called Epson customer service; not resolved. I have the PS CC print settings as "Photoshop manages colour". Does anyone have a suggestion?

Epson is having a lot of problems with their printer drivers on MacOS 10.9.
Check with Epson for updated drivers.

Epson 2880 Print Paper Profiles

Hi Folks,
I just bought an Epson 2880 printer and also downloaded some Icc paper profiles for it from Epson. On install(double-clicking) on the zipped files all but one of them went through and install process, and now show up when I select printer profiles from within Photoshop CS4. The other just unzipped a file that was put into my downloads folder and says, "colorsync" on it. Where should this Icc profile be placed so it shows up properly in my CS4 profile selections?
Many thanks for any assistance.
Jim

John-Thanks, I thought that was where I should be putting them. After I wrote this note I put the icc profile into my color sync folder and it does show up from within PS 4 as it should.
Thanks again for your help.
Jim

Using epson 400 air printer have 4th gen ipad was able to find printer and print now unable to find air printer never worked right away but now all I get is notorious printer says wifi setup ok restarted ipad this and that no air printers found do not g

I am using a 4th gen ipad with an epson Xp400 air printer my ipad was able to find printer but now it cannot. Printer says wifi setup ok. Do not understand why it can't find printer. Never did work right away always have to restart ipad or do wifi setup again on the printer. I am not sure whether os is ..1 or.2 or just 6.0

bump... Anyone have any answers?

After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault

After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault.
This is the message from Epson:
The driver update 2.7 was released by Apple. The driver released by Epson is available for download from the Epson Australia web site. It is the Apple update driver download that has caused the problem.

After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault.
This is the message from Epson:
The driver update 2.7 was released by Apple. The driver released by Epson is available for download from the Epson Australia web site. It is the Apple update driver download that has caused the problem.

Epson 2880, not printing

Similar Messages

Maybe you are looking for