Epson 3800 printer profiles not showing up in Photoshop 3 and 5

When I try to print to my Epson PRO 3800, asking Photoshop to handle colors, this printer profiles are not available. I have this printer for years and have always used PS CS3 to print (and handle colors). Now I have PS CS5 but continue to use 3 for printing to the 3800, because the Epson profiles disppeared from CS5. Now they have disappeared from CS3 too. Any advices?
Thanks1

it might be helpful to include what os you are using (unless i missed it)
http://helpx.adobe.com/photoshop/kb/print-settings-option-unavailable-print.html
gballard.net/photoshop/epson/cs5/

Similar Messages

  • Elements 6 Printer Profile not showing up on Elements 10 when I go to Print

    A third party created a printer profile that I successfully used on Elements 6. However that Printer Profile is not functioning with Elements 10. I would definitely like that Printer Profile to operate when I print on Elements 10. What to do to accomplish that goal? That's the overview. Here's the details: In Elements 10, I press Print. then Change Settings. Then Print Quality (Listed as default 720dpi,terrible print quality). Press Change. That takes me to Epson Stylus 3800 Properties. That box has the right Printer Profile I used in Elements 6. I press OK to get it embedded in Elements 10, but it won't embed and I'm stuck with the 720dpi default. Can someone help with this enigma? I thank you in advance for your time,expertise and willingness to help me!

    Hi,
    How do you set this up, direct or thru an access point (AP)? Please check your setup with this book
      http://h10032.www1.hp.com/ctg/Manual/c00389927.pdf
    Hope this helps.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Printer Profiles not showing in Print Dialog

    I cannot seem to see the custom Printer Profiles I have for certain papersin the Print Dialog.
    I have added the Print Profiles to Library > Application Support > Adobe > Color > Profiles (and also in Recommended)
    But in the Print Dialog under Colour Management > Photoshop Handles Colour > Print Profile - they are not showing. I have done things like restarting Photoshop and converting the image to CMYK from RGB.
    I can see the profiles in the Proofing menu and am able to select them.
    Any ideas as without using the profiles my colour management is completely off kilter.
    Also, can I confirm that I am putting the printer profiles in the correct folder?

    Thanks for your response JJMack. I've just found out the problem. It seems that by putting the profiles in the  > Recommended folder as well as in the > Profiles folder this seems to have disabled the profiles from displaying in the print dialog.
    I'm not sure why but they are displaying fine now.
    I'm new to this forum and I wonder if you know if there is a right place or method for sharing this information as I have spent the best part of two hours this afternoon wrestling with this?

  • Custom printer profiles not showing up

    Has anyone found a resolution to this.
    The RGB Spyder Print custom profile is installed in the correct directory and is associated with my Epson R2400.

    > I now got one profile that won't show up, the one for a Tecco PPG250
    > (RC semigloss).
    > Really weird, because the profiles of the RC luster (PL285) and of the
    > FA textured-matte (BP210), which shouldn't radically differ, do show up
    > instantly in the LR dialog after install.
    Sorted out!
    In my personal case, that is only THE LAST PROFILE, by internal name / alphabetical order, that doesn't show up in the "other..." dialog - always one at a time hidden.
    So, I edited an old minilab profile I won't use in LR to show internal name as "ZZ Frontier ...".
    I now see all the profiles I want in LR - only the (long forgotten) frontier profile is missing.

  • Icc profile not showing up in Photoshop

    hi- I downloaded an ICC profile from an online printer that I want to use in Photoshop CS3 so my images appear properly for their output. I placed it in Library/Adobe /Color/Profiles and restarted Photoshop but it does not show. What am I doing wrong?

    Ramon look, if it says the downloaded ICC profile is shortrunposters.icc and you place it in the folder listed as such and it appears like that when you look at it in the folder and then when you go to the actual profile list (which happens to be over 100 profiles) and you don't see shortrunposters.icc where the heck are you supposed to look and what are you supposed to look for?
    It turns out it is Xentilcle version3.icc now how would I or anyone else know that? The creator of the profile originally said "you need to go to an Adobe site to find out the problem because it isn't us", well excuse me I think it was their lack of identification of how the profile shows up.

  • Print does not show a selected photo and won't print

    How do I get my photos printed? I select a photo but I get the maessage that no photo was selected.

    I finally called the help desk. I was told that sometimes the catalog needs to be reloaded. Instead of reloading the catalog, i ended up loading my entire library. Over 4200 pictures. This was without any filtering. But now the print feature works.
    Next I will need to figure out how get out all of the duplicates. Set up filters and get organized. I am new at this so after spending over 30 hours watching how to videos I am a little overwhelmed.
    It would be nice if the help desk guy could speak English. Well, English  that I could understand. Poor guy had to repeat everything several times. I asked if he could get me organized. Nope. Had to call back. That means sitting on hold for an hour and a half....but hey I have another 30 days of support. I am going to learn this. Although I am now convinced that I am dain bramaged and beyond help. Now how to get the e-mail notification turned off.. 50 e-mails a day. Isn't this fun.

  • Epson R2880 profiles not showing. 10.7.5

    I don't want to double post. So if any one here knows why I can't see Epson R2880 Printer profiles in Illustrator CS3 13.0.2 dialog. Lion 10.7.5, please go to this link in Adobe Color Management forum to advise:
    http://forums.adobe.com/message/4940840#4940840
    I much appreciate it,
    CB
    print dialog:

    As has been suggested in your other thread, most printer software includes a 'clean nozzles' command, but I would add that you should all replace all your printer ink cartridges since you said that they haven't been used for a while, as they will probably keep clogging.

  • Unable to install Epson ICC printer profiles in Lion (access privileges message)

    I upgraded to Lion and cannot install Epson ICC printer profiles. When I try to install, the installation is halted with the message that I do not have enough access privileges for this installation. Yes, I am the admin (I checked, as I know this is a known issue). I have the current updates to the O/S and the Epson driver. Specifically, these are printer paper profiles for an Espon Stylus Photo R2800 printer.

    The ownership of the /Library/ColorSync directory and its contents changed in Lion.  You acutally do not have enough priviliges as admin to write to that directory anymore.  EPSON's installer does not have the ability to ask you for your password to escalate the admin privileges to root.  You should report this to EPSON and insist that they update their installer.
    There is a way to get the files installed, but it is pretty involved.  I will give you the general idea but USE AT YOUR OWN RISK.  There is a risk you could break your system and make it unusable.
    With those admonitions in mind, here's the general outline.
    1.  Go to /Library/ColorSync.  Highlight the folder and do a Get Info on it.
    2.  Under the Sharing & Permissions portion, give "everyone" the ability to Read & Write.  Then choose to have this applied to all enclosed items.
    3.  Run the EPSON installer(s).  The profiles will now install.
    4.  Change the ownership and permissions for all the installed items useing the Terminal--
    For the EPSON folder the command is 'sudo chown -R root:wheel path_to_EPSON_folder'
    For each and every item in the EPSON folder, the command is 'sudo chmod 644 path_to_item'
    5.  Open Disk Utility and Repair Permssions.
    Message was edited by: Matt Broughton

  • Drivers for Epson 3800 printer

    Hi, I am just beginning to learn how to print and would like to set up my Epson 3800, print from Lightroom, using Leopard. From reading all the issues folks have had, my first question is this: Should I even download the drivers that came with the printer, or do I use the new ones available on the Epson site? I gather paper profiles are included on the CD that came with the printer--would those also be on the download from the Epson site? Having never set up a printer to begin with, any help would be greatly appreciated.

    OK ... A difference! In ColorSync Utility, I clicked on Devices, expanded Printers->Epson Stylus Pro 3800->Pro38 PLPP. Then, clicked the drop down for "current profile" associated with this paper, and chose Other and navigated to the Pixel Genius Epson Exhibition Paper profile, because this is the profile I want to use with EFP paper from LR. The driver paper selection is PLPP. Now it's associated with the profile I want to use. If I were to ever want to use PLPP paper, I would have to remember to reverse this in ColorSync I presume. NOW ... I went into LR and proceeded as if I would print using the PG profile from LR. When I went into the driver, I clicked on Preview and low and behold .... NO more green cast!! I can assume the output to the printer would be OK. Whether the PG profile is doing its job from LR, I don't know for sure. It looks from Preview the same as if I had specified Pro38 PLPP in LR. Anyone??
    EDIT: I've CONFIRMED it! The ColorSync workaround DOES fix the 3rd party profile problem in LR! I specified Pro38 PLPP as the profile in LR, compared it with the PG Preview and there was a difference, proving that the PG profile was being used to render the print output from LR, now without the color cast.
    BINGO! Just printed out the previous problem image, and it printed exactly as shown in Print Preview specifying the PG profile in LR for Epson EFP (which says to use PLPP in the driver, but that paper is now associated with the PG profile via the ColorSync Utility). At least there's a workaround fix to the the color shift problem printing from LR!
    TIP: As learned from Jeff Schewe in his Camera to Print tutorial, remember to set Print Sharpening to High in LR to achieve printer output sharpening.

  • Printer does not show in Printer & Fax

    My printer had a fit and in the attempts to fix it I managed to delete the drivers. After reinstalling the drivers from disc the printer would not show in the Printer & Fax ADD window.
    In fact the only place the printer does show up is in the System Profiler.
    The printer is a HP Officejey 6110 all-in-one and worked fine as a printer up to now.
    It is connected to my IMac via USB the connections have been checked and the printer and computer have been shut down several times.
    The printer will print the HP Utilities tests and shows in the system profiler so it cannot be a connection problem, the drivers have been reinstalled so that should not be a problem?
    Does anyone know what I can do short of getting a new printer?
    The system is an IMAC OS X Version 10.5.8 fully updated
    Processor 3.06GHz Intel Core 2 Duo
    Memory 4GB 800 MHz DDR2 SDRAM
    Thanks Heaps for any help
    Leonard husband of Belinda

    Hi Paul;
    thanks for the prompt reply I used the drivers fromthe OSX disc and reset the printing system 3 times even going to the extent of doing the reset and closing down the computer and the restasting from scratch. No luck at all for some reason the printer could not be found by the add printer function.
    The wife dragged me out to the shops today and we ended up getting getting the HP Officjet 6700 Premium it and the MAC work fine together.
    thanks for the help
    Leonard

  • Newly added printer is not showing up in printer list in Acrobat 11.0.3

    Hello,
    We are using Acrobat Pro 11.0.3. We recently added a new printer and that printer does not show up for one user of the machine in Acrobat. It shows up in other applications and under Printers. Other users who log into the machine can see the printer in Acrobat. I have uninstalled Acrobat, rebooted, reinstalled. I have also removed referenced to Adobe under HKEY_CURRENT_USER as well as APPDATA to no avail. Any suggestions would be greatly appreciated.
    --mitch

    I have the same problem. Have you found any solution to this issue?

  • Print preview not showing values correctly. (single words are omitted)

    Hi,
    When viewing print preview of ME23n , it does not shows the values correctly.
    It omitting the single words.
    If its having 2 or more words, it displaying correctly
    For example;
    This is the vendor & its address.  (check attached image img1.jpg)
    ZERANDIB BUSINESS APPLIANCES
    Number-122/A
    PO BOX 41,112,REID AVENUE
    COLOMBO-04
    When displaying the print preview, it shows only some parts of the above address
    Shows only; (check attached image img2.jpg)
    ZERANDIB BUSINESS APPLIANCES
    PO BOX 41,112,REID AVENUE
    These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
    I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
    In the above example, it is not showing Number-122/A and  COLOMBO-04 (Its a single word. No spaces there)
    If its like --> Number - 122/A   &  COLOMBO - 04 ,  then it will display in the print preview correctly (where there are spaces after - mark)
    check img3.jpg
    If its having more than one word, then it will display correctly in the print preview.  As below;
    ZERANDIB BUSINESS APPLIANCES
    Number - 122/A
    PO BOX 41,112,REID AVENUE
    COLOMBO - 04
    Any ideas how to resolve this issue?
    Is there any thing to do with printer settings & configurations / netweaver admin point of view?
    Best Regards.
    Zerandib

    Hi Zerandib,
    By the way , since its a standard program, i think that code is out of our scope.
    Me23N is a standard tcode but cusomters create Z-Program for printing by making a copy of standard.
    You may please check upon the same.
    Is it possible to check the results on a system where patch has not been applied ?
    Regards,
    Deepak Kori

  • 5s finger print scaner not show on settings.

    i brought iphone 5s 3 month ago and finger print scanner was working perfect but suddenly my phone,s finger print scanner stopped working  and i restored my
    iphone 5s now finger print not show on security options,still i have apple  Repairs & Service Coverage: April 8, 2015 please guide me what i want to do ??????
    thanks
    regards ujitha (iphone 5s owner)

    is it possible that finger print scan not show in settings (security) i'm confused can you guess is this hardware or software problem..,i restored phone using iPhone6,2_7.1.2_11D257_Restore ,but it didn't work but before i restore it finger print scan setting show on settings but i couldn't scan my finger it says that operation fail try again latter but after restore i didn't get that error  massage also now i feel that i;m using iphone 5 which has 5s look,here i'll attach some pictures.,,

  • Epson 777i printer will not print

    Epson 777i Printer will not print
    I am using an imac with the Epson Stylus Color 777i printer,Gutenprint v5.2.3 and also the Epson 580 printer.
    Yesterday the 777i stopped printing.  It is in the paused mode. I have replaced the ink cartridges and have tried to
    perform troubleshooting but, the printer will not respond to any commands.  The green light is on, neither of the
    other two lights are on.
    The 580 printer is working with no problems.
    I need some assistance to get the printer back on line if at all possible.  I am not too tech smart, but can follow
    directions well.
    Fred Holmes
    Lompoc

    Mac OS X: About the Reset Printing System feature ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    10.5/10.6/10.7/10.8 instructions...
    In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
    if you hold option and click the "-" tab it resets the printing system.
    http://www.macosxhints.com/article.php?story=20031215144430486
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
    Resetting the printing system in Mac OS X 10.5.x+++
        1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
        2.    Choose System Preferences from the Apple menu.
        3.    Choose Print & Fax from the View menu.
        4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." 
   
  As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
    http://support.apple.com/kb/ht1341
    Reboot.

  • Epson 3800 Printer & Photoshop CS4

    I've had the snow leopard disc since it came out some 6 months ago, but haven't installed it due to so many issue that I've read about.
    1) Is anyone using snow leopard successfully with the Epson 3800 Printer? Epson has yet to release (if they ever will remains a mystery for owners of this printer) a full-fledged update for the driver.
    2) Is anyone using Photoshop CS4 with snow leopard without issues?
    Thanks.

    Well Adobe did it again offering a discount to convert to CS5 just before they released a new version of PSE that is PSE9 for mac
    Tested it and the colours come out perfectly just like CS5 and they acutally left in the option on the print screen to select "NO COLOUR MANAGEMENT". In CS5 they pulled it out and as PSE9 appears to be made up of CS5 they must have back tracked on this option after the yelling and screaming from the community.
    However we now have(another problem) an issue with grey/cyan printing outside the image area being printed see
    http://forums.adobe.com/message/3172635#3172635
    cheers.

Maybe you are looking for