Epson 4630 just stopped showing on AirPrint?

Need help please, my air printer just disappeared?
I have an Epson WF 4630 that I have been using via Air Print on my normal personal WiFi network for a month without problem...UNTIL yesterday. For some reason I cannot detect my printer on my MacBookPro, my iPad, or my iPhone. All are logged into the same WiFi network. I turned off my printer and turned back on, didn't help. I reinstalled my WiFi (including my password that allows access) and the printer shows the correct network, accepted my password, and shows excellent strength. I have downloaded and used the App's from Apple store "Epson iPrint" and "EPSON Printer Finder", my Epson has disappeared.
When I go to use my printer that was previously working through my MacBookPro it says "printer not connected". When I try and AirPrint from my iPad, my iPhone, or even from a friends iPhone on the same WiFi network it says No Air Printers Found.  Please can someone help me figure this out. I am completely at a loss.
Thank you very much!!

Greetings StinnettM,
Welcome to the Apple Support Communities!
I understand that you have an Epson printer which was used with AirPrint previously, but is no longer working as expected. You have already completed some good troubleshooting steps by reconnecting to the Wi-Fi network, but there are a few more steps I would suggest working through. Please refer to the attached article for more information. 
About AirPrint - Apple Support
If you're unable to print
Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
Make sure your printer has paper, and enough ink or toner installed.
Make sure your printer is connected to the same network as your Mac or iOS device.
Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves the issue.
Check to see if your printer has any error lights or indicators. Check the documentation that came with your printer to clear any errors displayed.
Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
The information below is provided by each manufacturer and is updated once a month by Apple. You can use the Find feature of your web browser (usually Command-F) to search for a specific device in this list. If you don't see your printer or server listed, check with the printer manufacturer for more information.
Cheers,
Joe

Similar Messages

  • Ipod has just stopped showing up on my desktop

    hi
    I have an old second generation ipod which I have been using
    as an external hard drive to transfer work. It recently stopped showing
    up on my desktop. It shows up on disk utilities but will not mount.
    The files on it are pretty important and I don't want them to be erased
    by disk doctor. The ipod is still showing do not disconnect on it's display.
    Is disk warrior the way to go?
    jools

    and have tried it on a mac desktop also - same problem.
    Try this on one of the Macs ...
    Open a Finder window. From the menu bar click Finder > Preferrences
    Select the General tab then select:  Show External Disks

  • Please help! Installed fonts just stopped showing up in CS4 MAC, how do i get them back?

    Hi there,
    I'm on a MacBook Pro running OS X 10.6.8
    still on Adobe CS4, i initially had problems getting CS4 to see my installed fonts when upgraded to Snow Lepoard, googled the problem, tried several different things for hours - something worked not sure what exactly but CS4 started seeing all of my installed fonts.
    Now all of a sudden, they are not showing up again, i have not downloaded anything, installed anything, moved anything - were all there and working last week, and then this week they are not.
    I have 1060 fonts installed - work for an agency with hundreds of different clients so need a lot of fonts. Am not using any font manager - just fontbook, is that the issue? all 1060 fonts are showing up as installed in Fontbook....
    I have some fonts in HD>library>fonts, and also fonts in user>library>fonts, could this be the issue? is it best to have them in just one place? if so which folder is best to have all fonts in?
    I know indesign has its own font folder - which is now where it seems to be reading fonts from, and illustrator is reading its fonts from somewhere else - only about 30-40 are showing up there, system fonts folder i'm guessing?
    How can i get indesign and illustrator to read fonts from my actual font libraries?
    any help is much appreciated! Our graphic design team of 2 are the only ones on macs so all our IT support guys are PC based and never know anything on how to fix mac issues so i'm on my own with this issue!
    Thanks
    Mel

    If you are managing fonts with font book, then all should be well. Something else is going on. Try installing Onyx and use that to delete all your caches including your font cache. You willl need to restart your computer after clearing your caches.

  • Epson R2400 just stopped printing...

    I have an Epson Stylus R2400 printer, it has worked fine for months but suddenly doesn't! My Mac (Mac mini with 10.3.9) can communicate with it fine, it checks the ink cartridges etc etc, but when it comes to printing it either says 'communication failiure' or just keeps trying to 'open printer connection'. I have tried it printing from Acrobat (which I usually use for prints no problem), Illustrator, Photoshop etc, and the result is the same. I know it's not the cable since the Mac does communicate with the printer to do tasks, but just won't print.
    Any wise words?
    Thanks

    You should check the troubleshooting section of Epson's web site and/or contact Epson's tech support to request assistance. I had a similar problem several months ago with another Epson printer and I submitted a tech support request via their web form. The next day, they sent me a response that solved the problem, so I suggest you do the same if you can't find the solution already documented on Epson's web site.

  • ---URGENT---My Camera JUST stopped showing up in the iPhoto Library...

    I usually import photos once a month or more into my library, so I decided to import photos today... especially since I need to get a certain photo on my computer to email to someone BY TONIGHT- and even though my camera usually works fine with the program, today it didn't even show up in the sidebar, or even ASK me to import...
    -My camera is a Canon PowerShot SD800 IS Digital Elph
    -My iphoto is '08
    PLEASE send me any suggestions! Thanks!

    No go.
    - The camera shows up in System Profiler.
    - The camera works fine to import photos on my MacBook Pro which is running Leopard, not Snow Leopard.
    - On my Mac Pro w/Snow Leopard 10.6.1, and a fresh install from the original iLife 08 DVD, as soon as I turn the camera to the "connect to computer" setting, iPhoto 08 launches but goes into a loop with that Type4Camera.app app crashing.
    - Same thing happens with Image Capture.
    - No relief from deleting all plists having to do with iPhoto, Type4Camera, and Image Capture and reinstalling iPhoto.
    Definitely a Snow Leopard problem.

  • Airplay symbol stopped showing on iOS5 devices

    Airplay symbol used to show on iPad2 and iPhone4S for use with Apple TV(2).  Now it just stopped showing up.
    I tried reset of ATV.  All devices are on the same wireless network.  All devices are logged into the same iTunes account.
    Any suggestions?

    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

  • Smart guides just stop appearing (CC)

    Both me and my colleague have noticed with InDesign CC that smart guides just stop showing up. Those little clicks you experience as you change the position of an objects edge and the green lines appear... they just don't do that anymore. Anyone else experienced this?

    9.1, Mavericks, no.
    This may be related to advice here: http://forums.adobe.com/thread/1321605
    We're creating prototypes for sites and to circumvent the issue of InDesign not placing objects on whole numbers we're using a 1px x 1px grid... it could be that this interferes with the smart snapping and snapping of objects? We could swear though that we had both the green smart guide lines appearing and this grid simulataneously?

  • Lion to Win7 (bootcamp) Sharing just Stopped

    I have all my music on my macbook pro running lion (the newest version).
    On my Mac Pro which I run in bootcamp, all of sudden, my shared library no longer shows. I have the newest version of iTunes on the bootcamp side of the Mac Pro as well. It worked fine for ever, but now it just stopped showing up. The only thing I can think of that changed was updating Lion to 10.7.5 (on the computer that is hosting the music).
    On the Lion side of my Mac Pro, sharing works fine, which leads me to believe it is a setting in Win7 or something. I checked my firewall in Windows7 and there is a rule to allow itunes so I am unsure what the issue could be.
    Any help would be appreciated!

    UPDATE
    Ok so I think it is somehow related to my Mac Pro (Bootcamped in Win7 64bit).
    If I switch from my Local Area Connection for my Wireless connection, homesharing works.
    So using wireless I can home share, but using a wired connection it does not. Both the Local Area Connection and the Wireless had the same exact settings (IPv6 etc...).
    Screenshot: http://tinyurl.com/9qvwh2w
    Really I am just curious why this is the case. I do prefer a wired connection so I am hoping to get to the bottom of this.

  • User Views Stopped Showing

    This just started.  I have one user for which all of his team's views just stopped showing.  His other team members can see them but they don't show up for him.  The permissions to these views are located in one security role that I created
    for their team.  The default views show, and a couple of custom views also show.

    Do you want something like the following:
    SQL> show long
    long 80
    SQL> select text from user_views where view_name='ALL_ALL_TABLES';
    TEXT
    select OWNER, TABLE_NAME, TABLESPACE_NAME, CLUSTER_NAME, IOT_NAME, STATUS,Then set a higher output limit...
    SQL> set long 1000
    SQL> /
    TEXT
    select OWNER, TABLE_NAME, TABLESPACE_NAME, CLUSTER_NAME, IOT_NAME, STATUS,
         PCT_FREE, PCT_USED,
         INI_TRANS, MAX_TRANS,
         INITIAL_EXTENT, NEXT_EXTENT,
         MIN_EXTENTS, MAX_EXTENTS, PCT_INCREASE,
    ...Edit: Sorry Satish, I type and copy and paste too slow :)
    Message was edited by:
    orafad

  • I just got a new iPad air and also own an iPhone 5. I'm receiving most of my text messages on the iPhone, but some but not all are also showing up on my iPad. I don't want them on my iPad, any suggestions on how to get them to stop showing up n my iPad?

    I just got a new iPad air and also own an iPhone 5. I'm receiving most of my text messages on the iPhone, but some are now also showing up on my iPad. I don't want them on my iPad, any suggestions on how to get them to stop showing up n my iPad?

    Go to settings>messages>send and receive at>you can be reached by iMessages at> Uncheck your phone number and you can select your Apple ID emal address if you want to use that for messages.

  • HT4623 My Iphone 4s just stopped during the latest update and now the screen show the Apple icon and an white bar beneath.  I can no longer get anything to work on the phone!!  Where to from here??

    My Iphone 4s just stopped during the latest update and now the screen show the Apple icon and an white bar beneath.  I can no longer get anything to work on the phone!!  Where to from here??

    You can not merge accounts.
    Apps are tied to the Apple ID used to download them, you can not transfer them.

  • I have a 5th gen ipod and recently all of my video podcasts stopped showing up in my ipod.  They still show up and play in itunes, just not in my video podcast list on my ipod.  All of the podcasts are Quicktime Large.

    I have a 5th gen ipod and recently all of my video podcasts stopped showing up in my ipod.  They still show up and play in itunes, just not in my video podcast list on my ipod.  All of the podcasts are Quicktime Large.  For some reason my ipod has stopped supporting Quicktime Large.  Now I've had to redownload every video podcast as Quicktime Small. 
    Anyone have any ideas whether this is from the the software version 1.3 and if they'll fix it in the next update?

    I'm having same problem, but QT Small videos are also not getting synced.

  • HT3529 my iphone just stop connecting to my wifi and i have tried all the recommended troubleshooting with no success. Also when i send a text , it shows it coming from my email address instead of my cell #. i cant get a text going to my cell #. help

    my iphone just stopped connecting to my wifi and i have tried all the recommended troubleshooting with no success. Also when i send a text , it shows it coming from my email address instead of my cell #.  i dont receive any text going to my cell #. help

    If i understand what you are saying then you are seeing the WiFi indicator after connecting but Apps are saying that they are not connected to the internet?
    Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be to restart your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

  • I downloaded a show on itunes and it will not play the last 15 minutes.  It just stops and can't go any further.  How do I fix this?

    I downloaded a show on itunes and it will not play the last 15 minutes.  It just stops and will not go any further.  What can I do?  I am using a pc.

    I'd report the problem to the iTunes Store. 
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

  • I have a macbookpro. when I connect any camera to the mac it does not show as a device. How do I load my pictures to either iPhoto or Aperture? It worked before but just stopped working. Any suggestions?

    I have a macbookpro. I use Aperture and Iphoto. When I connect any camera to the Mac it does not open it as a device in Iphoto, Aperture or in Finder. It use to work but just stopped. Any sugestions?

    Here is the full story. It may be long so please bear with me. I take a lot of pictures and movies. Since I have over 30,000 pictures I decided to place the Iphoto library on an external drive to save space on my internal drive since ot was getting very full. After I did that it worked fine for a while. Then one day I could not open the Iphoto library. Since I was overseas at the time I brought it to the IStudio ( not an Istore) overseas. They said to rebuild the library and they would do that for me. It took all day since I had so many pictures. When they called me and told me it was ready, I went to pick it up. They started to show me the new library. It crashed again. Not knowing how to fix this at the ISudio, they installed Aperture and imported the Iphoto library. This worked fine for a short time.When back in the states, it crashed again just like Iphoto. I took it to the IStore. They did not know why the overseas Istudio did what they did what they did  and rebuilt my aperture library. Again it worked fine. Now that I am overseas again. It crashed again. However, I concluded that the reason for these crashes is becuase I have the file on an external drive that derives its power from the Mac and not by itself. When I use it and stop for a while the MAC will go to sleep and this cuases the external drive to shut down. This then causes the library to have inconsistancies. Therefore, when it happened this time I tried to repair the library and after 36 hours it would close down Aperture. Therefore I decided to rebuild the library. That did not work either. So I tried opening the Aperture library with Iphoto. That seemed like it was going to work but after importing half of the 30,000 plus pictures. I photo shut down. I then made a new aperture libary and erged the old library with it. This worked. I now have an aperture library that works. However, when I plug my camera into the MAC nothing happens. The camera does not show up in devices in either Aperture, I photo nor in Finder. The USB port and cord I use works fine becuase I can read my external hard drives fine. I checked as SIG suggested in this thread and everything is set to open aperture when the camera is connected.
    I have the newest OS version 10. 7. 2 and the computer frequently updates all my programs. I have not installed any ne software lately. The problem happens both if I am on battery or plugged in. Just before I came overseas the IStore replaced the Battery.   I can go back to the IStudio  here overseas but the last time I was there and told them about the problem ( I did not have my computer with me) they did not impress me with their wisdom. I will be back in that city in a month and can go there if need be.  Thanks for all the help so far. God bless.

Maybe you are looking for