Epson 5500 Printing Issues with Photoshop

I hope someone can help me. I design wedding invitations and I use Crane paper. When I design in Photoshop and print on the Epson 5500 the color black or any other color comes out lighter than what the screen color is. Any suggestions? Thanks.

I find using cotton paper makes the image clearer. I have only used the printe for the cotton paper. They look beautiful. Just recently I started to print text on the paper and that is when I am running into problems.
1) I am using an older version of Photoshop 6.0. I know I have to upgrade.
2) I have done a lot of research and it looks like I may have outdated printer drivers. Could that be the case? I did download the driver from Epson. Is there another driver I may install?
3) I do not understand how my picture can come out in beautiful colors but my wording looks like crap. When I print text the output looks like I am low on ink (that is how bad it looks)......I have a wedding invitation order to print and I cannot give my client this quality of work.
Please help......Maybe I do not understand the color management etc.....Do I need to do something with color management? I really think it is much deper than that......

Similar Messages

Print issue with Photoshop CS4 and Officejet 6500

I have a Windows 7 Business 64 bits desktop computer. After installing the Officejet Pro 6500 multifunctional drivers all was working OK. Images were being printed nice and with the correct size using Windows print option. After installing Adobe CS4 suite, all images printed from windows or Photoshop have incorrect size (photoshop prints it smaller, about 33%, and on upper left corner of the sheet).
Photoshop sucks but Illustrator print fine. The only way I can print at the good size in Photoshop, it's when I select Microsoft XPS document writer as printer and print from there... Not very user friendly !!!
And yes, it was always the HP Officejet 6500 E709n fax selected by default by Photoshop instead of HP Officejet 6500 E709n !
Is anybody can say if it's an HP issue or an Adobe issue ??? Why Illustrator print fine and Photoshop don't ???
Thank's in advance.

Deleting the fax printer associated with this device to allows correct printing is not an acceptable alternative for me.
If it is a printer issue, why I can print correctly from Illustrator ???
dec9 wrote:
Or: you can go into windows and select a default printer or then the one you use to print with in PS. Then when you are ready to print in PS select the printer. See if that works.
That's my normal configuration then I can't change nothing when all is ok.
Thank you very much for your answer ! Maybe anybody have an other solution or explanation.
Thank's for your patience.

Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?

Seeking help with PS Elements 11 which does not work with Epson r2000 printer. Epson tech support could not fix, said it is PS e11 problem. Receive prompt on PS e11 screen when I try to print stating "not compatible or settings are not correct. Have set PS to manage color and printer manages color to off. Would appreciate any suggestions. Thank you.

Hi,
Sincerely appreciate your help. Running Windows 7 on a Dell XPS420. System has been very stable for years. Before purchasing the Epson r2000, I owned an r1800 which was an excellent printer but after seven years started to exhibit paper feed problems. The r1800 worked with all applications and I was well satisfied with the saturation, contrast, etc. printing mostly 8x10 and 11x17 prints.
Thank you for the information about the # of installs for PS E11, will try uninstall/reinstall this morning.
Will let you know how things go.
Richard
Date: Thu, 12 Sep 2013 19:47:38 -0700
From: [email protected]
To: [email protected]
Subject: Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
    Re: Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
    created by Barbara B. in Photoshop Elements - View the full discussion
What operating system are you using?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5678022#5678022
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5678022#5678022
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5678022#5678022. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Printing problem with Photoshop CS 6 extended and HP printer

Hi all, long time browser, first time poster.
This is a weird issue, it should be noted from the first that I only have weird computer issues. I work at a technical High School where we have the whole Adobe CS6 Extended suite installed. We are running it under a fully patched version of Windows 7 and all the CS6 updates have been applied on 25 machines that all have the same issue. The problem is that when the students go to print to our HP Color Laser jet CP6015DN, the job can been seen loading into the queue, it races up to about 45MB, then sort of strolls to load the rest of the document, usually about 59 to 75 MB's in size. Then I watch the message go to processing, the front panel of the printer says processing, then the print job disappears from the printer queue and the printer and there is no print out. I printed out the usage job log and it shows none of the failed attempts to print and I check the event log page which does not show the errors either.
Looks like a bad printer driver, right? So I download the new HP Universal printer driver, I normally do not do the Universal driver route as so many of my older printers have problems with it, but the CP6015DN seems to have trouble accessing the extended tray 5 with the specific drivers, but I have the same printing issue with the new Universal driver and the PS driver. So I wander through the HP manual and it suggests using profiles to print to the printer and move the color handling from Printer Manages Colors to Photoshop manages colors and I track down the ICC profiles for the printer on the HP site as the link in the book is dead, so try the CP6015srgb_d50.icc, CP6015_cmyk_d50.icc and CP6015.icc, I try all of these profiles with the newest PS printer driver and the same error, goes to the printer and into the bit bucket. Still no printout or error message.
Strange thing is that if I do a test print, it prints fine, if I open a tif file in Photoshop, it prints fine, now the teacher says if they print to the Xeorx 7760 in the next room, it also prints out fine. It should be noted that we had so many issues with configuring the Xerox and adjusting controls it was the reason we purchased a HP proofing printer in the first place. But the next door lab is all Apple, which doesn't seem to have this issue. So I open the test document and save it as a PDF file instead the native Photoshop format, and it prints fine, which from what I've been reading on the internet may be the preferred way of printing proofs, I don't know, I've never really used Photoshop, but the teacher says this isn't an acceptable fix and the students should be expected to manage a number of revisions saved to PDF format, me I just go up a number at the end of the file name for every correction when editing documents.
Any suggestions you have would be appreciated.
Windows 7 X64
Photoshop version 13.0.1 x64
HP Color Laserjet CP6015 DN model number Q3932A
Dell Optiplex 980 i5-650, 3.2Ghz, 8 GB RAM.

Yes, Photoshop is up to date at Version 13.0.6. I have even gone so far as to uninstall CS 6 and put CS 5 back on and still the same thing. This is really frustrating, the people at Canon try to be helpful but wind up saying it's an Adobe problem and of course you can't talk to real people anymore about CS 6. My research on the Internet has turned up nothing so I'm stuck.

Strange Printing Issue With New HP & Pages

Hello!
I have a very strange printing issue with a new HP printer. I have written pages documents heavy in Texts which are located within tables. The documents print fine on a Cannon and Epson printer and look great but when I print the document on my new HP Laserjet Pro 400 Colour M451nw some of the text on some rows come out of the printer looking like they are bold / slightly fuzzy. This only happens with some of the rows of text, not all of them. The font is the same in every row with the same format.
You can see this in the attached image. The first line (Thanks very much) has printed correctly but the subsequent lines look bold / slightly fuzzy.
After a lot of testing the only way I can resolve this is if I copy the content into a new pages document and only then it will print and look ok with the HP printer.
This must be a problem within my origional document. I would simply copy and paste everything into a new document however this would take a very, very long time (over 5 years of work producing teaching materials and over 100 documents and thousands of tables and formatting that cannot be copied and pasted).
Also, on other printers you can see the lines seperating each row of the table. These lines are not visible on the HP print outs, even when the table is copied into a new document.
Has anyone come accross an issue like this before? Is there a way I can fix this without creating a new document? Do I need to get a new another new printer (the 4th printer this week!)?
Any advise, wise words would be greatly apprechiated!
Thanks!

Sorry, Fruhulda. After 4 hours on the phone with Apple care they are taking this issue further themselves. It seems to be a problem with our pages document and the compatibility with certain drivers. We have still not gotton to the bottom of it and Apple are going to get back to me when they have an answer.
We also worked out that the issue only happens when you print via Ethrenet & USB. Printing via Wifi is ok and there are no quality issues.
Very Strange!

Auto adjustment of page orientation causes printing issues with documents that have a page width greater than its page height.

Hi,
Since an upgrade from Word 2003 to Word 2010, we are experiencing printing issues with certain
documents that have a page width greater than its page height.
In Word 2003, it was no problem to set the page width greater than the page height while setting the page orientation to "portrait".
In Word 2010, this seems impossible: despite leaving the page orientation to "portrait", if one changes the page width/height as stated,
Word 2010 automatically adjusts the orientation to "landscape". Resetting the orientation to "portrait" will flip the page's width/heigth settings.
This behaviour causes printing problems: the page prints out 90° rotated.
I do not believe this is a printer driver issue: I tried several different printer drivers, and all give the same (bad) result. Setting the printer driver's page orientation settings (before printing) makes no difference, as
Word 2010 seems to force the page orientation settings.
Inserting the documents 90° rotated is not an option, since it causes problems with the printing margins.
This is very annoying, since we have to print official documents of a municipality (driver's licences).
Is there a workaround for this issue?
Regards,
Laurent Grandgaignage
Sysadmin Gemeentebestuur Stabroek, Belgium

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can follow these steps to test this issue
Step 1: Repair Office 2010
1.
Click
Start, and then click Control Panel.
2.
Click
Programs and Features.
3.
Click the
Office 2010 program that you want to repair, and then click
Change.
4.
Click
Repair, and then click Continue. You might need to restart your computer after the repair is complete.
Step 2:
Rename the global template (Normal.dotm)Follow the steps for the operating system that you are using:
Windows Vista and Windows 7
a)
Exit Word 2010
b)
Click
Start.
c)
In the
Start Search box, type the following text, and then press
ENTER:
1.
%userprofile%\appdata\roaming\microsoft\templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
Microsoft Windows XP
a)
Exit Word 2010
b)
Click
Start, and then click Run.
c)
In the
Open box, type the following text, and then press ENTER:
%userprofile%\Application Data\Microsoft\Templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
f)
Close Windows Explorer.
How to troubleshoot print failures in Word 2010, Word 2007, and Word 2003
http://support.microsoft.com/kb/826845
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

Thanks for the reply. I'll have a look at your solution.

Does anyone know of any issues with photoshop CS4 and Mountain Lion?

Does anyone know of any issues with photoshop CS4 and Mountain Lion?

See here:
http://www.macrumors.com/2012/07/25/adobe-and-avid-report-only-minor-issues-with -mountain-lion/

Hi, I have an issue with Photoshop CC and Lightroom

Hi, I have an issue with Photoshop CC and Lightroom. I purchased a subscription the other day, they told me to install the CC app to install these. I installed the app, logged on and it still says trial version. How can I solve this? Could I be that the subscription is not activated yet?

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

Need help with Photoshop CS5.5 Printing issues with Epson R2880

Hi,
I'm experiencing problems printing on photoshop, I already selected center image but the epson printer always print to the upper left hand corner of
the page. And the image is always cropped in a weird way, so eveytime I print the image is not a whole. I made sure I selected the right paper size too.
It used to print okay, this happened a while ago but I don't know how it got fixed evetually, I think was after a complete restore of my OS.
I am sure its nothing to do with the Epson driver, becuas after I export the file from photoshop to PDF it prints fine with either preview or adove acrobat.
Has anyone else experienced such problem?
Thank you!
Shao

Nope, not using the presets, i still cant figure out why it suddenly cant print right!
btw, thnks for the link, its very useful!!

My epson stylist 3880 will not print with Photoshop CC on Mac OS 10.9.3. I've already talked to epson, the printer works with Preview.

There is nothing wrong with the printer or drivers. Something is wrong with Photoshop CC. The error box says:
"There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."
Any suggestions?

Hello charlottedk, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having cartridge and printhead problems. I would like to try and assist.
I would suggest performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend following the steps in this document on an 'Incompatible Print Cartridge' or 'Print Cartridge Problem' Message Displays on the Computer or P...
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Adobe CS6/CC and Epson 9900 printer issue

Today I spent about 3 hours trying to print a larger image off an Epson 9900 with no luck. It seemed that no matter how I oriented the image or altered the settings in the printer driver window on the computer, the printer would always start printing from the corner opposite the actual beginning and only print about 2/3rds the length of the image. The print was on a 44" wide space, 32" long with the image centered and measuring 34"x28" in size. Once the file was sent the printer, it would begin to print in the proper margin, but stop the print around 27" instead of 34" and from the wrong corner.
Anyone know why? I think it might be an issue with the latest upgrade as this did not happen a month ago when I printed it the first time and when I plugged in my personal computer, which hasn't been updated yet, it began to print the image without any complications.

Sorry, I was in Photoshop trying to print an image.

Lightroom print issues with Espon Stylus Pro 4900

I'm having a weird issue with my StylusPro 4900 + Mavericks/Lightroom
My prints keep coming out 1/3rd their normal size.
I spent the day troubleshooting and no luck
Using LR4 ad now CC LR + Installed all the updates.
Uninstalled old the old drivers and reinstalled new.
Restarted several times.
Cleaned up the OSX stuff and more .
I have been using Epson's for over 10 years but have never run into an issue like this.
I'd appreciate any ideas or help!

Not hearing back about the details of your "success" with the Epson driver install, I can only assume that it really does not work correctly - as is the case with everyone else I've read about trying to use the 2200 under Snow Leopard.
The only work arounds are two, and neither is satisfactory:
1. You can turn off Color management in the first photoshop print dialog and then select the color managed option in the second - this defaults to the printer's drivers instead of using those in photoshop. The result is not right - the colors and brightness are noticeably off - but it is "less unbearably horrible" than what you get if you try to print with the correct workflow: Photoshop manages colors in the first dialog and No color management selected in the second.
2. There is a Gutenberg driver for the 2200 that theoretically could let you print without the Epson printer drivers. However, I have yet to encounter anyone who has gotten this to work properly so that it duplicates the color results formerly achieved with the Epson driver and photoshop managing colors under the earlier versions of the OS.
This is not a good thing. Many of us who rely on the Epson 2200 are not suddenly and without warning and with no word whatsoever from Epson... just plain SOL...
Epson should at least say something about this. Their statement could be "we will not support this printer under Snow Leopard" (terrible policy, but at least we could all go out and shop for new HP color printers...), "we are updating drivers for this (these?) printer(s) and will have them available shortly," or even "we are looking into this problem and will respond shortly."
Right now the silence is deafening. There isn't anything at the Epson site addressing this issue at all, and there is no way to follow up on it from the page addressing Snow Leopard compatibility.
Poor show, Epson.

Colours do not Print correctly with Photoshop CS4

I am using the Adobe Master Collection CS4, and use an Epson RX650 printer, but for the life of me I cannot get Photoshop to print what is on the screen.
The prints are dark, and no where near the ones on the screen.
I am using genuine Epson Ink, and Premium glossy paper, so as to remove this issue, is this a case of my screen needing to be calibrated?
I have considered buying the Spyde Studio calibrator to ensure that this is correct, (do I need to?) and I have read as much as I can about setting up Adobe to manage the print settings and colours, but still no luck.
My current settings are as follows
In Adobe Bridge, my creative suit color settings are set to Europe General Purpose 2
The in Adobe Photoshop (version 11.0.1) I am selecting under colour management, Document Adoby RGB (1998), Photoshop handles colours, Printer profile is Epson sRGB Colour Space, Rendering intent is Relative Colourimetric, and I have ticked the following boxs, Blackpoint compensation, Match print colours, Gamut warning and Show paper white.
Can some one please advise me?

I too have had problems with prints being much darker than what I see on screen.
Below is my solution which works fairly well for color prints--not as well for grayscale.
I used the huey Pro monitor calibrator purchased only a couple of months back to make my prints look right and be consistent.
1.       Use the huey to calibrate the monitor
2.       From Photoshop (CS4), I select the ICC profile for my Epson 2200 printer and the paper being used. I then set up soft proofing in Photoshop (in the View menu) which allows me to see on screen how the image will be printed. Usually it is a bit darker than I like.
3.       so I adjust the brightness such that in the soft proof view, the image appears as I wish.
4.       There is more yet to do in that you have to set various settings for the print process like letting Photoshop manage colors, setting no color adjustment for the printer. And a few more minor settings regarding the printer
By the way, there is something wrong with the print driver for the 2200 in XP so that when you come to the last screen before printing, the print preview has a very red tint. You simply ignore that since the print has none of that. This is in XP. Possibly Windows Vista has a driver that doesn’t do that.
This has given me good quality consistent prints the first time they are printed—at least on the few I have done since getting the huey

Printing issues with Aperture 3 - color management

I just made three prints of the same images, two with Aperture 3 that turned out very dark and off color, almost as it they were printed without color management or double profiles. I then printed the third by exporting the image to CS4 and printing with the same settings (rendering intend, printer settings and custom printer profile) and that print looks fine. Has anyone else run into similar problems with A#? I did not have this issue with Aperture 2.
Thanks,
Message was edited by: pcalvin

I print on an Epson 2880 with Lyson inks and custom profiles. In Aperture 2 it worked perfectly, with exactly the same settings as for printing Photoshop - using the laboratory prescribed settings:perceptual and no black point compensation in Photoshop, and Adobe RGB Gamma 2.2 in the Print settings.
Using the same profile and settings with Aperture 3, the colours are way, way off - exactly as described.
I then tried with Aperture 3 turning off the Adobe RGB setting, so there was no colour space adjustment in the Print setting. This gave a slightly better result, but rather dead and slightly blue.
I ran some tests with the GretagMacbeth colour chart used in preparing the profiles, which confirmed the above but also shows a lack of sharpness when printing from Aperture 3, and a blue border on three sides of the image - even though the border was set to 0.00. I have checked the printer head adjustments and run the test chart through Photoshop again to verify these are Aperture 3 artefacts.
Unless this is resolved, it renders Aperture completely useless! (I have tried reinstalling printer drivers, to no effect).

Epson 5500 Printing Issues with Photoshop

Similar Messages

Maybe you are looking for