Epson 5800, 6200 printer problems

I have an iMac 24". After downloading Adobe reader 8, I can no longer print out a PDF-file. Some pictures print but not the text.
Some days later there are major printing problems. Both printers ( PS3 ) dosen't print at all. The printers are stopped. When I press the continue button, printing process starts but get stopped again. I have reset the Printers system, checked for the latest printdrivers 1.0, checked USB connections in the systeminformation. How do I choose generic PS3 printer? Can that help or what's the problem?
Thank you!
todor. Thomas Dorch.

Hello, den.thed
This is from my error.log.
Is this helpful to solve the printing problem?
This hint; Hint: Try setting the LogLevel to "debug" to find out more.
Is it something I can do?
Best regards, Thomas Dorch.todor
E [22/Jun/2007:15:24:42 +0200] PID 2488 stopped with status 64!
I [22/Jun/2007:15:24:42 +0200] Hint: Try setting the LogLevel to "debug" to find out more.
I [22/Jun/2007:15:24:42 +0200] Saving printers.conf...
I [22/Jun/2007:15:24:52 +0200] Saving printers.conf...
I [22/Jun/2007:15:24:52 +0200] Printer 'EPL_6200-1' started by ''.
I [22/Jun/2007:15:24:52 +0200] Started filter /usr/libexec/cups/filter/pstops (PID 2492) for job 12.
I [22/Jun/2007:15:24:52 +0200] Started backend /usr/libexec/cups/backend/usb (PID 2493) for job 12.
E [22/Jun/2007:15:24:52 +0200] [Job 12] Unable to open USB Printing Class port: No such file or directory
E [22/Jun/2007:15:24:52 +0200] PID 2493 stopped with status 64!
I [22/Jun/2007:15:24:52 +0200] Hint: Try setting the LogLevel to "debug" to find out more.
I [22/Jun/2007:15:24:52 +0200] Saving printers.conf...
I [22/Jun/2007:15:25:11 +0200] Job 12 was held by 'thomasdorch'.
I [22/Jun/2007:15:25:13 +0200] Job 12 was released by 'thomasdorch'.
I [22/Jun/2007:15:25:15 +0200] Saving printers.conf...
I [22/Jun/2007:15:25:15 +0200] Printer 'EPL_6200-1' started by ''.
I [22/Jun/2007:15:25:15 +0200] Started filter /usr/libexec/cups/filter/pstops (PID 2497) for job 12.
I [22/Jun/2007:15:25:15 +0200] Started backend /usr/libexec/cups/backend/usb (PID 2498) for job 12.
E [22/Jun/2007:15:25:16 +0200] [Job 12] Unable to open USB Printing Class port: No such file or directory
E [22/Jun/2007:15:25:16 +0200] PID 2498 stopped with status 64!
I [22/Jun/2007:15:25:16 +0200] Hint: Try setting the LogLevel to "debug" to find out more.
I [22/Jun/2007:15:25:16 +0200] Saving printers.conf...
iMac 24" Mac OS X (10.4.9)

Similar Messages

Illustrator cs4 and Epson Stylus R2880 printing problems

I am having printing problems. I am trying to print from my cs4 to my epson stylus photo printer r2880 and am having problem with my picture getting cut off on the left side when I print. The print screen looks perfect but when I go to print, it always cuts off the left edge and the bottom. I tried playing with the x and y's but have no idea what I am doing. Does anyone have this combination of cs4 with the R2880 printer and can help me solve my problem?

Hi Wade,
I have tried playing around with that but I am not sure what I am doing. Here's what it is set at.
On my drop down print screen, i have the size set as US Letter (Sheet Feeder Borderless (retain size).
When I check the 'fit to page' button it actually puts a bigger white boarder around it. The fit to page number says (96.4706%). Shouldn't it say 100%? If I leave it as do not scale I still have a small border around it.
I am not sure about the xy settings. When I have it to 'fit to page' it is:
Top left corner (0,0) Top right corner (0,0)
Bottom left corner (0, .1632) Bottom right corner (0, .1632)
If I have do not scale button clicked:
Top left corner (0,0) Top right corner (0,0)
Bottom left corner (0, -.225) Bottom right corner is (-.3, -.225)
Do these settings look correct? If not, what should my setting say and how can I set it without the setting changing back everytime I open this window.
Thanks for responding,
Celeste

Epson r800 dvd print problems

I've got an Epson Photo R800 printer connected to my imac G5 running on Mac OS 10.3.5. I did loads of research before choosing this printer, and made sure I had the system requirements Epson ask for by checking the Epson and Apple sites. Epson claim this printer will work with OS 10.1.3 and above.
I've run Tech Tools on my computer just to check that it's a happy bunny, and it passed all tests with no problems.
The printer prints photos beautifully, I couldn't be happier with it, but it won't print on CD/DVDs, which is one of the main reasons I bought it.
When I try to print on DVD using the Epson Print CD software bundled with the printer, I get the error message ' Epson printer driver dealing with CD printing is not installed'.
I uninstalled the printer drivers and re-installed them from the original discs, but still got the same problem. I downloaded the print cd software from the Epson site and installed it, but still got the same problem.
I contacted Epson 5 times about this: first, they advised me to take the steps I already had.
Then they showed me the manual print 'work around' which involved ignoring the error message, and this looked hopeful with the printer beginning to make whirring noises, but then another error message comes up saying that the output tray is in the wrong position, which, trust me, it isn't.
Then Epson promised to send me discs which they claimed would solve the problem. When they didn't send anything, I rang again and they sent a disc, but it was for Windows and for a completely different printer.
Then I got mad, because all this had taken 2 months, and I'd lost work because of it. So I rang again (it took an hour and a half to get to speak to someone), and asked to speak to the manager, who sent me the correct disc, of a updated version of Print CD. I installed it, it didn't solve the problem.
Now Epson are saying that I have to upgrade my OS, which, as everything is working fine apart from this, I am loathe to do. I've got Final Cut Pro, DVD Studio Pro and After Effects on there and everything is ticking along fine - I work with Macs and have had bumper problems trying to get these versions of this software to work with a newer OS there, so I'm not keen to muck about with things at home when I'm happy with everything as it is. Also, when the printer's advertised as working with 10.1.3 and above, why should I?!
Has anyone else had problems with an R800 and mac os 10.3.5? Any ideas? This is such a drag, and I fear that if I have to speak to Epson one more time, I may trash the telephone in frustration.

I have tried everything I can think of! Updated to 10.6.3v 1.1, reset printing, searched the forums, prayed, and have just about given up. As posted previously, my other imac that i did not update to 10.6.3 prints fine.
I appreciate all the tips I have received but does anyone else have suggestions? What should I do next? Is this unresolvable? Purchase a new printer??

Epson Photo R2400 printing problems

I'm new to Mac, and I'm having problems printing from Photoshop CS2 for Mac to a brand new Epson Photo R2400 printer attached to my MacPro via the front panel firewire connection. The problem seems to occur with larger files (91mbyte or greater). The printing is interrupted my a "Printer Communication Error" which gives me no other choice but to shut down the print job, which results in my expensive, partially printed photo being ejected from the printer...this is getting expensive, folks...anybody with a solution to this problem? BTW, I downloaded the latest drivers for Mac from the Epson website and installed them, so I don't think it's a driver issue.
Thanks

Wow. I haven't seen that one. I have a 2200 on FireWire on my Mac Pro. But the biggest file I remember printing was 71MB.
Are you by any chance using custom paper sizes? I had a communications problem when I set up a custom paper size that didn't use the printer's margins, a problem I found through Google.
You may also want to inquire on the forums of some high-end printer websites. Here is one forum:
http://inkjetart.com/forum/index.php

Puzzling Epson R1800 4x6 Printing Problem

I have 3 computers: G5 Dual, Powerbook G4 and a MacBook Pro. I print regularly from the G5 to the Epson R1800 in all paper sizes with no problem. I was testing printing from my laptop today and discovered that I can't print 4x6 prints from either laptop. The Powerbook is running the same system software 10.4.5 and the same printer driver. The MacBook Pro running the Intel driver and has the exact same problem. When I try to print 4x6 paper I get an error message that the "media is not loaded correctly." Without changing anything, I can replug the printer into the G5 and it prints immediately without hesitation.
I can print 8.5x11 prints from the laptops, but not 4x6. Since everything is identical on the G5 and Powerbook I am especially dumbfounded. I've tried re-installing the drivers, restarting the computers and the printer all to no avail.
If anyone has any suggestions or possible solutions, I'd love to hear them!
thanks,
Doug
Mac Book Pro, G5 Dual, PBG4 Mac OS X (10.4.5)
Mac Book Pro, G5 Dual, PBG4 Mac OS X (10.4.5)

Hi Tom -
It did work properly with Photoshop, but I'd rather not have to use Photoshop for all of my printing. As far as Lightroom goes, I was using the standard template - maximize size and specifying 4x6 paper. This worked on a mac air, same OSX, same version of LR5, same version of print driver. So, I created a user template on the air, exported it, imported it into my iMac. Still no good. The only workaround I have found is to use a maximize size template, specifiy letter size paper, then align the photo against the left and bottom edges. I also tried uninstalling and reinstalling Lightroom. This did not solve the problem, either.
Also, when I specifiy 4x6 paper, the rulers show the correct dimensions. Everything looks correct, but it seems unable to communicate to the printer that LR is using anything other than letter-size paper. It's getting very frustrating and wasteful of time, paper, and ink, as I sure you can guess.
Thanks again for your suggestions - I appreciate the feedback.
- John

Epson Artisan 1430 printing problems

When using PSE 9 to control printing using a paper-specific ICC profile (as I am used to doing), all output from my new Epson Artisan 1430 A3+ printer had a green cast. This was not a problem when printing the same images to a Canon A4 printer. After trying many variations, I could obtain acceptable output if I had the printer rather than PSE control output with Printer Preferences set to Colour Controls>AdobeRGB.
A review of this printer from what I consider a highly credible source (http://www.photoreview.com.au/reviews/printers/epson-artisan-1430-inkjet-printer) stated that similar results could be obtained with either PSE or the printer controlling output. (Incidently, using another software package to print (Corel PaintShop Pro 4) also gave atrocious results.)
Checking with Espon support, I have the most current version of the Epson drivers.
1) Should I just accept that I need to abandon what is generally accepted as best practice and have the Espon control output rather than PSE
or
2) Do I have a faulty printer?

At times it is possible that due to system/app/printer manufacturer settings we do not get the desired print output. In such cases it is wise to choose printer manages color and then choose appropriate color profile to print with. You can also try printing from Elements Organizer with same settings and check if it is fine.
You might want to read these before trying and knowing more:
http://help.adobe.com/en_US/photoshopelements/using/WS287f927bd30d4b1f-5796c0e112e28b07616 -7fff.html
http://help.adobe.com/en_US/photoshopelements/using/WS287f927bd30d4b1fffab87f12e28a86132-7 fee.html
Hopefully resetting the printer preferences to default and then changing the settings as appropriate like paper type etc should help.
Also found one of the similar discussions with Epson printer for green cast : http://www.pentaxforums.com/forums/digital-processing-software-printing/57695-grey-areas-g reen-epson-stylus-photo-1400-a.html - Do read this as well.
-Garry

EPSON R300 PHOTO PRINTING PROBLEMS

i have an epson r300 printer connected through my wireless router to im imac but when i try to print, all this crazy text comes out rather than what i want.. so im guessing that it is corresponding with the printer to at least some point since i recognises i want to print but thats it? any help is appreciated.

I was having the same problem with my Epson printer. I went on the Epson website and downloaded the updated driver for Intel.

Epson WP-4530 printing problems

I just purchased an Epson WP4530 printer. It works great, wirelessly, with my windows laptop. My ipad recognizes the printer, but when I try to print, I always get a paper jam/paper out message. There is no jam and there is paper! Please help as I purchased this printer to use specifically with my ipad!

Hi Jo,
I have the same problem! Did you find resolution?
Alka

Lightroom, OS Mountain Lion and Epson 7880 large print problems

I have used Lightroom to beautifully print many 20x16, 24x20 and 24x36 prints on my Epson 7880.
I have been trying unsucessfully to print a 24x74 panoramic print.
What happens is I geet a 24 x 20 inch blank piece of paper come out of the printer, a huge waste of expensive paper!!
I have set yp a custom paper size and the image looks like it fits the dimensions perfectly from the LR print module. All looks perfect.
I am using OS Mountain Lion and LR4. Any suggestions would be greatly appreciated.

http://support.apple.com/kb/DL1398

Printing problems with CS5 and Epson Photo R2880 printer

I'm having problems getting good prints when using Photoshop CS5 with my Epson Photo R2880 printer, problems I never had with CS4. Here's the situation:
If I take a PSD file and print it using CS4, everything works out perfectly. But if I take that same PSD file and print it out using CS5, the print is now offset top to bottom, as well as left to right, along with a 1/8" black strip being printed down the right edge of the paper. As far as I can tell, everything is set the same.
I've compared all the print information found in the Print dialog summary box between CS4 and CS5 and everything appears to be the same. I've verified that I'm using the latest print driver with my printer, and I am. It's 8.27. I've verified that I've checked off the box to center the print to the paper, each time I've made a print. And in trying to figure out what's going on, I've discovered that this problem occurs with any paper size when using CS5, but not with CS4.
I'm stumped and frustrated and without any more ideas as to what I should do next, except to always print my projects using CS4. If anyone has an idea for me, please let me know! Thanks!
P.s. I'm new at using this forum, and though I thought I sent this out once already, I never saw it posted. If I'm in error and it's already out there, sorry for the mistake and posting it twice.

>"Unfortunately then I'd have to say all bets are off. The only true test is to print with the standard materials that Epson has designed their printer for. Only if that works well should you be trying third-party materials. For example, third-party inks in general are of poorer quality, are inconsistent, clog more, and in the long run, do not save you anywhere the amount of money they advertise over the genuine Epson products."
Getting very nice results with an R1800, Inkjetfly CIS, and Red River paper. The R1800 has never had Epson ink run through it and has no abnormal clogging problems. In fact, clogs are rare.
Getting near perfect matches to the monitor with both Colorvision and x-rite calibrating/profiling equipment. The printer stays on 24-7 so the only ink used, other than printing, is a periodic nozzle check. I am not alone in this, so blanket statements like the above are specious at best.
And no, I don't sell prints for big bux, so whether they are going to last a hundred years is not a concern. Besides, until someone is around long enough to verify those claims, the jury is out. I've got color prints from the wet days that are fading after 20+ years. Third party inks are not necessarily lower quality than OEM. One of the reasons for the development of high quality third party inks was the dissatisfaction of B&W and fine art printers with the OEM products.
Of course the cheap refilled/knockoff carts being hawked on ebay and the like are a different story.
MBP, OS 10.4.11, CS3 10.0.1, R1800 with latest driver

Printing problem in cs5 and imac 27

I have been running my Epson Stylus Pro 4800 on a macbook pro and cs3, for a couple of years with no problems whatsoever. I have now upgraded to a new iMac 27"and have had nothing but problems with the 4800. I have made my own profils and used Epson paper profiles but the prints are not as colourful as they used and totally wrong as well. I am also getting totally oversized prints compared to what image seize in ps is set to be.....for example, I have been doing a 10x21 test picture on Premium Lustre paper (photoshop is managing the colours through CS5, but it is printing the image at least 1,5 the size that it should be. All my settings are correct, dpi is 300, I'm printing at 1440dpi resolution on the correct profiles for the paper. I am at a loss to understand why this is happening. Is anyone able to assist me?
I can do the printing in preview and that is looking quite ok. But trough photoshop it is bad colors and wrong size on the print.
Regards Ulfja

I saw you're having a printing problem with CS5 while using an Epson printer. I'm having a problem too. Read my situation and see if you think it's similiar to yours. I posted this about an hour ago but have not heard from anyone yet.
I'm having problems getting good prints when using Photoshop CS5 with my Epson Photo R2880 printer, problems I never had with CS4. Here's the situation:
If I take a PSD file and print it using CS4, everything works out perfectly. But if I take that same PSD file and print it out using CS5, the print is now offset top to bottom, as well as left to right, along with a 1/8" black strip being printed down the right edge of the paper. As far as I can tell, everything is set the same.
I've compared all the print information found in the Print dialog summary box between CS4 and CS5 and everything appears to be the same. I've verified that I'm using the latest print driver with my printer, and I am. It's 8.27. I've verified that I've checked off the box to center the print to the paper, each time I've made a print. And in trying to figure out what's going on, I've discovered that this problem occurs with any paper size when using CS5, but not with CS4.
I'm stumped and frustrated and without any more ideas as to what I should do next, except to always print my projects using CS4. If anyone has an idea for me, please let me know!
I'm sorry I don't have any suggestions for you. The colors I'm getting in my prints from CS5 seem to be alright, but not the positioning on paper. It keeps offsetting and running a black stripe down one side. Fortunately I have CS4 on my computer that I can use to print from, but it shouldn't be this way.
Good luck!

Printing problem with cc and cs6 with epson 7890

Hi everyone,
I am having a serious printing problem. I use CC (14.2.1) and CS 6 (13.0.6) on Mavericks 10.9.1 on an iMac. If I try to make a print on a 24" roll I get an error message: cupsRasterinterpretPDD has an error = page header unsupported values. If I print A2 or A3 sheets everything works fine.
I contacted Epson because I thought it was a printer problem, but they insist it is a photoshop problem. I updated to the latest printerdriver.
Does anyone have any ideas or even better a solution?

I feel your pain, but I don't know the solution, sorry. Our Mac guru who primarily serves designers is not upgrading any of his clients to Mavericks so far, due to printing (and other) issues. Se we're still on 10.8.4 here.
This might help: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03967522
Or this: https://discussions.apple.com/thread/5546441
If those don't help, you might want to post your issue in the Apple Support Communities: https://discussions.apple.com/index.jspa
Good luck. :+)

Printing problem with EPSON printer.

Hi,
When we take print on EPSON printer, some content on the right hand size of paper is not getting printed and that part of paper remain blank.
Setting for the same task have been done as,
1 ) we are printing document using perforated paper of size (35CM x 29CM) on EPSON LQ-1070+ printer.
2 ) We have added custom page-format for size 35CM X 29CM in custom device type ZSAPWIN (copy of SAPWIN) and using the same for printing.
Do we need to maintain any setting in windows ?
Please guide.
Thanks in advance,
Amit Raut

Hi Amit,
Have you checked by printing Word document on same printer??...
If the right part of the paper still left blank, then margin setting of the printer in windows has problem,
Otherwise check it in SPAD only.
Also check your Margin settings at printer.
Regards,
Audy

Problems getting Epson RX420 to print

I have just bought the MacBook Air
My Epson RX420 is installed & i can scan & do a print test but when i try to print a word document i get this message
Your printer may not be set up correctlyor there may be a problem with network connection. You may need to adjust your printer settings.
The scanner is working fine. any ideas anyone
Thanks

Your problem sounds similar to a problem I was having with my Epson WF 630 printer. Basically, I could manage the printer, I could fax, I could scan, and I could print a test page from the management tool, but I couldn't print a file. You might check your console logs to see if you are getting a message which ends in ...rastertoescpii failed, when you try to print. If you are getting that message, you might try the workaround I came up with. It is documented at the following link:
https://discussions.apple.com/message/18616149#18616149

CS 3 Epson R2400 printing problem

After recently migrating from Tiger to Leopard I reinstalled the driver software for my Epson R2400, and have been having CS3 printing problems ever since.
The project I'm doing print work from involves CMYK versions of greyscale photos and a spot color (Pantone 200PC, also tried Trumatch 5-a2).
If I try to print from InDesign, or from Acrobat using an InDesign "press quality" pdf, everything's 'thin'. The greyscale photos are a bit washed out, and the spot color is pink rather than rich red.
If I export a jpg from InDesign and print from Photoshop the quality is acceptable
If I export a jpg from InDesign and print from Lightroom the quality is acceptable
InDesign's color settings are-
RGB: sRGB
CMYK: Sheetfed Coated V2
Can anyone help? Many thanks.

If you have a computer that runs Tiger you should stick with Tiger. CS3 was written under Tiger and seems to work best in Tiger. Use the backup of your system drive you made before upgraded to leopard as you can't go back with an Archive and install. The bells and whistles in Leopard are not worth the stability Tiger offers.

Epson 5800, 6200 printer problems

Similar Messages

Maybe you are looking for