Epson 820 set-up with imac os x 10.1 problems

when i load the epson 820 disc, message says "installation cannot be completed, shared library error:@,director 7.0, resource:,InterfaceLib>" what is going on here?

Hi atldad
Welcome to Discussions.
Do you have OS 10.1.3 as that appears to be the minimum OS X version supported by the Epson 820?
The Printer Driver v1.6aA for OS X 10.1.3 to 10.2.6 is available here. Click on the driver suitable for your OS as there are also one's for Tiger which would be no good to you.
If you are using the correct drive, then I suggest you perform a check and correction if necessary of the disk's file structure, using your OS X Install disk.
The procedure for that is as follows;
Insert the Install Disk 1 into the drive and then select Restart; when you hear the chime hold down C key until the apple logo appears.
This will take you to the installation software, but you do not want to install.
Select your language, then go up to the top menu bar to Installer and navigate to the Disk Utilities application.
Select the start up drive, then follow the instructions in the First Aid pane where you can click on Repair Disk.
If it finds errors, repeat the process until it reports no errors.
After these repairs, quit the application, and restart normally.
Once restarted normally run Repair Permissions. from the Disk Utility application found on your hard drive in Application/Utilities.
regards roam

Similar Messages

  • After 10.6.8. Quicktime movies on my website won't play.  Others on iMac, ipad even PC no problem.  There is no way to install other version as they are all earlier.  Message says I may need to install additional download?  What?

    HELP!  I have a MacBook Pro purchased 12/10. My website has two quicktime movies embedded.  After 10.6.8. these website movies will not play on my computer.
    NO ONE Else has the problem.  I can play the movies from a file on my MacBook Pro purchased 12/10.  Movie works on my ipad and iphone.  Friends with iMac, PC etc. have no problem. ANy ideas?  My website can't open them on my computer.  I suspect there is lots of security stuff that is preventing the open.

    http://208.64.141.26:8081/muzmark_test.mov
    Nothing opens when that URL is opened in QuickTime Player.
    True "Streaming" files require hint tracks be included in the file.

  • Problems setting up my TC. Have just bought new iMac(OS 10.6.8) and  TC. I set it up. iMac cannot find it. I have tried direct connection with an ethernet cable to Mac or my wireless router but nothing. Just a flashing orange light. Help for a simpleton p

    Problems setting up my TC. Have just bought new iMac(OS 10.6.8) and  TC. I tried to set it up. iMac cannot find it. I have tried direct connection with an ethernet cable to Mac or direct to my wireless router but nothing. Just a flashing orange light. Help for a simpleton please. Have tried reseting TC, but to no avail.

    Just updated from 10.6.7 ---> 10.6.8 and had the same issue. Despite having done a clean install from 10.6 and got everything back off my TC, now Time Machine can't find it!
    Green light is on, ethernet cable conected, network CP says its conected but nothing. Airport Utility can't find it. Hit reset button, Orange flashing light but still no show in Airport Utility.
    But I know its there, as rebooting from 10.6 SL disk shows the backups are still ok?
    Hmm, ideas anyone?
    SBB

  • How do I set up my Imac after adding a SSD along with my existing HD

    How do I set up my Imac after adding a SSD so that my system and apps are on the SSD and everything else is on the HD?  I am using mountain Lion.  I want to make sure I can still do Time Machine backups. 
    I was planning on first formatting the SSD and then using Migration Assistant to copy the System and the Library and the Apps over.  Where it gets confusing is the User account where some of the items will be on the SSD but I want all my folders to be on the HD.  Do I just not copy over that other stuff and once I restart from the SSD it will know where all the folders are?  Is there anything I need to know about setting up a time machine backup after that?  Will the backup I had from the one drive have to be erased and start a whole new backup?
    I just want to do this right so I don't have some major problems.
    Thanks for any help.
    Michael

    time machine backed up your whole system data/everything in time machine hdd.
    you want to use ssd over hdd so you need to put new mac os x in ssd.
    then copy all the stuff that you want to put in ssd.
    from my point of view put the mac os x and other application in ssd and leave other data in hdd.(music,movies,etc....)
    more info about time machine : http://support.apple.com/kb/ht1427

  • Where can I get epson scan setting for a TX700W

    I need to get an 10.10 version of the epson scan setting to connect to a epson TX700W scanner. I have downloaded the latest print drivers and printing is all ok. But I cannot remotely scan from the printer. The Printer is on the network and is not connected via usb to my imac.
    Any ideas. Many Thanks
    Paul

    Looking at the Epson Website, they claimed there was a TX700W Image Capture Architecture (ICA) driver and it was listed with the PX700W.
    However, the Yosemite page does not indicate the TX700W has any drivers, but they do list the PX700W.
    http://esupport.epson-europe.com/ProductHome.aspx?lng=en-IE&data=YZnBT5wk60aGGnp hCGjXLhYsymgyi6olDcRGOXo1vy8U003D&tc=7

  • Dual Monitor with iMac?

    I have a iMac from early 2009 and wanted to use it as an external monitor for my laptop which has Windows 8.1 as it's OS. So my question is without using any software such as Synergy, Air Display, etc is there anyway I can make the iMac an external monitor for my laptop. I also have boot camp set up with Windows 7 as it's OS and I'm not sure if that's any help or not making this dual monitor setup work. 
    I was going to buy a mini displayport to VGA adapter (iMac (Early 2009) - Technical Specifications says: "Mini DisplayPort output port with support for DVI, VGA, and dual-link DVI via adapter," so I am assuming I cannot use HDMI) and use that to connect my laptop and the iMac together. And so I was wondering if that'll work out if I'm on windows partition in boot camp or not.
    iMac Specs: iMac (Early 2009) - Technical Specifications
    Laptop Specs: http://www.asus.com/Notebooks_Ultrabooks/N56VM/
    Any help would be appreciated, thanks.

    Can't do it as far as I know. The mini display port on your Mac is for output only. You need a late 2009 or later iMac to do Target Display Mode Target Display Mode: Frequently Asked Questions (FAQ)

  • Problem syncing iPhone4 with iMac 10.6.8

    I was in line to purchase the very first 8GB iPhone in June 2007. Loved the 3GS, and now I'm on the iPhone 4. Have absolutely LOVED the iPhone since the beginning! The Apple syncing was AWESOME. Much improvement (ease of use) over my old Windows Mobile phone, and Blackberry before that, and Palm Pilot before that. However, recently, since the introductino of iCloud, I'm becoming VERY CONCERNED because the syncing is not happening. I use iCal on the iMac and the Calendar app on my iPhone. I do not make calendar entries on my iPad at all. In the past, everything just worked (syncing between iCal on iMac and the iPhone). Everything stayed synced together. If I made an entry on my iPhone calendar, after a sync, it would automatically appear in iCal on my Mac. Any changes on iCal on the iMac would, after a sync, appear on my iPhone.
    I've depended on this behavior for years now, and am very frustrated to learn that some calendar entries are not syncing. I am running the older 10.6.8 on the iMac, so when I tried to turn on iCloud, it didn't work on the iMac. However, it worked on the iPad and iPhone. I ran in to the problem with double entries as I've seen in other posts, and got tired of deleting all the duplicate entries, and eventually decided to turn of iCloud syncing of my contacts and calendars because I need accuracy in these two apps. Can't afford to lose any of my 3500 contacts or hundreds of calendar entries each month. I noticed today that a Feb 22nd doctors appointment was not listed in iCal on the iMac. Checked the iPhone and it was there. Synced the iPhone, and the appointment did not appear in iCal on the iMac. Checked my settings on iPhone and found it was set to iCloud being on (to use the find my iPhone feature) but all syncing to the cloud settings such as calendar, contacts, etc. is turned off. Then checked my iTunes iPhone syncing preferences and found it was set to sync to backup to iCloud. Changed that setting to BACKUP TO THIS COMPUTER instead. Also, checked to make sure that all calendars were selected, and that Sync to iCalendars was checked. Did another sync to the iPhone, and that Feb. 22nd doctor's appointment did NOT copy to iCal on the iMac. It is only on my iPhone. Does anyone know how to turn off iCoud completely (and keep find my iphone feature) and make it sync to my iPhone? I really need the old feature of just being able to sync my iPhone calendar with my iCal calendar on the iMac. Is this still a viable feature? Can it be done without updating the iMac OS?
    My big problem is that I've trusted all my calendar events and contacts to the iPhone and syncing with iCal on the iMac for the past (almost) five years, and I've gotten to where I don't even worry about it because it always just works. Now that I've disovered that it is not syncing calendar entries, I'm begining to wonder if it is not syncing other calendar entries. Also, I'm very concerned about not having a backup. In the past, if anything happened to my iPhone, I was confident that I could buy a new iPhone, sync it to my Mac, and I'd have all my important contacts and calendar entries. Now, I know, if I got a new iPhone today, I would lose this calendar entry, since it does not sync. It goes through the motions, step 1 of 7, step 2 of 7, etc., but this calendar entry is not syncing. I'm wondering what other calendar entries are not syncing.
    Any help with this problem would be GREATLY appreciated!
    If I can't get this problem fixed, I'll be forced to go back to a paper calendar like I used back in the 1990s (unless I can find my old Palm Pilot). Also, I can't just wipe the phone or iCal on the iMac because I have important calendar and contact entries on both and assumed that they have been syncing - but, they have not been syncing recently.
    Thanks VERY much for any help with this issue!!!

    Not sure why you are getting duplicates if you have Settings>iCloud>Calendars set to Off.  But if events added to your phone aren't syncing to iCal on your mac you might want to go to Settings>Mail,Contacts,Calendars>scroll down to the Calendars section and tap Default Calendar.  Here be sure you have selected your mac calendar as your default and not, for example, the calendar under On My iPhone.  If you do change this setting try adding another even to your phone and syincing to confirm that it transfers now.

  • Where can I get an EPSON printer for the original iMac?

    Where can I get an EPSON printer for the original iMac?

    You should look for an Epson Stylus Color 740 or the higher-end 900 or 980, which are about 12 years old now.  All have USB connectivity, and while the 900/980 is a better/faster printer, it's harder to find the ink tanks for it at the usual office supply stores.  Ink tanks for the 740 series seem to be more readily available, without a special order.  There were Mac versions of these printers (the 740i and 900i), with blue/ice housings that were color-keyed to match the fruit-colored "blueberry" iMac and Blue & White G3 mini-tower.  There was no Epson printer that was color-keyed to the original Bondi Blue iMacs.

  • Photos on iPhone in wrong order after sync with iMac iPhoto

    I just purchased my iPhone 6 and am trying to get it all set up with my photos stored on iPhoto on iMac. When I sync phone using iTunes all of images sync over. Not a problem. But here's where the issue is... On my iMac in iPhoto, all photos are displayed correctly with right time and date (along with locations). However, once syncing to my iPhone, a select 6 photos (random ones) are being displayed as taken most recently (yesterday) with wrong location. To be clear, this isn't under events but rather "Moments" on the Photos tab on iPhone.
    What is going on? It looks fine on iMac. I have never adjusted the time and date of these photos so not sure how this is even possible. I'm using iOS 8.1. Thanks for your help!

    My iPhone 4 camera roll decides to rebuild the library every once in a while and everytime this happens, it moves my most refer pictures and places them some where in the middle of the camera roll, making my last pictures I took with my 3Gs the most recent ones showing at the bottom. Small inconvenience but it looks like someone at Apple screwed up in setting up the sequence numbering of these pix and now it's a pain for the end users.
    Has anyone experience the same issue and been able to successfully solve the problem? Please help.
    Thanks

  • When I set up my iMac I used one of two iTunes accounts I have, I now need to change it to the other one......any ideas?! Thanks in advance

    When I set up my iMac I used one of two iTunes accounts I have, I now need to change it to the other one......any ideas?! Thanks in advance

    Hi Pompey Woody,
    Thanks for visiting Apple Support Communities.
    If you need to use a different Apple ID (iTunes Store account) with iTunes on your Mac, you can sign out and then back in with the other account:
    Open iTunes. ...select Store > Sign Out, then select Store > Sign In and enter your current Apple ID.
    These steps are found in this article:
    Apple ID: What to do after you change your Apple ID
    http://support.apple.com/kb/HT5796
    You may also find the information in this article helpful:
    Using your Apple ID for Apple services
    http://support.apple.com/kb/ht4895
    Best,
    Jeremy

  • Is there a way to sync outlook calendars with Imac, Ipad, Iphone calendars.  I am not running exchange server.

    Is there a way to sync outlook calendars with Imac, Ipad, Iphone calendars?  I am not running exchange server.

    hello,
    BlackBerry devices do not support ActiveSync.
    you have several ways, from best to less good :
    1)
    if your company has set up Outlook Web Access, you can use the BIS connection of your device to connect to the Exchange server (email + Address book) through the url of the Outlook Web Access. The OWA needs to be accessible from outside the company.
    2)
    if your company has setup an external link to the exchange server (can be accessible from outside the company), you can configure your BIS directly to the Exchange server (email only if I recall correctly)
    3)
    if your company allows it, on your PC you can setup your email account to automatically forward all incoming emails to a third party email (like GMail or Hotmail), and then configure BIS to connect to that email provider. You will get push email. You can then setup a reply-to: field.
    4)
    use a Windows Mobile phone that has the ActiveSync feature.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Epson LX-300+II with sap

    Dear gurus,
                         I had setup epson LX-300+II with sap with following parameter
                                      Device Type :EPESCP9 :EPSON ESC/ P 9PIN PRINTER
                                      host spool Access method : G:Front End Print with Control Tech
                                      Host Printer:_Default
                       there is a page format which is assign to EPSCEP9.
    Print successful. but it will no print Table and box on the page...Please solve my Issue.....
    Thanks in Advance,
    Regards,
    Snehal Patel

    My guess would be that the device type definition is missing the print controls that you need.
    I don't know that particular printer type but try to look into the device type-dependent print controls defined in txn. SPAD and see if it contains the controls to draw a box etc. If not, then you will probably have to copy and enhance the print control set.
    Hopefully you do have the detailed manual for the printer...

  • Epson scanner not work with Mountain Lion?

    I have an Epson Expressio 1600Pro scanner with transparency adaptor. It has worked perfectly with previous Macs using OSX 10.4. I have recently bought a MacBook pro and upgraded it to OSX 10.8. I went to Epson's website to get a new driver etc. That tells you it can only be downloaded via Mac Software Update. That was duly done and installed. System prefs lists it under printer and scanners. OK
    I have also installed Photoshop Elements 11 and expected to be able to scan direct to there but nothing seems possible. Going to Help says use Image capture or Preview. Yes! there is a small very rudimentary scanning window appears in both apps. Now the problem! Nothing happens. I have tried ALL the various meagre settings on offer, changing size, resolution, custom etc and all that happens is a small rectangle of a scan occurs but no resulting file.
    I have been on to Epson who say ONLY image capture will work with 10.8 but as it is a 3rd party software they can offer no assistance. Well image capture does NOT work. I have spent all afternoon trying various things like restarting, unplugging, reconnecting etc etc nothing.
    10.8 does seem very buggy. I have even had to stop using Mail and Safari simply because it doesn't work whereas Thunderbird and Firefox work very well.
    But I digress, does anyone have any thoughts please?

    The following comments are based on installing an Epson RX700 All-in-one printer/copier/scanner so they may not be applicable to you but, for what it's worth here they are. The RX700 scanner worked perfectly with Snow Leopard and then Lion but, when I changed to Mountain Lion, and used the app store to download and install the drivers, I lost the Epson scanner utility (ie. the user interface that gives you all the scanner options).
    However, if I used System Preferences and then the Print and Scan option, it brought up a small window where I could select either Print or Scan. Selecting Scan or Open Scanner from this window then opens up a window with all the scanner options in it, including an overview scan. This window has the option to either Hide Details (all the detailed scanner options - resolution, size, output file name etc) or Show them. As far as I can see, this window is actually the Image Capture app, although it doesn't say so.
    It might be a long shot but try changing the Auto Selection box in this window to one of the other options (eg. "Detect Separate Items") or setting the "Scan to" to a file.

  • What is the best time to set for my iMac intel to get to sleep?

    what is the best time to set for my iMac intel to get to sleep? the default is 10 minutes, i am changing it to 1 houirs but i put the sleep time for my monitod 10 minutes. is it decent?

    steve359 wrote: The longer it runs, the shorter the expected life (just plain logic),
    but if it MUST run 24x7, then likely one has budgeted for a new system
    within 3 years anyway.
    Not so sure of that "just plain logic." Allowing  sleep too often will cause wear on the drive -- excessive spin up and spin down. Temperature permitting, a drive will last longer if just left running.
    For other hardware, a lot will have to do with the internal temps. When it's quite hot here, I allow the computer to sleep more often. But otherwise, it's a bit of this and a bit of that. I wouldn't personally recommend running 24/7, although I know of several here who claim they do, with no apparent adverse effects over many years.

  • I bought my macbook pro this morning. When I turned it on it led me through set up with voice over. I finally quit VO but my pointer is not working. It moves but does not open anything. Can anyone help?

    I bought my macbook pro this morning. When I turned it on it led me through set up with voice over. I finally quit VO but my pointer is not working. It moves but does not open anything. Can anyone help?

    ladislavfromcygnet wrote:
    Thank you Shootist007. I cannot do even Update now. I probably should have spent the same amount of money on a new IMac!
    No not really. If this is a brand new Macbook Pro take it back for a refund. Apple has a 14 day No Questions Asked return policy for Full refund.
    Take it back, get the Full Refund (DO NOT LET THEM TRY TO FIX IT. YOU BOUGHT A NEW COMPUTER NOT ONE THAT HAS BEEN WORKED ON OR NEEDS TO BE FIXED) and then decide whether to buy another Macbook Pro or the iMac. Or you could return it, get the Full refund and buy some other brand computer.

Maybe you are looking for