Epson 9800 cuts off image

I just got an Epson 9800, and when I print from Photoshop, it cuts off the image drastically. I'm printing a 22" x 3" image to a 24-inch roll of clear film. The printer only prints about 7.75 inches at the right side of the film.
I've got all the latest drivers installed. I also installed Epson's OSX 10.5 common updater and restarted.
My page setup looks good -- I created a custom page size of 23" x 4", big enough to fit the image on the roll with room to spare. In the print dialog box, the paper choice is "roll." The printer shows that it's printing from a roll, autocut. No matter what I try, only about 7.75 inches of the image will print.
Any suggestions to fix this? Many thanks! I'm going nuts.

I've got a little more information on my printing problem. It's not just Photoshop -- the same thing is happening in Illustrator.
But here's the weird part: only SOME image files are getting cut off. I can print one file (a PNG file, say) and it prints fine. The next PNG will be drastically cut off. I can print a vector graphic just fine, and the next one, which is roughly the same size, gets cut off.
For the life of me, I can't find any difference between the files that are getting cut off and the ones that aren't. Suggestions welcome!

Similar Messages

  • Premiere elements 12 is cutting off images after finalizing project

    I have recently finished a music video project and after finalizing the project and saving it down as a wmv. file, I have played back the video and parts have been cut off. I use a lot of green screen keying in my videos and at times the tops of peoples head will be cut off and images aren't aligned the way I had them within the editing program. This is only happening after I save & share the project, but yet everything looks fine in the editing window. No one's heads or limbs are cut off and the back ground images for the green screen effect look fine in the editing window, yet once the project is saved down the background images aren't stretched across the screen like they appeared in the editing program. I don't understand why this is happening and I'm seeking help before I resort to modifying any of my work again.
    Case & point, why is what I see in the editing window different from what I see after the project is finalized? PLEASE HELP!!

    screamindemon
    What computer operating system is your Premiere Elements 12 running on? For now I will assume Windows 7, 8, or 8.1 64 bit in case I need to mention specifics.
    What you describe is probably a mismatch of project settings importing and exports. So let us start with details.
    What have you or the project set automatically for the project preset? (See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio even if they appear to be grayed out.)
    What are the properties of what you are putting on the project's Timeline? Do the properties of the source media match the details of the project preset that you are using.
    Then the most likely cause of the problem...your export settings.
    From what you wrote, you are probably using
    Publish+Share
    Computer
    Windows Media
    Now the important part, what are you selecting for "Presets" and what are your settings under the Advanced Button/Video Tab and Audio Tab of the preset selected?
    The answers will be in your details.
    If you have questions about what is written or need clarification on it, please do not hesitate to ask. But, the answers are need for all of the above.
    Thank you.
    ATR

  • Illustrator CC 2014 - save for web cuts off image

    In Illustrator CC 2014 when I save a vector image with a thick stroke (e.g. 20pt) while using save for web and clipping to the image (so not selecting clip to artboard) and scaling to e.g. 20%, then the edges of the drawing are cut off.
    I'm not completely sure but I think previous versions didn't have this issue.
    If I save the image at 100% no edges are cut off.
    I suppose save for web uses the center of the vector line to determine where to cut off the image if the image is scaled down.
    But it should use the outer 'edge' of the stroke to cut off the image.
    Any ideas to the cause or solution?
    P.S.: Yes, I'm a Windows user ;-)

    I've ticked Edit>Preferences>General>Use Preview Bounds
    That would seem the right way to solve the issue but the problem remains.
    Maybe the origin of the issue isn't because of the centre of the path / artwork size.
    Since there is no problem (with or without "Use Preview Bounds" ticked) using Save for web while scaling at 100% (or higher).
    The clipping only occurs when scaling down.

  • Dynamic Tab Shell Cutting Off Images and Text

    I'm using the Dynamic Tab Shell on a page and trying to get a few image links and output text displaying properly in the Global Toolbar.  I want the image links on the left side of the toolbar and the output text on the right side.  The problem is the images are being cut off and the text is wrapping into a small space and is not fully readable.  The images are 32x32 pixels.  Should I resize them to something smaller?  I tried using smaller images previously, but it seems to just push them down and still cut them off.
    The full output text should be "Logged in as: username", but it's forcing it into a small space and cutting off the username like this:
    Logged
    in as:
    username (this line is not visible in the toolbar)
    Here is my code.  Any help is appreciated.
                <af:pageTemplate viewId="/oracle/ui/pattern/dynamicShell/dynamicTabShell.jspx" value="#{bindings.ptb1}"
                                 id="pt1">
                        <f:facet name="globalToolbar">
                           <af:panelGroupLayout id="pgl5" layout="horizontal" valign="top">
                             <af:toolbar flex="1" stretchId="stretch1" id="tb1">
                               <af:group id="grp1">
                                  <af:commandImageLink text="" actionListener="#{tabmanagement.dashboardSelected}" id="cil1" icon="/images/AsIconDashboard.png" partialSubmit="true"/>
                                  <af:commandImageLink text="" actionListener="#{tabmanagement.toggleSelected}" id="cil2" icon="/images/AsIconToggle.png" partialSubmit="true"/>
                                </af:group>
                                <af:spacer id="stretch1" width="10" height="35" clientComponent="true"/>
                                <af:outputText id="loggedInAsOT" value="#{tabmanagement.loggedInAsText}"/>
                             </af:toolbar>
                          </af:panelGroupLayout>
                        </f:facet>

    Moving the output text from the globalToolbar facet into the globalSearch facet fixed the problems and gave me the intended results:
                   <f:facet name="globalToolbar">
                      <af:panelGroupLayout id="pgl5" layout="horizontal" valign="top">
                         <af:toolbar id="tb1">
                            <af:group id="grp1">
                               <af:commandImageLink text="" actionListener="#{tabmanagement.dashboardSelected}" id="cil1"
                                                    icon="/images/AsIconDashboard.png" partialSubmit="true"/>
                               <af:commandImageLink text="" actionListener="#{tabmanagement.toggleSelected}" id="cil2"
                                                    icon="/images/AsIconToggle.png" partialSubmit="true"/>
                            </af:group>
                         </af:toolbar>
                      </af:panelGroupLayout>
                   </f:facet>
                   <f:facet name="globalSearch">
                      <af:outputText id="loggedInAsOT" value="#{tabmanagement.loggedInAsText}"/>
                   </f:facet>

  • White line cutting off image in Ken Burns effect

    Hi I have multiple layers in a clip-- White background, photo with some white background as well, some text. When I apply Ken Burns to get a little movement, all of the sudden a white bar appears up top and cuts off part of the photo.  Where is this coming from? There's really nothing above the photo that I can see in the layering of all this?  Thoughts?
    Thanks so much!
    ClemKins

    Are you editing inside a clip timeline, or on a project? What are you applying the Ken Burns effect to? The whole clip, the photo?
    Please post a screenshot of your timeline, viewer and inspector, to see exactly what you are trying.

  • Slideshow cuts off images when site uploaded

    check out the error on the published site..maranatha.co.uk
    the slideshow cuts of portions of the images, or sometimes one of the images drops out of the slideshow.
    the issue doesnt occur in design mode.Generally and only generally it occurs in the preview mode, and invariably on uploading the site.
    i move the elements of the slideshow around when i am creating a custom version.. but this cant be wrong to do?.
    i have text on top of each slideshow image usually...again surely this is normal.
    using muse CC
    help! is there any wrinkle with the slideshow widget that i should know about...what can i do to fix this?

    Try the link below. I had a "cropping" problem when trying to use a full page lightbox slideshow. and it was eventually answered here:
    http://forums.adobe.com/message/6128470#6128470
    I hope this helps.

  • Email - Lag,cutting off,images won't show up within email!

    A short while ago,I lost images in my email.Tried a restore,no luck.Deleted/re-entered information,still no luck.Haven't exactly been able to get to the Apple store.I let that go for now.Yesterday,my email started to lag badly.It was maybe 10 seconds between hitting Send and the email actually sending.Now I can't reply to email threads I've had going.The app crashes on me and then I can't mark the email unread without it changing it back to read.I can send out new emails,just seemingly unable to reply without crashing.It's started crashing when I hit Send on replies too.It's an AOL account I've had for a while and nothing like this has happened before.
    I have cleared my Safari history,closed pages in hopes to solve the lag too as well as force closing the app to no avail.

    Hi,
    Welcome to Apple Discussions!
    iLoveRainbows wrote:
    Tried a restore, no luck...
    You said you tried a restore. Have you tried a reset? Press and hold the home and sleep/wake buttons down until the Apple logo appears.
    Hope this helps!

  • Image cut off when printing from snipping tool

    I am using the snipping tool that is part of Microsoft Windows 7. Thank you for your help.

    Hey , Welcome to the HP forums! I understand that you are experiencing issues with cut off images on your Windows 7 PC before printing to your Envy 7640. I can help you with that, however I am not quite sure what program you are using that has your snipping tool. If you let me know what program you are using I can make sure we get you pointed in the right direction to resolve this.

  • Why a long and narrow image (400x2200)mm is cut off while printing on Epson 9880 using Adobe Illustrator?

    Why a long and narrow image (400x2200)mm is cut off while printing on Epson 9880 using Adobe Illustrator?

    3.2 you can make multiple clocks, each clock can have a different alarm.

  • I am running on OSx 10.6.8 using a HP officejet 6000 printer. On a 8.5x11 paper, I cannot print closer than 5/8" at bottom. Images or type cuts off at that point. HP says it's an mac problem. I tried changing evry possible print setting. Am I missing somt

    Running on OSx 10.6.8 using a new HP Officejet 6000 printer. How can I get to within 1/8" on all sides of an 8.5x11 sheet of paper. Images and copy cuts off at 5/8" at bottom. HP says it's a mac problem, not an HP problem. I tried every combination of print settings. Nothing has solved the problem. Have I missed something?

    Yes you are unfortunately you as the consumer are caught in the middle. I totally disagree with what HP told you, they supply the print drivers to Apple, Apple doesn't write printer drivers that I know of. Look in the print settings to see if you can go below 5/8", I know I can with my HP printers (Laserjet 1012, Color Laserjet 2600N, OfficeJet 7410 & OfficeJet 7700 series) so I'm sure the issue is specific to the OJ6000 series.

  • Gallery title text cut off and cover image not updating

    Hello,
    I've been struggling with this for a couple of weeks now, and it's driving me mad. I've been making a book in iBook Author on my iMac (10.10.2). When I preview it in iBooks on the mac it all looks fine, but when I send it to my iPad2 (iOS 8.2), which I do via dropbox, the front cover image reverts to the default for the template I choose, and gallery and interactive widget title text gets cut off (see attached pic) regardless of the size I make it, or the indent I specify.
    I've tried deleting the book several times, restarted the iPad, and whatever I do it still appears the same.
    I'd be grateful for any suggestions.
    Cheers,
    Kev.

    Hi Christine,
    When you say " It's not there when viewed outside of Cp/swf. Using v5.5.l", does that mean this problem only occurs in a specific output?
    Try this -- Go to preferences-- SWF Size and Quality and under customer, uncheck Advance Project Compression, republish the course and check the results.
    Thanks,
    Anjaneai

  • Images at the bottom of the screen are cut off in HDR Pro

    I'm running a Mac and have recently installed CS5.  When I open files to do an HDR, the photos used in the HDR are cut off at the bottom of the screen.  In other words, what I mean is, they should be able to be selected with the check box is being included or not.  Also, the "OK" and "Cancel" buttons are cut off.  I thought that perhaps it was the screen resolution or perhaps the dockeed icons below.  Yet, I'm using the highest screen resolution and that's not a factor. I've hidden the dock,moved it...no difference. I've tried resizing the HDR window but it only resizes horizontally - not vertically.
    This is frustrating.  I'd like to be able to see the entire images being used in the HDR pro and decide whether to include them (or not) by the check boxes; especially since this is how it's supposed to work.  Any ideas?

    Hi Charles,
         Until just now...it didn't work.  Isn't that how it is...ya ask for an answer for something that's broke...then it works.
    When it wasn't working...the Green maximize button didn't do much except allow me to pull the window down further.  Once I would try to resize the window from the resize section at the bottom right, the window would resize to full size...not much good.
    Although...for whatever reason, it seems to be working now.  Will it work tomorrow?  beats me.
    Thanks for yoru help.
    Tony

  • After I covert my excel file to PDF, my images are cut off or not appearing at all HELP?!

    Hello!
    I am creating a Exel Work book and converting it to a PDF file (easy to share online).
    Once I convert the Excel Work book, some of my images are cut off or not appearing at all.
    Which I find weird because some images pop up just fine.
    These images are originally flats from Adobe Illustrator I converted to pictures with Excel.
    So why is that when I convert my workbook to a PDF file some images show through and others don't?
    Please Help!
    ORIGINAL EXCEL FILE
    Once I save it as a PDF File. Other pages are fine except this one?

    Correction for above: 'Bit depth' not ' Bid depth'

  • JPG image shows up fine in layout but a section gets cut off a little at the bottom in exported PDF

    I've got a JPG inserted at the top of the page and there are text boxes below it.  In the layout everything looks fine, nothing is overlapping or getting cut off.  But when I export the image (best quality) as a PDF, a few of the letters in the JPG look cut off at the bottom.  The image looks like it's aligned straight so I'm not sure why it's only showing some of the letters in the middle section look like the bottoms have been chopped.  Any ideas what the problem is and how to fix it?  Thanks!

    urghhh not working still. all of my child folders are in the root folder...sorry for the confusion. the only files in the Template folder are the parent templates. i really don't know what's causing this. i've checked my css file..it's properly linked to the main templates. everything appears perfectly in FF so i'm assuming that if it were a general prob, the pages shouldn't have shown in FF at all. the index pages previews fine in IE and the old pages do as well, except for a few distortions bc i've changed the css rules. but now i also realize that the html file from which created the template isn't showing in IE as well but only in FF so the prob might have started from there but why?? i've checked everything...at least so i think.

  • Text is cut off or disappear in large images

    Issue
    Text is cut off or does not appear on a type layer in large images (e.g.,
    400 MB) in Adobe Photoshop 5.x>.
    Solutions:
    Do one of the following:
    Solution 1
    Change anti-aliasing in the type layer:
    1 Double-click the type layer.
    2. In Photoshop 5.5>, select None, Crisp, or Strong from the Anti-Alias
    pop-up menu in the Type Tool dialog box. In Photoshop 5.0.2, deselect
    Anti-Aliased in the Type Tool dialog box.
    3. Click OK.
    Solution 2
    Move the type layer, open the Type Tool dialog box, click OK, and then move
    the layer back:
    1. Select the move tool.
    2. Move the type layer to the left until all the text is off the image.
    3. Double-click the type layer.
    4. Click OK in the Type Tool dialog box.
    5. Move the type layer back with the move tool. Do not move it back using
    the History palette.
    Solution 3
    Create the text using the type mask tool and fill the selection:
    1. Select the type mask tool and click in your image.
    2. Enter your text in the Type Tool dialog box. Click OK.
    3. Move the type selection to the desired location. If you can see part of
    the text on the existing type layer, you can use it as a guide to position
    the type selection.
    4. Select the layer on which you want the text to appear.
    5. Select a foreground color for the type.
    6. Choose Edit > Fill.
    7. Chose Select > Deselect.
    8. Remove the original type layer.
    Solution 4
    Create the text in Photoshop 5.0 or earlier, or in another application.
    Then, import the text into Photoshop 5.x and remove the original type layer.
    Additional Information
    The type tool cannot create anti-aliased text larger than 8192 pixels on the
    image canvas in Photoshop 5.x, although it can in earlier versions. The type
    mask tool, however, can create selections that exceed this limit. You can
    fill type mask selections to create pixels in the shape of type, but these
    pixels are not editable in the Type Tool dialog box and do not appear on a
    new Type layer.
    (Adobe Tech doc # )

    It has something to do with Segoe fonts in your Windows system.
    Refer to this link from itunesTRK for solution on windows 7:
    https://discussions.apple.com/thread/3782135

Maybe you are looking for