EPSON BX320FW does not work under OSX 10.9 via WIFI

Hi
after my upgrade to 10.9 the printer started to does not work.
I could see the printer, but the status is waiting.
When I try to print, I see the message "Finding a printer", and it failed.
Any idea?

I have a BX535WD and the same problem. Can't even add the printer with 10.9 in normal condition.
Removing printer once you manage to install it works, but after that it can not be re-installed unless you switch off/on the printer. Then you can re-install it and print and scan until you log off from your Mac system.
After that it cannot be found or used until you repeat this procedure.
This is very anoying ...

Similar Messages

Flash player does not work under one user account.

Flash player does not work under one of my user accounts.
My system: I work with a mac mini with Mac OS X 10.6.8.
What I have done:
I installed the flash player maybe one year ago under my "first" user account. At that time this user account had had administrator authorization. In the meantime I had to change this "first" user account in an account without administrator authorization and created an administrator user with which I installed different programms. Lately, the message came up that it would be necessary to update the flash player. I did it; under the "first" user account, but of course with the administrator's password for installing. The installation had been "successful" - so I was told. But it did not run. I tried it again and again. Each time with "deinstallation" first. No way; it did not work.
After asking Adobe for the reason of the problem, they suggested to install the programm directly under the administrator user. I did that (of course after deinstalling under the "first" user account) with the result, that flash player runs under my administrator and my "second" user account, but not under the first user account. There I am always told to update my flash player.
With this result, I talked to Adobe. So they told me to contact the producer of the operating software, since this would be a mistake of the operating software.
And here I am - full of hope to get help from you.
Thanks for reading. And thanks in advance for helping me.
Nanny FS

Any update to provide at all here guys? Again, in my situation, it's very much rights-related as a standard user doesn't even report that the flash player exists when testing it on the Adobe Flash Version Detection website (despite it showing up in Control Panel and under Add/Remove Programs). I've already tried giving the C:\Windows\System32\Macromed and files/subfolders appropriate permissions for the standard user and still nothing. If I either give the user in question full local admin rights or logon as the domain admin, then the Adobe Flash Version Detection website says Flash is installed and Flash works fine.
Thoughts???

Hp scanner software Scan 3 does not work with osx yosemite

The older software called HP Scan 3 does not work with OSX 10.10. Where can I download an update for this software?

Hello @ringie,
Welcome to the HP forums.
I understand that you would like to scan from your Photosmart premium C410 to your Mac 10.10.
I would like to help.
There is currently no updated software.
Try the following work around.
Scanning in OS X v10.10 Yosemite without HP Software
Hope this helps get you scanning.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

My scanner (Epson V300) does not work since mountain Lion upgrade.

My scanner (Epson V300) does not work since Mountain Lion upgrade. I updated the drivers,I can get it to work one time when I reboot the iMAC it will function (scan) one time and than not again until I reboot. Help!!!

Try trick #5, at > Eight amazing Image Capture tricks | Macworld

Nautilus-open-terminal does NOT work under x86_64

I found the latest nautilus-open-terminal v0.9-1
http://aur.archlinux.org/packages.php?ID=5224
does NOT work under x86_64!
There was no open-terminal menu item in the context menu

shaohao wrote:I found the latest nautilus-open-terminal v0.9-1
http://aur.archlinux.org/packages.php?ID=5224
does NOT work under x86_64!
There was no open-terminal menu item in the context menu
I've recompiled almost 40 days ago and i've had no problem at all.
Have you tried logging out before trying?

JCombox does not work under linux (fedora) could you help me???

Hi All,
I am implementing a GUI for a linux application. This GUI works fine under windows system. But the JCombobox does not work under Linux system. Would you help me to solve it? Thank you very much!..
The problem is that I cannot select any other item except the first item in the dropdown box of JCombobox. There is no event generated when I click the combobox, while events are generated for other Buttons.
This problem exists for the following code when I maximize the window. When the window is minimize to some extend in my problem, it is OK.
Here is the simplify code:
import java.awt.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.io.Serializable;
import java.util.Vector;
import javax.swing.ComboBoxModel;
import javax.swing.JComboBox;
import javax.swing.JFrame;
import javax.swing.event.ListDataEvent;
import javax.swing.event.PopupMenuEvent;
import javax.swing.event.PopupMenuListener;
import java.awt.event.*;
import javax.swing.*;
//carmen
import javax.swing.filechooser.*;
import javax.swing.event.*;
import javax.swing.Box;
import javax.swing.BoxLayout;
import javax.swing.border.*;
//import AlwaysSelectableComboBoxDemo.AlwaysSelectableComboBox;
//import AlwaysSelectableComboBoxDemo.AlwaysSelectableComboBox;
import java.io.*;
import java.util.*;
import java.lang.String.*;
public class Test extends JFrame
     private JComboBox jComboBox1;
     private JComboBox jComboBox2;
     private JPanel contentPane;
     private JTabbedPane jTabbedPane1;
     //Main Tab
     private JPanel Main;
     private JPanel OutputSimSet;
     private JPanel Test;
     private JPanel ScriptGenTab;
     private JPanel ResultTab;
//Result Tab
private JPanel SimResult;
     public Test()
          super();
          //initializeComponent();
          contentPane = (JPanel)this.getContentPane();
          jTabbedPane1 = new JTabbedPane();
          Main = new JPanel();
          OutputSimSet = new JPanel();
          Test = new JPanel();
          ScriptGenTab = new JPanel();
          ResultTab = new JPanel();
          SimResult = new JPanel();
     jComboBox1 = new JComboBox(
                    new String[]{"Item 1","Item 2", "Item 3"});
                    jComboBox1.addActionListener(new ActionListener() {
                    public void actionPerformed(ActionEvent ae) {
                    System.out.println("Yeah");
     jComboBox2 = new JComboBox(
                              new String[]{"Item 1","Item 2", "Item 3"});
                              jComboBox2.addActionListener(new ActionListener() {
                              public void actionPerformed(ActionEvent ae) {
                              System.out.println("Yeah");
          // jTabbedPane1
          jTabbedPane1.addTab("Main", Main);
          jTabbedPane1.addTab("ScriptGenerator", ScriptGenTab);
          jTabbedPane1.addTab("Simulation Result", ResultTab);
          jTabbedPane1.addChangeListener(new ChangeListener() {
               public void stateChanged(ChangeEvent e)
                    jTabbedPane1_stateChanged(e);
          // contentPane
          contentPane.setLayout(new BorderLayout(0, 0));
          contentPane.add(jTabbedPane1, BorderLayout.CENTER);
          // Main
          //Main.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
          Main.setLayout(new BorderLayout(0, 0));
          Main.add(OutputSimSet,BorderLayout.NORTH);
          OutputSimSet.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
          OutputSimSet.add(Test, 0);
          Test.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
          Test.add(jComboBox1,0);
          //ResultTab
          ResultTab.setLayout(new BorderLayout(0, 0));
          ResultTab.setBorder(new TitledBorder(""));
          ResultTab.add(SimResult, BorderLayout.NORTH);
          SimResult.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
          SimResult.add(jComboBox2,0);
          // Test
          this.setTitle("Test");
          this.setLocation(new Point(0, 0));
          this.setSize(new Dimension(600, 500));
          this.setVisible(true);
     public void initializeComponent()
     /** Add Component Without a Layout Manager (Absolute Positioning) */
     private void addComponent(Container container,Component c,int x,int y,int width,int height)
          c.setBounds(x,y,width,height);
          container.add(c);
     // TODO: Add any appropriate code in the following Event Handling Methods
     private void jTabbedPane1_stateChanged(ChangeEvent e)
          System.out.println("\njTabbedPane1_stateChanged(ChangeEvent e) called.");
          // TODO: Add any handling code here
     // TODO: Add any method code to meet your needs in the following area
     // TODO: Add any appropriate code in the following Event Handling Methods
     private void jComboBox1_actionPerformed(ActionEvent e)
          System.out.println("\njComboBox1_actionPerformed(ActionEvent e) called.");
          Object o = jComboBox1.getSelectedItem();
          System.out.println(">>" + ((o==null)? "null" : o.toString()) + " is selected.");
          // TODO: Add any handling code here for the particular object being selected
* Create the GUI and show it. For thread safety,
* this method should be invoked from the
* event-dispatching thread.
private static void createAndShowGUI() {
//Create and set up the window.
Test frame = new Test();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.pack();
frame.setVisible(true);
public static void main(String[] args) {
//Schedule a job for the event-dispatching thread:
//creating and showing this application's GUI.
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGUI();
}

package oct03_JCBox;
import java.awt.BorderLayout;
import java.awt.Component;
import java.awt.Container;
import java.awt.Dimension;
import java.awt.FlowLayout;
import java.awt.Point;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JComboBox;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JTabbedPane;
import javax.swing.event.ChangeEvent;
import javax.swing.event.ChangeListener;
public class Test extends JFrame
private JComboBox jComboBox1;
private JComboBox jComboBox2;
private JPanel contentPane;
private JTabbedPane jTabbedPane1;
//Main Tab
private JPanel Main;
//private JPanel OutputSimSet;
//private JPanel Test;
private JPanel ScriptGenTab;
private JPanel ResultTab;
//Result Tab
//private JPanel SimResult;
public Test()
     super();
     //initializeComponent();
     contentPane = (JPanel)this.getContentPane();
     jTabbedPane1 = new JTabbedPane();
     Main = new JPanel();
     ScriptGenTab = new JPanel();
     ResultTab = new JPanel();
//     OutputSimSet = new JPanel();
//     Test = new JPanel();
//     SimResult = new JPanel();
     jComboBox1 = new JComboBox(
     new String[]{"Item 1","Item 2", "Item 3"});
     jComboBox1.addActionListener(new ActionListener() {
     public void actionPerformed(ActionEvent ae) {
          System.out.println("Yeah");
     jComboBox2 = new JComboBox(
     new String[]{"Item 1","Item 2", "Item 3"});
     jComboBox2.addActionListener(new ActionListener() {
          public void actionPerformed(ActionEvent ae) {
               System.out.println("Yeah");
     // Main
     //Main.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
     Main.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
     Main.add(jComboBox1);
     //ResultTab -----
     ResultTab.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
     ResultTab.add(jComboBox2);
    //      jTabbedPane1
     jTabbedPane1.addTab("Main", Main);
     jTabbedPane1.addTab("ScriptGenerator", ScriptGenTab);
     jTabbedPane1.addTab("Simulation Result", ResultTab);
     jTabbedPane1.addChangeListener(new ChangeListener() {
          public void stateChanged(ChangeEvent e)
               jTabbedPane1_stateChanged(e);
     // contentPane
     contentPane.setLayout(new BorderLayout(0, 0));
     contentPane.add(jTabbedPane1, BorderLayout.CENTER);
     // Test
     this.setTitle("Test");
     this.setLocation(new Point(0, 0));
     this.setSize(new Dimension(600, 500));
     this.setVisible(true);
     public void initializeComponent()
//     /** Add Component Without a Layout Manager (Absolute Positioning) */
//     private void addComponent(Container container,Component c,int x,int y,int width,int height)
//     c.setBounds(x,y,width,height);
//     container.add(c);
     // TODO: Add any appropriate code in the following Event Handling Methods
     private void jTabbedPane1_stateChanged(ChangeEvent e)
     System.out.println("\njTabbedPane1_stateChanged(ChangeEvent e) called.");
     // TODO: Add any handling code here
     // TODO: Add any method code to meet your needs in the following area
     // TODO: Add any appropriate code in the following Event Handling Methods
//     private void jComboBox1_actionPerformed(ActionEvent e)
//     System.out.println("\njComboBox1_actionPerformed(ActionEvent e) called.");
//     Object o = jComboBox1.getSelectedItem();
//     System.out.println(">>" + ((o==null)? "null" : o.toString()) + " is selected.");
//     // TODO: Add any handling code here for the particular object being selected
     * Create the GUI and show it. For thread safety,
     * this method should be invoked from the
     * event-dispatching thread.
     private static void createAndShowGUI() {
     //Create and set up the window.
     Test frame = new Test();
     frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
     frame.pack();
     frame.setVisible(true);
public static void main(String[] args) {
     //Schedule a job for the event-dispatching thread:
     //creating and showing this application's GUI.
     javax.swing.SwingUtilities.invokeLater(new Runnable() {
     public void run() {
     createAndShowGUI();
} Try this - you use too many unnecessary JPanels.
Which way you prefer with actionPerformed should work either way.
I think your problem was too many unnecessary Panels and set all attributes before it is added, perhaps,
not add the panel first and then try to set attributes like layout, color, etc...

Huawei e3276 does not work on OSX 10.10 please help

After I installed Yosemite Huawei e3276 does not work on OSX 10.10, please advise any work around for this issue - Thank you

Found a very easy solution online. Just download the software here and install. works immediately.
http://translate.google.com/translate?hl=en&sl=sv&u=http://www.tre.se/privat/kun dservice/teknisk-support/Mobilt-bredband/Uppgradering-modemrouter/Yosemite/&prev =search

Safari scrolling does not work in osx mavericks please solve this issue

safari scrolling does not work in osx mavericks please solve this issue

I know it is a limited topic, but could you provide a little more detail?

[svn:cairngorm3:] 21174: Landmark does not work under complex situations

Revision: 21174
Revision: 21174
Author:   [email protected]
Date:     2011-04-29 11:21:00 -0700 (Fri, 29 Apr 2011)
Log Message:
Landmark does not work under complex situations
https://bugs.adobe.com/jira/browse/CGM-39
Ticket Links:
    http://bugs.adobe.com/jira/browse/CGM-39
Modified Paths:
    cairngorm3/trunk/libraries/Navigation/src/com/adobe/cairngorm/navigation/core/EnterAndExi tInvoker.as
    cairngorm3/trunk/libraries/Navigation/src/com/adobe/cairngorm/navigation/waypoint/Waypoin tHandler.as

Hi John,
1) I like that the new model adds parameterization. It's cleaner than pulling in parameters from pre-set variables. However, the given example didn't actually make much use of it. The only non-constant parameter multiply-used in the example is the "table" variable. Seems like a lot of work for not a lot of gain, at least in this case?
2) I am cautious that this new template/model condenses the paradigm sooo much, that it is no longer clear where XPath is involved vs straight constant tag names. Yes, Adobe's example is overly-expanded but that's common in code meant to be a demonstration.
3) I also am cautious that the example intermingles direct node creation into the XPath search/processing chain. I've learned to be VERY careful with this. It only can work when the changes made do not interfere with the rule processing. In my model, I simply avoid it completely (by not making node-position or node-add/remove/move changes until after tree parsing is complete.) This will always be a safe model.
Bottom line: while I very much appreciate the parameterization and lintability (is that a word? Sure makes sense to me )... I think I would still define each rule separately rather than bring them all together as an inline array in the rule processing call. To me it seems sooo condensed that the XPath meaning can become lost. (Would someone recognize that //para/section-head is actually an XPath statement that could (in another situation) be //para/* or //para/following-siblings::* ... while some of the other strings are exact-match tag names?)
I realize this is all a matter of style... my preference: clarity for the future reader, particularly when the future reader is me a year later who forgot what all those parameters and embedded methods were all about ...
Blessings,
Pete

Epson R2880 printer does not work under 10.6 - how to install 10.5?

Similar to the many problems reported here, my brand new still in production mid-to-high-end printer from Epson does not work. I set aside my Epson 1270 when I realized that they would never support anything that old, but to not support a current expensive model!?!? I would never have bought it except that their web site claims 10.6 compatible drivers. Not true. I can use it as a text printer, but have none of the photo print options that I paid for.
Running on an iMac which I bought just before 10.5 came out. I never loaded 10.5. I paid the big bucks for a full upgrade from 10.4 to 10.6. I have found a 10.5 retail package. Once it arrives, what do I need to do to write 10.5 over the newer 10.6? Do I need to backup and erase everything, reinstall 10.4 and then 10.5? Or is there a reasonably reliable way to just load 10.5?

The easiest fix to this issue that I've found is to just use Sierra's software.
It means you don't get the nice built-in WWAN integration of 10.6, but whatever--it works!
http://www.macupdate.com/info.php/id/25530/sierra-wireless-watcher

SanDisk USB 3.0 Card Reader does not work with OSX Mavericks.

Since updating to OSX Mavericks (10.9) My USB 3.0 SanDisk "ImageMate All-in-One" Card Reader has begun to fail.
It all seems to work proper at first. The memory card shows up in finder and I'm able to browse the files. But when I try to transfer any files it un-mounts from finder and only transfers the first file.
This does not happen under previous OSX versions. I have tried on other computers since, so the card reader is fine.
My USB 2.0 card reader saved my life this time. It works totally fine.
Is this a known problem? Are you guys working on it?

Solved in this post here:
https://discussions.apple.com/message/24016337#24016337

Unzip does not work if osx is integrated in active directory

We have the following problem:
Unzip of zip-files (containing folders) does not work as soon as the osx client is integrated in active directory. The zip-file is located on the windows server file share. The share is mounted over smb to the client. We try to unzip it directly on that share with osx integrated zip / unzip functionality.
If we copy the zip-file to the local file system, unzip works.
If the zip-file contains just files, unzip works.
Under osx 10.8 unzip works. The problem occurs if we use 10.9 or higher.
There is no entry in the system log file.
If we try it with a 3rd party tool (stuffit expander), it works.
Deactivating of all of the domain policies does not solve the problem.
The problem occurs also if we mount the share with domain admin credentials. So there is not a problem with user rights.

I have found the correct answer! After hours of research and chat with Verizon, I know it is operating correctly. Here is why:
If I have WIFI on, Verizon appllications can not be downloaded. So, if you are in the Verizon apps section for programs preloaded on your screen or any applications through Verizon, you can only download using 3G or 4G. If you have WIFI on, you must shut it down to use 3G & 4G networking of Verizon.
Any other downloads, not through Verizon, will download over WIFI. Even though the icons for 3G & 4G are visible when WIFI is active, they are disabled. My problem was reinstalling all the applications originally installed on the phone. To do that, WIFI must be shut down.
So the phone is working properly. I did find someone with Verizon who filled me in on this information. Thanks everyone for your help.

Hp 2727nf printer driver does not work in osx 10.7, hp 2727nf printer driver does not work in osx 10.7

hp laserjet 2727 nf driver in osx lion does not work, It crashes the application and sends an error message?

Hey , Welcome to the HP forums! I hope you enjoy your stay here. I see that you are having some issues with adjusting the power save mode settings on your Laserjet P1606dn. I can help with that. First make sure the printer is plugged directly into a wall outlet and not a surge protector. If the printer is connected with an ethernet cable to a router then you may be able to do this instead:On the printer hold down the button that looks like a sheet of paper with an arrow on it for about ten seconds. This should print out a report.On your Mac open a browser and enter the printer's IP Address in your Address bar exactly as it appears on the page. When you are finished click on enter/return.This will open the printer's Embedded Web Server. In here you may be able to find some options to adjust the power save settings.If the above does not work then this troubleshooting may assist you with the utility:Go to Applications, and if you have it open the Hewlett-Packard folder.Run HP Uninstaller to remove any existing software from you system.On the Mac go to the Apple icon and Sytem Preferences.Open Printers and Scanners.Hold down the Command key and click on the picture of your printer on the left.Click on Reset Printing System.Go to Applications and Utilities.Open Disk Utility.Click on Macintosh HD on the left.Click on Verify Disk Permissions. This should take about ten minutes.Click on Repair Disk Permissions. This should take about ten minutes.Restart your Mac.Plug in the USB cable between the printer and the router.Check for Product Updates on your Mac.Try running the tool again.If this resolves everything please let others know by clicking on Accept as Solution below my post.
I hope this helps and I hope you have a great day!

Canon ScanLide 20 does not work under Snowleopard

I have a Canon ScanLide 20 USB and on the official Canon web site, the driver are not available for Mac OS X 10.6. I finished the complete passage to mac last month with an iMac 21,5" following a Macbook 13,1 unibody, now I am a fully Apple, but now I have some problem with this scanner, the problem with HP laserjet solved reading this forum.
please help me, I download the driver dor MAC OS X 10.4 and canon scantool box run but not perfectly, and the plug in does not work.
How can I solve this problem? who have some ideas?
Thanks in advance for support!
Stè

Hello
My first guess is that an undocumented yet siginifcant change made in 10.6 betrayed your code in open handler.
Try replacing your open handler with this :
on open my_files
repeat with f in my_files
set f's contents to f as alias
end repeat
-- orginal code in open handler here
end open
*Replacement code has three-line repeat block at the beginning of open handler to gurantee the received list - my_files - to be an alias list.
If this change fix the problem, it should be Apple's fault to have let your script fail under new OS.
(Under every Mac OS prior to 10.6, open handler receives a list of alias object(s) from droplet mechanism, whereas under 10.6, it receives a list of some «class bmrk» object(s) of which details have not been documented (as far as I know). And in certain aspects, «class bmrk» object and alias object behave differently, which can break existing script's functionality.)
cf.
Topic : Leopard to Snow Leopard problem
http://discussions.apple.com/thread.jspa?threadID=2204130
Good luck,
H

Getting input from mouse-wheel: does not work under windows/IE

Hi
I have built an applet that extends JApplet. To it I have added a class that extends JPanel implements MouseListener, MouseWheelListener, MouseMotionListener.
I collect input using the method
public void mouseWheelMoved(MouseWheelEvent e){
do stuff...
I have build this on a mac and tested it in firefox and it works fine. But on xp/vista internet explorer, the applet does not respond to mousewheel input. On mac osx /safari it does not work either.
Is there any solution to this problem?
Best regards, Carlis.

Just for luck, try setting the JPanel focusable.panel.setFocusable(true);If that doesn't make a difference, you need to post a [_Short, Self Contained, Compilable and Executable, Example Program (SSCCE)_|http://mindprod.com/jgloss/sscce.html] that clearly demonstrates your problem.
db

EPSON BX320FW does not work under OSX 10.9 via WIFI

Similar Messages

Maybe you are looking for