Epson cx7400 does not print with 10.8.4

Just got a Macbook Pro running 10.8.4. Updated my Epson software but when I try to print I get a message saying "filter failed". How can this be fixed?
Thank you!

Open System Preferences > Print & Scan > Print
Select the Epson printer then click - (minus)
Now go to the Epson site, download fresh drivers for your Epson cx7400
Then back to System Preferences > Print & Scan > Print
Click + to add the printer.
You may also need to delete the print queue from the Print pane.

Similar Messages

My hp 6500a does not print with my laptop running Windows 8.1 (size mismatch)

I am trying to print from a PC running Windows 8.1 to my HP 6500A all in one printer. It will not print anything except 6x4 photos. If trying to print a document on A4 size, I get the message of size mismatch. I tried it on a second PC (again with Windows 8.1) and it still does not print.
This question was solved.
View Solution.

Are these your settings?
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Epson RX620 will not print with my MacBook Pro. Error:/ System/Library/ Pri

I can't get my Epson RX620 to print using my MacBook Pro. It prints fine using my G5 and all info was migrated from the G5 to the MacBook Pro. But I get this error message, Error:/ System/Library/ Pri... can anyone help?

skeeter694 wrote:
I can't get my Epson RX620 to print using my MacBook Pro. It prints fine using my G5 and all info was migrated from the G5 to the MacBook Pro. But I get this error message, Error:/ System/Library/ Pri...
Welcome to Apple's discussion groups.
What's the rest of that error message? Posting what you did is similar to posting as an error message the text "I'm having trouble with ..." with nothing following.
I'd try several things until things work:
1) Open the Print & Fax panel of System Preferences. Right-click on a printer entry and choose "Reset printing system".
2) Delete the entry for your printer, then add it back.
3) Check the Epson Web site for a recent driver for your printer. Download it, then first run it in "uninstall" move, then in "install" mode.
I'll be personally interested in what you learn. I have a relative who has an RX620 and 10.6.4, but I'm not sure he's tried to print anything yet.

Ip8500 does not print with XP & Airport Extreme Base station (OK with Macs)

My canon ip8500 is connected to an Airport Extreme Base station. I can print from either Mac (a G4 and a new iMac 24") but no luck with either XP laptops (accessing the internet is no problem). I've installed both PC's with Bonjour but after a minute or so I get a failed to print message. Any suggestions?

They are simply obsolete. You cannot update their firmware to be compatible with new products. Buy something to replace them such as a couple of new Airport Expresses.

Why will my epson artisan 810 will not print with ipad?

Why will my epson artisan 810 not print with iPad?

Because it is not a Airprint enabled printer.
http://support.apple.com/kb/ht4356

Lightroom 2.5 not printing with main account user but prints with a new use

I have been troubleshooting all day. My new epson r280 is not printing with LR2.5 though it prints in other applications fine. Called epson and we are sure that I have the latest drivers, etc. Called Adobe and they had me create a new user in accounts in system preferences-accounts. When I tried printing from the "test user" LR printed with my epson printer. Adobe said the problem was with my system permissions and I had to reset my system permissions. This doesn't sound right to me. I ran disk utility and repaired my permissions but LR still doesn't print using my original user. Genius Book suggests going to Library-Preferences and to delete the plist. Does this sound right? And do I delete the p-list for LR or for the epson printer? What happens when you delete a p-list? Will I lose my catalog in LR? I would appreciate any help on this problem.

Just trying again to see if anyone has any solutions for this question. Thanks

How can I go back to snow leopard my epson stylus Photo TX810FW does not work with Lion

My Epson Stylus Photo TX810FW printer does not work with Lion how do I go back to Snow Leopard?

Did you try removing the printer from the queue and then reinstalling it?
I attempted to print this morning for the first time after upgrading to Lion and discovered that while everything appeared normal on my Epson printer, it would never print.
I opened System Preference > Print & Scan and deleted the printer.
I then added the printer back and it now working again. Worth a shoot first I should think.
Much easier the a downgrade.
Allan

Error : (does not begin with '%PDF-'. ) when print report in pdf

Hi all,
http://www.oracle.com/technology/obe/apex/apex31nf/apex31rpt.htm
using the example in the above link,
I have created a report and tried to print in pdf format,
But
does not begin with '%PDF-'. this error is appearing when the adobe reader is opening.
Could anyone help me to make out the reason for this error?
bye
srikavi

Srikavi,
Which rendering engine are you using? BI Publisher? Apache FOP? Did you follow the steps outlined here when you configured PDF printing:
http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html
Regards,
Marc

I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan

Hi Everybody,
I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan. How do I uninstall the Epson software and start all over again?
nickel_man_65

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

Can not Print with HP LaserJet 5000 and Epson AcuLaser C9100

I am using MacBook Pro 2.3 GHz Intel Core i7 with Mac OS X (10.6.6)
I already install the latest print driver from the Apple Software Update website.
The driver for HP is Ver. 17.5 & for Epson is Ver. 5.2
I connect two of the printer to my Belkin Surf N300 wireless N Router with ethernet cable.
The error when print to HP LaserJet 5000 is as follow:-
Unable to get printer status (Not Implemented)!
Network host 'x.x.x.x' is busy; will retry in 30 seconds...
This error can stay forever if I do not delete the print job
The error when print to Epson AcuLaser C9100 is as follow:-
Printer not responding
This error can stay forever if I do not delete the print job
Previously I can print with my emac with OS X 10.4.10, but now I can not print with 2 of my printer.
My 2 printer are in good condition, so this is not the printer problem.
Please, do anyone know how to fix this problem fast, because I need to use this two printer for my business.
Thanks in advance.

That is not what Greg needs to know. That is just the way that the IP addresses are assigned to the printers.
Your problem is probably that the printers were probably originally found by AppleTalk. AppleTalk is not included in Snow Leopard. If the printers support Bonjour, they should be found that way. Otherwise, you have to use other methods.
How did you add your printers on the new computer? If you delete them from Print & Fax, how would you add them again?

Elements 11 will not print with Epson R2000?

Cannot make Elements 11 work with new Epson r2000 printer. Prompt on screen states it is not compatible or settings are not correct. Epson tech support worked on it, said to contact without success, said to contact Adobe. Printer works fine on all other applications. Help please.

Thanks again.
Richard
Date: Thu, 12 Sep 2013 08:49:39 -0700
From: [email protected]
To: [email protected]
Subject: Elements 11 will not print with Epson R2000?
    Re: Elements 11 will not print with Epson R2000?
    created by A.T. Romano in Premiere Elements - View the full discussion
Ollie37
Thanks for the follow up.
Barbara Brundage in the Photoshop Elements Forum will probably have the answer to your Photoshop Elements Epson scanner issue. Look into that Twain driver. She will give you good input on all this.
Also, see your other thread about Adobe telephone contact information. I have posted in that other thread also.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5676121#5676121
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5676121#5676121
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5676121#5676121. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

HT3669 My macbook pro does not print through my PC to my EPSON RX 500 after loading OS X 10.7.4. It shows on the print queue "error" However, it will print if I directly connect my laptop to this printer via the USB connection. Any ideas?

My macbook pro does not print through my PC to my EPSON RX 500 after loading OS X 10.7.4. It shows on the print queue "error" However, it will print if I directly connect my laptop to this printer via the USB connection. Any ideas?

It's all about setting up what ever version of windows you have running on your pc to share the printer. If you still get stuck post in a windows forum for help.

My printer does not work with firefox but does work with explorer

While using ebay I tried to print out a mailing label, and fox fire does not work with it anymore. My printer does work with internet explorer ?

What printer? Does the page appear correctly in Print Preview? What happens when you try to print?

My cannon printer worked with snow leopard but does not work with Lion

My Mf 4350d printer does not work with lion Mac OS X Lion 10.7.2., it worked with Snow leopard no problem. I am a novice with apple so can you tell me how to do any changes carefully.

Have you downloaded and installed the latest Canon printer drivers?
http://support.apple.com/kb/DL899

Deskjet D4260 does not work with an ethernet printer server

I am attempting to attach a Deskjet D4260 printer to a home ethernet network using a StarTech PM1115U printer server. The printer has been connected to the network through a desktop computer, and worked perfectly. The printer server will also work with a different printer (Canon i550). However, it doesn't work with the D4260. The server's port will not go online, and it does not appear to recognize the printer.
This occurs regardless of OS (Windows XP, VIsta, 7, and 8 preview all don't work).
StarTech says there is no incompatibility issue with the server and host-based LIDL printers in general or the D4260 in particular. Does anyone know of any issues, or how to get the D4260 to work with this printer server?

Yes, that is how the instructions with the server tell you to install it. The server is connected to the network via ethernet cable and the printer to the server via USB. The server's instructions (as well as those given to me from StarTech support) say to install the printer as a local printer using a TCP/IP port using the server's IP address, which must be on the same subnet as the computer you are installing the printer on. All this I have done. There are a number of settings for the port. It can be raw or LPR and there are other options. I have attached it as instructed, and I have tried both raw and LPR, and tried various other settings. I was able to install a Canon i550 on the server with no difficulties. I was able to print to the printer, and the server, when I accessed it using either StarTech's server management software or a browser pointed to the IP address, showed the server's port on line and identified correctly the printer attached to it. When I attach the D4260, however, it shows the port off line and does not identify the printer. I got this server as a replacement for one that I bought without knowing that, according to its own documentation, it does not work with LIDL orinters. StarTech did not have any such warning, and the StarTech support people said that there should be no problem with a LIDL printer. They told me to consult HP support (to which this forum is the closest thing I can find). It looks to me as if either there is something about the printer that needs to be reset, or the server does not work with this printer. So far changing the driver does something, but not enough to print.

Epson cx7400 does not print with 10.8.4

Similar Messages

Maybe you are looking for