Epson EPL 6200L impossible to print with Bonjour

I [07/Nov/2007:22:16:31 +0100] [Job 171] Adding start banner page "none".
I [07/Nov/2007:22:16:31 +0100] [Job 171] Adding job file of type application/pdf.
I [07/Nov/2007:22:16:31 +0100] [Job 171] Queued on "EPSON_WIFI" by "pk 1".
I [07/Nov/2007:22:16:31 +0100] [Job 171] Started filter /Library/Printers/EPSON/LaserPrinter/GD2/filter/pdftoescpage.app/Contents/MacOS /pdftoescpage (PID 474)
I [07/Nov/2007:22:16:31 +0100] [Job 171] Started backend /usr/libexec/cups/backend/mdns (PID 475)
W [07/Nov/2007:22:16:33 +0100] [Job 171] INFO: tentative de connexion à l’hôte Borne-Apple-N.local. sur le port 9100>>
It seem a problem between the airpot an the printer

Maos wrote:
in terminal, when i type ./configure, i get this error:
checking for C compiler default output file name... configure: error: C compiler cannot create executables
See `config.log' for more details.
Did you install XCode? XCode and therefore the compiler are not part of a default installation. They are on every Mac OS X install disk, but you need to install them separately.
I did get a chance to look at this driver. It does not compile straight away. I had no problem getting the configure script to run, but 'make' immediately had errors.
This is an older package. It looks like it wants to find specific things in a Linux kernel or via libusb. It may be just a matter of installing libusb, but I am not familiar with it to tell you whether that would solve your problems. At this point, I am not sure whether there is an easy fix or whether more complex changes need to be made to the Makefile or code to get it to work in OS X.
If you have had some previous compiling experience, you can try adding libusb and then try 'configure and make'. You also might get some help on the Unix forum _http://discussions.apple.com/forum.jspa?forumID=735_
Matt

Similar Messages

  • HP 1020 vs. Epson EPL-6200L

    Hey all!
    I am looking to buy a simple black/white laser printer and currently I think it will be either HP's LaserJet 1020 or Epson's EPL-6200L.
    I am tempted towards Epson for built-in drivers in Tiger as well as much faster printing (20 pages per minute). On the other hand 1020 has USB 2.0 vs. 1.1 on 6200L, and it a little smaller.
    What would you suggest both printing-wise and Tiger-compatibility-wise?
    Thanks a lot,
    Artemiy.

    Solved! It was probably a permission problem; used to kubuntu I had added my account to sudoers and blocked root so during printer configuration i used my account/password as credentials; even if they are accepted there is a problem with sudo configuration that make it unusable with cups; so root account is necessary. Using root make other settings useless: inserting !usblp in rc.conf, modify device node permission. Adding own account to lp group is enough.
    To use HP scanner add your account to scanner group and uncomment hpaio line in /etc/sane.d/dll.conf

  • Trouble with findig printer with Bonjour (HP all in one printer)

    Hi,
    I have a problem with connecting to my HP Printer.
    When the printer and the iMac is booted freshly I can connect to the printer without any problems, also I can find the printer trought the printer browser via Bonjour.
    But after a while the connection is completely lost with the printer, the only way I can connect to the printer is by IP, the dns name (http://HPxxxx.local.) is also not working anymore.
    The only solution is turning off the printer and putting it on again, even sometimes I have to restart the iMac.
    Is it possible a new installed wireless modem/router is cousing this odd behaviour ? Because it looked like the trouble whas coming after the new router was installed.
    When I ping to the printer I can see there are some timeouts from time to time and when the timeouts take too long, the result is that I can't find the printer trough Bonjour anymore.
    Thanks!

    Hi cowla1, 
    I understand you need the drivers for the HP 6500A on a Mac. I can help you but will need some more information.
    I have provided a link for the drivers up to 10.8. The 10.9 drivers show the documentation to run the Apple Updates for the driver install. HP Officejet 6500A e-All-in-One Printer - E710a Drivers.
    Select your operating system, click next and click on the software to download and install.
    Make sure when you add the printer, it shows the printer name and not the printer name + Airprint.
    What operating system are you using? Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    How is the printer connected? (USB/Ethernet/Wireless)
    Please provide in detail the results if you are still having issues.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Why will my epson artisan 810 will not print with ipad?

    Why will my epson artisan 810 not print with iPad?

    Because it is not a Airprint enabled printer.
    http://support.apple.com/kb/ht4356

  • Hint about Samsung CLP-510N Printing with Bonjour

    After installing with Bonjour in Printer Utility I had a problem with Samsung's CLP-510N that did not appear with a Windows machine on the network. Using this printer, it simply stalls after appearing to start up OK. It just stops part way through sending a page and refuses to continue. It shows stopped.
    I found that if you try to install this printer using Bonjour in the Printer Utility it will not work. However, if you (as per the Samsung instructions) install with IPP (internet printer protocol) in OS 10.4.x there is no problem.
    A nice feature in Printer Utility is that the IP address entry does self-complete and shows what printers' address are as you fill out the line.
    This may be applicable to other printer related issues with Bonjour. Perhaps it's the way I use my resources, but in short I find Bonjour to be totally useless!
    G5 PM 2.0 dual, G4 TiPB DVI 800MHz/1GB, G3 B&W 400MHz Mac OS X (10.4)
    G5 PM 2.0 dual, G4 TiPB DVI 800MHz/1GB, G3 BW 400MHz&   Mac OS X (10.4.5)  

    solved my own problem.

  • New Epson WF 7620 will not print with Macbook Air, receive "Print File Was Not Accepted" message.

    Hello! To anyone who tries to help me, thank you in advance!
    I brought home a new Epson WF 7620 yesterday and did all the necessary stuff, installing it with my Macbook Air (Mac OS X ; 10.7.4.). I installed the software from the site, added the printer to my printer list, enabled "print sharing" and connected it to my wifi network. I am trying to use it wirelessly.
    I tried to print a test page of a regular PNG image, but I am receiving the "Print File Was Not Accepted" message in my printer queue. I have changed the file type a couple times to JPG and PDF but more of the same. I have also reset the printer, and have repaired the disk permissions in the Disk Utility to try and get it to work.
    None of this seems to be working, suggestions very appreciated!
    Thanks
    MP

    Try Linc's suggestion first.  That should cure your issue.  If not, here's something else to consider:
    PrinterMaccer wrote:
    I installed the software from the site ...
    Apple keeps a set of current software for Epson printers.  You should start by going to System Preferences > Printers & Scanners and delete the printer from the list (using the "-" key).  Then download Apple's software version from here:
    Epson Printer Drivers v2.18 for OS X
    Finally, set up the printer as shown here:
    OS X: Connecting a Wi-Fi printer to your Wi-Fi network

  • Epson Stylus Color 1280 not printing with Mac OS X 10.6.8

    I have an Epson Stylus Photo 1280 printer (driver - Apollo P-2100 - Gutenprint v5.2.3) and am running on Mac (OSx 10.6.8)
    It WAS working but recently.... I changed the ink cartridges and it powers up with green light on. Once I try to send a job to the printer it quews up and looks like it is going to print but then the icon suddenly disappears from my desktop and it is cancels the printing???

    krea8iv wrote:
    I have an Epson Stylus Photo 1280 printer (driver - Apollo P-2100 - Gutenprint v5.2.3) and am running on Mac (OSx 10.6.8)
    It WAS working but recently.... I changed the ink cartridges and it powers up with green light on. Once I try to send a job to the printer it quews up and looks like it is going to print but then the icon suddenly disappears from my desktop and it is cancels the printing???
    Did you recently change the driver you are using?  I don't see how a driver for the Apollo P-2100 will work with an Epson printer.  I would suggest that you delete your printer and re-add it using the correct driver.
    You could also use the Epson supplied drivers available at http://support.apple.com/kb/DL1398

  • Epson EPL-5700i won't print

    Just upgraded to an iMac from a G4. I've been troubleshooting w/Epson support and I've already
    reset printers
    reinstalled driver from OSX install disc
    deleted any older Epson preferences, drivers, documents
    switched cables
    turned printer on/off
    Every once in a while the printer will print one page.
    First with an error message - paper size differs from paper tray and would I like to Cancel or Continue Printing and then, after it prints, an error comes up saying A Service Call Error Occurred, and then it won't print anymore. Printer worked just fine w/the G4.
    Any suggestions?

    Do you get an error message?
    What happens when you try to print?
    Is is set as the default printer? Check in control panel>devices and printers.
    Does it fail to print from all applications?
    We need more information from you.

  • Problems setting printer with Bonjour

    I have a recent iMac and a new airport extreme with a Samsung printer plugged into it. My son has a new PC with Windows Vista. He has no problems accessing the internet via wireless through the airport extreme. But unable to print to the Samsung printer.
    He has installed BONJOUR, goes through the set-up, selects the printer etc. and then at the end of the set-up process, he clicks on "finish," at which point he gets a message that "you do not have sufficient access privileges" or something like that. OR, even more often, BONJOUR freezes and he has to do a force quit. In any case, he is unable to use the printer.
    Is there some setting on my iMac that I need to set so he can get through BONJOUR? OR ????

    iSphere:
    Most of the Bonjour discussions seem to be talking about using Airport Drive and Airport Printers (USB drive and printers attached to the Airport Station). In that case I found that the Windows Firewall software is usually the point of trouble: The Firewall on Windows must allow UDP port 5353 for incoming traffic for XP/Vista to recognize the Bonjour printer or drive.
    However, your scenarios is different. I take it that you are trying to share a Mac printer that's directly attached to the Mac. In this case it's really about "File and Printer sharing" on the Mac side, unlikely related to Bonjour.
    Here are my suggestions (I have not tried these yet):
    - On the Mac side, turn on these items through "Sharing" (System Configurations):
    - Windows File Sharing
    - Personal File Shring
    - Printer Sharing
    - Then on "Printer and Fax" configurations, turn on "Printer Sharing".
    Try it and see how far you can get
    Jack

  • How to share printer with Bonjour?

    Does Apple publish detailed instructions on how to share my second computer (Air) by using Bonjour?

    Apple support. I'm not sure it is as detailed as you would like.
    Printer Setup

  • My epson stylist 3880 will not print with Photoshop CC on Mac OS 10.9.3. I've already talked to epson, the printer works with Preview.

    There is nothing wrong with the printer or drivers. Something is wrong with Photoshop CC.   The error box says:
    "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."
    Any suggestions?

    Hello charlottedk, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are having cartridge and printhead problems.  I would like to try and assist.
    I would suggest performing a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also recommend following the steps in this document on an 'Incompatible Print Cartridge' or 'Print Cartridge Problem' Message Displays on the Computer or P...
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Epson xp 202 will not print with wifi

    using os 10.7.3. Can ping printer ok but print box indicates printer off line. Prints ok with usb cable but not with wifi
    cheers

    Fixed.
    Thank you Misery.  As I am juust starting out with Arch I was unaware of PKGBUILD/makepkg system.  You have *greatly* enhanced my Arch experience.
    I am, however, still puzzled as to why I got the 'file not found' message from ldd.  I checked dependencies with objdump and installed the one (old)libjpeg it wanted, but ldd still refused to run giving me 'file not found'!

  • Error 9672 when adding USB printer with bonjour

    I cannot get the printer to be added. Everytime it says an error occured #9672.
    I have done all the suggested options to get the printer to add. It is recognized in the add list, and does everything up to adding it to the network, but the error pops up.
    I have updated airport extreme to the newest version.
    macbook pro   Mac OS X (10.4.9)  

    What is the printer make & model that you are connecting to the USB port of the AirPort Extreme Base Station (AEBSn)?
    You may want to double-check this iFelix site to see if it's compatible with the AEBSn.

  • Impossible to print with Citrix

    Hi,
    We are using Citrix for some of our countries.
    It is possible to print any kind of layout when being connected directly onto the server.
    But we can print anything while being connected to Citrix.
    Error Message is this one : Internal Error (-101) occurred
    I know this message is connected to the fact that there is no default printer but this is not the case in our cartography. Indeed, both servers (SBO and Citrix) do have default printers. In addition, we can visualize the printers from Citrix but can't use the default one connected to the end-users.
    Any other solution?
    Thanks
    Stéphane

    Bonjour Stéphane,
    I worked with a Citrix/SBO environment and there were printing issues that took some time to work out. I don't know how long you've had the Citrix environment set up, but you may find some useful information in the following link:
    http://www.screencast.com/users/RichardDuffy/folders/SAP%20Business%20One%20Tech%20Tips/media/ab7a6666-7a1e-405d-a74b-5bcfb82b9fc7
    The setup I saw, the user's printer settings will be picked up by Citrix and the setup needs to be done properly in order for it to work.
    Hope this helps,
    Heather

  • [Solved] First installation: HP Photosmart C4280 - Epson EPL-4200L

    Hi,
    this is my first post in the forum since two day ago have removed kubuntu and installed arch. Thanks the awesome wiki I was able to configure lvm, wireless, bluetooth, graphics, etc but have great problems configuring my two printers.
    I have installed, as in wiki,
    cups
    ghostscript
    gsfonts
    gutenprint
    foomatic-db
    foomatic-db-engine
    foomatic-db-nonfree
    foomatic-filters
    hplip
    cups-pdf
    have added cups to the DAEMONS array in rc.conf and my account to lp group and edited /etc/cups/cupsd.conf so now I have SystemGroup lp
    **Epson EPL-4200L**
    It's a laser print working on parallel port. Was not necessary add in rc.conf lp, parport, parport_pc modules since they are loaded automatically.
    Obviously neither kde systemsetting printer applet nor cups web interface find my printer. Here some output of dmesg:
    dmesg | egrep -i "parport|lp|epson"
    lp: driver loaded but no devices found
    parport_pc 00:06: reported by Plug and Play ACPI
    parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    parport0: Printer, EPSON EPL-6200L
    lp0: using parport0 (interrupt-driven)
    **HP Photosmart C4280**
    It's a combo (printer/scanner) connected through usb. In lsusb I have:
    Bus 003 Device 004: ID 03f0:5c11 Hewlett-Packard PhotoSmart C4200 Printer series
    I've blacklisted usblp in /etc/rc.conf and changed device node permission. Since:
    ls -l /dev/bus/usb/003/004
    crw-rw----+ 1 root lp 189, 259 2 giu 20.12 /dev/bus/usb/003/004
    have created /etc/udev/rules.d/10-usbprinter.rules and inserted this:
    #HP Photosmart C4280
    ATTR{idVendor}=="03f0", ATTR{idProduct}=="5c11", MODE:="0660", GROUP:="lp"
    LABEL="usbprinter_rules_end"
    usbcore is already loaded so no need to insert it in rc.conf
    Even this printer is unrecognized.
    I have made an attempt using hp tools: with sudo have launched hp-setup and it finds the printer but clicking on "Printer test page" nothing appens; the same from hp-toolbox.
    I need a very big help. Thanks
    P.S. I have added my account to sudoers and disabled root: I don't know if this is important.
    Last edited by gcala (2010-06-04 10:19:58)

    Solved! It was probably a permission problem; used to kubuntu I had added my account to sudoers and blocked root so during printer configuration i used my account/password as credentials; even if they are accepted there is a problem with sudo configuration that make it unusable with cups; so root account is necessary. Using root make other settings useless: inserting !usblp in rc.conf, modify device node permission. Adding own account to lp group is enough.
    To use HP scanner add your account to scanner group and uncomment hpaio line in /etc/sane.d/dll.conf

Maybe you are looking for