Epson ICC profiles will not install in Mountain Lion

I have an Epson R1900 printer which requiress icc profiles. The generally agreed route has been to use those from Epson of America and these work fine on my PC. On the Mac however only the matte set will install. The glossy profiles bring up an error stating that I do not have enough permissions to complete the install. I believe this was also a known issue in Lion and I have found one suggested solution which was to adjust permissions in Colorsync and Profile folders in the Library.
However, in Mountain Lion this did not work for me. Does anyone else have success in installing these profiles?
Previous discussion here https://discussions.apple.com/thread/3319527?start=0&tstart=0

I just used the Pacifist tool to peer into the Oct 4, Epson Printer Drivers v2.12 for OS X package. In particular, for the R1900, both sets of the ICC profiles are installed into the following paths. Supporting code for this printer is installed under the InkjetPrinter2 hierarchy.
/Library/Printers/EPSON/InkjetPrinter2/ICCProfiles/SPR1900_A.profiles/Contents/R esources
/Library/Printers/EPSON/InkjetPrinter2/ICCProfiles/SPR1900_W.profiles/Contents/R esources
The AutoSetupTool is installed in:
/Library/Printers/EPSON/InkjetPrinter2/AutoSetupTool/EPIJAutoSetupTool2.app
Everything in the above paths is owned by root with group admin. The individual R1900 .icc files are read/write by root, read-only by everyone else. There are two categories of .icc files for the R1900 as shown below:
Stylus Pro R1900 A Profiles
Stylus Pro R1900 W Profiles

Similar Messages

HT5022 What works with Mountain Lion? AirPort Utility 5.6 will not install on Mountain Lion.

What gives? The AirPort Utility 5.6 wil not load on a computer running Mountain Lion. Attempted both on an iMac and Macbook.

That is correct, the 5.6 version of the AirPort Utility will not install under Mountain Lion ... but it will run on it once installed. One option is to use a utility, like Pacifist, to extract and "install" the utility into the Utilities folder.

HT5022 Airport Utility 5.6 will not install under Mountain Lion

I have older Base Station Extreme and Airport Express models that need to be looked after; however, the fix to install Airport Utility 5.6 under Lion will not work under Mountain Lion. The installer complains that "the version of Mac OS X on this volume is not supported". So...suggestions?

That is correct. AirPort Utility 5.6 for OS X Lion will NOT install under OS X Mountain Lion. If you had it already installed, and then upgraded, it would have worked just fine.
One option, is to use Pacifist to extract the utility directly from the .dmg file.

I can't print a photo because the ICC profile is not installed. What do I do?

I can't print a photo because the ICC profile is not installed. What do I do?

Try from the Editor "Save As"
Then choose jpeg with sRGB profile.

How to download but not install OSX Mountain Lion on Mavericks

Hi all
I would like to download but not install OSX Mountain Lion on my MBP which is currently running OSX Mavericks.
This however seems impossible. I think OSX Mavericks were already installed on my MBP and therefore it seems "impossible" to download it.
Now, why would I to do this? The answer is quite reasonable, due to certain demands related to an application portfolio I need Mountain Lion, because the portfolio is not upgraded to run on Mavericks. And, it is more reasonable to downgrade a version of OSX, rather waiting for the portfolio upgrade which can take years.
Yes, I need to downgrade my secondary MBP which also came with preinstalled Mavericks. This can be done, if I only could download but not install Moutain Lion.
It should be easy enough; download Mountain Lion, make an installer and make a bootable thumb usb stick. Then erase Mavericks and install Mountain Lion.
I have previously bought Mountain Lion so it is accessible to me in the App Store, but whenever I try to hit the Download button, I get a message saying this can't be done, since I am running Mavericks.
This bugs me, it should be obvious users needs the flexibility to swap whatever OSX version they need. It is still software.
So, how can I download but not install Mountain Lion on my newer MBP that came with preinstalled Mavericks?
I would like to see answers like:
"In order to get this to work, you first have to disable the locking mechanism in [...] " instead of "No, this is impossible to do"
Regards

Thanks for your reply Eric
Can't help wondering thought, people are ok with this?
Basically Apple are saying: "Do not attempt to install an older version of OSX which came preinstalled. If so, expect multiple failures." Really?! Has it always been so? For me it's not like I'm going to install Snow Leopard on my Late 2013 Retina MBP, but I would expect some form of backward compatibility between the previous version and it successor. Apparently this is not possible, and how is this even acceptable?
Personally, I am not going to downgrade, as if I had a choice, but I would and I expected however, the possibility to at least download the previous OSX version. What do you do if you have bought several applications, not necessarily online from App Store and buy yourself a new Mac with preinstalled Mavericks and after installing your "old" applications they fail to work properly? What do you do since downgrading apparently is not an option. So... again, what do you do?
If you don't have friends with an older Mac, you could be facing serious problems. And I'm not talking about gaming, but serious business.
I find this quite disturbing actually, and please tell me it's not so. There gotta be a way to do this?
I simply want to download the OS but I expect some registry values (like windows' registry) keeps preventing this.
It should be possible to simply download and not download and install in one operation, shouldn't it?
Regards

New iphoto11 install will not open in mountain lion

i installed mountain lion and bought iphoto11 from the app store and and after installing iphoto it will not open i just get
Process:         iPhoto [1190]
Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:      com.apple.iPhoto
Version:         9.3.2 (9.3.2)
Build Info:      iPhotoProject-670063000000000~2
App Item ID:     408981381
App External ID: 9487287
Code Type:       X86 (Native)
Parent Process: launchd [130]
User ID:         501
Date/Time:       2012-07-27 07:26:27.502 +0100
OS Version:      Mac OS X 10.8 (12A269)
Report Version: 10
Interval Since Last Report:          40136 sec
Crashes Since Last Report:           109
Per-App Interval Since Last Report: 113 sec
Per-App Crashes Since Last Report:   90
Anonymous UUID:                      098423F8-7034-4F9A-8E49-DE606ED29558
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x00000000ac201000
VM Regions Near 0xac201000:
    __OBJC                 00000000ac200000-00000000ac201000 [    4K] rw-/rwx SM=PRV /usr/lib/libobjc.A.dylib
--> Submap                 00000000ac201000-00000000ac202000          r-x/rwx process-only submap
    __IMPORT               00000000ac201000-00000000ac202000 [    4K] rw-/rw- SM=COW /usr/lib/libobjc.A.dylib
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread

Thanks Doug, I did not know that.
Confrontation was not the intent. Was merely trying to inform the posters that they may get better responses if they posted in the correct forum.

IPhoto will not update after Mountain Lion install

Installed Mountain Lion last week. Running software update results show an update available for iPhoto but iPhoto will not update to the latest version using the APP store update interface.

Have you bought it in App Store or in a disc? If you bought it in a disc, download iPhoto 9.3 and iPhoto 9.3.2. If it has been bought in App Store, delete and install iPhoto

Device Enrolls but MDM profile will not install

We downloaded and installed version 2.7 Zenworks Mobile Management. All certificates verify ok. We are using a GoDaddy cert. We also have a Bretford cart, 30 ipads for testing, we have completed the setup of a VPP account, we have a Mac Mini server with Configurator installed and working, we have setup 5 ipads so far for testing. We have "cloned" them with the Zenworks app pre-installed, we have cloned them without the Zenworks app and installed it manually. They show up in the Mobile Management console under users after they enroll with some information like %battery, OS Version, Memory Capacity but the configuration File will not load, when you try to install it from the Zenworks App, it pulls up safari and pops up the install profile, it says it is Verified, you click install and it pulls up a warning screen about what it will allow the administrator to do and when you select install it just says Profile Installation Failed, Profile Failed to install and you can click OK and it goes back to the Install Profile box again. Any help would be great.

Glad you figured your profile issue out. Quick question on your deployment. You say you are using a GoDaddy Cert and the profile shows as Verified. What version of iOS are you using for your iPads? Did you just use the Godaddy instructions to install your SSL cert? I have been trying to figure out why our profiles show as Not verified for some time. I have been able to figure out that our ZMM is working and can do APN push items with no major issue.
Are you using the Enterprise app for your deployment? (https://zmmupdate.novell.com/apps)
Richard

My epson sx525wd printer will not install/add to printer list on osx lion

I have recently installed osx lion on my macbook and imac and have had a few issues. the most frustrating one is using a new printer i bought, Epson sx525wd which i bought several months ago but hadnt got round to playing with it yet. Maybe my downfall in not installing on Snow Leopard prior to Lion intall.
Anyhow, When trying to add the printer in the printer system preferences panel, both usb connected or wifi, the message that appears is, this printer software is available to download from apple wound you like to download it, i click yes and it says there is not software to download and then wont let me add the printer.
So, i tried downloading the software/drivers and so on from epson, successfully and installed but add printer system preferences panel still asks me to download from software update and again says there isnt any software to download.
So, i tried doing a software update from the apple icon, software update. again no software updates available. Finally i found the CD installation disc that came with the printer thinking i had fool it. to my disappointment i found that the installation software on the disc was not working and said i needed to install rosetta. and to my further disappointment i discovered that lion has discontinued the use of rosetta.....? is this true.
I am unsure what to do...
would it be safe to say that i might have to revert back to snow leopard to install the printer then upgrade to lion again?
can anyone help or at least give suggestions?
Many thanks
Andy

Delete the /Library/Printers/Epson folder. Then try installing the software that you downloaded again. If that doesn't help, you can try downloading the full package of Epson drivers from http://support.apple.com/kb/DL900.
It shouldn't be necessary to go back to SL and then to Lion to get this working.
Hope this helps.

Superdrive will not burn on mountain lion

After installing mountain lion on iMac, superdrive will not burn or recognize cd/dvd. Have tried several different brands and burning software with same results.

If you have a CD or DVD, insert the disk and see what happens. If the drive kicks back the disk or gives you some kind of error message, then it's most likely a hardware issue, and might require a repair. However, if the drive seems to work fine mechanically, then it's a software issue.
http://support.apple.com/kb/HT2801?viewlocale=en_US&locale=en_US
http://www.macworld.com/article/1166312/cures_for_an_uncooperative_cd_dvd_drive. html
Follow these links, and post with your results; others will gain from the info!

IPhoto and iMovie will not open with Mountain Lion upgrade.

Since upgrading to Mountain Lion OS 10.8, my iPhoto and iMovie will not open. I am using a newly purchased MB Air. I re-installed iPhoto from the App Store after trashing my previously installed iPhoto application. IPhoto Library Manager was downloaded as recommended on Apple Support but also will not open. I also tried to trach the iPhoto plist as recommended by a community member. Each application (iPhoto and iMovie) bounces above the dock and message received that application unexpectedly closed. Thank you for any recommendations.

Process:
iPhoto [2167]
Path:
/Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:
com.apple.iPhoto
Version:
9.3.2 (9.3.2)
Build Info:
iPhotoProject-670063000000000~2
App Item ID:
408981381
App External ID: 9487287
Code Type:
X86 (Native)
Parent Process: launchd [140]
User ID:
501
Date/Time:
2012-08-12 14:53:21.268 -0500
OS Version:
Mac OS X 10.8 (12A269)
Report Version: 10
Interval Since Last Report:
5547 sec
Crashes Since Last Report:
26
Per-App Interval Since Last Report: 18 sec
Per-App Crashes Since Last Report:   21
Anonymous UUID:
501D2913-2E99-4E4F-8DDA-9219A5FA4A58
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x00000000ac600000
VM Regions Near 0xac600000:
__DATA/__OBJC
00000000ac5ff000-00000000ac600000 [
4K] rw-/rwx SM=COW /usr/lib/libobjc.A.dylib
--> Submap
00000000ac600000-00000000ac601000
r-x/rwx process-only submap
__IMPORT
00000000ac600000-00000000ac601000 [
4K] rw-/rw- SM=COW /usr/lib/libobjc.A.dylib
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   ???
0xac600000 objc_assign_ivar + 0
1   libobjc.A.dylib
0x945aed47 object_setIvar + 353
2   libobjc.A.dylib
0x945aebda object_setInstanceVariable + 80
3   com.apple.AppKit
0x94cf8461 -[NSNibOutletConnector establishConnection] + 486
4   com.apple.AppKit
0x94cca15f -[NSIBObjectData nibInstantiateWithOwner:topLevelObjects:] + 1002
5   com.apple.AppKit
0x94ca8762 loadNib + 373
6   com.apple.AppKit
0x94ca7d84 +[NSBundle(NSNibLoading) _loadNibFile:nameTable:withZone:ownerBundle:] + 819
7   com.apple.AppKit
0x94ca795f -[NSBundle(NSNibLoading) loadNibNamed:owner:topLevelObjects:] + 256
8   com.apple.AppKit
0x94ca76ec +[NSBundle(NSNibLoading) loadNibNamed:owner:] + 418
9   com.apple.AppKit
0x94ca3688 NSApplicationMain + 447
10 com.apple.iPhoto
0x00010f40 0x1000 + 65344
11 com.apple.iPhoto
0x00010409 0x1000 + 62473
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0   libsystem_kernel.dylib
0x912569ae kevent + 10
1   libdispatch.dylib
0x995e1cc5 _dispatch_mgr_invoke + 993
2   libdispatch.dylib
0x995e17fd _dispatch_mgr_thread + 53
Thread 2:
0   libsystem_kernel.dylib
0x912560ee __workq_kernreturn + 10
1   libsystem_c.dylib
0x967d804c _pthread_workq_return + 45
2   libsystem_c.dylib
0x967d7e19 _pthread_wqthread + 448
3   libsystem_c.dylib
0x967bfcca start_wqthread + 30
Thread 3:
0   libsystem_kernel.dylib
0x912558e2 __psynch_cvwait + 10
1   libsystem_c.dylib
0x967da289 _pthread_cond_wait + 938
2   libsystem_c.dylib
0x967da512 pthread_cond_timedwait_relative_np + 47
3   com.apple.Foundation
0x96299506 -[NSCondition waitUntilDate:] + 404
4   com.apple.Foundation
0x9629932d -[NSConditionLock lockWhenCondition:beforeDate:] + 282
5   com.apple.Foundation
0x9629e880 -[NSConditionLock lockWhenCondition:] + 69
6   com.apple.proxtcore
0x01a3cba2 -[XTMsgQueue waitForMessage] + 50
7   com.apple.proxtcore
0x01a3bb60 -[XTThread run:] + 416
8   com.apple.Foundation
0x9626b318 -[NSThread main] + 45
9   com.apple.Foundation
0x9626b29b __NSThread__main__ + 1396
10 libsystem_c.dylib
0x967d5557 _pthread_start + 344
11 libsystem_c.dylib
0x967bfcee thread_start + 34

External USB drives will not mount under Mountain Lion

Since upgrading to Mountain Lion, two external USB2 drives that I have will not mount and cannot be viewed in the Finder. The same occurs on a 2012 MacBook Air, a 2009 iMac 27 and a 2010 MacMini, all running OS X Mountain Lion version 10.8.2.
Both drives are Samsung Story external USB drives (one is 1.5 GB and the other is 2 GB) and both have been formatted using Mac Disk Utility with a single Mac OS Extended (Journaled) partition, one using Snow Leopard and the other with Lion.
Both still mount correctly on a friends MacBook Pro that is still running Snow Leopard, and I had no problem with the same drives under Lion. Interestingly both can also be connected to Time Capsule USB port and show up correctly.
Both drives mount correctly under Windows 7 on BootCamp partitions that I have on both the 2012 MacBook Air, a 2009 iMac 27. These BootCamp partitions have Paragon HFS+ installed so I can read Mac formated drives.
Both drives show up in Disk Utility, but when attempt to mount the drives I get the message "The disk could not be mounted. Try running First Aid on the disk and retry mounting." I can run Repair in First Aid on the disk and get the message that the volume appears OK, but again have the same problem when I attempt to mount the disk.
I have also tried using Disk Utility 3,2, but still cannot mount the drives, though the program indicates there is no problem with the drives.
I have other portable USB including a Samsung portable USB2 drive, and two external USB3 drives, and I don't have problems with them.
There is clearly a problem with Mountain Lion with accessing (mounting) these Samsung Story USB drives, and the problem appears to be with Mountain Lion itself as the problem did not occur on the same Macs with Lion and does not occur with Bootcamp partitions on the machines.
I have a lot of time searching forums, but I have not found anyone with an identical problem.
I sure hope someone can help or that Apple come up with a fix for this issue which has only developed since the update to Mountain Lion.

bj10au wrote:
Since upgrading to Mountain Lion, two external USB2 drives that I have will not mount and cannot be viewed in the Finder. The same occurs on a 2012 MacBook Air, a 2009 iMac 27 and a 2010 MacMini, all running OS X Mountain Lion version 10.8.2.
Both drives are Samsung Story external USB drives (one is 1.5 GB and the other is 2 GB) and both have been formatted using Mac Disk Utility with a single Mac OS Extended (Journaled) partition, one using Snow Leopard and the other with Lion.
Both still mount correctly on a friends MacBook Pro that is still running Snow Leopard, and I had no problem with the same drives under Lion. Interestingly both can also be connected to Time Capsule USB port and show up correctly.
Both drives mount correctly under Windows 7 on BootCamp partitions that I have on both the 2012 MacBook Air, a 2009 iMac 27. These BootCamp partitions have Paragon HFS+ installed so I can read Mac formated drives.
Both drives show up in Disk Utility, but when attempt to mount the drives I get the message "The disk could not be mounted. Try running First Aid on the disk and retry mounting." I can run Repair in First Aid on the disk and get the message that the volume appears OK, but again have the same problem when I attempt to mount the disk.
I have also tried using Disk Utility 3,2, but still cannot mount the drives, though the program indicates there is no problem with the drives.
I have other portable USB including a Samsung portable USB2 drive, and two external USB3 drives, and I don't have problems with them.
There is clearly a problem with Mountain Lion with accessing (mounting) these Samsung Story USB drives, and the problem appears to be with Mountain Lion itself as the problem did not occur on the same Macs with Lion and does not occur with Bootcamp partitions on the machines.
I have a lot of time searching forums, but I have not found anyone with an identical problem.
I sure hope someone can help or that Apple come up with a fix for this issue which has only developed since the update to Mountain Lion.
You can start here
http://support.seagate.com/kbimg/flash/213059/213059_EN.HTML
Pete

Sony EX1 .mp4 files will not play in Mountain Lion

I have .mp4 files from a Sony Ex1 camera. They are in the correct file structure in the BPAV folder. They will open and play in Quicktime 7 but not Quicktime 10.2. (Black screen, no audio.) They will not preview (black screen, no audio) They will play in the Sony viewer. Of course they will not import into a NLE.
This is what Quicktime 10.2 inspector says:
MPEG-4, 1,920 x 1,080
Linear PCM, 16 bit big-endian signed integer, 2 channels, 48000 Hz
All the files worked fine till I "upgraded" to Mountain Lion
I can play .mp4 files I compressed myself.
Macbook Pro 17"
Mountain Lion 10.8.1

Malcolm J. Rayfield wrote:
>> Do you have the latest (1.2.3) Perian? <<
Perian was installed when my Mac Pro was running OS 10.6 Snow Leopard; but I removed it after installing OS 10.8 Mountain Lion since Perian is not compatible with the new OS.
>> Are you sure the audio in those files isn't AC-3? Perian won't play AC-3 in Mountain Lion. <<
VLC will play the AAC audio files. It reports the following as their codec: MPEG AAC Audio (mp4a) 48 kHz
Incidentally, I get the same results (no audio) when attempting to play the QuickTime audio files on a MacBook Air that is also running 10.8 Mountain Lion. When I boot into 10.6 Snow Leopard on the same computer, the files do play properly in QuickTime Player.

Bridge will not start in Mountain Lion

I originally had this problem with Lion but a reinstall of the system cleared things up. Now since installing Mountain Lion Bridge bounces once in the dock and thats it. There is not even a recognition there was a crash.

So, I've been having a problem very like this and perhaps can offer a bit of insight. At least I found what was going south for me.
My problem looked like this: Start Bridge and there'd be a flicker of a window followed by a dialog with "Bridge is unable to perform this action" (or words to that effect) followed by a crash.
After reading this thread I tried the previously-unknown-to-me OPTION start. That didn't fix the problem but it did eliminate the crash!
Interesting.
Now this problem began for me when I upgraded to Mountain Lion a while ago. After that my system began to become increasingly unstable. When I bought a large SSD to be my system volume I thought it would be a good time to do a clean install of everything.
That went well, actually. Bridge worked in the new account I created! Wonderful! But I needed to use Migration Assistant to bring over my old account which had existed, more or less unchanged, since OS X 10.0! But then I began to have the same kind of instability I had seen before: Finder crashing, Path Finder crashing, and Bridge not working although the other Adobe products including Lightroom 4 worked just fine.
So I poked around and here's what I found: different Groups. In older versions of OS X the user account was a part of group Wheel. This time it was a part of group Staff. Different group numbers. Hmmm. So I started at the top level directory of Users where all the accounts live and I changed the Group, recursively, to Staff.
And then Bridge worked fine and there were no more Finder crashes, at least until I shut down for the night.
So you might want to check both ownership, group and permissions in your accounts and see if this is a part of the probem.
Why Mountain Lion (or maybe even Lion) changed the assigned Group for new accounts I cannot explain although, as I was walking the critters tonight and gazing up at the just-past-full moon, I wondered if it isn't because OS X Server can be installed as a layer over ML and this is a part of that compatibility.
Now I do think that by changing the whole tree heirarchy I may have changed invisible files that shouldn't have been modified. But for right now I'll live with that and see what happens.
Now I just have to try to get Microsoft Office 2011 to install...argh!

Logic Pro 9 will not start in Mountain Lion

I have gotten so much great info here, that I thought this would be the best place to ask my question. I am using a Mac Pro 3, 1 (early 2008). I bought the machine running Leopard, upgraded to Snow Leopard, lion, and Mountain lion with no problems. I have a valid license for logic studio eight and nine. Logic ran without problems… Until I upgraded to Mavericks. After upgrading, my computer started acting terribly. It was much slower, and I would get these terrible freezes where the screen would go kind of crazy flashing colors and stop working completely.
After thinking it was my graphics card, and not wanting to spend $1 million on a new video card, I decided to try downgrading back to Mountain lion.
First, I cleaned off the system drive, and installed mountain lion fresh from a USB drive. The crashing went away and the computer ran much faster and smoother.
However, after reinstalling logic, I am no longer able to start it. As soon as I click on the icon either through Finder or a dock menu, it crashes almost immediately. It has never gotten to or through the part where it scans the plug-ins or anything. I tried to understand the report it generates, and understand the things that it is trying to tell me, but cannot make any sense out of what it is actually saying happened. I have updated the app as well. I am currently at 9.1.8.
I don't know why this is happening, and don't know what the best next step should be. I already have everything moved out of the way if I need to do another fresh install. I was thinking to try a fresh install on a clean drive of Mavericks, and see if anything changes. Also, when I would try to change logic to start in 64-bit mode, there would be no option in the "get info" window to select or deselect 32-bit mode. It simply wasn't there.
I can post specs/logs/error reports of course, but don't even know where to start. Does anybody have any experience with this? Does anybody have a suggestion for where to start? Do I need to get Logic X? (Logic was running fine in Mountain Lion before) I have scoured the Internet trying to find someone with similar issues, but haven't found anything that works. All I have really tried is reinstalling both the OS and the app. Everything else works great in Mountain lion. I still have my Snow Leopard disks if you think going all the way back there would be the best option. My OS is running in 64-bit mode, but when logic does try to start, it says 32-bit mode in the little start up window.
I'm totally comfortable with Terminal, Console, etc, so can provide any info if anybody thinks they may be able to direct me towards a solution.
Thanks for reading and thanks for any help or advice.

kcstudio
Must be my chipset then, although another Mainstage board told me otherwise. (that it was the OS)
When I upgraded my Duo2Core MBPro to Mavericks, I too lost Logic 9.
I'm pretty much done with Logic 9, and pretty happy about the new Logic X, and happy that it works on ALL of my machines.

Epson ICC profiles will not install in Mountain Lion

Similar Messages

Maybe you are looking for