Epson Inkjets -- horrible quality printouts, missing colors w/ Tiger 10.4.3

Ever since the updates to Tiger 10.4, my Epson Stylus C82 inkjet (which has worked perfectly for the past three years) will no longer print all four colors. I'm lucky if I can even get a b/w text print that isn't spotty and missing bands of ink all the way down the page. I've cleaned the print heads so many times I've used up half the ink in the brand new Epson CMYK cartridges I'd installed (thinking the problem was old ink). I also tried using a utility that was often suggested on the discussion boards, called Printer Setup Repair, which I think may have somehow made things even worse.
I decided maybe it was just time for a new printer. To experiment, I borrowed my brother-in-law's brand new unused Stylus C86, loaded it with new Epson ink, and it's even worse than the C82 -- it spools, loads the paper, the print heads make like they're laying down the ink, but it spits out a blank page. I can't even get it to give me a nozzle check confirmation pattern after cleaning the print heads in the Printer Utility. I took the cartridges out, thinking maybe the seal wasn't broken at the tips, but of course, they were (too easy -- wishful thinking).
With both printers I'm using the right Epson inks, the same basic all-purpose ink jet paper I've always used, and I'm trying to print simple one-page tests from Mail, Preview, and Safari, nothing fancy like Quark or Photoshop. This is just so bizarre, I can't imagine what's happened. I haven't been able to get a decent print since mid-September.
I should also mention, I first went through the unfortunately popular issue where Epson Printer Utility does not work with the Tiger-bundled Gimp drivers. And the whole thing where it starts to spool something , then crashes. So I installed Epson's latest drivers and set up those in the Printer Setup Utility. Of course, now I'm having trouble sharing my printer, but that's not exactly an issue, since I can't share a printer that doesn't print in the first place. I'm not sure if these issues are related to the aforementioned strange and hideous print quality, except that it all started happening around the same time after the Tiger updates.
Any info or suggestions would be much appreciated (as well as accounts of similar horror stories).
Dual 2.3 GHz Power Mac G5   Mac OS X (10.4.3)   Epson Stylus C82 and C86 Inkjet Printers

Thank you for replying to my post.
Yes, I can do a nozzle check with the USB unplugged,
and I still get poor results on the C82 and nothing
on the C86. I just can't believe both printers are
broken. The C86 is new, and they were both working
fine previously.
Epsons are notorious for getting their print heads clogged. Run the clean print head routine a few times. If that doesn't work, return the new printer 'cause it's dead out of the box. The old printer, well, once Epson print heads get to a certain level of clogging, nothing will unclog them. Toss the printer and get a new one. Hint: HP and (some) Canon printers put the print heads in the ink cartridges, while Epson and (some) Canons have the print heads in the printers. Machines which have the heads in the carts also have an easy fix for severe clogs: toss the cart. Warning: HP printer drivers stink.
If you don't need colour, you might think seriously about getting a low-end laser.
I just got the C82 to print readably, but still
completely missing magenta and with minimal
fuzziness. This was just dumb luck though, from
letting the printer sit idle for several hours.
It's still clogged. Clean the heads a few times again, or just toss it.
And yes, I've tried setups through the Print & Fax
pref pane, which usually works better than going
through the Printer Setup Utility which tends to
freeze and crash.
I wish I could afford to just buy another printer.
But I'm still worried it's something to do with my
computer, since both printers are having problems
simultaneously, and they're both really good
all-purpose printers.
It's not your machine. It's Epson.
Dual 2.3 GHz Power Mac G5 Mac OS X
(10.4.3)
Dual
2.3 GHz Power Mac G5 Mac OS X (10.4.2)
Dual 2.3 GHz
Power Mac G5 Mac OS X (10.4.3)

Similar Messages

  • Color Management, Photoshop CS3 and Epson Inkjet Printer

    I have been down this road before but here goes again...
    Im using Photoshop CS3.
    Im printing on an Epson Stylus Photo RX680 using Photo quality inkjet paper.
    I know this printer is capable of very good quality prints.
    Thing is I can not figure out the correct combination of color management settings to get a decent print out of Photoshop or InDesign.
    I have read that you are supposed to turn off all printer color management and let Adobe manage the color. Doesnt seem to work.
    I just get overly magenta images that look awful.
    If I let the Epson color management control color I can get a lot closer but the print out is far from accurate or high quality.
    So what the heck IS the correct protocol for printing to an Epson inkjet printer from an Adobe app.
    BTW, I do seem to get a fairly decent print out of something like a PDF which I understand does its own postscript conversion before hitting the printer.
    Is this what my issue is?
    Does Photoshop or InDesign require postscript ripper software to get decent results out of an inkjet printer?

    Have spent hours with both Adobe and Epson support people. I've read several of these forums. Is there an insurmountable problem with CS3 and Epson (2200/2400 are mine)? I have the Leopard patches and upgrade 10.5.4.
    With Photoshop managing the color I get prints that are slightly underexposed and carry a pink cast. Color management is off. With the printer managing the color I get prints that are too green and dark. Epson advice here is to have color management off. There are two other choices for management but to adjust a perfectly balanced print to the printer's whim seem like cruel punishment.
    Have a calibrated monitor and my CS2 works beautifully. Perhaps the best idea is to just go back to CS2 until Adobe and Epson can decide what to do. According to Adobe people, the CS3 gives much of the management back to Epson. According to Epson -- with CS3, you should choose the printer to manage the color (since this seems to be the trend between the two companies) but we users are not happy with the results.
    What is the solution for right now?

  • Every video put into Final Cut Pro exports in horrible quality regardless of format/settings.

    Hello fellow Mac enthusiasts,
    I'm having a problem which may or may not have been plaguing my studio since day one. Every video that we edit in Final Cut Pro exports in MUCH lower quality than it was when it was imported, not only that, the file size of the newly exported video is several times the size of the original. What I end up getting is a file too large for our clients to email around. We recently had a client come into our studio with a flash drive full of 15 second avi's no larger than 900 KB, he wanted a few of them edited together with simple cross fade transitions, and even a few seconds of dead space cut out. He needed them to be the highest quality possible for a powerpoint presentation he may now be unable to give. At first I exported them as Uncompressed avi's, best quality, thousands of colors, and no sound. The resulting file was not only blurrier, but now 260.5 MB!! And that one was with zero edits! The original was 803 KB and crystal clear. So after that I decided to try a few tests. We also produce a bi-weekly hour-long local television show, which looks fine on television but now I'm wondering how much better it could and should look. I've been exporting that out as a Quicktime, Apple ProRes 442 HQ, Interlaced bottom-field-first, zero filters, both compressor native and NTSC 720 X 480. I attempted this method on the client's original 803 KB with zero edits and not only did it export a completely unusable video compared to the original, but it was now 57.1 MB. What is going on here? Is Final Cut conspiring against me? I'm guessing it's something in my settings which I'll shamefully admit I know absolutely nothing about. Could anyone help a struggling video editor do his job?
    Joey

    Hey guys sorry it took me song long to respond it's been a busy week filled with many things not relating to final cut...
    In response to David's post, the original file is indeed larger than 720X480, though it's dimensions are not available to see in the 'more info' associated with the file itself. By comparison, the apple pro res LT file I exported through final cut of the same avi file is 720X480, and looks significantly worse.
    [URL=http://imageshack.us/photo/my-images/87/screenshotofavis.png/][IMG]http://img87.imageshack.us/img87/5421/screenshotofavis.png[/IMG][/URL]
    This was after I created a new project, made the sequence settings into Apple ProRes lt 30p under the audio/video settings in Final Cut, and exported it as the same with 'current' dimensions (it was listed as 850X637, maybe that was the original?) Although I did have to render the original avi itself once it was placed in the timeline. I guess there's no way to know exactly what sort of avi my original file is so I can match my sequence to it? The 'more info' (to be fair im sort of used to 'properties') leaves something to be desired..
    I guess my question is: what else can I change in my settings to leave the quality of the video intact, if anything?
    Thanks everyone.

  • Missing colors in pdf

    When converting pdf from PM, i'm missing colors  in the clip arts. Any idea?  thank you

    [email protected] wrote:
    Sorry, I will  explain my selft in more details.  I'm using PM7 and my publication have 5 clip arts in colors. Those looks good. When I converted to PDF, the process is finished fine, except that the 4 of the 5 clip arts are missing the colors and shown in gray color. I wonder why just one of them is fine and the others failed the conversion. Please help if you have any idea.  The clip arts was copied from free web site clip arts.
    thank you
    Andy
    More details than that please. What file formats are these "cliparts", what color mode are they, are you placing them or pasting them? how are you "converting" to PDF, what PPD are you using?
    Is there any difference in the 4 pieces of "clipart" turned gray and the one that didn't.
    Jay

  • [SOLVED] Is 'epson-inkjet-printer-201212w 1.0.0-7' a safe AUR package?

    Hello,
    I'm new to Arch Linux. I'm wondering if this package ( https://aur.archlinux.org/packages/epso … r-201212w/ ) is safe to use?
    I've read the wiki and I was advised to check the PKGBUILD for any malicious/corrupt code. As I'm not a programmer or such, I don't know very much about programming.
    Here is the PKGBUILD:
    # Contributor: Andre Klitzing <andre () incubo () de>
    pkgname=epson-inkjet-printer-201212w
    _pkgname_filter=epson-inkjet-printer-filter
    _suffix=1lsb3.2.src.rpm
    pkgver=1.0.0
    pkgrel=7
    pkgdesc="Epson printer driver (WF-3010, WF-3520, WF-3530, WF-3540)"
    arch=('i686' 'x86_64')
    url="http://download.ebz.epson.net/dsc/search/01/search/?OSC=LX"
    license=('LGPL' 'custom:Epson Licence Agreement')
    depends=('cups')
    #makedepends=('libtool' 'make' 'automake' 'autoconf')
    source=(http://download.ebz.epson.net/dsc/op/stable/SRPMS/${pkgname}-${pkgver}-${_suffix})
    build() {
    cd "$srcdir"
    tar xzf $pkgname-$pkgver.tar.gz
    FILTER_FILE=`ls $_pkgname_filter*.tar.gz`
    tar xzf $FILTER_FILE
    cd "${FILTER_FILE%.tar.gz}"
    aclocal
    libtoolize
    chmod +x configure
    # if you have runtime problems: add "--enable-debug" and look into /tmp/epson-inkjet-printer-filter.txt
    ./configure LDFLAGS="$LDFLAGS -Wl,--no-as-needed" --prefix=/opt/$pkgname
    make
    package() {
    cd "$srcdir/$pkgname-$pkgver"
    install -d "$pkgdir/opt/$pkgname/"
    if [ "$CARCH" = "x86_64" ]; then
    cp -a lib64 "$pkgdir/opt/$pkgname/"
    else
    cp -a lib "$pkgdir/opt/$pkgname/"
    fi
    cp -a resource "$pkgdir/opt/$pkgname/"
    if [ -e "watermark" ]; then
    cp -a watermark "$pkgdir/opt/$pkgname/"
    fi
    install -d "$pkgdir/usr/share/cups/model/$pkgname"
    install -m 644 ppds/* "$pkgdir/usr/share/cups/model/$pkgname"
    cd "$srcdir"
    FILTER_FILE=`ls $_pkgname_filter*.tar.gz`
    cd "${FILTER_FILE%.tar.gz}"
    install -d "$pkgdir/opt/$pkgname/cups/lib/filter/"
    install -m 755 src/epson_inkjet_printer_filter "$pkgdir/opt/$pkgname/cups/lib/filter/epson_inkjet_printer_filter"
    sha256sums=('822d659ce1c15183a257b0a88b90b3e7ded43071fb7b98cbb5d433be6e298e02')
    Thank you in advance.
    (P.S. Sorry for bad English)
    Last edited by jonasty123dm (2013-07-27 13:02:03)

    karol wrote:Yes, this PKGBUILD is OK.
    Thank you very much for the fast reply

  • Canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors

    canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors
    i have prfiled the mac and printer wiht colormunki and uplodated the profile sucessfully
    i set the printer to correct icc profile
    print out comes out same with glazed colors and missing tones/colors
    however when i use the same printer on windows and with light room, following same icc profile, colormunki calibrated profile, the print our are excellent.
    i have also tried using printer manage profile using the Mac and Aperture and get same poor prints
    can  you please assist and thanks

    I've a Pro9000 and also use Colormunki successfully.
    When I use Colormunki, I calibrate both of my monitors and the printer/paper combination. Colormunki saves the generated profiles to the correct places -- I don't load or change any profiles after that as that would mess-up what the Colormunki had just done for me, and this would likely mess-up the prints.
    Though I double-check the settings in the print dialogue, the choice for the printer handling things is already grayed-out. Colorsync handles it all just fine.

  • Export to movie is HORRIBLE quality!

    Hi, my flash movie looks great when it is in it's .swf format. However, when I use the export to .avi option it comes out as REALLY horrible quality. Exporting to quicktime does nothing. I've been looking online and have only found people having the same problems with no solution. I've tried several conversion programs to just convert the swf to avi, but all of them are bad. They're all great in quality but half are fast by a good 30 seconds in sound and the other half replaces my black background to white! People use flash everyday & obviously overcome such a simple problem! What am I doing wrong!!?

    Hi,
    I'm not totally sure here, but I guess, that Flash uses the video-codecs, that are installed with your OS, so it might just be that the problem lies there. If it is just a one time problem, I might help you by trying to export it myself, as I did not have such problems for a while, if you are looking for a general solution you should offer a little more info about your system and the movie you are trying to convert.
    cheers
    M

  • Horrible quality in media browser

    Hi
    It's a big problem for me : all my movies are encoded with a worse quality at any size. So it's published on .mac gallery with horrible quality. So the problem is in the Media browser export qulity. When I use it in iWeb the problem is the same. Nota: my preferences are PAL, I think it's not the problem. Seomeone can help me?

    OK : I import from DV cam, I make a project, that's look OK, I share it for media browser, and it's awful when I use that in iWeb, .mac gallery, etc.
    http://gallery.mac.com/fabricel#100066
    I opened the package. The video in iMovie project/movie/Movies (the shared movie) is look awful too of course. The dv source in iMovie Events/movie/ is OK, no problem. When I "export the movie", it's awful. If I "export with QT", always with iMovie, it's OK. I think there's a problem with a specific codec of iLife'08.
    Message was edited by: Fabrice LOUVET

  • I recently upgraded to Mac OS 10.8.1.  I had an Epson Inkjet printer (Stylus C88 ) that had seen its better days. I repurchased a refurbished model (C88 ) to replace the old one, simple enough. Since I've done this before, I didn't think I had to install

    I recently upgraded to Mac OS 10.8.1.  I had an Epson Inkjet printer (Stylus C88 ) that had seen its better days. I purchased a refurbished model (C88+ ) to replace the old one, simple enough. Since I've done this before, I didn't think I had to install the CD. I have since discovered the CD isn't recognized on my computer and/or by this Mountain Lion system and that I had to go to Apple to upgrade the new driver for this product, and which I did, but I can't find the epson folder  other than the attached. I just want to place an alias printer logo on my desktop but I can't find it anywhere.   What to do???

    Hi, one question & one suggestion...
    What possible things are connected at home but not at the store, inlude every cable, etc.
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • Firefox crashes or runs but with splotches missing color, how do i fix it?

    when I start firefox my desktop starts flashing on and off and when it returns there are splotches missing color. firefox then either crashes or runs but with the colors muted and images distorted.

    Try to disable hardware acceleration.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    If disabling hardware acceleration works then check if there is an update available for your graphics display driver.

  • EPSON InkJet 4800 Pro, problems, please help!

    I was setting up an EPSON InkJet 4800 Pro on my client's network yesterday, I managed to successfully set it up on the network with Bonjour network, They had two systems running Leopard 10.5 over Wireless, One system running Tiger 10.4 connected via ethernet directly into the modem/router, I managed to download the latest the drivers and install them on these systems, all working great.
    When it came time to install the driver on Snow Leopard, all seemed to work fine, added the printer (seems to have the right version), Though when I print it comes up with the error message:
    "/library/printers/EPSON/inkjetPrinter/filter/raster/rastertoescp.app/contents/M acOS/rastertoescp failed"
    I thought it could of had something to do with Rosetta not being installed, so I made sure it was installed by doing an optional install off the Snow Leopard disc twice, now im stumped and my client is without a printer, if anyone has any solution or advice it'd be really appreciated!
    I have spoken to EPSON continually and they really don't seem to be much help, usually rude most of the time. My next step is to possibly call apple.
    Message was edited by: Sam6190

    Please try resetting the printing system by:
    1. Control-click or right-click a print queue in the ""Printers"" pane.
    2. Choose ""Reset printing system..."" from the contextual menu.
    3. Click ""OK"" in the ""Are you sure..."" confirmation sheet.
    You can follow the troubleshooting steps in the Apple articles:
    http://support.apple.com/kb/HT3669?viewlocale=en_US
    http://support.apple.com/kb/HT3771
    If all of this doesn't work you can see if the issue is with the user account or system wide by creating a new OSX user account and see if that user has the same issue.
    Let me know if any of these steps worked for you.
    Syd.

  • Epson Inkjet Tool Not Working

    During the last few weeks and after quite a few system upgrades, it would appear that the Epson Inkjet tool available in the KDE Peripherals/Printers has stopped working.
    I currently have installed KDE 3.4.0. Does this work for anybody else?

    After doing a Google seach, I think I need to say "yes" to your question. I can't seem to run "mtink" though so I am not sure what binary needs to run.

  • I am missing colors in my Adobe Pantone Plus Library that are in my physical Pantone Plus Swatch Book.

    I have the most recent Illustrator downloaded and the Pantone Plus Library however I cannot find some Pantone numbers that are in my physical Pantone Plus book. One specifically is PMS Blue 2384.
    What do I do?

    Thanks but that is not the problem. I figured it out. You have to download Pantone Color Manager Software and use the serial number from your registered Pantone Plus book to register the software. Once you do that then you can download the extra 360 colors and then export them to the Adobe programs...
    Pain in the *** but it's the only way to get the extra colors in the Pantone plus book to your adobe Pantone Plus Library.The new Library is called Pantone+ V2.
    Thank you for the response though!
    -Ant
          From: Jacob Bugge <[email protected]>
    To: Anthony R <[email protected]>
    Sent: Friday, February 27, 2015 2:34 AM
    Subject:  I am missing colors in my Adobe Pantone Plus Library that are in my physical Pantone Plus Swatch Book.
    I am missing colors in my Adobe Pantone Plus Library that are in my physical Pantone Plus Swatch Book.
    created by Jacob Bugge in Illustrator - View the full discussiona rod, You may need to download again/reinstall. For the latter,you may use the full three step way: Uninstall (ticking the box to delete the preferences), run the Cleaner Tool, and reinstall. http://www.adobe.com/support/contact/cscleanertool.html If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7235248#7235248 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7235248#7235248 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Illustrator by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • IPhone 5 Youtube videos have horrible quality even on fast wifi/LTE.

    For awhile now I have been watching videos on youtube (and pretty much any other video platform) and have been noticing that occasionally I get HORRIBLE quality. The screen gets blurry, sound quality goes way down. Even if I am connected to home wifi (I have great wifi) it still goes blurry to the point where I would rather just do on the computer. On LTE and 3G I guess it was acceptable but wifi was the kicker. My iPod Touch 4g can have better video playback than my iPhone 5. Any suggestions would be greatly appreciated. I am running on 6.0.2.

    That's probably simply due to the mobile device version of the video that you are watching just being horrible.
    As always, an example link of a video that you are talking about would help.

  • Gutenprint Driver, Epson Inkjet, XP Crazy Color Printout Problem

    Hi,
    I have problem getting the same color printout from using OSX 10.6 and XP. For both computers, i use the same printer (Epson Stylus T11), use Adobe Acrobat Pro 9 to print (with Color Profile setting as sRGB IEC61966-2.1) and the same pdf file. The PDF file was created using OSX. OSX uses gutenprint drivers 5.24 whereas XP uses the driver downloaded from Epson.
    Printout from OSX is the same as what i see on the monitor. However, the color printout using XP is different from the monitor display and the color is a lot lighter.
    I've tried changing the color management settings in Epson printing preferences in XP. Changing to ICM with No color adjustment makes the printout a lot darker. Selecting Color Controls with color mode Adobe RGB and Gamma 2.2 causes the printout to be a lot lighter. Using the default Color mode Epson VIVID and adding more cyan or magenta or yellow does not change the color printout in any way.. the printout still prints out a lot lighter.
    However if i use GIMP 2.0 in XP and import the PDF file, using the Print with Gutenprint, the printout is exactly the same as the printout from OSX.
    But this solution is not good because i have to import the PDF document page by page! (1 PDF file with 20 pages imported by GIMP will result in 20 image files! )
    SOMEONE please HELP ME!

    I'm a little confused: do you have the ICC profiles as separate files? Or are they in one special file that only your Epson driver can access?
    If you have separate files, try turning off color management in the driver and printing with the profiles out of Photoshop. If you don't have separate files, choose the paper/ink combination you use most and have a custom profile built, then use that out of Photoshop and see if it makes a difference.

Maybe you are looking for

  • Company code  is not set up for electronic tax return

    hi dear             what is the configuration of e-return salea/purchase . The system cannot execute the taxes on sales/purchases settlement within electronic communication with authorities. when i excute F.12 then message coming  Company code  is no

  • Help required on 3508 and gigabit copper Please.

    I’m running a cisco WS-C3508G-XL-EN with software 12.0(5.4)WC(1) and 4 WS-G5482 1000Base-T GBIC’s connected to and 1 Intel Pro 1000-T (Driver version 2.84.284.0) network Card and 3 3Com 3c996-T Gigabit Copper Cards (Driver Version 1.29). All the PC’s

  • HT201263 Ipod is disabled and the normal method wont work

    I started the prosess like it said on the website on how to restore it. To hold down the middle busson intill the connect to Itunes picyure came up. Then plug it in and press restore. It was downloading the updates then its stopped and said that I co

  • Printing number of copies problem

    Hello, I have a problem printing a smartform. In the printing dialog If I choose for example 3 copies, it only prints 1. No matter what I choose it always prints one copy only. I would like to print the 5 copys in the same spool order. For example If

  • Invalid Warehouse on Inventory Transfer

    Hi guys, I have a problem, I tried to us inventrory transfer to warehouse which is non "Nettable" and it gives me invalid warehouse error, Is it not possible to transfer to Non Nettable warehouse? Regards, David