Epson LX-300+II with sap

Dear gurus,
                     I had setup epson LX-300+II with sap with following parameter
                                  Device Type :EPESCP9 :EPSON ESC/ P 9PIN PRINTER
                                  host spool Access method : G:Front End Print with Control Tech
                                  Host Printer:_Default
                   there is a page format which is assign to EPSCEP9.
Print successful. but it will no print Table and box on the page...Please solve my Issue.....
Thanks in Advance,
Regards,
Snehal Patel

My guess would be that the device type definition is missing the print controls that you need.
I don't know that particular printer type but try to look into the device type-dependent print controls defined in txn. SPAD and see if it contains the controls to draw a box etc. If not, then you will probably have to copy and enhance the print control set.
Hopefully you do have the detailed manual for the printer...

Similar Messages

Does a Epson LQ 300 work with a Macintosh Se

Would a Epson LQ 300 printer work with a Macintosh Se that has system 6.0.8 and finder 6.1.8?

What printers will work with your SE?
For the SE to use a printer, it needs to have the printing software for that model of printer.
The software for all Apple printers manufactured at the time of System 6.0.8 can be found on the System 6.0.8 installer diskettes. (This includes all ImageWriters and a few LaserWriters.) In fact, this software is installed by default if you did an easy install instead of a custom install.
The printing software for most other Apple printers can be downloaded here:
[http://download.info.apple.com/AppleSupport_Area/Apple_Software_Updates/English-NorthAmerican/Macintosh/Printing>
Also look here:
[http://www.info.apple.com/support/oldersoftwarelist.html#print]
The software for non-Apple printers has to be installed with a separate installer. You can usually find this on a disk that comes with the printer.

Epson LX-300+II with

Dear Gurus,
                       I had Created printer in SAP with following parameter as per Note 153879 - EPSON printer model and SAP device types
                                 Device type :EPESCP9
                                 Access Method :G
                                 host printer :_default.
There is is page format which is assign to EPESCP9.
it print successfully. But It does not print Tables AND BOXES . Please solve my issue

What type of Dot Matrix printer is that 9PIn or LQ-55 ? Please try below device type first for 9 or 24/42 dot matrix printer
EPESCP
EPESCP2
EPESCP9
Set the print quality to 120 X 144 DPI in the printer properties.
Refer to the Note 153879 - EPSON printer model and SAP device types
Note 8928 - List of supported printers/device types - Provide appropriate driver according to your printer type and try again.
Note 153879 contains information about compatible printer models from the manufacturer EPSON.
Thanks,
Arjun
Edited by: Arjun Venkateswarlu. on Jan 31, 2012 9:31 PM

Printing Problem with EPSON LX 300+

Dear all,
I have met a problem with Epson LX 300+. After I set up printing on PLD, the result printing is bad. Font and setting are not the same as preview in SBO. How to solve this matter..? I used SBO 2005A PL 43.
Thanks for your help....
Regards,
agung
Edited by: Agung Adrianto on Aug 28, 2008 8:17 AM

Hi Agung,
Here is a way out for the issue you have submitted. I can't guarantee that this wayout work perfectly:
Question:
As we know that the dos matrix printer supports dos prompt and thus printing speed and
life of the printing head is comparatively more than what we print the same in graphical format.
So when I tried to print from SAP Bone in dot matrix printer, the printing speed is very slow and quality of printout is not good enough.
Any clarifications on this regard would prove very helpful to me.
Regards,
xxxxx
Consultant Business solutions.
Solution:
Do you use one of this printer types:
Dot Matrix, Printer, Needle Printer, Citizen ProDot 300 , Oki Microline, Epson FX880, Epson FX890 ?
Here the stepwise I have tried :
In order to print using Dot Matrix printers, follow the below
instructions:
1. Run SAP Business One.
2. Click the upper menu 'File' and select 'Page Setup'.
3. The Print Setup window opens. Under 'Paper', in the field 'Size', select 'Letter' from the drop down menu.
4. Click OK to confirm your selection.
5. On your desktop, click Start => Settings => Printers.
6. Right click on the required Dot Matrix printer and select 'Printing Preferences...'.
7. Click the 'Paper/Quality' tab page and click the 'Advanced' pushbutton.
8. Under'Paper/Output'=> 'Paper Size', click on the underlined paper size(e.g. A4) and select 'Letter' from the drop down menu.
Note that if you leave the value 'A4', each page will be spreaded over 2 pages when printing using Dot Matrix printers.
9. Under 'Graphic'=> 'Print Quality', click on the underlined value (e.g. 230X250 dots per inch) and select '120X144 dots per inch' from thedrop down menu.
Note that in case the value '120X144' is not available you should select a similar value from the list.
I did not test it yet and I am not so sure about the result but you could test it.
Rgds,

Printing Problem with Epson LX-300+ii and LX-310 in Windows Server 2012 R2 64-bit

I recently installed Windows Server 2012 R2 64-Bit.
We have Printer Epson LX-300+ii and LX-310 (dot-matrix) that we share among users. Each user access the Server using Remote Desktop. From previous experience with Windows Server 2008, I knew that these printers will be problematic, especially regarding
the Easy Print driver.
And I was right, using the Easy Print driver, I got the following result:
And so, I did manual mapping & disable the "Use Remote Desktop Easy Print printer driver first". Haha, what a surprise, I got the following result:
And so I uninstalled the printer driver, and install it again, thinking that I might chose a wrong driver, but.... same result. I know for sure that I chose the correct driver.
Next, I tried connecting the printer DIRECTLY to the server. Log-in to the Server directly,
not using Remote Desktop. And tried printing again, haha... really... what a surprise... I got the same problem here !!!
So now I know the problem is not the Easy Print driver, not mapping or registry problem either. It's the print driver. This is SUPER FRUSTRATING, I tried the same driver from the same CD in Windows 8.1 64-Bit with no problem. I tried it too in Windows 7
32-Bit with no-problem either. But somehow, this driver is problematic in Windows Server 2012 R2.
Any help? Anybody else bump into this same problem ? I'm close to giving up, been spending too much time figuring out this damn thing.
Andy

Hi Bulent Sahin,
Thank you for your reply, I tried IBM Graphics driver, but the result is equally as bad. But your answer inspire me to try different drivers. And so, the closest & best driver that I could use now is EPSON ESC/P 9pin V4 Class Driver
It's not as good as I would expect, but at least now, it's acceptable & readable. I can't believe that I'm the only one who have this problem
Thank you Mr. Sahin

Problem with character mode printing on epson lx-300

Greetings
I developed a character mode report and is printing fine on the printer lx-300 when I use Reports 6i (Client/Server)
We migrated all the platform to OAS 10G Release2 bu the same report has the following behaviour:
1. The left margin is shift to lthe right about 2 inches.
2. Is printing shrinked and the characters doesn't see well.
The report is a character mode report of (132 columns, 66 lines).
I set the default prt to:
printer "dflt"
height 66
width 132
after page control(L)
return ""
linefeed control(J)
The run parameters are mode=character and desformat=dlft.prt
Anybody has experience using character mode reports on 10g on matrix printers like epson lx-300?
Thanks!

Hi Agung,
Here is a way out for the issue you have submitted. I can't guarantee that this wayout work perfectly:
Question:
As we know that the dos matrix printer supports dos prompt and thus printing speed and
life of the printing head is comparatively more than what we print the same in graphical format.
So when I tried to print from SAP Bone in dot matrix printer, the printing speed is very slow and quality of printout is not good enough.
Any clarifications on this regard would prove very helpful to me.
Regards,
xxxxx
Consultant Business solutions.
Solution:
Do you use one of this printer types:
Dot Matrix, Printer, Needle Printer, Citizen ProDot 300 , Oki Microline, Epson FX880, Epson FX890 ?
Here the stepwise I have tried :
In order to print using Dot Matrix printers, follow the below
instructions:
1. Run SAP Business One.
2. Click the upper menu 'File' and select 'Page Setup'.
3. The Print Setup window opens. Under 'Paper', in the field 'Size', select 'Letter' from the drop down menu.
4. Click OK to confirm your selection.
5. On your desktop, click Start => Settings => Printers.
6. Right click on the required Dot Matrix printer and select 'Printing Preferences...'.
7. Click the 'Paper/Quality' tab page and click the 'Advanced' pushbutton.
8. Under'Paper/Output'=> 'Paper Size', click on the underlined paper size(e.g. A4) and select 'Letter' from the drop down menu.
Note that if you leave the value 'A4', each page will be spreaded over 2 pages when printing using Dot Matrix printers.
9. Under 'Graphic'=> 'Print Quality', click on the underlined value (e.g. 230X250 dots per inch) and select '120X144 dots per inch' from thedrop down menu.
Note that in case the value '120X144' is not available you should select a similar value from the list.
I did not test it yet and I am not so sure about the result but you could test it.
Rgds,

EPSON LX-300+II printer

Hi,
We are implementing ECC6.0 and now we are doing printer configuration. We have EPSON LX-300+II dot matrix printer. And we have created a output device ZLP01 but we haven't found this printer in the device type list. So we have choosen nearest printer KPKS: EPSON Dot-Matrix KS, device class standard printer, Host spool access Method G:Front End Printing with Control Tech., Host Printer _DEFAULT.
But it is printing some junk numbers like f460y2X0y2X0y2X0y2X0y2X0y
So, please help me to configure my printer.
Regards,
Nilesh

Hi Nilesh,
This is SAP Business One forum.
Close this thread and re-post your question to a correct forum
Regards,
Bala

Printing Cheque using EPSON LX-300

Hi Everyone,
Could you please help me with this issue?!
I had implemented the Cheque process but when I am using EPSON LX-300 printer an error occurs. Some numbers and letters are showing up on the begining of the line. I think that this is because of printer configuration.
On the Spool transaction the cheque is nice.
Do you know how I can solve that?
Thanks
Daniel Dorta

hi
set the margin either in the Print out or in the printer configuration.

Epson LX-300, Epson FX-890 printers in Windows Server 2008 x 64 and Windows 7 (x32 and x64)

I have the following problema working with RDP connections to Windows 2008 Server (x64) SP2 and Windows 7 Professional (x32 & x64).
I have setup correctly an Epson LX-300, LX-300+, LX-300+II and FX-890 printers in separate computers in Windows 7 (all working under Windows 7 Professional x64 and x32) and they work correctly.
I need to RDP to a Windows 2008 Server SP 2(x64) and once I log in, the Server Operating System recognizes my printer with no problem at all (Redirected Printer), but when I print, the characters and not understandable, since the printed information is blurry.
When I do excatly the same procedure but with a Client with Windows XP installed the printed information is totally clear, so we can determine at least that the printers are working fine.
I understand this should be a driver issue, but i simply can't make it work correctly.
Can anybody help.

Hi,
Since the printer can print the test page, there is no need to collect the Event log. I notice there is no specify driver for Windows 7 and Windows Server 2008. It seems the default Easy Printer driver doesn’t work properly for these printers.
I suggest you install the Windows Vista driver version on the Server for testing.
LX-300 Impact Printer
LX-300+ Impact Printer
LX-300+ II Impact Printer
If the issue persists, let’s disable Easy Printer for a test.
Computer Configuration\Administrative Templates\Windows Components\Terminal Services\Terminal Server\Printer Redirection ->
Disabled
Also test the following KB.
http://support.microsoft.com/kb/959442/en-us
Niki Han
TechNet Community Support

How to make barcode interface with SAP B1

Hi all,
I need an interface code to make an interface between barcode printer with SAP B1. i got a scenario from the barcode people. that they are using EPL coding only for Barcode printer print, there they need to run this EPL code in Dos mode, for that .bat file is needed. hope you might got some idea that how a barcode printer is working. now how to make an interface of SAP B1 with Barcode printer.
how to generate a code which will put the bar code and price with the AP invoice of the item in EPL code which is in a text format. so that by .bat format txt file should be run in dos mode.
if you have any other process to run the EPL code, kindly send me the details as soon as possible....its very urgent.
regards
sandip

Sandip,
I think what you may be more concerned about, rather than the printer "language" (ZPL, EPL, etc...) is the symbology that you require for barcodes. Like 3of9, code 128, etc.
The standard B1 PLD will input a barcode image for whatever field you specify, but only in a couple of symbologies. The Advanced Layout Designer apparently supports a lot more. I have read that it may be requested from you partner, or if on 2007, it is part of the standard install.
B1 should pass the bar code to the printer, where the printer's language will decode and print it out. Bypass the .bat file, bypass DOS, let B1 do it.
Is your Epson printer supported under Windows?

Gain a competitive edge with SAP HANA certification

Please see the following blog:
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/27492
Regards,
Marc
SAP Customer Solution Adoption (CSA)
Edited by: Marc Bernard on Nov 29, 2011 11:59 AM

Hey Vitaly,
1) It's a private training course provided with SAP HANA access. Also, the trainer is supposedly the first person to be certified in HANA in Southeast Asia (he currently works in Singapore). The link is below:
http://www.eknazar.com/houston/ekClassifieds/product_desc.php?id=422617&al=1
I don't think they are affiliated with SAP, but I should ask. The reason I preferred this training is it was 5 day training with 1 month access to SAP HANA, and little cheaper cost. The training SAP provided was only 2 day class - felt it would be too overwhelming (and I don't think they give HANA access besides maybe 2 days)
2) Money is gone? So $1,300 down the drain if you fail? Jeez. Is there a way to just pay for taking the test rather than paying for the training also?

De-link PPM Item with SAP Project

Hello,
Can somebdoy throw a light on what to do in case I want to de-link a PPM-item with SAP project.This situation may rise if I want to change the project actuals going to bucket A to bucket B.As I can not change the relationship of an item with the bucket, I am looking for alternate solution where I can de-link SAP Project with SAP PPM item.
thank you!
Regards,
Mahendra

Hi Mahendra
If you are meaning to de-link a PS Project from a PPM Item, you can from the Item navigate to the 'Relationships' tab and then on the 'object links'sub-tab select and delete the assignment:
You can also remove a cProject relationship by clicking the 'Related Objects' sub-tab
Your comment that you cannot move an Item to a new Bucket - is this because your business process does not allow you to do so? Because this is definitely possible in the system.
Let me know if you have any further questions as I am not sure I have addressed your question
Regards
C

Log on to Infoview with SAP authentication

Hi Gurus ,
Please can some one provide me documentation , to configure , Infoview with SAP authentication .
I have R/3 system where i have a datasource and then one Remote cube in BW . On the cube developed a BEx Query . I want to log into Infoview using SAP authentication .Now, i am able to login into Infoview using Enterprise as authentication .
Thanks ,
Madhu .

Hi Madhu,
You can go to help SAP and download the BusinessObjects SAP Kit manual, here is the link for SAP BusinessObjects products. [http://help.sap.com/content/bobj/bobj/index.htm]
Link for BusinessObjects XI Integration for SAP Installation Guide (XI3.1SP2) [https://websmp105.sap-ag.de/~sapidb/011000358700000843912009E/xi31_sp2_bip_sap_install.pdf]
Link for BusinessObjects XI Integration for SAP User's Guide (XI3.1SP2) [http://help.sap.com/businessobject/product_guides/boexir31SP2/en/xi31_sp2_bip_sap_user_en.pdf]
I hope this help you.
Best regards,
Fede

Issue with SAP Single Sign-On and Scheduling Reports

Hello --
We are on XI 3.1 with SAP BW and SSO. Some users are getting failures with this error message when they schedule a report to run:
"A database error occured. The database error text is: Unable to connect to SAP BW server System received an expired SSO ticket. (WIS 10901)."
It SEEMS as though the users are fine if they schedule the report to run immediately and have it run every hour (or less) after that. If they schedule it to run several hours from the time they are in the system, however, it looks like they begin getting failures around 8 hours after they were in the system. This would make sense from looking at the "InfoView and Central Management Console Session Management" document (https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/405547f9-b840-2b10-44b5-8e17ff9e48a9&overridelayout=true) since a logon token expires after 8 hours, but since it is a scheduled report, and the user is not logged in through a browser, how is a token being passed? Is it captured and included when the report is scheduled? Would disabling logon tokens fix this issue? How is authentication handled here if they are disabled?
Thanks for any info
Casey

Hi Gurus
I am facing the exact same error.
However, we are not trying to schedule the WEBI report.
The user gets this error even when he is running on demand from the portal.
Here are the various steps tha twe have tried and still it doesnt work:
1) Refreshed and created new Universe connection
2) Bounced BOE server
3) Synced up the SSO timeout ticket to 8 hrs on all systems including BOE
4) Changed browsers
5) Removed cache, cookies etc
Please help.

SSO with SAP logon tickets to non-SAP web app

I am trying to implement SSO to an oracle portal based web application using SAP logon tickets, but can't seem to find a way for it to work. I thought maybe it would be a web server filter, but am unsure if this would work for oracle portal. Anyone tried similar?
Cindy

Hi Cindy,
If it is EP6 SP2 probably you can checkout the following document.
http://service.sap.com/ep60
Go to Documentation Help>How-To-Guides>Current How To Guides section.
checkout the following how to guide.
Perform Cross Domain SSO with SAP Logon tickets zip file.
If you want the zip file please send an e-mail to
[email protected]
Regards
-Venkat Malempati

Epson LX-300+II with sap

Similar Messages

Maybe you are looking for