Epson NX420 - Settings Help

Hey all,
So i set up my Epson NX420 AiO printer a couple days ago, and i would like to change the order in which the papers print. So, i know i go to print and select the drop down menu and choose "paper handling" and then change print order to "reverse".
but... do i have to do that every time i print? or is there a way to change that do a default setting so that i dont have to go through that everytime?
lazyness is a virtue, i know... but it gets annoying having to do that every time. thanks for your help in advance!
~BK

Hello. My name is Syd and I work for Epson America, Inc.
Unfortunately there is no way to default to a specific driver setting, however, you can create and save a Preset with the changes that you want. Use this Preset when you setup for printing.
Hope this helps,
Syd

Similar Messages

  • Setting up Epson NX420 Printer to Macbook Pro

    How do I set up my Epson NX420 to my macbook pro wirelessly? I've installed the Epson software but my printer will not show up in my available printer list and I've tried everything.

    lutherkate wrote:
    Thanks for helping me out.  I'm not seeing Image Capture in my applications folder.
    Image Capture has been part OS X for years. You sure that you looking in the correct place...? Look in the main Applications Folder and not the applications folder in your Home Folder.
    Additionally:
    To correctlly set up a printer in Mavericks, see > OS X Mavericks: Set up a printer
    For the Epson NX420 ICA Scanner Driver, go to > Epson Support and follow those instructions.

  • Using Image Capture with Epson NX420 in 10.5.8

    I have not gotten around to updating my computer to Snow Leopard. My computer usually have two users with fast user switch. Usually the other user tend to have Photoshop open, so I can't use Photoshop(stupid licensing issue even though it is on th SAME computer!) in my account when I need to scan something. So I use Image Capture. I just bought new printer, Epson NX420 using Wifi.
    I can't seem to get Image Capture to use the scanner wirelessly unless I use Epson's own Scan softare. I am pretty partial to the Image Capture cuz it's alot faster.
    Anyway, my point is is there a way that I can get Image Capture to work with the NX420 on 10.5.8 without spending more money?

    I was having this same problem, too. My MacBook Pro w/ Lion could no longer communicate with my Epson Stylus NX420, which seemed to happen randomly as the printer was working fine before.
    I finally searched for the solution and found it! After downloading and installing the latest drivers on my Mac, it is now able to communicate with the printer and prints just fine.
    Hope this helps.

  • Epson Printer Settings

    I am hoping someone can help with a problem I am having changing the Epson printer settings in PSE 10.  I am using ColorLife paper with my Epson Stylus Photo R280 printer.  Since the printer driver does not support ColorLife paper, I need to adjust the printer driver to "Ultra Premium Photo Paper Glossy", Best Photo, and color management (i.e., set Color Controls for Magenta to -12, and Cyan/Yellow to -7).  However, every time I make that adjustment and close out of the printer settings in PSE 10 and then go back in, the Color Controls are set to ICM, with the box for "Off (No Color Adjustment)" checked.
    I've tried making the changes in the printer driver outside of PSE 10 as well as under the advanced settings in PSE 10.  I also reinstalled the most up-to-date printer driver and the settings still will not take.  Without the ability to change the color controls, the output on ColorLife paper has a greenish tone and the density of some of the dark contrast is way off.
    I'm pretty sure the problem is with PSE 10 as I have not had this issue with any other software using the Epson printer driver.  Any ideas on what I can try would be greatly appreciated.

    Have you specified to let the printer manage colours?
    Also see that warning message about enabling colour management in the printer preferences dialog.
    If those are the settings you've tried and they don't "stick", try re-setting your PSE Preferences by holding down the Ctrl+Alt+Shift keys while launching the Editor and saying "Yes" to deleting the preferences.
    Ken

  • My ipod screen wont slide to unlock and i have just reset it to factory settings, help!

    my ipod screen wont slide to unlock and i have just reset it to factory settings, help!

    Seems like a hardware problem.  An appointment at the Genius Bar of an Apple store is in order.

  • I phone 5c settings help.

    help!i phone 5c settings help.  upon opening phone shows enlarged keypad for my pass code, but is difficult to type on. how to get my numbers and home screen back to normal.

    On the Home screen, double-tap with three fingers to exit zoom.
    Then, after you have entered your Passcode...
    go to Settings > General > Accessibility and make sure Zoom is turned Off.
    More Info here  >  http://support.apple.com/kb/ts3129

  • Your call cannot be connected pls. check your phone settings help plsss

    your call cannot be connected pls. check your phone settings help plsss

    mhayo wrote:
    your call cannot be connected pls. check your phone settings help plsss
    Check the Telephone Number you are calling...
    Contact your Carrier.
    Also...
    Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • When trying to connect to epson nx420 printer it disappears from the list of printers..

    how do i select my epson nx420 printer when it automatically disappears when i try to click it?

    Are you using IPP or LPD? IPP usually gives better results, if activated at the printer. As for automatic driver selection, it normally doesn't work thru TCP/IP, only thru AppleTalk. So you have to scroll down and look for the specific model. If not there, make sure you don't have a "Lexmark Printer Drivers Update" pending to install on System Update. Or visit the Lexmark.com site and download the drivers file to install.

  • How to stop Epson NX420 from broadcasting to Bonjour?

    Epson NX420 is wireless and on my network, but the problem is with Bonjour every computer on my network can "see" the printer and print to it. I would prefer if only the computers I set up with the software could see and print to the printer.
    I don't want company coming over with their laptops, and being able to use my printer.
    Any way to tell the printer to stop broadcasting itself to Bonjour?

    The ability to connect to the printer via wireless usually requires the user connecting to the wireless access point. Printers usually don't provide the means for a computer to connect directly to it. The printer connects to the wireless access point (ie wireless router) and the computers also need to connect to this wireless access point.
    So if you don't want people using your printer then don't permit them to connect to your wireless network. But if they are allowed to be on this wireless network and you just don't want them to see the printer then this is going to depend on the capabilities of the network menus in the Epson.
    Looking at how cheap the device is I would be surprised if there was the means to disable Bonjour but check the network menus or the manuals for the option just in case.
    If there is no means to disable Bonjour then there may be an address filtering option, whereby you can enter the address of computer that are only permitted to print to the device. Again, I would not expect such a cheap device to have these capabilities but check the network section of the manuals in case there is something like this.

  • HT4505 I have 4 accounts on my Mac Pro running Mavericks.  From one account I can scan with my Epson NX420, but the other three accounts do not see the scanner.  Can print from all accounts.

    Sorry, I was not given the option of posting to a Maverics community.  I have 4 accounts on my Mac Pro running Mavericks.  From one account I can scan with my Epson NX420, but the other three accounts do not see the scanner.  Can print from all accounts.

    Hi there Ira Fletcher,
    I would recommend taking a look at the troubleshooting steps found in the article below. Note: While the article was written for printer issues, many of the same troubleshooting steps apply to scanners as well.
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    -Griff W.

  • Lost Epson print settings in CS5. Help

    When I initiate a print in CS4, I get the Epson options to choose paper settings, etc. In CS5, the file just starts to print. When I click on the button that says Print Settings, nothing happens. I have both CS4 and CS5 still on my computer so I am working in 5 and then printing in 4. Surely there is a fix for this???? Thanks!

    In CS5, the "Print Settings" button has replaced "Page Setup". Click on it before clicking print. If you don't, it'll use the previously used settings.
    If "nothing happens" when clicking the "Print Settings" button, try switching printers or try switching from "Photoshop Manages Colors" to "Printer Manages Colors" (or vice-versa). If all else fails, relaunch Photoshop while holding the command, control, shift and option keys (one of them may not be needed, but I can never remember which, so I just mash them all) to delete the application preferences.

  • Epson NX420 wireless printing not working

    After upgrading to Yosemite, I noticed the printing capability on my NX420 was gone. I get communication errors and a prompt to download software; but after downing, a notice for error downloading. No updates show up via App store.
    I have downloaded the software via Epson and installed; but it still doesn't work. My son's i5 iMac running Yosemite is printing fine wirelessly.

    Hi @AllysonR , and welcome to the HP Forums!
    I see you're experiencing connectivity issues.  I would like to help!
    I'd recommend performing a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I'd then suggest following this document:
    Wireless printing center Troubleshooting Issues
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Trouble Printing from Pages v5.5.3 to Epson NX420

    I use OS X Yosemite 10.10.3 on an iMac, 2.8 GHz Intel Corei5, 4GB 1333 MHz DDR3 with 932.44 GB free storage.
    I downloaded Pages v5.5.3 and ever since I downloaded this as well as the previous version of Pages I cannot print a document.  All printing procedures appear to be fine but when the paper is ejected from the printer there is no ink on the page.  When using the previous version, I developed a workaround by copying the contents of the file, pasting them into another new file, renaming and was able to print successfully.  Now the same problem has reappeared with this latest Pages version except my workaround solution doesn't work.
    My printer is an Epson Stylus NX420. I have
    ensured I have adequate ink levels
    determined that the cartridges are correctly inserted and seated
    deleted and added the printer
    reset the printer
    determined the latest driver is installed
    submitted this issue to their Support Staff to find out if the printer may be the problem
    I am able to print files from other apps such as Numbers.
    Has anyone else experienced this issue?  Is there a setting in the latest version of Pages that I need to correct?
    I have tried researching this on the internet but have found no information regarding bugs with this version of Pages.
    Thank you for your help.
    Tanya

    I am surprised that you have found no references to bugs in Pages 5.5.3.
    Pages 5 has broken nearly every printer driver with every release.
    We always recommend that you seek the latest Printer Driver from your Printer manufacturer and try again.
    Do you have Pages '09 to test?
    Peter

  • How do i get sound from macbook internal speakers? need sound settings help

    hi,
    i have installed service pack 3 on bootcamp on new macbook.
    i cant get any sound with all my audio applications, even windows media player. i can see the levels and audio files playing within the software (soundforge, wavelab, cubase etc) but cant get any sound to come out the macbook internal speakers........
    ive tried all the available audio driver settings from within the apps.
    ive checked the sound controls menu from my system tray...all the volume faders are full, unmuted.
    theres a realteck or something like that, control panel......i think realtek is the internal sound funtion of my windows xp......
    anyone help?
    (ive updated bootamp to 2.1 with software updater..... ive intalled the bootcamp drivers from my leopard install dvd....)
    shall i put the leopard dvd in again? in case the bootcamp drivers never got installed????
    i just used the first leopard dvd.........should we also use the 2nd leopard dvd????? bootcamp manual just says put leopard dvd in and install bootcamp drivers.........but it dont say which leopard dvd.........
    cheers
    i understand latency is gonna be an issue with internal sound drivers.....any one recommend third party sound drivers for use with internal macbook?
    (for proper work im gonna use a proper external soundcard with ASIO drivers, but i wanna get half decent sound and latency from macbook internally for when i wanna use JUST the laptop, with no units connected)

    dude..... i cant answer that.....cause i dont know....... im pretty sure i didnt do anything.....sound just started working..........
    ive done so much over the past few weeks.....its all a blur......
    seem to recall changing windows sound settings to NO SOUND to get those irritating beeps to go away..... thats all i can remember......
    anyway its working.....mac internal sound is working.....and also i have found a gooooood driver to use.....to lower latency...... its called asio4all...... its the best driver i have used in cubase on bootcamp...... goooooood latency figs...sounds nice too.......
    guess what? ive also had my first crash since i bought the mac......on windows xp////sdffdjojfnds
    ararrrrrrrrrrrghhhhhhhhhhhhhhhh

  • Final Cut Exporting to DVD Settings Help!

    Hello, all. Hopefully someone can help me with this problem that I have been struggling with for weeks.
    I shot a video project in standard definition on a Sony VX2000, then edited it in Final Cut Express. I am now wondering what the best export settings would be in order to put it onto a DVD, and maintain the quality at 100 percent. I've tried exporting it in several different ways, but no matter what I do, the quality is never as good as it was shot.
    So, what should the export settings be from Final Cut? And do you think I need to use a different software to maintain perfect quality on a DVD?
    Thanks so much

    You need to ask this question on the FCE forum
    Final Cut Express HD

Maybe you are looking for