Epson NX420 wireless printing not working

After upgrading to Yosemite, I noticed the printing capability on my NX420 was gone. I get communication errors and a prompt to download software; but after downing, a notice for error downloading. No updates show up via App store.
I have downloaded the software via Epson and installed; but it still doesn't work. My son's i5 iMac running Yosemite is printing fine wirelessly.

Hi @AllysonR , and welcome to the HP Forums!
I see you're experiencing connectivity issues. I would like to help!
I'd recommend performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I'd then suggest following this document:
Wireless printing center Troubleshooting Issues
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

Wireless printer not working after 10.5 upgrade

My Canon All-in one MP600 was working fine using 10.4.11 and Airport Extreme Base Station. I upgraded to 10.5.4 and now the printer does not work. I checked the Airport utility and the printer shows under printer. The printer works fine on my wife's MacBook. The old printer setup utility app is not present on 10.5. Am I missing something? I followed the instructions to install the wireless printer but it still does not work. It works fine when I use the USB cable directly to my powerbook G4.

Found problem. Removed printer from Sys Prefs -> Printers and Fax and re-installed it. Works now.

Apple airport express wireless printing not working on Windows

I have installed the Airport Utility v 5.5.3 and Bonjour Printer Wizard on my Windows XP (SP3) machine. I have successfully set up the router, but am unable to print wirelessly. In the utility, I see my printer and have selected the checkbox Share printers over WAN. I have the driver printers installed on a Windows laptop, but am unsuccessful printing from the laptop.
I read somewhere that I need to set the Internet > Connection Sharing to Off (Bridge Mode). I did that and then got the following error and then can't connect to the internet via the router at all:
An error occurred while trying to access the Apple wireless device. Make sure your network connection is valid and try again. Error -6753.
I have tried setting up Bridge Mode several times and ensured my virus protection and firewall were disabled, but always the same results, so I reset my router and am back to using the Internet > Connection Sharing option of Share a public IP address.
The whole reason I bought this router is because it is supposed to be easy for wireless printing, but this has been far from easy to set up. So frustrating. Any suggestions?

Thank you for your quick response. Yes, I have Bonjour Print Services installed. I thought I had to select Share printers over WAN for some reason. Just now I deselected this setting, updated the utility and wireless printing still does not work .

HP 6980 wireless printing not working

I cannot get my printer to go wireless. I have tried all the advice I have seen so far but teh wireless does not seem to connect.
I have tried the SES but the wireless light continues flashing and then turns off.
I have gone into the printer through its IP address and it does not come up with the router in the list.
I have manually entered all the details in the advanced tab, but when I unplug the ethernet cable the report page says
wireless status disabled (even though the blue light is on)
I can only think that the wireless facility is broken or am I missing something.
I am working from windows 7 and the driverers are installed and working normally when connected by ethernet cable.

Does anybody have an idea where to start looking at least? Where could be the problem?

Scanner and Wireless Printing Not Working

Most of the features in my new printer are not functioning probley. The scanner does not work at all. Whether I'm using th wireless network or the printer is connected with UBS. Wireless printing is not working too. I don't know what to do. I tried to contact the customer support, but in order to do that, I had to provide the serial number. I put the number, but it said that they're unable to identify the serial number. Listed below all the information pf my frustrating printer.
My compurt is MacBook Air. OSX 10.7.5
Model: Deskjet 3050A J611
Serial No.: {Removed for privacy}
FPU No.: CR23164001

Hi Alsahafi,
I mention they were unable to verify the serial, was this a new in box printer?
Also, make sure you've installed the full feature driver for your OS X version, you can find this download here.
Don't forget to mark a post as solved if it fixed your issue

Wireless printing not working properly on HP officejet 4500

Hi,
I have recently bought the OfficeJet 4500 wireless printer.
Now I have a problem when printing a document from wireless connection. When I send a document to be printed from wireless network, it does not transfer completely, and the document can’t be printed completely. This accurse when sending small files (128 KB) and a bit larger (1,14 MB) files.
When printing the same document when connected to the printer with the usb cable, the document will print correctly.
I have followed the steps of wizard for wireless set up, and when I printed the confirmation page, all was set correctly.
The router I’m using is a Linksys WRT45GL. The IPs are set by dhcp and I don’t have a MAC filter active.
Can you help me with my problem?

Does anybody have an idea where to start looking at least? Where could be the problem?

HP Photosmart Premium C309g-m Wireless Printing Not Working

I have a HP Photosmart Premium C309g-m running as a network printer that is not working on my Windows 8.1 laptop. I have tried uninstalling and reinstalling the all-in-one software, which did not help (and the solution center software had issues, but a test page did successfully print), nor did the HP troubleshooting software.
Whenever I click print nothing seems to happen, I see no document in the spooler. I have also tried selecting the 'printer properties' only to have a pop up say the driver is not installed.
I need help!!!!

Hi ZacharyW, and thanks for getting back to me!
I know you have uninstalled in the past, but I would like to take a bit of a different approach:
First, you'll want to uninstall the current software:
Uninstalling the Printer Software
Then, put your printer into clean boot mode:
How to perform a clean boot in Windows
Once the computer is in clean boot mode, reinstall the software via the HP Printer Install Wizard for Windows.
Good luck and please keep me posted!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

C7289 All in one- wireless printing not working

It looks like all connected for wireless printing, however, nohing will print! Please help

Print a Wireless Network Test from the front of the printer (Setup > Network area). Does the printer have a valid IP address (not 0.0.0.0 or 169.254.x.x)?
Tell me about your network - router brand/model, encryption type (WEP, WPA, etc) and ISP type (DSL, Cable, etc).
What operating system?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

MFP 177 wireless printing not work on win8.1

Hi,
Just bought a HP color Laserjet MFP177 4 in one printer. After installation (and many attempts) i am failng to print from my PC. However it did print the test page at the time of installation and scanning function is working fine.
Please help

Hi @Razeen ,
I see that you are not able to print over the wireless network, but you can scan. I can help you with this.
Temporarily turn off any Firewalls to make sure they aren't interfering.
I have provided a document to try and resolve this issue. Also download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it.
'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
Disregard the title.
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
Please provide in detail the results if you are still having issues.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Deskjet 6988, wireless printing not working. Network light blinking.

Deskjet 6988 will only print when connected via USB, used to work wirelessly.....now network light on printer blinks. Please assist.

Get the latest software for your printer from the "Support & Drivers" link at the top of this page, run it and choose Network or Wireless installation when it asks.
What operating system are you using?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working'

error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working' My broadband is BT Infinity with a very strong signal throughout the house and my operating system is Windows XP. My printer will not connect wirelessly to my network, what can I do with respect to the error message 'Wireless Radio not Working'

Hello @GeoffH777 ,
Perfect! You are very welcome, I am very happy to hear the reset helped!
If you have a quick moment, please scroll back to my last message here and click the "Accepted Solution" button, so others can find our thread if they happen to run into the same issue.
Greatly appreciated, have a wonderful day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printer not working following iPad uodate

Printer not working following iPad upgrade

Hi,
Is the printer not mechanically working or are you having a problem with printing wirelessly from your device? Was the upgrade to the ipad software or did you get a new ipad?
Try restarting your apple device - It's a simple fix that sometimes helps re-establish the connection to the printer.
Other things to check would be that there have been no recent changes to the wifi password.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

HP 5524 Wireless does not work after firmware upgrade

HI,
I have just purchased an HP5524. After initial problems setting up the WPA key from the printer screen, I connected via USB, found the printer and swapped to wireless successfuly. I then installed the printer software on all my computers at home successfully over wireless.
The printer then needed a firmware upgrade to support eprint (?), which is successfully connected, downloaded the fireware, installed and went through the boot cycles successfully.
However, ever since wireless will not work. Before I return it to the retailer as "not fit for purpose" I thought I would ask the forum. The diagnostics downloaded a tool, which I went through, but this did not offer solutions that I had not already tried.
Thank you

Hi,
Thank you for posting you query,
In order to resolve the issue, please make sure the printer is placed closer to the router and uninstall the printer drivers already installed and then start the instalaltion and seelct teh connection type as wireless network. Then select use USB to configure wireless and when prompted conenct the USB cable and then select the network and enter the encryption key follow the onscreen instructions.
If the issue still persisits, please open the browser and in the address bar enter the IP address of the router and click on GO. This will take you to the router configuration page. On the router page, please click on Wireless Setup and please make sure SSID Broadcast is enabeld and the Wireless Mode is set to Mixed or 802.11 B/G/N and the Wireless Channel is set to 11 and click on Apply. Then try to connect the printer to the network by using the CD.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Keyboard wireless key not working after upgrading to windows 8.1

Hello,
I am having hp pavilion dv6-6165tx notebook, where keyboard having a wireless button that turns ON and OFF all wireless devices, After upgrading to windows 8.1, HP Connection Manager is not getting installed, as well as Key is not working, key color turns red and white but no action is performed.
Kindly suggest me some solution.
Note: HP Doesn't provide drivers for windows 8/8.1 ONLY WINDOWS 7 for hp pavilion dv6-6165tx.
Thanks.

Hi @Jayesh_Bhadja ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6165tx Notebook and the Wireless keyboard not working correctly. Here is a link to troubleshoot the keyboard.
The HP Connection Manager is something that is for Windows 7 not Windows 8.1. I would uninstall this from your Notebook. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It has a troubleshooting tool in this.
Make sure all your updates have been completed. I would try restarting my Notebook a few times.
If that does not help I would uninstall the keyboard from the Device manager.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP Laserjet 1320 attention light on, printer not working.

I checked for paper jam, reseated printer cartridge, removed and reinserted printer and line cord plugs. Turned printer on and off. Attention light remains on and printer not working.

Hi Robert8695,
Let's manage one issue at a time. Regarding the error "unable to establish a two-way connection with the device", check out the link below for troubleshooting you can do to resolve it:
http://goo.gl/u3Snr
Let me know what happens and if the other problems persist as well.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Epson NX420 wireless printing not working

Similar Messages

Maybe you are looking for