Epson Printer Driver/Apple Update Conflict?

The Apple Epson Driver 2.15 update (Snow Leopard) was in conflict with the installed Epson  Printer Driver on Epson WF-2530 causing a permanent printing failure. Epson reported that "their staff was working with Apple  Staff" to eliminate the conflict. Epson Technicians warned not to install 2.15 or I would lose printing capability again. Recently an Apple Epson Driver download was announced (2.15.1 @30.9 MB). Does that eliminate the problem? Should it be downloaded?

If I were in your position I would not rush to download the new update. Presumably it was intended to address the conflict, but if you restored your printer to operating condition and it is now working acceptably, I'd be inclined to let others be the guinea pigs.
Determining the reason for the update will be difficult or impossible. Apple generally provides a brief, though not necessarily complete, list of problems OS X updates are intended to address, but such information is not generally provided for printer driver updates: http://support.apple.com/kb/DL1398
You might try an Epson user support site.

Similar Messages

  • Epson rx680 will not print after apple update print driver

    I have an Epson RX680 which worked perfectly until I allowed the latest apple update to be installed with newest epson printer driver. It now will not print but comes back with a rasce blah blah error. Tried restoring to the previous software but to no avail.

    https://discussions.apple.com/thread/5233149

  • Problem with Latest Epson Printer Driver Update

    I installed the Epson printer driver update that came out today, but it made absolutely no difference. My Epson printer is still using a the same old Epson driver plus Gutenprint. There is no other option. I don't get it. What's the point of installing the update if the printer is still stuck with Gutenprint? My printer (Epson Stylus Photo R340) is supported according to Apple's list.

    alansky1 wrote:
    Thanks for that tip, John. I found the "Epson SP R340 series" driver by searching for it as you suggested.
    Happy to help Alan.
    HOWEVER, I cannot print with this driver. I get the following error message when I try to print:
    Error: Library/Printers/EPSON/InketPrinter2/Filter/rastertoescpll.app/Contents/MacOS/r astertoescpll failed
    This seems common with the Epson drivers, there are several posts here with that problem. Some users have had success deleting the printer from Print & Fax Prefs and adding it again using the Epson (non-Gutenprint) driver. Others have had to delete the <hard drive>/Library/Printers/EPSON and /Library/Caches/Epson folders, re-download the update, then re-add the printer.
    I would try the first one first since it's the easiest and you already have the update installed. If that doesn't work, the second should.
    Hope this helps.

  • Epson Perfection 2400 Scanner issue with Epson Print Driver 2.4.1 Update

    After the Epson Print Driver 2.4.1 update, my scanner quit working with Image
    Capture, which hangs during the overview scan. The scanner makes a pass over
    the document, but Image Capture just sits for a while saying "Overview Scan..."
    and then fails with a generic error message.
    I tried the suggestion in [11993273|http://discussions.apple.com/thread.jspa?messageID=11993273&#11993273 ], but that did not work for me.
    Any other ideas?

    Thank's for the suggestion, but no help.
    It is not straight-forward to uninstall the driver because Apple installer
    does not offer an uninstall option. I resorted to
    sudo find /Library -iname "epson" -print -exec mv {} ~/Desktop/epson \;
    in the terminal. Reboot. Ran EPSONPrinterDrivers.pkg. Ran Disk Utility's
    Repair Permissions. Reboot. Added scanner back in the System Preferences.
    Opened Image Capture, the overview scan started and a few minutes later
    *Scanner reported and error*
    An error occured during scanning.

  • Epson Printer Driver Update 2.18 and Stylus Photo 1400

    My Mac Mini was unable to communicate with my Epson Stylus Photo 1400 printer, after installing the recent Epson Printer Driver Update 2.18. I am running Mac OS 10.7.5. Reinstalling the original driver from the Epson CD got me back on track, but, a test print from the installer did not work without additional software from Apple's servers. Avoid Update 2.18, if you are using similar equipment.

    Since updating to EPSON Printer Software Update 2.18, I have not been able to print to my EPSON Stylus DX6000 (under OS X 10.6.8 Snow Leopard).  The printer dialog box says
    Error:/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpll.app/Contents/ MacOs/rastertoescpll failed
    Using Time Machine, I restored rastertoescpll.app from a time before I upgraded to the 2.18 drivers, but that didn't work.  I then restored the entire EPSON folder from
    /Library/Printers/
    from a time before I upgraded to the 2.18 drivers, and that still didn't work. 
    I was not able to find the Update 2.17 on the Apple site, but I was able to find it on the www.techspot.com site. 
    I downloaded EPSON Printer Software Update 2.17 from
    http://www.techspot.com/drivers/driver/file/information/16158/
    This downloaded EPSONPrinterDrivers2.17.dmg
    I dragged the EPSON folder to the Trash, and emptied the Trash.  I then ran the installer for the 2.17 drivers.  After switching the printer off and on again, I was finally able to print.

  • 10.7.5, MacBook Pro Why can't I update many things including my Epson printer driver?

    10.7.5, MacBook Pro Why can't I update many things including my Epson printer driver?

    Not sure. I'd have to be sitting in front of it to tell what is really going on. Do you have a valid internet connection?
    Make a note of the updates then go to the Apple Download website and download one or two of them and then try to install them.
    You have to do a search for them.
    http://support.apple.com/downloads/

  • Epson print driver update

    Running S L.
    When installing accidentally updated Epson print drivers.
    Does anyone know of how to remove this update - as now use Canon printer.

    For some reason the +Epson Printer Driver Update+ and +HP Printer Driver Update+ seem to be 'sticky' in the Software Update list under Snow Leopard. They often remain in the list even after you install them.
    When you run Software Update, just uncheck them so you don't re-install them.
    And BTW, turn off automatic software updates. Do them manually & selectively.

  • Printing problems after installing the Epson Printer Driver 2.16

    Has anyone experienced any problems after installing the Epson Printer Driver 2.16 through Software Update? I am having problems printing. It denotes an error message, specifically the rastertoescpii.app isn't working?

    Oops, wanted everyone to know that the driver that Software Update downloaded and installed was 2.18, not 2.16 (which was the last one that worked for me). I just got done downloading the 2.18 driver directly from the Apple support website and installing it. Guess what? My printer is now working and everything is fine. If you are having issues, I suggest this route. Guess I solved my own problem, but hope this helps someone else.

  • Installed Epson printer driver from two places..

    I recently upgraded to a new MacBook and Snow Leopard. I use an Epson printer & scanner, and an HP all-in-one at work. I didn't realize that 10.6.2 had built-in drivers and installed the Epson and HP drivers & software from the company websites (not apple.com). Then I saw the December Epson printer driver update on apple.com and downloaded that...
    Do I now have a bunch of repeat installs?
    Thanks!

    Hello Elise:
    Welcome to Apple discussions.
    Do I now have a bunch of repeat installs?
    Short answer - maybe.
    If the printers are working properly, I would not be concerned. If they are not, you could do a "find" (include system files in the search) and see what you have. You could also reinstall OS X 10.6 over your current system and then run software update. I would not do that (time involved) unless you are having problems.
    Barry

  • Epson Printer Driver v8.31 not showing up on my OSX 10.4.11

    When installing a new Epson Printer Driver v8.31 for my Workforce 630 all-in-one printer on my G5 OSX 10.4.11 Power MAC, along with Epson support on the phone, it is not showing up in my Utilities folder. Epson said I needed to contact MAC about changing some settings. The printer was working fine yesterday but not printing today .... like it wasn't there. After trying several things with Epson Support they said I should download the new driver and, as I said, with their guidance it wasn't showing up in my Utilities Folder. When I called MAC Support they referred me here to avoid paying $50 for their support. Any ideas?

    Whew, Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    Then remove the instance of the old one & try adding again.
    Might try these two...
    Mac OS X: About the Reset Printing System feature ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    Might try Printer Setup Repair 5.1...
    http://www.fixamac.net/software/index.html

  • Epson Printer Driver

    Since getting a Mac, I haven't been able to print directly onto CD's from my Epson Artisan 835 printer.
    I contacted Epson support and was told that I needed to download the Epson Mac printer driver and not the AirPrint driver that comes with Yosemite. They said that this driver is available on the app store but I see absolutely nothing on the store indicating an Epson printer driver.
    Has anyone else had this issue and been able to successfully print CD's on an Epson Artisan printer? If so, how did you resolve it?
    Thanks.

    The Artisan 835 is shown as supported on OS X: Printer and scanner software available for download - Apple Support, so if installing the drivers doesn't work, try using the driver for the 837.

  • Unable to download epson printer driver

    I am unable to download epson printer driver for rx580. Exe files not supported?
    other than boot camp and suggestions?

    Need a driver for Mac or Windows?
    For OS X v10.9 Mavericks >   http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=72106&infoType=Down loads
    Or here >   OS X: Printer and scanner software available for download
    .exe files are Windows only.

  • HT3669 Epson printer driver update for 10.8.5

    Apple lists "software available" to update my Epson Artisan 50 printer driver to version 9.0.  However, when I do an Apple software update the printer is not listed and does not update.  Epson website says all updates must be done through Apple.  I just recently got a new iMac with Mountain Lion and switched the printer from my old 10.4 iMac.  It no longer prints colors accurately so after going through all the standard "fixes" with Epson I hoped a driver update would help.  Any ideas?

    sorry - it is HP Photosmart D110a.  the HP website says that there is no additional software other than the Apple update:
    "With the release of OS X 10.8 Mountain Lion, HP is providing updated print drivers and software for your printer. These updates are available through Apple Software Update . You do not need to download a driver from HP to use your printer with Mountain Lion."
    source:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03379337&cc=us&dlc=en&lc=en &os=219&product=4023246&sw_lang=
    What functionality is available in the HP driver update through Apple Software Update?
    Depending on the printer functionality , one or more of the following software components might be included in the HP driver update for Mountain Lion:
    HP print driver
    HP fax driver
    HP Utility
    HP scanning files compatible with Apple’s Image Capture and Preview applications

  • Snow Leopard Updated Epson Printer Driver for Epson R800 - poor colour !

    I just installed through software update the latest epson printer drivers and, then, deleted the Epson R800 from my printer list and added it back in (with the new printer driver). I did find a slightly different printer dialog box and found the setting of "presets" worked now (it did not previously).
    However, when I printed out of Adobe Lightroom 2.6, using a custom paper profile and no colour management, that the print was faded, the colours were washed out. The result was unacceptable. After a few attempts, I looked in the Library folder, printers, epson and found two folders labeled, "inkjet printer" and "inkjet printer2". I determined that "inkjetprinter2" was the new folder and deleted it and deleted/added in my Epson r800 (using "inkjetprinter" folder. The resulting print was perfect.
    So, my conclusion is that the new driver is not functioning as it should and I would warn users to be prepared for problems. Am I missing something here? Could I have done the updating of the printer driver and printer differently?

    You may need to recalibrate you monitor color settings.
    One of the things that changed from 10.5 to 10.6 was gamma; if you are using calibration from 10.5 or earlier, the gamma change will throw off print colors.
    Personally, on my last 2 epson printers (R300, RX685), I've configured to let the printer color manage, and used the Vivid setting.
    Have not had any off colors, etc.

  • Mavericks and Epson Printer driver problem

    What is the issue with the Mavericks to Epson Pro Printer driver upgrade which produces the error message: "filter failure?" The result is no printing. After wading through blogs, chat rooms and both Epson and Apple sites, installing and reinstalling components, I found this cryptic Epson post, under FAQ:
    Q: Should I perform Apple's Software Update to get the latest OS X 10.10 printer software for my Epson Pro printer?
    A: No. Do not run the software update; the printer software for your product is only available from the Epson support site.
    Q: Should I remove previous versions of my Epson Pro printer software before I install the OS X 10.10 printer software?
    A: Yes, remove the previous versions of the printer software.
    It truly annoys me that this information is not available when we begin to update drivers and operating systems. My Epson Pro 3880 is now printing perfectly from Lightroom as it should.

    hi Frank,
    I just came across the same problem yesterday trying to get a driver for my Epson Photo R300 printer. It seems that OS 10.3.9 falls between the cracks as far as Epson is concerned - the CD that came with my printer stops at 10.2. and none of the driver downloads on the Epson website exactly fit 10.3.9. But I found a driver nonetheless through a google search and it's working for me now! So far so good anyway. It's at http://www.versiontracker.com/dyn/moreinfo/macosx/15970. Make sure to follow their directions carefully for installing the driver.
    Good luck,
    emma

Maybe you are looking for

  • Can multiple people work on one form

    We do onsite assessments. I am attempting to determine the best method to have all of my assessors' feedback compiled into one form. Any help will be much appreciated!

  • .mp2 video capture

    I'm looking for a plug-in or software/hardware that will let me capture video into premiere CS-5 as a .mp2 or .mpg file on a PC (actually a laptop). I don't want to have to encode, but just have the raw captured file be an .mp2.   Any ideas?

  • Label to FEC Binding

    Hi All I ve a doubt regarding who will do the Label to FEC bindnig.. Is it done by LDP or by FEC... I m in an assumption that LDP (or any signalling prtocol in that matter) will only distribute the labels for the prefixes in the routing table to its

  • Can't run JBoss

    Hi, Sorry to post this...it doesn't have anything to do with Java programming. But I about to pull my hair out! Trying to run Jboss. Had it up and running then I added some environment variables to my classpath...which caused JBoss to stop running do

  • Find Project From Issue?

    Hi  , I want to find project from Issue ? I have Issue guid number and ref guid number but ı am not finding project ? thanks for helps .