Epson printer PHOTO 710 problem

I cannot find the selection options for my printer (epson Photo 710W) . It sees it and prints but I cannot find the options of quality or speed etc.
It Works via WIFI but I am unable to choose the best quality. It just prints quickly but poorly.
Any ideas?
Pretty please!
JJ

You need to adjust the settings in your printer. The User Manual for the printer should have a section dealing with printer settings, and how to get there.
If you know the IP address of the printer, you may be able to get to the settings using that IP (192.168.x.y) in your browser. This image shows how it works with my Brother printer. Notice the blue "Printer Settings" link on the right.
The printer has to be connected and turned on. All I have to do is type in 192.168.2.24 (my printer IP) in my browser.

Similar Messages

Printing Photos Misalignment Problem

I was getting constant jams using 5x7glossy print paper
It would pring one than jam, print one or two then jam.
Now it prints but cuts off about two inches of the photo which appears on the print as just white space.
I am getting no warning or indication of a malfunction on the machine.
I thought it might correct itself, by turning the machine off and a minute later back on, by printing new photos, but so far nothing works.
It does not affect normal text printing.
Would appreciate any help I can get.
efx

Hello @efx,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the printing issue that you're experiencing when printing photos on glossy paper from your HP Officejet Pro 8600 Premium e-All-in-One. Because normal text printing works fine, I am inclined to say that there is either a setting issue within the program that you're printing from or a roller issue that is causing the paper to 'slip' when being printed. Can I please have you follow the steps below to resolve this printing issue.
Step 1: Update Firmware:
To start troubleshooting I am going to have you send the latest Firmware Programming Update to your printer. The Firmware is essentially the 'brains' of your printer. It controls what your printer does and how your printer does it. If there is an issue within the internal programming in your printer it can cause your HP Officejet to not respond properly. Please click here to download and install the latest Firmware. Once the Firmware Update Tool launches, please follow the onscreen prompts to 'send' the Firmware to your printer.
Once the Firmware has been successfully updated please try to print again on the glossy paper. Should the printout still show cut off please proceed to the next step.
Step 2: Check Paper:
Never overload the paper tray. The maximum capacity of the input tray is 250 sheets of paper
Do not push the paper too far into the tray
Load only one type of paper at a time in the paper tray. Never mix different types, weights, or sizes of paper
Do not use paper that is bent, torn, wrinkled or curled
You can only print specialty paper (Photo paper) from Tray 1 on your machine
Step 3: Test Copier:
To verify if this printing issue is being caused by a setting within the program that you're printing from on your computer I am going to have you perform a Copy on the glossy photo paper.
Load the glossy paper in your paper tray. Ensure that the glossy side is face down.
Load an image you wish to test Copy on the flatbed glass on your machine
Touch the Copy button on the front panel
Select Settings
Select Paper Size: 5 X 7 inches
Select Paper Type: choose the Premium Photo Paper, Advanced Photo Paper, Everyday Photo Paper, or just Photo Paper. Pick the option that matches your paper type.
Once adjustments have been made please run a Colour Copy or Black Copy
If the paper feeds and copies correctly, than we know with 100% certainty that the HP Officejets hardware is functioning properly. What program are you printing photos from on your computer?
If the paper fails to feed and copy correctly, than this issue is being caused by your printer. What weight and type of glossy photo paper are you using?
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

Crop to the print size before pringing
LN

I have a color management problem. I have OS X v 10.5, Adobe Photoshop Elements 6, and an Epson Stylus Photo R800. I want to print images I have scanned on a Epson Perfection 1660 Photo and corrected in Photoshop and get the colors accurate.

i have a color management problem. I have OS X v 10.5, Adobe Photoshop Elements 6, and an Epson Stylus Photo R800. I want to print images I have scanned on a Epson Perfection 1660 Photo and corrected in Photoshop and get the colors accurate.

I used the ColorSync utility to verify, and it came back with this report:
/Library/Printers/EPSON/InkjetPrinter/PrintingModule/SPR800_Core.plugin/Contents /Resources/ICCProfiles/SPR800 Standard.icc
   Tag 'dmnd': Tag size is not correct.
/Library/Application Support/Adobe/Color/Profiles/Recommended/CoatedFOGRA27.icc
   Tag 'desc': Tag size is not correct.
/Library/Printers/EPSON/InkjetPrinter/ICCProfiles/Standard.profiles/Contents/Res ources/Epson IJ Printer.icc
   Tag 'dmnd': Tag size is not correct.
/Library/Printers/EPSON/InkjetPrinter/PrintingModule/SPR800_Core.plugin/Contents /Resources/
I did not know what to do next. At the bottom of the window it said to go to www.apple.com/colorsync to find a tutorial. I got a message saying that link does not work. Tried to find the tutorial by searching at apple.com, but could not seem to locate it. Does anyone know what the report above means and what I should do about it?
Also, how to find that tutorial?
Re Using RGB all the way through, When I print from Photoshop Elements, I select Adobe RGB, Photoshop Manages under "Color Handling", Relative Colometric under "Intent" and "ColorSync" i the Epson printer box. Do you mean to do something different in this sequence?

Problems printing using iPhoto and Epson Stylus Photo R2400

I'm using OS 10.5.6 and iPhoto 8.0.2(402) to print pictures on my Epson Stylus Photo R2400.
I have other printers set up on this computer and they all print everything just fine regardless of the program I am using.
Using the Epson Stylus, I'm able to print from any other program than iPhoto.
When I try to print pictures from iPhoto, I get the error message...
can't open ` /private/var/spool/cups/tmp/4a18c65407c9b (the numbers at the end changes each time I try to print.
When I go in to check the folders out to see what might be causing the problem, the permissions on the folder cups and tmp have the following rights set up. system = Read & Write, _lp = No Access, everyone = No Access.
I've been able to set the everyone setting to equal Read & Write access, but I can't get the _lp access to change. When I reboot the computer, the everyone setting goes back to No Access.
Any ideas for how I can get this to work?
Thanks,
Bill

Welcome to the Apple Discussions. I don't have a tried and true fix for that but I would start with dumping the printer driver via the System/Print pane and then reinstall it. Go to the Epson site to download the latest driver for that particular model in case there's a newer one released.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

EPSON R300 PHOTO PRINTING PROBLEMS

i have an epson r300 printer connected through my wireless router to im imac but when i try to print, all this crazy text comes out rather than what i want.. so im guessing that it is corresponding with the printer to at least some point since i recognises i want to print but thats it? any help is appreciated.

I was having the same problem with my Epson printer. I went on the Epson website and downloaded the updated driver for Intel.

Epson Printer problem "Epson Stylus Photo PX710W" - solved!

Hello All,
My system: OS 10.6.4
I am posting this in the hope that it is useful to someone. Firstly, the printer is great. However, I had a really frustrating time trying to print via Iwork, Iphoto or print off an email directly in a web browser. Each time I did this an error appeared stating there was an error with the library and it failed to print. For me, I really wanted to be able to print from, say the Apple word processing programme "Pages", or print of emails with important details etc. So I persevered and finally came to a solution!
After contacting Epson (and Apple!) a few times one Epson guy gave me the following instructions. Please note I accept no loss or damage directly or indirectly from following this advice if you have the same problem of not being able to print out emails in browsers or print from Iwork, or Iphoto, whether you choose to follow this advice or not is solely your responsibility, however this worked for me:
EMAIL FROM THE EPSON ENGINEER
From the information you have provided, it would suggest that either a communication problem is present or the Mac is unable to display the EPSON driver in the Printer Browser.
It is recommended that all EPSON Printers are removed and re-installed and you repair the communications.
To uninstall your printer:
1. Make sure that the EPSON printer is connected to the Mac through a direct USB connection (not through a Hub or the Keyboard) and switched on.
2. Make sure that the Mac is on and booted.
3. In the Mac Hard Drive/Applications/Utilities open the Printer Set-up Utility.
4. Remove all the references to the printer model.
5. Disconnect the printer from the computer.
6. We will now remove the EPSON Printer driver from the system and delete the drivers that you downloaded.
Go to the Mac Hard Drive/Library/Printer and move the complete EPSON folder to the trash. Warning this removes all EPSON Printers.
7. Also remove any drivers that were previously downloaded to the trash if the file name does not match that from our web site.
8. Restart the Mac.
9. Empty the trash.
10. Now we will run a repair utility that may take up to 30 minutes to complete so please plan for this. Go to Mac Hard Drive/Applications/Utilities and open the Disk Utility.
11. Select Disk First Aid at the top of the dialogue box.
12. Select the Mac Hard Drive Icon in the left hand pane.
13. Select Repair Permissions at the bottom of the dialogue box.
14. When this has completed restart the Mac. Power the printer on and ensure that it is directly connected to a USB port on the Mac and not via a third party device such as a USB hub.
You will now need to download the driver/s from the Epson website. Please connect to the Epson website via the link below:
http://www.epson.co.uk/support
Type in your product in the search field and then select the correct model. Then select your operating system if this is not automatically selected. Then please click the down arrow next to drivers and downloads and download the printer driver for your printer and ensure this starts in the Download Manager. The file may be in a SIT format, which requires Stuffit Expander to expand the compressed files, if you have not installed Stuffit, it is available from:
http://www.stuffit.com/mac/expander
Please try the following to install and add the driver:
1. Locate the downloaded file, if in a SIT format, this requires Stuffit Expander so have Stuffit running.
2. If the file is a .DMG file, you do not require Stuffit, double-click the downloaded EPSON driver file and this will expand to reveal the dmg file and mounted drive.
3. Double-click the blue VISE icon when presented.
4. Follow the on screen prompts to install the driver, restarting the Mac when necessary.
5. Once restarted the driver needs adding to the printer list. To do this please go into the hard disk, go into the folder called Applications, double click on the folder called ‘Utilities’. You should see in this window the ‘Printer Setup Utility', double click on this icon. This will present the Printer List.
6. Delete any reference to the printer that may be on this list already as these may not be the genuine EPSON driver.
7. Click the add icon at the top and a dialogue box will appear, this will be the Printer Browser.
8. Next highlight the printer and then select add printer. Note: Do not choose a printer from the list of Epson printers. Your printer will not appear here, nor will the genuine Epson driver. You should be able to highlight the printer and choose 'Add'. If 'Add' is not available, leave the Printer Browser open and do not do anything else on the Mac, leave it open for about 10 minutes. When you come back to it, you should now find 'Add' available.
9. The printer should now be added to the printer list. Test the printer by highlighting it on the Printer List and selecting 'Utility'. The EPSON Printer Utility will appear, ensure paper is loaded and select to print a 'Nozzle Check'.
If you have an All in One, then to install the scanner component, locate the downloaded EPSON Scan driver and double-click this. The files will unstuff and a window will appear with the EPSON Scan Installer. Double-click this icon to initiate the installation.
11. Once installed, restart the Mac and the scanner should be ready to use. You can test this by going to: Applications : EPSON Scan.
If you require any further assistance please do not hesitate to contact me.
Regards
Steven Wood
e-Service Support Technician

Here was an easy-ish way which I did it:
Step 1) Install the bloated, piece of garbage Epson software so that you have a copy of the driver, or alternatively, just install the driver.
Step 2) go into your router (http://192.168.0.1, user: admin, pass: admin) and set up what's called static ID. Just figure out the MAC address of your printer and assign a unique static ID to it, ie 192.168.0.100
Step 3) go into system preferences> printers> add printer (+)> IP> Line Printer Daemon - LPD and as the address give it the static address you assigned (192.168.0.100). If you installed the driver, it should automatically detect and select it.
VOILA!

Problem to print with iPhoto and epson stylus photo RX620

I asked a question about the print with Iphoto. Larry gave some explainations but it still doesn't work. I can change the reglages with Safari, with Mail but not with Iphoto. So when I try to print photos, the reglage is standard and the result is bad. I would like to change the reglage, if i use glassy photo paper. With my PC, I have no problem to print with window or picassa. Thanks for your answer.

First I have no idea in the world what "reglage" is
But what ever printer specific options are available are supplied by the manafacturer's print driver and these are available on the last print window
LN

Problem using Print CD on Epson Stylus Photo RX700

I recently installed OS 10.5.1 (leopard) on my iMac (intel core duo) and my Epson Stylus Photo RX700 all-in-one printer appears to be working okay, except when I try to use the Print CD application, I get a message "Epson printer driver dealing with CD printing is not installed". I tried downloading updates from the epson.com site ( 1- Epson Easy Print v3.1bA for intel, 2- TWAIN Driver & Epson Scan Utility v3.02A, 3- Printer Driver v3.0aAS), but I still get the same message. Any suggestions? -Don

You need to add the Epson drivers from the OS X Install disk. Below is what Epson sent me. Note that when you re-add the Printers, there no longer is a Printer Set Up Utility, go into Preferences > Print & Fax and do it from there. Worked for me. Good Luck.
REMOVE FILES
1. Double click on the MAC HARD DRIVE.
2. Double click on the LIBRARY folder.
3. Double click on the PRINTERS folder.
4. Drag the EPSON folder to the trash can.
5. Close any open windows.
6. Double click on the MAC HARD DRIVE.
7. Double click on the LIBRARY folder.
8. Double click on the RECEIPTS folder.
9. Delete any EPSON receipts.
10. Close all open windows and restart your computer.
REINSTALL THE EPSON DRIVER PACKAGE
1. Insert your Mac OS X 10.4 Install disc. Open CD when it appears on the
desktop.
2. Find and double-click on the Optional Installs.mpkg.
3. After the installer opens, choose the following custom install options:
-Check PRINTER DRIVERS and use arrow next to this entry to expand this
category.
-Check EPSON below the PRINTER DRIVERS heading. (You do not need to
install other manufacturer's packages.)
4. Click INSTALL (or UPGRADE) and follow prompts to reinstall the resident
Epson printer driver package. Remove the OS CD and then restart the
computer after installation is complete.
READD THE PRINTER
1. Go into HD > Applications > Utilities and open the Printer Setup
Utility. The PRINTER LIST window appears.
2. Highlight and delete any existing references to your Epson printer. (If
you want to be thorough and do not have any other printers on the Mac,
choose PRINTER SETUP UTILITY from the top of the screen and RESET PRINTING
SYSTEM. Confirm resetting the system. This clears any existing printer
entries and queues. If you have other printers on the Mac and use this
reset, you will need to readd them later.)
3. Turn the printer OFF and back ON to make the Mac redetect it and add it
to the list automatically. (Do not change the PRINT USING field. Selecting
EPSON here would add a GIMP Print driver which does not support all of the
functions of the resident Epson driver. Epson does not support or recommend
these third party drivers.)
4. If you have other printers on the list, make the Epson entry the
default.
5. Close the Printer Setup Utility and try a test print from any OS X-based
application.
*NOTE: If the printer does not show up on the list, it may mean a lack of
detection. Ensure the printer is online (no red error lights) and connected
directly to the Mac. Try moving the cable end to other USB ports, if need
be. If you have not done so already, you can also try resetting the Printer
Setup Utility, as described above.
If you are working with a printer model which supports borderless and/or
roll paper printing options, you will be able to select these options in
the program you are printing from as you set up your print job.
1. Once you have an image or file open, go to File > Page Setup.
2. For FORMAT FOR select the Epson printer name (rather than ANY PRINTER)
3. Select the appropriate Paper Size. If your printer supports different
layout features, each paper size will have several different options. For
example, the 4x6 paper size will have an arrow pointing right which offers
choices of 4x6 Borderless, 4x6 Standard-Minimize Margins, etc. Pick the
paper type plus layout/margin option you want to use here.
4. Click OK on Page Setup. You are now ready to print.
Alborada

On i photo, I can't change the parametrage of my printer epson stylus photo RX620. My photos, when I print aren't ok. With my PC I had no probleme

I bought a Mac and wanted to print photos with Iphoto. The problem is that I can't change the parametrage as I can do with the mail or safari. The printer isn't done for special paper like photo paper. I called Apple but they didn't find the way to change. Has somebody an idea to do that. Thank you.

Try this patch.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Epson stylus photo r2880 printer problem

I changed the settings for printing color prints and now I can't correct what I've done. I was getting dark prints and so I figured I'd try a different setting... between "Printer manages colors" and "Photoshop manages colors". I've completely mucked things up so now I'm getting really dark prints with very little magenta and cyan. I'd like to return to what I had as I'm on a deadline but, I can't remember what the original setting were. Relative Colorimetric or Absolute? Was Black Point Compensation checked? Was 16 bit/channel checked? I'm so confused and I have prints that clients need. Thanks in advance for any HELP! Gregory

be sure to UnCheck the 16-bit option in the Epson print dialogs (it is a known bug that causes dark, off-colr prints)
try reviewing this CS6 Photoshop Manages Colors workflow
and the troubleshooting tips there
make sure you get a cean nozzel test pattern and are printing on the correct side of the paper...

Print quality on Epson Stylus Photo R800

Hi...
I'm using Lightroom 3.6 and an Epson Stylus Photo R800. This printer is capable of printing very high quality pictures, as I know by using it for almost 5 years.
I have bought Lightroom about 6 month ago. I have tried anything I can think off to get those fabulus pictures out of my Epson printer. I alterd color managment settings, changed print resolutions, downloaded new printerdriver, ... Nothing works. Print quality when printing from Lightroom is very poor. Bad colors (dark), stripes over the whole image, it looks like nothing realy.
One of the things that I noticed is that the maximum resolution for printing in LR is 720 ppi. My Epson is capable of 1550 ppi.
I see a lot of discussion going about print quality with lightroom... I think however this is a more basic problem. My print qualiti is realy very very bad...
Does anyone have similar problems or (even better) a hint to a solution?
Note,
When I export a picture to .jpg format (I shoot in RAW only), and print this directly from Windows, I do get the perfect picture a was used to... I cannot believe that Lightroom is unable to do the same.
Thanks!
Erik.

Sorry for calling you 'Frank' Frans...
Vriendelijke groet,
Erik Henken.
Op 3 jan. 2012 om 20:23 heeft "c.frans w" <[email protected]> het volgende geschreven:
Re: Print quality on Epson Stylus Photo R800
created by c.frans w in Photoshop Lightroom - View the full discussion
I would shine some light on your remark:
One of the things that I noticed is that the maximum resolution for printing in LR is 720 ppi. My Epson is capable of 1550 ppi.
I see a lot of discussion going about print quality with lightroom...
My name is :
Frans
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4116097#4116097
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4116097#4116097. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Epson Stylus Photo R2400 won't print large pages?

I recently upgraded to Mac OS X Leopard. I immediately had problems with printing to my Epson Stylus Photo R2400 as a print driver gutenprint had suddenly replace my Epson driver when going thu dialog to print. Called and Epson and they got me thru process of getting rid of the newly replaced gutenprint to an Epson driver. Problem is I can't print anything larger than an 8.5x11 page. The printer set up says and shows me that what I have set as an 11x17 or 13x19 is going to print. But all that prints on this large expensive paper is an area 8.5x8.5. No matter what I change in set up. Epson says they have done all they can do. (And I just found out last week they have replaced this printer with another printer). I have hundreds of dollars in newly purchased inks and I am wasting expensive paper.
Also I had to remove the patch for OS leopard to get the printer to work in this diminished capacity.
And my email signature disappeared. Can't get that back either.
But printer is my biggest problem. Any suggestions how to get this printer to work with this new OS leopard and print large sizes? I have deadlines and hate to outsource the printing when I could easily do it in house.

Well, you picked the very hardest way to do it, and as time goes on, you will probably discover many other things wrong with your system as well. You CANNOT go back to Tiger from Leopard via an archive and install; you have to wipe the drive and start over from scratch, and then transfer all your data over from a backup and reinstall most, if not all, of your applications so the right elements are in the right places. Even so you'll never get your system exactly back to where it was, unless you had a perfect bootable Tiger backup (via SuperDuper) and merely restored from that. Obviously whatever Leopard element that killed your printing capability is still on your frankenstein system of BOTH Tiger and Leopard parts.
There are hundreds of posts on the issue of reverting to Tiger from Leopard, many quite detailed. So many things are changed from upgrading from one to the other that what you attempted (unless you completely wiped the drive and all your data) has always proven disastrous, which is why I highly recommended against it after reading hundreds of horror stories here.
I suggest doing a search at downgrading from Leopard to Tiger, following those instructions if you can, and making the best of it. You'll find that springing the $200 for an external drive would have been a much better and easier solution, because it can come in very handy if you ever need to do any maintenance on your internal hard drive, or if some update or problems kill your internal drive and you can't even boot the system. Not to mention sooner or later always needing more storage capability, and even a drive for reliable backups.
I would never dream of attempting a downgrade or needing to do it in the first place (having taken precautions as to never have to), so I can't give you any further advice than that.

After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault

After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault.
This is the message from Epson:
The driver update 2.7 was released by Apple. The driver released by Epson is available for download from the Epson Australia web site. It is the Apple update driver download that has caused the problem.

After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault.
This is the message from Epson:
The driver update 2.7 was released by Apple. The driver released by Epson is available for download from the Epson Australia web site. It is the Apple update driver download that has caused the problem.

Can't print using Epson Stylus Photo R300

I am new to Mac ownership and have been having issues since updating to OS10.4.9. I have an Epson Stylus Photo R300 and have been using CUPS and Gimprint to print w/o a problem (OK, I had to call tech support and spent 10 hours getting it figured out) Now, for no reason my computer won't print again. I'm not sure what the issue is. Nothing has changed. I use a wireless print server connected to my wireless router. I've tried everything today. I'd removed all print drivers, CUPS and Gimprint and reinstalled. I've tried checking to see if the router has a different IP but nothing is working.
When I go to print the utility will spool the printing and then tell me the printer is busy and it will try again later.. then it times out. I've cleared the print history and jobs but still get the message. The only time I got anything close to printing was when I selected default browser, selected the wireless router but it chose Apple talk at the communication so I just got syntax stuff to print. Nothing in English.
So any help from ANYONE would be appreciative because Apple wasn't helpful when I called today.

Is there any reason why you're not using the standard Epson supported driver? It's available here

Epson printer PHOTO 710 problem

Similar Messages

Maybe you are looking for