Epson Printer will not work with Pagemaker 6.5
I am having a problem with my Mac I run Jaguar 1.3X on it with OS9 which pagemaker runs under.
I can print with every application and print information from the internet, but can not print my PageMaker files. Is there a fix out there for this or do I have to upgrade to a newer OS?
I get an error like this everytime I try to print using Pagemaker 6.5
*"Cannot access current printer"*
*"Cannot access printer"*
8513:5221
Some programs do not work as well under Classic as they do under native OS9 and you may be encountering this. Pagemaker may be having a hard time talking to the OSX generation of printer drivers. You can check [Gutenprint drivers|http://gimp-print.sourceforge.net/MacOSX.php] for an alternate set of drivers, but I don't know much about them or Jaguar OS... I would not be over optimistic about getting a newer version of OSX to assist. What version of OS9 are you using for Classic? You could try changing that, especially if there is a newer version.
Similar Messages
-
I upgraded from leopard to lion and my epson printer will not work. I get a communication error
I upgraded from leopard to lion and my Epson printer will not work. I get a error message comunication error. What can Ido to fix this I bought a new USB cord and it did no good.
I suddenly had the same thing happen. I've had my new iMac for 3 months and at first my Epson Artisan 50 worked okay then yesterday I started getting the same error message other people on this support site have gotten. I tried ALL the advice given (deleating the Epson files from the library folder, etc. reinstalling older software) and nothing worked. With the newest iMac (and operating system) you cannot pick and choose which version of Epson software you want. You must use the 10.8 version or it simply will not open when you've downloaded it. Finally I found the comment above by den.thed and tried the OS X Mountain Lion: Reset the printing system suggested. As much as I hated to lose all my printing presets that took a lot of expiermentation to set up, I was desperate. I tried it and it worked. Now I just have to consult my old computer and try to recreate all my printing set ups. So to others with Epson / Apple 10.8 issues this may help when everything else fails. Thanks den.thed for your advice.
-
My Epson Artisan 610 printer will not work with my new iPad 2. Not AirPrint compatible. Only certain HP printers work. Are there any solutions to this other than buying an HP printer?
Epson iPrint doesn't allow printing directly from something like Photos, you have to call up iPrint and THEN select Photos, but it does work and very well. For my Epson Artisan 725, I had it print a photo, best quality, on 4x6 Premium Photo Paper, and it DID automatically select the right "tray" with my photo paper.
Thanks for posting this suggestion.
This was SUPPOSE to be replying to the following:
app store epson iprint version 2.0 lets you print websites, photos, and more. -
Printer will not work after update to Mavericks
I have a macbook pro and an HP7280 printer connected wirelessly. After upgrading to Mavericks the printer will not work. The first time I used it the system upgraded automatically (I forget what it said but it just went ahead and did some upgrading) When I clicked on something to print it did recognized the printer but just scrolled and scrolled and never printed. So I deleted the printer and reset the system and then added the printer back on - same thing. Any ideas??
It means there is no issue with the driver you are using and with it working correctly on Mavericks. So you have a network issue with the printer queue you are using. Normally a reset of the printing system and re-adding the printer would be enough to get things working again. But since you have done this and your issue is not resolved, there must be some other gremlins in the system.
With the HP connected to the network, if you know its IP address you can enter this as a URL into a web browser. This should result in you connecting to the internal web page of the HP. Does this work? -
HP-2840 needs new drum (Q3964A) and I am told my printer will not work when I install a new drum
My HP2840 laser jet All-InOne has been telling me for 6 months that I need a new drum. I was waiting until I saw an issue with my print quality (which I never had a problem) and now my printer will not work unless I replace the drum.
A friend told me that even after installing a new OEM drum, that my printer will still not work unless I call HP and pay for them to tell me how to make it work.
Is that true?
I need help fast cause now my wife is really angry that I "broke" the printer!
Thanks in advance!mmcnel01 wrote:
Is this an official HP forum?
If so, is there anyone from HP - maybe a moderator or someone, that will respond to my question?
This is a user to user forum and is not an official link to HP support. I would suggest that you contact HP as shown here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Printer will not work: error code 0xc19a0022
Printer will not work: error code 0xc19a0022
Hello citizenED,
Welcome to the HP Forums.
I see that you are getting the error code " 0xc19a0022 " .
I do have a few steps that we can try.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with a 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error ...
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
Canon pixma IP4000R will not work with Snow Leopard
After upgrading to Snow Leopard, my Canon IP4000r printer will not work. I have tried both the Canon Printer Drivers 2.3 (my printer is listed) from Apple and the latest printer driver from Canon. There are multiple problems ... the first thing I noticed is that not all of the printer options are available on the print dialog. When I tried to print, I got "fatal::internal error -9660."
It looks like both drivers I've tried so far are CUPS (which is probably why all of the printer options are not supported).
Anyone have any ideas? Other than buying a new printer ...
nojp.co.canon.bj.print.PrintSettings.BJThrougoutPage..b. media=na-letter PaperInfoIsSuggested..b. pserrorhandler-requested=standard sides=one-sided job-uuid=urn:uuid:f3c1ff27-c401-385e-4a60-d6659c8dcfff job-originating-host-name=localhost time-at-creation=1289542148 time-at-processing=1289542149 job-impressions=1 com.apple.print.PrintSettings.PMTotalSidesImaged..n.=1 com.apple.print.PrintSettings.PMTotalBeginPages..n.=1 Duplex=None PageSize=na-letter"
D [12/Nov/2010:00:09:10 -0600] [Job 5] argv[6]="/private/var/spool/cups/d00005-001"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[0]="<CFProcessPath>"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[2]="CUPS_DATADIR=/usr/share/cups"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[8]="CUPS_STATEDIR=/private/etc/cups"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[9]="HOME=/private/var/spool/cups/tmp"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[11]="[email protected]"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[12]="SOFTWARE=CUPS/1.4.5"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[14]="USER=root"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[15]="CUPS_SERVER=/private/var/run/cupsd"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[17]="IPP_PORT=631"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[18]="CHARSET=utf-8"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[19]="LANG=en_US.UTF-8"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[20]="APPLE_LANGUAGE=en-US"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[21]="PPD=/private/etc/cups/ppd/iP4000R_00_00_85_4f_d4_8e.ppd"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[22]="RIPMAXCACHE=8m"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[23]="CONTENT_TYPE=application/pdf"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[24]="DEVICE_URI=file:///dev/null"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[25]="PRINTER_INFO=iP4000R (00.00.85.4f.d4.8e)"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[26]="PRINTER_LOCATION="
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[27]="PRINTER=iP4000R_00_00_85_4f_d4_8e"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[28]="CUPS_FILETYPE=document"
D [12/Nov/2010:00:09:10 -0600] [Job 5] envp[29]="FINALCONTENT_TYPE=printer/iP4000R__00_00_85_4f_d4_8e"
D [12/Nov/2010:00:09:10 -0600] [Job 5] Started filter /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr (PID 4367)
D [12/Nov/2010:00:09:10 -0600] [Job 5] JobManager converting file: /private/var/spool/cups/d00005-001 (7 args)
D [12/Nov/2010:00:09:10 -0600] [Job 5] PrintJobMgr trying ppc architecture...
D [12/Nov/2010:00:09:10 -0600] [Job 5] JobManager converting file: /private/var/spool/cups/d00005-001 (7 args)
D [12/Nov/2010:00:09:10 -0600] [Job 5] fatal::internal error -9660
D [12/Nov/2010:00:09:10 -0600] [Job 5] End of messages
D [12/Nov/2010:00:09:10 -0600] [Job 5] printer-state=3(idle)
D [12/Nov/2010:00:09:10 -0600] [Job 5] printer-state-message="/System/Library/Printers/Libraries/PrintJobMgr/Contents/ MacOS/PrintJobMgr failed"
D [12/Nov/2010:00:09:10 -0600] [Job 5] printer-state-reasons=noneLiz Gensheimer wrote:
After upgrading to Snow Leopard, my Canon IP4000r printer will not work. I have tried both the Canon Printer Drivers 2.3 (my printer is listed) from Apple and the latest printer driver from Canon.
The driver version provided by Canon is v10.26.x while the update provided by Apple will increase the version to 10.30.3.0. The v10.26 and v10.30 drivers provide all the features that the previous v4.8.3 driver for OS X 10.5 and earlier provided. However the layout for these menus is definitely different.
Also, a lot of user who upgrade from a previous OS X may not realise that the default print dialog is in a minimised view. You need to press the disclosure triangle next to the printer name to get the expanded view.
When I tried to print, I got "fatal::internal error -9660."
I suggest you try a printer reset.
1. Open System Preferences > Print & Fax
2. Move your mouse over the Printers list
3. Hold down the Control button and click the mouse
4. Click "Reset printing system ..."
5. Restart your Mac
This will remove your iP4000R print queue but not the printer drivers. So you will only need to add the queue again.
It looks like both drivers I've tried so far are CUPS (which is probably why all of the printer options are not supported).
Yes they are both CUPS by name as they are both made by Canon. But this is not your issue. If you believe that a particular option is not available then please reply with what that is. -
Linotype Decoration Pi will not work with InDesign CS6
Linotype Decoration Pi Font will not work with InDesign CS6. If I buy a new version from the Sdobr store, will it work?
Has the font ever worked in CS6? If not, did it work in a previous version? Did it ever work in any version of ID using your current OS version? I ask the last question because I helped someone on another forum today that had a font that did not survive migration on their Mac. In their case, the font was selectable but the application would crash exporting to PDF or printing.
I'm using a PC. It works here.
It is listed along with the fonts that start with D here.
Mike -
Since upgrading to OS X yosemite my printer will not work.
Since upgrading to OS X Yosemite my printer will not work.
I found the solution in another thread. Thanks to frankglyn who posted it there.
I've just copied it here, as this seems to be the most active thread on this subject.
The solution (steps A to C) worked fine for me and others and should work for you as well, until Kodak will come with an updated driver. Then, you can revert the changes as also described below (steps 1 to 7)
A) in Spotlight Type Terminal and then press enter.
This should bring up the terminal window/program.
B) In the Terminal type sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf'
It will ask for your password.
C) After that type following: sudo launchctl stop org.cups.cupsd
After that if you are lucky the printer driver should start to work. (which it did in my case)
I hope this works out for you, if not then you can do following to revert the changes:
In case you want/have to revert the changes:
1) Open the terminal as usual (Spotlight type Terminal hit enter and wait for the terminal window to appear)
2) then type: cd /etc/cups
3) then type: sudo nano cups-files.conf
4) 'type in your password'
This brings up a command line editor which you can use to edit the file
5) Remove the last line which says Sandboxing Relaxed
6) press 'ctrl x'
And then confirm with y when being asked if you want to save the changes
7) after that type sudo launchctl start org.cups.cupsd -
I have a Macbook and iPhone and like to back up to iCloud. However, my work computer runs Outlook 2003, which I know will not work with the iCloud. The company has no plans to update anytime soon. Since the calendar and contact list on my office computer are my primay ones, I hard sync through iTunes. The problem is that any data synced from Outlook 2003 to the iPhone from iTunes does NOT later backup to iCloud. Is there a solution?
I have the same problem with Outlook 2003 and Win XP which the multinational organisation I work for standardises on and will probably stay with forever!
-
I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?
You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. After you finish Setup Assistant will complete the installation after which
you will be running a fresh install of OS X. You can now begin the update process
by opening Software Update and installing all recommended updates to bring your
installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install -
when I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please
Ive got the same problem, just got my iphone unlocked, and they told me to sync it to itunes to get it permently unlocked, well everytime i plug my iphone in it says; it wont work as it needs up dating to 10.6.3, which i have already updated, but still doesnt work, so how can i get my phone unlocked?
-
TS1538 Ipod Classic will not work with Windows 8. Is there a fix?
Itunes will not work with Windows 8. I have the latest version of itunes!
When will the fix be available?
When I try to Sync my ipod, nothing happens.Hi,
You can download the latest official Firefox here: https://www.mozilla.org/en-US/firefox/new/
You may also have to install [http://www.oracle.com/technetwork/java/javase/downloads/jre7u9-downloads-1859586.html Java] (choose either Windows x86 Offline or Windows x86 Online), and [http://get.adobe.com/flashplayer/ Flash] (choose the Firefox version and also deselect extras).
For the Firefox metro version, please see [https://wiki.mozilla.org/Firefox/Windows_8_Integration#Elm_Nightly_Builds this]. You can install and use it along with the other version. -
Firefox 4 will not work with my OSX 10.4.11. I cannot now get back the old version. what can I do?
Just downloaded Firefox 4. It replaced the older version on my mac but will not work with my current version of OSX.
I cannot find where I can download the older version so now I do not have Firefox. Can you help>Perfect! This works!!! Mozilla... remember many Mac users keep machines a looooong time! They are like an old Mercedes. They never die.
Maybe you are looking for
-
Flex encounters "Security error accessing url.Unable to load WSDL"
i have created a flex application which connects to SAP via web service. when i try to run my flex application i encounter the following error. "Security error accessing url.Unable to load WSDL" i went through various posts relating a BSP application
-
Error 7 occurred at Invoke Node in Dist read linkages.vi->Dist Cmp Settings to Disk Hier.vi->Build Application.vi???? Hi I do not understand how to resolve this nagging problem. I run the program in the development time and it all goes smoothly. Howe
-
How to disable attachment preview in Outlook 2013 - group policy
How do I disable attachment preview in Outlook 2013 in GPO?
-
Current date as page parameter
Hi, Anyone knows wether it is possible to pass the current date as a page parameter to a portlet (for example the omniportlet). System variables won't do it. Thanx Our portal: www.vcob.be
-
Hello! Each time I try to download ANY program into the dbx I got the following error: Annotation: Exception occurred in Request Processor java.lang.NoClassDefFoundError at com.sun.tools.debugger.dbxgui.utils.IpeUtils.getUnixEnv(IpeUtils.java:51