Epson Pro 4000 will not print

I have been searching and calling epson about the drivers for the 4000 using 10.6 and with no luck and a time frame they told me to contact apple that they are going to supply one I would like to know if there is a drive for me to print with my equipment or am I just going to have to install the old operating system?
can you give me a solution?
thank you

What type of 4000 is it? You're sure it's not listed here:
http://support.apple.com/kb/HT3669
Apple won't write a driver, it will have to come from Epson. If Epson releases a driver, Apple will make it available with Software Update.

Similar Messages

  • My HP Pro 8500 will not print in blue. All new cartridges installed.

    My HP Pro 8500 will not print the a blue color, it comes out pint where it should be blue.  Installed all new cartridges and still does the same thing.

    Hi Calabasas,
    Welcome to the HP Forums!
    I understand that your printer is experiencing a defect in the print quality, and I would be happy to assist you!
    Please follow this document on Troubleshooting Print Quality Issues. If you have completed all of the steps in troubleshooting and the blue still comes out as pink, please call our technical support at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
    http://www.hp.com/cgi-bin/hpsupport/index.pl
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • HP Office Jet Pro 8610 will not print but will only fax

    We have a HP Office Pro Jet 8610 and it worked fine until we hooked it up as a fax machine also on Thursday. 
    It used to copy, print, scan perfectly but we need a new fax machine so we went out and bought the phone cord and hooked up a fax line and telephone with built in answering to the Office Jet and the fax works , but now it will not print a document from Open Office to the printer because it tries to make a fax cover page.
    I have run out of ideas can you please help?
    This question was solved.
    View Solution.

    There are two "printer" drivers on there, to print, choose the "Officejet Pro 8610 Printer" instead of the "Officejet Pro 8610 FAX". You probably set the second one as default when the fax function is added, which is for PC fax. If you use the print function more often than fax, make the non-fax one the default printer.

  • Officejet Pro L7590 will not print in black

    I have an All in One Officejet Pro L7590.  When I first got the printer 3 months ago, everything was printing perfectly.  Now, out of nowhere, it will not print in black.  It only prints in color.  I have done all the aligning, printhead cleaning, changing cartridges, etc.  I am at a loss as to what to do.  Has anyone had this problem with this model?  Can anyone help?  Thank you.  

    Thank you so much for responding.  After (3) HP printers all having the same difficulty and support not knowing what the problem was, (also many hours with Support) I determined it was the printheads also.  The printheads don't seem to last very long and can be more costly than the printer itself if you have to keep replacing them.  I changed over to a laser jet.  No printheads needed.  And I have not had any problems so far. Just need to replace the ink cartridges when they run out.  I have the HP Color LaserJet CP1518ni.   

  • HP Officejet Pro L7580-Will not print black ink after I have replaced cartridge.

    I Have an Officejet Pro L7580. It worked fine until I replaced the black ink cartridge. After replacing it I cannot print in black. I printed 1 or 2 sheets when first replaced-then it stopped (only the black will not print). After a hard reset it printed 1 or 2 sheets then stopped (printing the black). The quality test page did not print any black and there were globs of black ink on the page. The color prints fine and it show a full black cartridge. Followed multiple troubleshooting steps, to no avail. 

    Hi melissaccss,
    I see you have replaced a cartridge and can no longer print black ink. I appreciate the troubleshooting you have done so far, but please take a look at the following document to see if you have done all that can be done; Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems.
    If the issue persists, I recommend calling HP and letting the know the issue as well as the steps you have already completed. It may be helpful to even let them know you completed all of the steps in HP document #c01957673.
    If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • HP OfficeJet Pro 8600 Will Not Print Wirelessly

    Hi.  I have read other threads on this forum with suggested fixes from HP employees and tried them.  I have run the tool which found no errors.  My firewall is off.  I have installed the latest Adobe and uninstalled then reinstalled the printer software.  I have followed instructions in book re: turning off computer, router, printer, etc.  I can see the IP address for the printer in IE.
    Still, this brand new printer will not print wirelessly or otherwise from my hp laptop.  VERY frustrating.  I have spent hours trying work arounds for a brand new computer.  I would greatly appreciate a response regarding how to resolve this problem.  Thank you.

    I have seen cases where a troubled install went through flawlessly after the computer was reimaged.  That may be an option to consider. 
    I did want to make sure that you had the most current firmware version and it looks like you do.
    Before a reimage, you could uninstall Officejet Pro 8600 programs (if there are any) and download and install the drivers for your printer from hp.com.  Click here for the HP Officejet Pro Full Feature Software and Driver.  By doing this, you would have the most up-to-date drivers.  Sometimes a download will work where a disk does not.  It you do decide to reimage, I highly recommend the above download for the installation.
    Let me know what happens.
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input ! ___________________________________ _____
    Thank You,
    Rich
    Expert

  • HP Officejet Pro 8500 will not print documents/reports for Quicken 2008

    New computer will not print in Quicken 2008 Software Program.  Attempted all possible solutions. I have Windows 7 installed.  I downloaded and installed the new software  for HP Office Pro 8500 to work with the Windows 7.  The Quicken 2008 Software Program stopped printing as a result.  All other software programs prints perfectly. Help!  I get no support from Quicken Help. 
    Message Edited by Tiger-Pope on 10-28-2009 03:38 PM
    This question was solved.
    View Solution.

    Tiger-Pope wrote:
    New computer will not print in Quicken 2008 Software Program.  Attempted all possible solutions. I have Windows 7 installed.  I downloaded and installed the new software  for HP Office Pro 8500 to work with the Windows 7.  The Quicken 2008 Software Program stopped printing as a result.  All other software programs prints perfectly. Help!  I get no support from Quicken Help. 
    Do you have the 64 bit version of WIn 7?  This thread suggests printing from the 64 bit Vista (and WIn 7 would be similar) is an issue in Quicken 2008 and 2009.  The thread suggests there is a solution but the link requires registering for the Quicken forum and that did not work for me this afternoon.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Acrobat Pro 8 will not print some graphics, any ideas?

    I am printing from Word 2007 to an Acrobat Pro 8 PDF.   When I do so, some of the graphics will not show up.   They seem to be in the document as when I highlight them, they show they are blocked and I can actually copy the stuff by highlighting it and copying, but it will not print or display.
    This seems to be a new problem, as it worked fine, then I am not sure what trigered it, but now it will not print all the graphics.   The graphics are just JPGs
    Note the document looks good on the screen, but when I create a PDF or print the PDF, it will not print.
    I also see this a lot when I use my PrintShop Mail program, which uses Acrobat to genterate it files.
    Any ideas?
    Regards,
    Geoff

    Since Acrobat is not an Apple product, you would probably be better off posting your question on Adobe's own forums as they would be geared more toward the issue than an Apple forum:
    http://www.adobeforums.com

  • My epson WF-3540  will not print.

    After updating to  Yosemite. My Epson will not print.,even  with the  the epson  2.19 driver update. 
    None of My devices can find my printer. It  only works with USB plug directly to my iMac.  .( iMac (24-inch Mid 2007,Processor-2.8 GHz Intel Core 2 Duo)
    I've reinstalled software.
    Unplugged  and reconnected  cables.
    Print out from printer says everything  passes ,network  is good, but epson connect is disabled ?
    What can I do next?
    Model Name: iMac
      Model Identifier: iMac7,1
      Processor Name: I
      Processor Speed: 2.8
      Number of Processors: 1
      Total Number of Cores: 2
      L2 Cache: 4 MB
      Memory: 2 GB
      Bus Speed: 800 MHz
      Boot ROM Version: IM7
      SMC Version (syste
    Model Name: iMac
      Model Identifier: iMac7,1
      Processor Na

    Network Printer Troubleshooting
    If you have the printers IP address open Terminal (Applications/Utilities) and at the prompt type: ping {printerIP}. You will get a reply or failure.
    Printer Troubleshooting - Yosemite
    If you haven't done so already, try resetting the printing system.
    OS X Mavericks: Reset the printing system  also Yosemite

  • Epson Stylus CX7300 will not print after software update

    After doing the latest update for my Epson Stylus CX7300 printer it will not print.  When i open the printer utility it comes up with a communication error.  I can still scan documents but i can't print or even print a test page, check ink levels etc.

    Hi Kerry Bonney,
    Welcome to the Apple Support Communities!
    If you are having issues printing after running a software update I would recommend using the troubleshooting steps in the following article. It sounds like you have already completed some of these steps, but I would recommend reading over and working through the steps provided in this article.
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/TS3147
    Have a great day,
    Joe

  • Epson xp-312 will not print wireless with 10.9

    i am new to the mac so i got a epson xp-312 from our local shop and installed the driver what is the lastest from epson but it will not work wireless and will not find the printer. I have gone to network settings and you can trace it and it will come back saying that the ip address belongs to the epson but when you ping it it comes back 100% fail you can print from a windows pc wireless with no problem please help the driver i have tried is 2.15.1 dated 11th sept 2013 thank you in advance for any help

    alamondo wrote:
    i have a ipad and a iphone and they both can not find the printer ...
    I am assuming (hoping!) you mean you have installed the Epson iPrint app on one or both of your iPad and/or iPhone, and Epson iPrint does not detect the printer.
    If that's true, then Mavericks is definitely not the problem!  Neither the iPhone nor iPad (nor Epson iPrint) rely on Mavericks.
    Hunt for your printer using Epson iPrint.  Make sure your pinter is on, tap "Scan", then tap the gear-like icon in iPrint to hunt for it.

  • New Officejet Pro 6830 will not print via USB connection. It scans great to PC. It copies.

    New HP Officejet Pro 6830 for user to have local USB printer/scanner at desk.  User runs win 7 64 bit on a network.  Raninstall through setup.exe.  Followed steps, connected printer via USB when it said to and it detected it and finished install.You can use HP Scan software and it scans to the PC perfectly.  It will not print from any application or even a testpage from the Printer Properties page.  If you go to the maintenance application it will print status and test page.  If you run HP Scan and Print doctor it does it's thing, gives all Green Check marks and lets you print a test page fine, but it stillwill not print even a test page from the printer properties page (start/Devices and  Pritners/right click on Officejet Pro 6830, select Printer Properties for Officejet Pro 6830 (not the Fax 6830), and click print test page.   It does not seethe printer.  It is a networked PC and has network defined HP network printers as well but user wanted a printer/scanner at his desk.   I actually took the unit and connected to my laptop which is same win 7 64 bit platform and it does the same thing.   I disable the virus protection to do the install so that is not an issue.  It clearly sees and installs the printer, andlike I said the HP Scan works fine so it is connected via the USB to the PC, but it will not print.   I have tried to install from the CD, and removed device and tried to install from the new downloaded drivers as well and it just does not want to print.I have conected to different USB ports, and like I said actually tried it on a different PC and had same results. Guidance certainly would be appreciated.

    Hi , I see by your post that you can scan, but are unable to print over the USB connection. I would be happy to help you.
    I have provided a document for setting Security permissions for printing to see if that will help. If the issue persists, reinstall the printer on the Administrator Account to see if you have the same results.Unlock Hidden Administrator Account and install the printer on this account:  Go to your Start menu and under the 'search programs and files' box type CMD. CMD will populate as a search option above, just right click on it and 'run as administrator'. Once CMD (Command Prompt) opens, type net user administrator /active:yes and hit enter. Next, close CMD and restart your computer. When your computer comes on log into the new account that should show. It will be called Administrator and will not have a password on it. If your computer automatically logs into your account after restart than go to your start menu click the arrow beside 'shutdown' and choose 'switch user'. Now log into the Administrator account we just unlocked.Under the Administrator account, install the printer software. Test the printer. To turn off the Admin account start back at step 1 and type in net user administrator /active:no.Please let me know the outcome. If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.

  • HT4356 Epson Artisan 837 will not print from IPhone

    I have an IPhone 5 and an Epson Artisan 837 printer. When I attempt to print from my Ihone 5 I always receive an error message:
    "out of paper, paper jammed, or incorrect paper size".
    In reality,it is none of these things. I can print from my IPhone 5 to my Brother printer via the router connected to my computer, but the Epson is via WiFi/AirPrint.
    Someone tried printing from their IPhone 5 to my Epson and it worked perfectly, but it WILL NOT PRINT FROM MY IPHONE 5.

    Try GutenPrint:
    Click here to begin autodownload: http://tinyurl.com/8ctlaw.
    You might also benefit from installing Usbtb & the latest Ghostscript & CUPS:
    Click here to begin autodownload: http://tinyurl.com/9mgm38.
    Here's a link to GNU Ghostscript 8.63: http://tinyurl.com/9g9tx9.
    Here's a link to CUPS 1.3.9: http://tinyurl.com/yuckcm.
    Here's a link to Foomatic-RIP:
    Click here to begin autodownload: http://tinyurl.com/4ep5dv.
    Finally here's a link to HPIJS:
    Click here to begin autodownload: http://tinyurl.com/ayhp9z.
    You should find that your HP printers print much faster now since Usbtb is faster than Apple's built-in USB drivers that they ship with Leopard by default.
    <Edited by Moderator>

  • Hp officejet pro k550 will not print a test page using control keys on the printer.

    How do I print a test page to ensure that this printer is still operational?
     I have tried all instructions for clearing the printer of possible jams, removed and reinserted the print heads, and cleaned the rollers.  When pressing the appropriate keys on the front of the printer, it will not print a test page.  and no error lights appear.
    The printer has been connected to a different computer and ceased working last summer.  The printer would not respond to commands from the computer nor would it respond to keys on the front of the printer itself.  I can get the printhead to move using the controls on the front of the printer, however.  The printer is not currently connected to any computer and the nearest computer does not have the appropriate drivers installed.  Originally the printer was connected to a Dell desktop running Windows XP (sp 3).
    This question was solved.
    View Solution.

    Here's how to print a self-test page from the control panel.  
    I am an HP employee.

  • Officejet Pro 8500A will not print

    It will not print without running HPPS Doctor and after it runs it says to disconnect power, reconnect and then run test again.  It will then print a few documents and the will say "printing" but will not print?????  I have to the same thing every time in order to print????? Help!!

    Sorry that you are having a problem with the printer not printing. 
    Try to stop and restart your printer spooler. 
    1. Click on start menu on the computer. 
    2. Type in SERVICES in the search bar. 
    3. Click on it, and scroll down to Printer Spooler. 
    4. Stop it and restart it. 
    Let me know if this helps. 
    **Click the KUDOS star on the left to say 'Thanks'**
    Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Maybe you are looking for