Epson R1900 will not print or update

Can’t get my R1900 to print. Utility see the printer and will tell me my ink level. But can’t get it to print anything.
Apples Epson update did nothing.
Epson driver installers crash/quit after verifying password. Did the Rosetta thing, tried under safeboot and even tried to install drivers on my MacBook Pro. They still quit. Epson is at a loose and says to ask Apple...
Any ideas people?

The latest R1900 drivers are available via Apple's Software Update. However before trying to download them from there, you should remove all drivers from your system. Here's how to reset your printing system:
1. Control-click or right-click a print queue in the ""Printers"" pane.
2. Choose ""Reset printing system..."" from the contextual menu.
3. Click ""OK"" in the ""Are you sure..."" confirmation sheet.
You can follow the troubleshooting steps in the Apple articles:
http://support.apple.com/kb/HT3669?viewlocale=en_US
http://support.apple.com/kb/HT3771
If all of this doesn't work you can see if the issue is with the user account or system wide by creating a new OSX user account and see if that user has the same issue.
Let me know if any of these steps worked for you.
Syd

Similar Messages

My Epson 3880 will not print decent prints.

I have a macbook pro I updated to Lion 10.7.4 and now my epson 3880 will not print decent prints! Worked fine before but I cannot load profiles ofr paper now and therefore cannot get quality prints now! I am an artist and this is a large part of my business is there an answer for this issue?
<Re-Titled by Host>

Welcome myazel!
myazel wrote:
... I cannot load profiles ofr paper now ... is there an answer for this issue?
I downloaded a dmg file containing Epson ICC profiles . After running the installer, I found the path to the profiles is
HD/Library/ColorSync/Profiles/EPSON Stylus Pro 3880/
HTH

Epson rx680 will not print after apple update print driver

I have an Epson RX680 which worked perfectly until I allowed the latest apple update to be installed with newest epson printer driver. It now will not print but comes back with a rasce blah blah error. Tried restoring to the previous software but to no avail.

https://discussions.apple.com/thread/5233149

Can't print- 27" 2013 iMac-my epson stylus 3800 pro will not print-i updated driver n added printer in syst prefs-When i print the printer queue opens and shows the job as "stopped"-Supply level "information is not available"-maybe part of problem...thx

I can't print from my 27" late 2013 iMac. I am using an epson stylus 3800 pro. I updated driver and added printer in system preferences. When i print the printer queue opens and shows the job as "stopped". Supply level shows "information is not available which maybe part of problem...thank you

The first thing you could try is a reset of the printing system. Please note that this action will remove all printers and scanners from the Printers & Scanners preference pane.
With the reset complete, unplug the Epson USB cable from the Mac for a minute and then reconnect it. This action should result in the printer being added again to the Mac automatically. If this does happen, then see if you can print again.
If the printer is not added again automatically, open Printers & Scanners and click the plus button to add the Epson. Once this is done, then see if you can print again.

Following Driver Update Epson CX6000 will not print

I 'just' posted this on an answered post and now notice a difference, so I'll repost the corrected info here.
I have a CX6000, Snow Leopard, and following the Apple update - no printing.
I think I've tried most of the suggestions above with no luck. THE ERROR MESSAGE IS "rastertoescpll failed".
But, I have a question - do I have to uninstall the old driver prior to installing the new? (Or, does it take the place of the old one?)
So, would I:
1. Delete the old driver
2. Install the new Epson Driver
3. Apply the updater
4. Repair permissions (again) somewhere along the way?
I have a laptop which (again Snow Leopard) which was not upgraded and it prints fine.
Thank you

I'm having the same problem as you but I'm having trouble understanding exactly what you did. I've deleted the old driver and re-installed the latest driver I found from the epson website, but this doesn't seem to work. Can you offer any help?

HT204135 epson 3880 will not print a3 from cs6

i am on an old intel mac pro with lion 10.7.5 using photoshop cs6 13.05 64 bit
i can not print a3 i get a cropped a4 shape in one corner of the a3 page
the file will print fine in preview but not through photoshop.
print dialogue says eveything should be ok displays in the window as it should print .
but doest come out
epson 3880

Welcome myazel!
myazel wrote:
... I cannot load profiles ofr paper now ... is there an answer for this issue?
I downloaded a dmg file containing Epson ICC profiles . After running the installer, I found the path to the profiles is
HD/Library/ColorSync/Profiles/EPSON Stylus Pro 3880/
HTH

Epson RX595 will not print since Snow Leopard install

I cannot get my trusty Epson to print since installing Snow Leopard and latest printer drivers.
I can scan. Just cannot print.
I have looked at some troubleshooting support articles. Does anyone have a good link, tip?
Thanks in advance for any help with this!

Try deleting the printer, the <hard drive>/Library/Printers/EPSON folder and the /Library/Caches/Epson folder, and then reinstalling the drivers using Software Update. Then add the printer, making sure that you are using the Epson driver, not the Gutenprint driver.

HP Photosmart C3180 on USB Will Not Print After Update to 10.5.7

My HP Photosmart C3180 all-in-one printer (connected via USB) has worked fine up to now. Last night I installed the 10.5.7 update and now all the machine will print is a single line of text with the name of the Adobe postscript file, and then it continues to feed and output blank page after blank page without end.
I tried reinstalling my printer drivers. That did not fix it. It also keeps prompting me for an Adobe PDF file name each time I send a document to print.
I've tried printing PDFs, Word documents, web pages, etc., and I keep getting the same results.
Any suggestions about alternative drivers or are other people experiencing printer problems after the update?

I downloaded the 10.5.7 update on its own and reinstalled it. That seemed to fix the problem now. Don't use the "Check for Updates..." link in Finder.

Epson R2880 - Will not print - paper sizes

I am having major problems with trying to print to a R2880. I have recently purchased it and have had problems with printing to it from the beginning. Sometimes it works but mostly it doesn't.
The Epson driver is 6.2 which is the latest. I am running Leopard. Do not want to upgrade to SL cause what I read shows FCS2 does not run on it.
Keeps on telling me that the "Paper source selected in the printer doesn't macy the paper loaded in the printer" which is of course bollocks.
I have tried the solution offered by a previous post which was to got to the print preview and then Cmd - P and then choose the right paper. Worked fine on an A4 but when I did the same for a 10 x 15 cm no go.
It suddenly started working the other day but when I chose a selection of 10 x 15's (varied portrait / landscape aspects) to print it did not orientate them correctly. The paper was installed in a portrait arrangement yet not one of the photos printed on the page correctly.
What a waste of time this printer and Aperture are.
Can anyone help on this most frustrating problem. I have had this printer for a few months and have only managed to print a handful of photos !
Regards

Hi Colin,
The R2880 is a little finicky when it comes to paper source. A couple of questions:
• What paper are you using? What size? Are you using the back tray or the main tray? I had a ton of problems with the back tray and that very error. I now always use the main tray, but it depends on the paper you use since certain types can only be loaded in the back.
• Are you making sure the preset you choose is for +sheet feeder+ and not +roll paper+?
The Preview solution you read about is probably mine and was brought on by SL. Fortunately 10.6.2 fixed that problem but I've still had the paper source error come up a couple of times - I need to open the print settings for the preset I want to use and save it again (it's as though it needs to be reminded that it should use the sheet feeder, even though that setting is saved right there in the preset).
My first thought was that your problem might have to do with the non-conventional paper size, but I also make custom 16x12 prints on 13x19 paper and don't have problems at all.
I'm guessing it's probably a combination of settings and paper type...

My Epson 1270 will not print w/CS5

When I try to print Photoshop shuts down. I have the newest driver from Epson and their customer support said to check with Adobe.

Have you installed all the Photoshop updates?
Which OS version are you using?
Does the crash report give any details?

Epson R340 will not print higher quality photo - Jobs Stopped!

I have seen posts on this problem before but I've tried the recommendations and haven't had any luck. From IPhoto 5 (version 5.0.4) I can print regular resolution photos but if I switch to the higher resolution photos the printer stops printing. If I restart printing it says "Opening Printer Connection" and then again "Jobs stopped".
It is very frustrating since I have printed the higher resolution photos before with the same software, drivers, etc. but I cannot repeat it every time.
I have tried verifying and repairing disk permissions but it did not work. I have also tried all combinations of Advanced Options - Print Setting along with the Presets.
Help!
Mac Mini 1.42 GHz Power PC G4 Mac OS X (10.3.9) 512 MB DDR SDRAM

I reinstalled the drivers from the original set-up disk (didn't do anything)
I reread the Help topics and noticed that Epson had set the Presets to "Standard"
I noticed that in the ColorSync Utility the default preset was "Standard", so...
I set the "Format for:" to "Stylus Photo R340"
I then changed the "Paper Size" to "4x6 (sheet feeder - borderless)"
- I used to have it as a custom 4x6 size - this may have been the problem
Then I went into the Print menu from iPhoto and checked to see that the
Preset was "Standard"
From there I went into "Advanced Options" -> "Print Settings" and changed the Mode from "Automatic" -> "Speed" to "Quality"
I hit print and out came the higher resolution, higher quality photos.
Thanks for helping - I think you put me on the right path.
Mac Mini 1.42 GHz Power PC G4 Mac OS X (10.3.9) 512 MB DDR SDRAM

Epson R2880 will not print borderless in PE8 or Lightroom

Why won't my Epson R2880 print borderless in PE8 or Lightroom 3 when it will with Epson Easy Print. I am using OSX 10.6.8 and the Epson driver 8.6

Hope these are helpful, sorry if i misunderstood.

Epson RX620 will not print with my MacBook Pro. Error:/ System/Library/ Pri

I can't get my Epson RX620 to print using my MacBook Pro. It prints fine using my G5 and all info was migrated from the G5 to the MacBook Pro. But I get this error message, Error:/ System/Library/ Pri... can anyone help?

skeeter694 wrote:
I can't get my Epson RX620 to print using my MacBook Pro. It prints fine using my G5 and all info was migrated from the G5 to the MacBook Pro. But I get this error message, Error:/ System/Library/ Pri...
Welcome to Apple's discussion groups.
What's the rest of that error message? Posting what you did is similar to posting as an error message the text "I'm having trouble with ..." with nothing following.
I'd try several things until things work:
1) Open the Print & Fax panel of System Preferences. Right-click on a printer entry and choose "Reset printing system".
2) Delete the entry for your printer, then add it back.
3) Check the Epson Web site for a recent driver for your printer. Download it, then first run it in "uninstall" move, then in "install" mode.
I'll be personally interested in what you learn. I have a relative who has an RX620 and 10.6.4, but I'm not sure he's tried to print anything yet.

Since Snow Leopard epson RX680 will not print CD labels and color bad

I have tried everything recommended, all udates and drivers and etc... no luck printing on CDs. Can anyone help me? I cannot afford a new printer.

i have the exact same problem, i even rang and emailed epson, no luck, iv'e tried all the updates, even changed thin ink as i thought low ink could be causing the problem, it just doesn't let you click on print, grrrr have you had any luck??? i have the epson rx700w, but it uses the same print cd software...

Epson Stylus CX7300 will not print after software update

After doing the latest update for my Epson Stylus CX7300 printer it will not print. When i open the printer utility it comes up with a communication error. I can still scan documents but i can't print or even print a test page, check ink levels etc.

Hi Kerry Bonney,
Welcome to the Apple Support Communities!
If you are having issues printing after running a software update I would recommend using the troubleshooting steps in the following article. It sounds like you have already completed some of these steps, but I would recommend reading over and working through the steps provided in this article.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Have a great day,
Joe

Epson R1900 will not print or update

Similar Messages

Maybe you are looking for