Epson r2400 Driver Loses Functionality after Installing Digital Camera Raw

I have four Macs at home and two printers. After installing Digital Camera RAW Compatibility Update 2.0 from software update on my Mac Pro and MacBook Pro, the Epson r2400 printer driver no longer works. I can barely get a print out of Aperture and/or Photoshop, however, Pages will output to the r2400 no problem. When I try to print with the other Mac Pro that has not been updated, I can print without issue. I can print from both machines to my kyocera mita printer within aperture and photoshop.
All of these computers are running 10.5.2. The only difference being the most recent Digital Camera RAW Compatibility Update 2.0 is installed on the two machines that no longer work with my Epson r2400.
I have uninstalled the print drivers and reinstalled. Changed the connection to the computers and tested everything that has worked in the past. I consider myself pretty good at troubleshooting, but this is beyond my grasp.
I need to print right away from all these computers, so does anyone know how to "roll back" an update? I am not running Time Machine, but that may change very, very soon. Please help...

I'm working off a 750 GB hard drive, not so simple to clone even via firewire. I guess I made a serious mistake by trusting the apple update process...I see they have a new update today. I may try that to see if fixes the problem before I buckle to the original system disk installation process. If the install is already burned, it couldn't hurt to throw some gasoline on it, right?

Similar Messages

Can't Install Digital Camera Raw 3.6

I am having problems installing Digital Camera Raw 3.6. During the install, I get the message "Digital Camera Raw Compatibility Update can't be installed on this disk. This update provides support for Aperture 3 and iPhoto 9 only".
I purchased Aperture 3 from the Mac App store. In Aperture 3, Digital Camera Raw 3.4 is installed. Software Update does not recognize Digital Camera Raw needs to updated. Help!

Ernie.......yes, the application is Aperture, Mac's photo-image software. I didn't specify as I thought I was posting in the Aperture Forum. I'm not very familiar with these forums, did I miss a step in clarifying my subject?
Don

Can't install Digital Camera Raw Compatibility Update 2.2

Software Update wants to install Digital Camera Raw Compatibility Update 2.2, but it always fails, saying: "The update “Digital Camera Raw Compatibility Update” can’t be saved. You do not have appropriate access privileges. The Installer package has been moved to the Trash. To try again, open the package from the Finder."
I've tried doing Repair Permissions in Disk Utility, but this has not helped. I'm using Mac OS X 10.5.5, all other recent updates have gone in fine.

I had the same problem. Deleting the contents of the HD/library/Updates worked.
Never the less I noticed that the permission set was different:
Original permission set: admin R&W, admin R only, everyone R only.
I also followed the Alias and found two files with the same permissions.
Re-downloading (via software update) revealed a new permission set:
(Me) R&W, Admin R&W, everyone Read only
In both the alias and the two files downloaded. Note that (Me) denotes your user with administrator access.
I believe that, since the update was downloaded automatically, the permissions were mismatched and instead of adding a system R&W privileges it added a second Admin Read only permission.
Adding an administrator user with read and write permissions should solve the problem (as long as you authenticate as that particular administrator when prompted for intall authorization).
Regards, Jaime.

How do I reboot my MacBook Air? It says software is being installed; digital camera RAW compatibility and safari

I am trying to get rid of this "Installation Alert" window. I tried to force quit all and reboot, but it says "Your computer can't be restarted now, because software is being installed." Below that it says "Digital Camera RAW Compatibility Update and Safari are being installed. Interrupting the install Amy damage your computer. You can restart when the install is complete". It has a progress bar below showing it being 80% complete, but it just hangs there. Now safari is going crazy.

Then try holding down the Power button for 5-10 seconds until your computer shuts down. Wait one minute then:
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

Installed digital camera raw update 3.8, but Aperture doesn't recognize Oly E-P3 raw files

I was excited to see that the digital camera raw compatibility update 3.8 purported to provide support for Olympus E-P3 raw files. I installed it from Software Update, and Aperture 3.1.3 (OSX 10.6.8) still showed the raw files as "unsupported". I restarted my Mac, got the same result. I downloaded and installed the standalone update, and again got the same result. Has anyone else had success with the update?

I found a solution. My E–P3 raw files still showed up as “unsupported” after reinstalling the update from the standalone updater. I discovered that selecting one of the “unsupported” raw files and having Aperture reprocess it (even though it had never been processed at all) made the file recognizable by Aperture and allowed me to make adjustments to it. I then reprocessed all of my E–P3 raw files and the only problem I have noted is that the vertical files were not auto rotated.
In reprocessing the raw files, I selected "only photos without adjustments" and "reprocess existing images". I hope this helps anyone who experienced this problem.

Problems since installing Digital Camera RAW Compatibility Update version 6.01

I recently installed the Digital Camera RAW Compatibility Update version 6.01, however since updating my MacBook Pro (Retina, 15", Late 2013) isn't working right. My background is black (and I can't change it), I don't see the dock and I can't minimize any of my windows. HELP!!

Reinstall OS X.
Message was edited by: EZ Jim
Mac OSX 10.10.1

After installing cs4, camera raw no longer available in cs3

New computer, mac pro 2.8, 10.6.6. On previous and other macs I work on, I'm able to open jpgs and tifs in camera raw with the cs3 or cs4 bridge. Have current versions of camera raw for each app, but cs3 bridge no longer has options for opening jpgs, tifs, or dng files in camera raw. I still have prefs for camera raw in cs3 bridge. Do I need to build new cache for cs3 alone? Have newest DNG converter, would this have screwed up my cs 3? Any ideas?

Actually fixed major problem by purging cache, except dng files that I could open before in cs3, now only recognizable in cs4. Things could be worse, I suppose.

I just installed Digital Camera Raw Compatibility 3.9

before that it was 3.5. Do I need the ones between those 2 or does the latest update include everything Thanks

Thanks for the reply.
I was aware that it was for reading different camera RAW files which is my problem. The camera I have now was never supported. One of the cameras I was looking at getting wasn't supported until earlier this year. I keep hoping my current camera will get supported but at this point I don't think it ever will

Is Digital Camera RAW Compatibility Update 4.06 Affecting My Drivers?

After installing Digital Camera RAW Compatibility Update 4.06 and booted in windows 7, I can hear the windows startup sound but there is no display. After rebooting using the last good know config, I was able to login into windows but my ethernet and bluetooth are not working. In the device manager,
Ethernet and bluetooth device status: This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

Maybe. I don't know. I was able to use my ethernet before the update. After the update, I am facing these driver issues. My ethernet adapter cannot be found in the list of network connections.

Aperture 3.4.4, Digital camera raw 4.0.5 cannot be installed

On my late 2007 Imac I run OSX 10.8.3 and Aperture 3.4.4. While installing Digital Camera Raw 4.05 I get the message Aperture version 3.4 or later, or iPhoto version 9.4 or later, is required to install this update after which the installation aborts.
I still had iPhoto 7.1.5 on my machine which I haven't used since 2008 which I decided to delete, but that did not help.
IMO the install programm should just work as it says you need either the correct Aperture OR iPhoto version, not both .
But anyway, what can I do to enable the update to work without doing a clean install of ML or buying a product I never use? Is there still some kind of iPhoto residu?
BTW, the last version of DCR I tried to install was 4.0.2. This had the same issue, but I let go of that one. I don't know what my current version is.
Kind regards,
Martin

I have all my Photo applications including Aperture in a separate map
The subfolder explains it. That is a problem in Lion and Mt. Lion. These operating systems rely on the applications being installed directly in the Applications folder.
However, you could group your applications by creating folders in the Launchpad. Simply dragging the applications in the Lauchpad on top of each other will create subfolders there and you can see them all grouped there and launch them after double clicking the folder. That is Lion's and Mt. Lion's way to launch applications from folders.
These screenshots show my folders for Photography apps and Music applications. Double clicking reveals the folder contents for launching.

"Pink Hue" after updating to Digital Camera RAW 4.08

Hello,
Anyone else is getting "Pink Hue" in Preview (Quick Look and Preview app) for RAW images on OSX 10.8.4 after updating to Digital Camera RAW 4.08 ?
The Thumbnails of the pictures are showing up fine, and I'm not facing this issue on my other Mac running Mac OSX 10.7.5 (MacBook Mid 2010).
Thank you..

UPDATE: I have contacted Apple Care, they asked me to delete RawCamera.bundle and RawCameraSupport.bundle from /System/Library/CoreServices then install Digital Camera Raw 4.07 from http://support.apple.com/kb/DL1666?viewlocale=en_US&locale=en_US
RAW pictures are showing up normally now, it appears to be a bug. They sent a request of this to the engineering team.

Digital Camera RAW Compatibility Update 3.12 and later can not be installed on OSX 10.6.8.

Hi
I bought a new Canon EOS 5D mark 3 and noticed that my MacBook Pro with OSX 10.6.8 can not handle the new raw files.
Searching google shown that I need Digital Camera RAW Compatibility Update 3.12 or later.
So I tried with 3.12, 3.13 and 3.14, but all failed during installation with error: "Dieses Update unterstützt nur Aperture 3 und iPhoto 9."
Hmmm
Checking iPhoto ...
About IPHOT shows "Iphoto '09 version 8.1.2 (424)"
So I've updated Iphoto with version 9.2.1 (which I found matching my OSX after stepping down from highest version down ..... Apple is here not really supporting users here .......)
Unfortunately this is only an update.
So I need to install first a newer Iphoto version.
Iphoto 11 I can buy in the app store, but I can not install it on OS/X 10.6.8 .....
Lost!
How do I get my raw files of 5Dm3 visible in OSX 10.6.8 ???????
Any help welcome
Thx
Wolfgang

I maintain up to date my system, yet I have from time to time when I take RAW picture issues in iPhoto not reading them. Today, looking for another issue I came across this update and I was hopping it would resolve my issues with the RAW photos from my Pentax K-30.
The error:
Installer quit unexpectedly.
Click Reopen to open the app again. Click Report to see more detail information and send to Apple.
Backtrace not available
Unknown thread crashed with X86 Thread State (32-bit):
eax: 0x00000055 ebx: 0x00000000 ecx: 0x00000000 edx: 0x00000000
edi: 0x00000000 esi: 0x00000000 ebp: 0x00000000 esp: 0x00000000
ss: 0x0000001f efl: 0x00010203 eip: 0x8fe01030 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000000
cr2: 0xfffffffc
Binary images description not available...
This laptop cannot be upgraded further without hindering its performance. Hence, I need to keep the version of iPhoto that I currently have.
Thank you for your response.

How can "Digital Camera RAW Compatibility" 4.06 be removed so that 4.05 can be installed first?

App Store currently shows "Digital Camera RAW Compatibility" 4.05 as an update. When attempting to update the following dialog box appears stating "An error has occured - The operation couldn't be completed. (NSURLErrorDomain error -1012.)(-1012)
After searching found that the pkg files can be installed, However when trying to install 4.05 from a pkg file get the following dialog.
Any ideas?
Is it possible to erase 4.06, then install both 4.05 & 4.06?
many thanks
John

after trying to install 4.05 via a pkg get a dialog stating "Alert - A newer version of Digital Camera RAW support is already installe on your system"... Hence the question about removing 4.06.
Is there a version of the Digital Camera RAW that contains all updates, like a combo?

Will not start even in safe boot after installing latest camera update

MacBook Pro will not start even in safe boot after installing latest camera update.
I started my machine and did a software update. Only the camera update needed. So installed and when required I pressed restart. It restarted and did install. Then restarted again. I expected to get to the login screen and it turned itself off. Tried three more times. Each time shutting off. I unplugged everything, and pressed start waiting for log in window. No it shutdown before the log in window. I then tried safe mode and that did not work either on three more occasions.

I have managed to resolve some issues. I can now restart the machine via a CD boot. If I do cmd C into something like tech tool pro, then restart from that disks menu it restarts every time.
If I try a safe start it shuts down. If I try a normal start it shuts down. I have managed to repair permissions and that cleared up some start up permissions but with no improvement to the boot problem. The only way to load is via the cmd-C boot option. Any other ideas?

Apple Digital Camera RAW Support 2.2. update

After todays Apple Security Update 2008-007 the Apple Digital Camera RAW Support 2.2. update finally works correctly and the data can be aquired via card reader.
Message was edited by: jdonath

Lucky you jdonath....
I have still have the problem that have been mentioned in a number of posts in the forum, and what I guess you are refering to. And I have tried the advices I have found in those posts. I must admit that I might not have found them all.
The CF card on my Nikon D2Xs shows in finder, .nef files are there, but Aperture 2.1.1 don´t recognize my files only the card itself.
I use a card reader-not transferring files directly from the camera. I have installed the latest security update and camera raw 2.2. I have tried to go back to version 2.1 of the raw converter with no luck. I have repaired permissions, both with Onyx and with the disk tool in OSX.
Aperture opens when I put the CF card in the reader and it shows in the import option/drives window in Aperture, but the files are somewhere in outer space or at least hidden and unavailable for import.
So for now my solution is to dump the files to a picture dump folder on my hard-drive and import them from there to one of the libraries I use.
I have different libraries for work and private files in case someone wondered
It does not make any difference which library I use the problem is persistent. This feels like unnecessary work and not a very satisfying sollution in my workflow.
Yeah, yeah i use both belt and suspenders so the files are kept safe on an external drive as well. Manually copied of course... and btw i use a combo of referenced and managed files, but that should not make any difference. I have tried to alter that in the import options, with no apparent result of course.
Can anyone give me a hint what could (still) be wrong or do I have to be moderately patient and wait till next sunrise (it is late autumn and dark in Norway this time of year) , when Apple sends out version 2.3 and make a prayer that they remember that some photographers are still back in the stone age when comes to cameraequipment... ( I wish someone gave me a D3)
And just to make the confusion complete... It used to work BEFORE the security update last night...
Cheers and my 2 cents
Ø

Epson r2400 Driver Loses Functionality after Installing Digital Camera Raw

Similar Messages

Maybe you are looking for