Epson R2400 not printing correctly!

Hi, I hope somebody can advise me, I have problems since installing leopard and can't solve them:
1. When I try to print a photograph from Photoshop CS3 using Leopard, the picture is almost colorless( if I print from CS3 using Tiger the colors are correct), The software options are also cut down and I cant access area's to set the print up for printing!
2 If I try to use my scanner as a photocopier using Vuescan the preview and scan appear to work as normal but when I click to print the article scanned the R2400 just pumps out a blank page (if I do the same using my older R200 the article prints as it should.
Has anyone any ideas as to whats happening? particularly regarding problem 1 above as thats more important than the vuescan issue?
Thanks in advance I value your help very much.
Regards Denisimo

I have been in contact with Epson and solved this problem. See my post on Mac Pro forum " Problem with Epson Stylus Photo R2400 Printer on Leopard OSX"
Thanks for your advice
Regards denisimo

Similar Messages

Indesign CS3 & Epson r2400 not printing tabloid paper

Indesign CS3 & Epson r2400 not printing tabloid paper. MAC OS 10.5.6. Have tried all configurations of page set up 11 x17 and 8.5 x 11 spreads, custom page sizes and default paper set up. The print comes out cut off. Epson says it's an Indd problem. Very inconvenient. Got any ideas?

I'm having the same problem with IDCS3 5.0.4 and an Epson Stylus PRO 3800 on Mac OS X 10.5.6 with version 6.11 of the Epson driver. I have a 17x17 document in InDesign that I am trying to print on 17x22 paper. The paper spools a little less than half-way down and the print begins, but it prints about 1/4 of the image--it is as if it cropped at 8.5x11 at the top right corner of the image.
I have had to resort to saving the file as a high-res jpeg and printing from Preview as a workaround. Unreal.

10.9.2 Epson R2400 not printing anymore

Hello,
Just updated to 10.9.2 and my Epson Stylus Photo R2400 is not printing anymore.
It is connected via USB and worked flawlessly all the time before.
I get this message
What is going on here?
Thanks for Feedback
Bernd

Ok, what I did is deleting the Printer from the System and installing it again.
Works again

Transaction Register Report not printing Correctly

Hi,
In Accounts Receivables Transaction Register Report is not printing correctly..
Once I issue print job for Transaction Register Report...Blank page is coming..
what is the cause..please suggest

Does the print work properly with other reports? If so, I suggest you run the report in debug mode. Please check (Note: 226013.1 - How to run AR RXi reports in debug mode) for more details.
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=226013.1

Upgraded to CS5 Illustrator form CS3 Illustrator. Colors are not printing correctly in CS5

I have just recently purchased CS5 Premium Suite. I am working with Illustrator. When I print my CS3 Illustrator files in CS5 the colors are not printing correctly. Is there a way to fix this problem

I've been doing more troubleshooting since I wrote this post. I've now tried printing from a non-Adobe app and I'm getting the same margin error. So it is definitely a Xerox issue and I have a tech coming out on Monday.
The reason I originally figured it must be an CS5 issue is because just two weeks ago when I was using CS2, our landscape-oriented programs were printing with .25" margins as they should. Then last week after upgrading to CS5, the inside page (2nd page) was noticeably out of whack and shifted to the right (not left). But when I started trying to troubleshoot this week, everything started shifting to the left.
The only thing different between those two weeks was the fact I updated to CS5.
But obviously, my printer as decided to go to crap in more ways than one all in a two week period. Hopefully the tech can sort it out next Monday.
Thanks!
Christi

PDF will not print correctly from any app

I seem to keep on getting the same error everywhere I print on SL (from safari/firefox/preview etc etc)
It will usually print any lines or logos but miss all text?? I did have the dreaded adobe reader installed but have since removed it?
I am in urgent need of printing out some manuals for a class so in real trouble, help!

Where do these PDFs that do not print correctly come from? Are they downloaded from the internet or from email? Or do you create them yourself on your computer? If so, in which program?
Do some PDF files print correctly, but not others? Did you remove the dreaded Acrobat Reader before this problem developed or after? Did this problem develop only after you ungraded to a certain release of Snow Leopard or has it never worked in SL?
PDF is wonderful technology, but every so often there can be issues.
Arch

Printing on HP P1505 not printing correctly yet Explorer 9 works on same web site with same printer.

I have download the latest software for Firefox and the HP P1505 printer, but the pictures within the web site print correctly. The text information is not printing correctly. Lots of spaces and the font is a mess. You can read the text information, but it is all over the page. Firefox did print with no issues before 4.0b12. It always worked with the version 3 of course. I really do not want to go back to 3 as 4 is better except for this issue.

This is a known issue in Firefox 4 beta 12. You could wait til' the RC comes out, or you could grab one of the latest nightly builds availible here that fix this problem: ftp://ftp.mozilla.org/pub/firefox/nightly/latest-mozilla-central/
Just a note though, nightly versions of firefox are generally less stable than betas or releases. I am waiting for the Release Candidate to come out myself. (Should be early next week)

HP Photosmart premium not printing correct colors or contrast on photo paper.

My HP Photosmart Premium does not print correct colors or contrast level on photographs using photo paper. This happens with using most any application and setting the paper type to one of the photo papers... By using MS PhotoAlbum and selecting the photo tray then forcing "regular paper", I can get a somewhat decent print (this trick only works with MS PhotoAlbum). When I setup to any of the "photo paper" types, I do not get correct colors or contrast levels (even if the print preview looks good).
I have the same issue with 8.5 x 11 inch photopaper. Unless I select "regular paper" as the paper type, I get incorrect color and contrast (even if the preview looks good). The ICC "Color Profiles" look to be OK (at least the titles are correct).
Anyone have any ideas?

Try the troubleshooting steps in this page. My bet would be the Photo cartridge (the black with the bow tie symbol) is out of ink. This is only used when photo paper is selected, for plain paper printing the regular black cartridge is used.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Adobe Acrobat Pro X 10.1.7 (Mac) does not print correctly.

I have a Mac Pro (Model 1.1) with Adobe Acrobat X 10.1.7. When an item is scanned, it appears correctly on the screen, but it does not print correctly. I am sending along screenshots of what a scanned item looks like on the screen and then what prints.
Message was edited by: DFSons Added photos

Thanks Michael, have tried that, no luck. I will wait a couple of days to see if any other solutions come up (or if anyone else is suddenly having the same issue) before reinstalling Acrobat.
[OK just tried sending a PDF attachment directly from another program (MYOB) through to Mac Mail and had the same problem so it is not an Acrobat issue afterall, it is a Mac Mail or Mac OS X issue. Will post this on the Apple site.]
I have resolved the MYOB issue, it was working just painfully slow. So I still have the original Acrobat Pro PDF to Mac Mail issue if anyone knows of any solutions please?
Message was edited by: jmgd

Cd jewel inserts not printing correctly-come out with only song name not artist and not in landscape form-hl

cd jewel inserts not printing correctly-only shows song title not artist and printing in portrait form where landscape form is required-pls help!

iTunes CD printing has been broken for several releases now. Some people have had success by directing the iTunes print output to a PDF file, and then printing the PDF.

Foreign characters are not printed correctly in Analyzer 6.5.0 and java 1.3.0_02

Hi,I am using Essbase at 6.5.3 level and Analyzer Enterprice edition at 6.5.0 level. The java plug-in is at level 1.3.0_02.Foreign characters are corectly dispalyed in Analyzer java web client, but when I try to print the report the foreign characters are not printed correctly.I have changed the contents of the font.properties file all code pages from 1252 to 1250. The characters are still not printed correctly.How to "force" the Analyzer print the foreign characters to print?Thanks,Grofaty

* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Added text & signatures do not print correctly

I am using Acrobat Reader v10.4.4 on my iPad Mini with IOS 6.1.2 and am having issues printing. I can open any PDF and have it displayed correctly. I can add text and signatures and the document is saved correctly because it can be opened after the changes are made and they are still there. When I try to print the document where I have added text and signatures to, the document does not print correctly. All of the text and the signature are shrunk to a very small size and appear in the lower left hand of the page.
I depend on my apps to work they way they should and having this issue makes my work very hard. I have to be very creative and perform unnecessary steps to get my PDF's to print the way they should. Does anyone have some insight in to this bug?

Hi,
Thanks for reporting this issue. We would like to investigate this issue at our end and if you could share one such pdf file in which you are facing the issue at [email protected], that would greatly help us.
Thanks,
Ankit

Red not printing correctly

Hi,
The printer is aHP Officejet 6700 Premium.
The red color is not printing correctly it is printing as a maroon colour. All other colours seem okay. No error messages are appearing.
I have run the clean printhead pgm and no change.
Any suggestions?
Thanks

Couple of things come to mind.
First, obviously, make sure it is a Geniune HP cartridge. I have seen other ink that is a little off in color.
Second, make sure it has nothing to do with the paper you are using. Print a test page (if you haven't already) on normal white paper, not photo paper or something else.
Third, if you have a features tab in the printer preferences, make sure in the color management field, that it is not set on some custom color profile or application controlled setting.
Hope that helps.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

CR2008 SP5 Labels not printing correctly

Hi,
I've got an issue were labels are not printing correctly to a Zebra printer. I'm using Crystal Reports 2008 SP5. The problem is the width is 10cm and the length is 7.5cm but Crystal is automatically changing this to landscape orientation which doesn't print correctly then. From reading older threads, a lot of people have had similar issue but according to this thread - CR 2008 V 12.3.0.601 Labels will not print correctly the issue should be resolved in SP5 but it's still not printing out in the correct orientation despite the print preview looking perfect.
I've tried checking the No Printer option and the Dissociate Formatting Page Size and Printer Paper Size option and pretty much every other option I've seen mentioned but I still cannot get the label to print in the correct orientation. Has anyone succesfully got this working?
Thanks

Hi Gary
What is the version reported when in the designer you go to the Help menu and then About... ?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

11x17 tabloid does not print correctly

I am using an HP Photosmart printer model 8550, my previous printer was an HP Photosmart 8750. That printer died and the 8550 is the newer model of the same printer. When trying to print an 11X17 document in tabloid, the page does not print correctly nor does it show in preview mode correctly. The page shifts to the upper left corner so that the left side and top of the document do not print. If you scale down the size you can get it to print the whole documentm but you cannot get it to use the whole 11x17 page. Anyone else with this problem and a solution? Thanks!

[email protected] wrote:
I am having a similar problem. I have windows XL,
and a hp Deskjet 9800. I have been using PM 6.5 ever since it came out. I publish a newsletter using tabloid fold in half, under booklet. So it is a really a 4 page document. It has always done fine until this week. It prints the copy in reduced format that would fit on a 8 1\2 x 11. I have tried every setting possible, with no success. Today I downloaded the trial 7.0 version, it does the same thing. I went back and printed old versions that a 3 & 4 years old they won't print right now, either.
It's old software and new operating system/printer drivers. You are unlikely to get any help from Adobe or HP but you can try.
Create a PDF and print that as it's unlikely the DeskJet has PS mode.
BTW, booklet printing is far easier with ISO paper sizes.
Move on up to InDesign while you can still get a big discount with PM Licence number.

Epson R2400 not printing correctly!

Similar Messages

Maybe you are looking for