Epson R2880 profiles not showing. 10.7.5

I don't want to double post. So if any one here knows why I can't see Epson R2880 Printer profiles in Illustrator CS3 13.0.2 dialog. Lion 10.7.5, please go to this link in Adobe Color Management forum to advise:
http://forums.adobe.com/message/4940840#4940840
I much appreciate it,
CB
print dialog:

As has been suggested in your other thread, most printer software includes a 'clean nozzles' command, but I would add that you should all replace all your printer ink cartridges since you said that they haven't been used for a while, as they will probably keep clogging.

Similar Messages

Printer/Paper profiles not showing up in Lightroom 1.3.1

I installed 2 new paper profiles from Red River over the weekend in XP Pro. Only 1 of them actually show up in lightroom to choose from. The one that can be selected works fine but I can't view the other one. I've tried uninstalled and reinstalling it. I can, however, see and select this profile in Photoshop CS and other applications. Lightroom seems to be the only one with problems. Does this point back to a red river problem or is lightroom picky about something I don't know?

I talked to LR today -- no help, told me to call Epson.
Epson advised me to go tp PRINT mode > RT menu > Print Job > Managed by Printer click this and choose other. Drop down menu appears and you can choose your profile. then back to print setting and the profile should show up there.
My profile did not show there -- I was advised that because I have Matte Black ink cartridge in the print that the Premium Luster will not show because PL will only print with Photo Black.
So I need to change the ink type and hopefully I will be able to print on the Prem Luster.
ope this helps you.

Profiles not showing up in LR

All of a sudden (as of my upgrade to LR 2.5 to the best of my knowledge) I cannot select the installed Epson paper profiles for my 3800 that I have always been able to select in LR's Print module. Specifically, Photo Luster, and Enhanced Matte. They show up in Photoshop, but not in LR. I've attached a screen shot of the dialog I get when selecting "Other" in "Profile" the Color Management tab of the Print Module.
I've reinstalled my Print driver and Lightroom. I'm running Mac OS 10.5.7 on an Intel. Have never had ANY prior issues. All of a sudden it's just a very limited list of selections. The only profiles that appear are the individually installed profiles that were COPIED into the Color Sync folder in my User Library.
Please help. I've tried everything I can think of. Check out the screen shot of the profile selection dialog.
Thanks in advance.
ed

Okay, I'm answering my own reply. I discovered the problem. It was the fact that LR was running in 64-bit mode. Apparently Epson's profiles are not set up for that...
So, if anyone has this issue, that is the answer. 64-bit mode was either selected as a default after upgrading to v2.5, or I perhaps selected it after reading Seth Resnicks' Lightroom book where he recommends 64bit for speed.
ed

Lens profiles not showing up in cs6

I have cs6... the lens profiles are not showing up in either camera raw or photoshop. They are grayed out in the lens correction filter tab. any help would be appreciated.

Okay, I'm answering my own reply. I discovered the problem. It was the fact that LR was running in 64-bit mode. Apparently Epson's profiles are not set up for that...
So, if anyone has this issue, that is the answer. 64-bit mode was either selected as a default after upgrading to v2.5, or I perhaps selected it after reading Seth Resnicks' Lightroom book where he recommends 64bit for speed.
ed

Paper profiles not showing in CS5 on leopard

I have an intel core Imac and have just downloaded CS5. When I try to print under 64 bits, my epson paper profiles are not listed. They do show up when I change to 32 bits. I have downloaded the latest drivers for my epson 3800. Any suggestions?

When I try to print under 64 bits, my epson paper profiles are not listed. They do show up when I change to 32 bits. I have downloaded the latest drivers for my epson 3800. Any suggestions?
What OS version?
Which list, in PS printer dialog or in the driver? If in the driver do you have lines through your choices?

ECP CI Start and Instance Profile not showing in RZ10

Hi,
I am not able to access or view our ECP Central Instance Start and
Instnace profile for ECP CI Instance in RZ10 , I do not see the start
and instance profile for ECP CI Instance. However, I do see start and
instance profiles for APP1 and APP2 instance, but just not CI instance.
So, when I try to re-import the profiles I get the below error message.
I wanted to check if it is access related, so, I logged on the the ECP
CI Server physicall and had tried to accessed the ECP
CI Server and try to access the below path from start --> run -->
SAPGRPPRD\sapmnt\ECP\SYS\profile\ECP_DVEBMGS02_ECC-Prod-CIS and
SAPGRPPRD\sapmnt\ECP\SYS\profile\START_DVEBMGS02_ECC-Prod-CIS and it
works. But the profiles are not being read
From ECP CI RZ10. Can you please advise why this is not showing.
Error Message when i try to import the profiles:
Log for the import of profiles
Instance profile
SAPGRPPRD\sapmnt\ECP\SYS\profile\ECP_DVEBMGS02_ECC-
Prod-CI Could not be read. The import is therefore not possible.
Start profile
SAPGRPPRD\sapmnt\ECP\SYS\profile\START_DVEBMGS02_ECC-
Prod- Could not be read. The import is therefore not possible.
Instance profile
SAPGRPPRD\sapmnt\ECP\SYS\profile\ECP_DVEBMGS02_ECC-
Prod-CI Could not be read by file; Therefore could not be checked.
(Server = ECC-Prod-CIS_ECP_02 )
Please advise?

Hi,
I logged on the the ECP
CI Server physicall and had tried to accessed the ECP
CI Server
as per above statment you have login to CI and try to call CI proifle file manually. then can you tell us why this both the host name are different.
SAPGRPPRD
ECC-Prod-CIS
Thanks
Anil

Icc profile not showing up in Photoshop

hi- I downloaded an ICC profile from an online printer that I want to use in Photoshop CS3 so my images appear properly for their output. I placed it in Library/Adobe /Color/Profiles and restarted Photoshop but it does not show. What am I doing wrong?

Ramon look, if it says the downloaded ICC profile is shortrunposters.icc and you place it in the folder listed as such and it appears like that when you look at it in the folder and then when you go to the actual profile list (which happens to be over 100 profiles) and you don't see shortrunposters.icc where the heck are you supposed to look and what are you supposed to look for?
It turns out it is Xentilcle version3.icc now how would I or anyone else know that? The creator of the profile originally said "you need to go to an Adobe site to find out the problem because it isn't us", well excuse me I think it was their lack of identification of how the profile shows up.

Printer Profiles not showing in Print Dialog

I cannot seem to see the custom Printer Profiles I have for certain papersin the Print Dialog.
I have added the Print Profiles to Library > Application Support > Adobe > Color > Profiles (and also in Recommended)
But in the Print Dialog under Colour Management > Photoshop Handles Colour > Print Profile - they are not showing. I have done things like restarting Photoshop and converting the image to CMYK from RGB.
I can see the profiles in the Proofing menu and am able to select them.
Any ideas as without using the profiles my colour management is completely off kilter.
Also, can I confirm that I am putting the printer profiles in the correct folder?

Thanks for your response JJMack. I've just found out the problem. It seems that by putting the profiles in the > Recommended folder as well as in the > Profiles folder this seems to have disabled the profiles from displaying in the print dialog.
I'm not sure why but they are displaying fine now.
I'm new to this forum and I wonder if you know if there is a right place or method for sharing this information as I have spent the best part of two hours this afternoon wrestling with this?

Lens Profile Not Showing Up in Lightroom 5.7

Despite the profile for a particular lens appearing in (what I presume to be) the correct places on my hard drive (see paths below), the lens profile does not appear in the drop-down within LR panel for Lens Corrections / Lens Profile. Other new Sony lenses (FE series) do show up but not ALL of them that are in either location (paths below). Weird. What am I missing?
The profile does show up in ACR 8.8. Similarly, Photoshop CC 2014.2.2 populates the profile automatically when I use Filter>Lens Correction but it just won't appear in Lightroom.
Background: CC subscriber, Lightroom 5.7.1, Win 8.1, 64-bit; I have restarted my computer and LR several times.
Profile that is not appearing: SONY (Sony FE 24-240mm F3.5-6.3 OSS) - RAW.lcp
I see it here:
C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.7.1\Resources\LensProfiles\1.0\Sony
and here:
C:\ProgramData\Adobe\CameraRaw\LensProfiles\1.0\Sony
The camera (Sony a7ii) also appears in the related "Camera Profile" locations and it does show up in the "Make" drop-down in LR.
Thanks for any help,
Bill

Thank you.
Worked perfectly.
Bill

Camera Calibration profiles not showing

On Vista Business SP1, only ACR 4.4 and ACR 4.2 show in the Camera Calibration tab, in both ACR 5.3 and Lightroom 2.3.
Both
C:\ProgramData\Adobe\CameraRaw\CameraProfiles\Camera
and
C:\ProgramData\Adobe\CameraRaw\CameraProfiles\Adobe Standard
are present, with entries for my Canon 40D. The profiles were showing in earlier (beta) versions of ACR and Lightroom, and, I think, in the latest version, but now are not showing.
Thanks for any help.
Dan Dill

Somehow my install must have gotten munged.
I just reinstalled PS (and so Bridge and ACR) from the CS4 distribution, applied the related updates, and now the camera profile show properly in ACR 5.3 and LR 2.3.
I should say, the reinstall and update process went without a hitch, for which I am grateful.

Adobe RAW Profiles not showing up

I tried to install the new Beta camera profiles, but they wouldn't show up. I deleted all the folders in the profiles folder, and now the only profile that shows up is "Matrix". I've tried to re-install the profiles, but I can't seem to get them to work.
OS X 10.4 and CS4.

Sam,
First of all, please post in the right forum:
Adobe Bridge Macintosh forum [CLICK HERE]
Adobe Camera Raw Forum [CLICK HERE]
When you post
there, please specify
where
you are expecting the profiles to shows up.
They will show in the drop-down menu of the Camera Raw Calibration Tag, and you will only be shown those for the specific camera model that generated the specific raw file you are opening at any one time.
Also, there are many camera models for which there are no additional profiles.
You also have to have Adobe Camera Raw 5.2 or later. The profiles are out of beta now.
DO NOT
install the beta profiles.
Please do not reply to this thread here. It belongs in the Adobe Camera Raw forum.

Custom color profiles not showing as available in InDesign CC

This is a college graphic design lab environment with iMacs running 10.9.4 and the CC versions of Adobe programs
We have a variety of custom color profiles for our specific printers and media. They're located in a special folder and an alias of that folder is located in /Library/Colorsync/profiles. The profiles in that folder do not show up as available for selection in InDesign CC. They did before the upgrade to the CC version. They do show up in Photoshop CC, Lightroom 5 and Illustrator CC. Is this a known InDesign flaw? Any ideas for a fix... preferably one that doesn't involve moving the profiles?
Thanks
Bob Smith

I had the same issue when playing with my Xerox Phaser 6110 profiled with colormunki. All software except Aperture (3.0.3) recognized the profile (Color Sync, Print dialog, Preview soft-proffing, even LR 3b2). I too tried all possible locations and none worked.
Then I opened the profile in ColorSync, and edited (Profiles -> Xerox... -> Open ->'desc' tag) Ascii and unicode descriptions to read aaa.icc and did a Save As aaa.icc and there it was, available in Aperture, too.
To my great disappointment the soft-proof feature in Aperture seems to be broken for some monitor/printer profile combinations, and is compatibly broken for printing from Aperture. What happens is the resulting image is way too degraded, even beyond the (admittedly crappy) photo printing capabilities of this printer.
IOW printing the same JPG via Preview and/or soft-proofing with the printer's profile yields way more consistent results. Totally unacceptable for a €200 piece of software.

ICM paper profile not showing up when I go to the print modual and select icm check the box show all

The icm profile that I installed shows up in the printer profile. I select it then enter the print button at the bottem select my printer open the propertied and when I select icm in the mode window advanced check the box show all profiles, The only profiles that show are the one that came with the printer not the one that I installed and did show back in the printer profile.
What am I doing wrong?

To see all profiles in Lr you have to click on the two small triangles besides the profile selected in the Print Job panel.
See Screen shot:
Then a list of profiles will appear. If you don't see the profile you are looking for in this list, click on <Other> at the bottom of the list. This will take you to the folder where al profiles are installed, and if your profile is in this folder you should see it there.
If you still don't see it then it's a CMYK profile. CMYK profiles show up in Photoshop but not in Lr.
BTW: If you want Lr to manage colors you have to select a profile where it says <Profile> in the Print Job panel and not by clicking on <Print>.

CVI Execution Profiler not showing (need registry cleanup method)

I have installed CVI 2010SP1 / CVI 2012SP1 and Execution Profiler Toolkit and even though I call the function CVIProfSetCurrentThreadProfiling(1)/set profiling in build options, at the end of the program run, the Profiler does not show up. I tried to uninstall and reinstall all CVI+Runtime (except device drivers which are mandatory to be kept the same), but this did not solve it. Please tell me which registry setting or registry cleanup tool I have to use. Thank you.
Solved!
Go to Solution.

Hello razvan.ioachim,
I think I might have more suggestions for you. Did you try to open the profiler from Start > Programs > ... etc? Did you try to redirect the profiler output to a file?
If none of these suggestions work, your machine may be corrupted. The issue might not lie in the registry, but in a system dll or other component. We might be able to suggest a few registry keys that might hold invalid data, but that is going to take some investigation and might not yield the expected results.
In the end, you might have to format your drive and reinstall Windows...
Best regards,
=Nelu F. || National Instruments.

LR2 Camera Profiles not showing under calibration

I am using the production release LR2 on a PC running XP. I installed the camera profiles and presets. The camera profiles are located in the following directory:
C:\Documents and Settings\All Users\ApplicationData\Adobe\CameraRaw\CameraProfiles\Camera Beta 1\
I can see the presets when in the Develop panels but the camera profiles are not showing up in the Camera Calibration panel. "Profile:" is blank and to the right of that is "Embedded" - none of the profiles show up consequently there is no change when selecting a preset.
I had closed LR2 before installing the profiles and have read all of the FAQ's and anything else I can find on the subject but nothing addresses this issue.
Does anyone have a thought as to what may be causing this issue?
Thanks

>Does anyone have a thought as to what may be causing this issue?
The profiles will only work on RAW images. The fact that you see embedded means you are looking at a tiff, jpeg, or psd.

Epson R2880 profiles not showing. 10.7.5

Similar Messages

Maybe you are looking for