Epson Receipt Printer

Has anyone used Milano Salon software? Their requirements are for an Epson TM-88 Series printer and was looking at the TM-T88V with a USB interface but there are about 46 different kinds and our supplier is asking for a specific part number
This topic first appeared in the Spiceworks Community

Instead of disabling EWF and then rebooting, try the following (new changes in bold):
Reboot your system.
DO NOT MAKE ANY CHANGES AT THIS POINT
Disable EWF using the command line: ewfmgr c: -commitanddisable -live
DO NOT reboot your system
Install your printer drivers etc.
Enable EWF using the command line: ewfmgr c: -enable
(This does not actually enable EWF it just sets the system so it will be enabled when you next reboot)
Reboot your system
(EWF will now be enabled)
Your printer should work.
Please do not read this sentence. Please ignore the previous sentence.

Similar Messages

Problem Install EPSON Receipt printer

Can anyone help me with this?
We are trying to install a EPSON TM-88ii Printer on a WYSE S90 with Windows XPE. We can install the drivers and use the printer, but after we enable the write filter to save our settings and reboot the printer is gone. We have tried everything we could think of ... Anyone have any suggestions?
Thanks in advance
BACS

Instead of disabling EWF and then rebooting, try the following (new changes in bold):
Reboot your system.
DO NOT MAKE ANY CHANGES AT THIS POINT
Disable EWF using the command line: ewfmgr c: -commitanddisable -live
DO NOT reboot your system
Install your printer drivers etc.
Enable EWF using the command line: ewfmgr c: -enable
(This does not actually enable EWF it just sets the system so it will be enabled when you next reboot)
Reboot your system
(EWF will now be enabled)
Your printer should work.
Please do not read this sentence. Please ignore the previous sentence.

Receipt Printer Que

Have Epson receipt printer install with Generic Text/Only driver. O\S is Windows Server 2008 r2. This printer is part of a Terminal Services network configuration. The printer work most days however it seem that when network traffic increase
the printer queue will jam and stop printing job causing a backup and then all job for that printer stop. Also, unable to delete the job from queue.

Hi,
Do you have only single printer installed in your network?
If more than one, then does it occur on all printer? What’s the exact printer model number?
Have you tried to re install printer driver again?
As you have commented that when network traffic increase then you are facing issue, for that you can check the print preference if you have applied. Also check printer properties are set properly.
Here providing workaround to cancel printing queue, you can first try to stop print spooler service and then delete all the spooled files and then start back again the spooler service. It might help for your issue. You can refer
KB 946737 guide and step for details for reference.
Hope it helps!
Thanks,
Dharmesh

How to set two Star's TSP100 receipt printer on the same mac ?

Hello
For my restaurant I use a FileMaker homemade software that can use two ticket printers of the same type (Star's TSP100 receipt printer).
One is set as "Kitchen" in the underground kitchen and the other as "Desk" in the main floor.
Software must prints orders for kitchen on the correct printer and other receipts on the other printer. It uses Applescripts command to switch printer before printing.
Sometimes the two printers are switched and reports are printed on the bad printers.
Software is working correctly, orders for kitchen are always printed on the same printer and other receipts are also printed on the other printer. When printers switch, the kitchen receive receipts for desk and orders for kitchen are printed on the desk printer.
How can I fix the two printers to be sure that every orders and receipt are printed on the correct printer.
Thanks for your help

Let me first say I have never tried to do that...
I believe this is completely about the driver. 1 driver can only correctly identify one printer in print & scan prefs. I think you need separate drivers and separate ways to identify each printer. Like - another copy of the driver with different named file(s); and a printer utility that allows you to change printer name.
For Epsons the USB setup includes the Serial number - which allows the driver to differentiate. Does your driver do that? Maybe there is an alternate driver you can use for one of the printers? Check out the free Gutenprint driver. Search for gutenprint mac.

Ihave an ipad and an epson nx430 printer. I tried to print my airline itinerary and it printer 4 pages that was mostly ads. How can i print just the itinerary which fits on oneage?

I have an ipad2 and an epson nx430 printer. I tried to print my airline itinerary and it printer 4 pages ,most ofwhich were ads. How can i focus just on the information that i need?

Does the website you're using offer a "printer freindly" button or perhaps the faciltiy to email the intenerary to yourself?
Matt

How do I connect my Airport Extreme 802.11n to Epson 645 Printer?

I can't figure out how to connect my Airport Extreme 802.11n to my Epson 645 Printer. Can anyone help me? Thanks!

You may want to try reinstalling Mavericks. Airport Utility installed by Mavericks may no longer connect to your older AEBS (though I've not heard that.) Installing the Old AirPort Utility (Version 5.6) on Mountain Lion | frank.is.
Reinstall Lion, Mountain Lion, or Mavericks
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
     Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu.
     Repair the Hard Drive and Permissions as follows.
After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
     Reinstall Lion/Mountain Lion, Mavericks: Select ReinstallLion/Mountain Lion, Mavericks from
     the Utilities menu, and click on the Continue button.
     Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                three times faster than wireless.

Pages '09 and an Epson RX580 printer

I just made the jump to an IMac. I have run into an issue with printing envelopes with my Epson RX580 printer. I downloaded and installed the newest drivers that are available for Leopard from the Epson site for this printer. When I try to print envelopes, either an imported Word doc or one that I created from a template I have 2 problems. The envelope looks fine on the screen but when I print it the first issue is that it has to be rotated 180 degrees from what the printer manual says and my experience with MS Word is. Second of all, the left side of the return address is truncated and it prints lower on the envelope than expected. I have not changed any of the default setting for Pages. I did try playing around with margin settings. I eventually fixed the truncation but the envelope looked bad - text was too far to the right and too low.
If this has been answered, I missed it an do apologize.
Thanks,
Jeff

Sorry, I was away for a couple of days. When I start from a scratch and use an envelope emplate, I am assuming that the margins are being set by the template. When I view the image on the screen it looks correct. When I print the envelope its off by a little (ok enough to be annoying) not by a lot. If I go to inspector/page set up the page attribute setting is #10 envelope (4 1/8 x 9 1/2) which is the correct size for the envelope. Am I missing something?
Thanks,
Jeff

Can I use my MacBook Pro with 10.7.5 with Epson Stylus Printer photo R340

MacBook Pro with 10.7.5 with Epson Stylus Printer photo R340 can I make them work togather?

Try resetting the SMC. The phone connection is only supported for tethering. I know nothing about the other device.
Barry

Just updated the latest Epson software printer update from Apple. Now all my prints look solarized. How do I get rid of the new update and go back to the perfect prints I had before? Help please.

Just updated the latest Epson software printer update from Apple. Now all my prints look solarized. How do I get rid of the new update and go back to the perfect prints I had before? Help please. Wasting ink and paper at the moment!!!!!!
I have tried the printer with my laptop (not updated) and everything is fine. It's just the beautiful 27" Imac that can no longer print.

Might be a corrupted printer preference file ...
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here:
~/Library/Preferences
Click Go
Move the com.apple.PrinterPrefs.plist file from the Preferences folder to the Trash.
Restart your Mac, restart the printer...

I have a business and I use iCal for all my appointments, how can I print receipts from my MacBook to a receipt printer? I want my clients to have a receipt of the services that they have paid for, can anyone HELP ME PLEASE?

I have a business and I use iCal for all my appointments, how can I print receipts from my MacBook to a receipt printer?
I want my clients to have a receipt of the services that they have paid for, can anyone HELP ME PLEASE?

Well...I went to the modem (Westell, WireSpeed), found the NAT settings, once again, I'm WAY over my head, I am assuming this is a TCP connection (as opposed to a UDP) and per Lorex my mobile devices will use port 1025. So I gave it a "global port range" of 1-10 and I indicated that the "base host port" was 80, 1025, & 9000 (ports 1,2,3). When I selected the 'enable' it asked for a "host devise" my choices are my IPhone, IMac and the IP address for the dvr, so I choose the dvr. I still cannot connect and canyouseeme still can NOT find these open ports. This is taking up my whole day! I don't know how people figure this stuff out.

I have a new Epson wireless printer connected and the iPad recognizes it but it won't print. What is AirPrint and how do I connect it?

I have a new Epson wireless printer connected and the iPad recognizes it but it still won't print. What is AirPrint & how do I connect to it?

Patti-
Is your Epson printer on Apple's list of AirPrint capable printers? See <http://support.apple.com/kb/ht4356>.
If it is an AirPrint printer, then your WiFi router may not correctly handle Bonjour data required by AirPrint. Contact the router's manufacturer to see if there is a change to its setup or a firmware update, that will make it work.
One other possibility is that there could be a print job stuck in the iPad's print queue. Double click the iPad's Home button and a row of recent Apps will appear along the bottom of the screen. Scroll across and see if the Print Center is there.
Fred

HT3500 I have a new epson wireless printer but can not get my Mac laptop to print to it even after doing the installations. What do I need to do

I have a new epson wireless printer but cnannot get my Mac laptop to print to it. Any suggestions

Can you find your printer in Print & Fax?

I have a Mac and use an EPSON NX510 printer. I would like my printer to only print in black ink unless I otherwise indicate. How do I do this?

I have a Mac and use an EPSON NX510 printer. I would like to print in black ink only and cannot locate how to do this?

You usually find an option to print in black and white or gray scale in the settings of your printer that come up when you choose "print" in the file menu of the program you are using at the time.
BUT, if what you want to do is print with only black ink because you are out of ink in one of the color cartridges, that is usually not possible. For some reason I can't remember, printers makers prevent the use of the printer as soon as one of the color cartridges is empty.

I am trying to print a color photo on my MacBook Pro from iPhoto (not using Photoshop) using Epson 2200 printer, and everything I do in the Color Matching and Print Settings results in a photo with a pink cast to it. What am I doing wrong?

I am trying to print a color photo on my MacBook Pro from iPhoto (not using Photoshop) using Epson 2200 printer, and everything I do in the Color Matching and Print Settings results in a photo with a pink cast to it. What am I doing wrong?

Have you checked the ink cartridges and made sure the nozzles are clear? Are you able to print from outside of iPhoto with the correct color?
Try the following: make temporary copy of the library and do the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT

Trying to get Photoshop CS4 functional with Mavericks and an Epson 3880 printer. CS4 fails to send a file to the print queue. Have reinstalled the Epson 3880 driver for Mavericks. All looks good but no file is sent.

rying to get Photoshop CS4 functional with Mavericks and an Epson 3880 printer. CS4 fails to send a file to the print queue. Have reinstalled the Epson 3880 driver for Mavericks. All looks good but no file is sent.
Does anyone know how to fix this?

What EXACT version of Photoshop CS4 are you running? You should be on Photoshop CS4 v 11.0.2.
Also run Apple's software update to see whether it offers you the latest Epson update:
Printer Driver v9.33
Epson Stylus Pro 3880, Drivers & Downloads - Technical Support - Epson America, Inc.
MOST IMPORTANTLY: have Photoshop re-create its own Preferences:
To re-create the preferences files for Photoshop, start the application while holding down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Note: If this process doesn't work for you while you're using a wireless (Bluetooth) keyboard, attach a wired keyboard and retry.
Important: If you re-create the preferences by manually deleting the Adobe Photoshop CS6 Settings file, make sure that you only delete that file. If you delete the entire settings folder, you also delete any unsaved actions or presets.
Reinstalling Photoshop does not remove the preferences file. Before reinstalling Photoshop, re-create your preferences.
NEW Video! Julieanne Kost created a video that takes you through two ways of resetting your Photoshop preferences. The manual preference file removal method is between 0:00 - 5:05. The keyboard shortcut method is between 5:05 - 8:18. The video is located here:
How to Reset Photoshop CS6’s Preferences File | The Complete Picture with Julieanne Kost | Adobe TV
Mac OS
Important: Apple made the user library folder hidden by default with the release of Mac OS X 10.7. If you require access to files in the hidden library folder to perform Adobe-related troubleshooting, see How to access hidden user library files.

Epson Receipt Printer

Similar Messages

Maybe you are looking for