Epson scanner perfection 1200 photo not working since ML
hi,
my epson scanner perfection 1200 photo worked fine on snow leopard. since my upgrade to mountain lion (no lion in between), i cannot use it any more - although it is still in the list of supported models.
now i am on 10.8.2. i have downloaded the latest SW update with the scanner connected and switched on.
i can assign, unassign and reassign it in utilities. i can change settings (i cannot change the selection for scanning, though). but as soon as i do an overview scan, it will abort. same behaviour when trying to scan.
this happens identically when working in image capture or direct from print scan utility.
i have tried to remove the epson scan plist and the image capture plist from user preferences. no effect.
some time ago already, i got in touch with epson service. they sent an outdated installer and provided information different from their website. :-(
questions:
- did anyone get this scanner to work with ML?
- any ideas what to do?
thank you!
Hi All !
I installed the new drivers for my Epson Perfection V700 Photo. And it is working as supposed to !
Go on the Epson web site and download the drivers. Follow the simple instructions and be ready to drive your scanner as before !
Denis
Similar Messages
-
How can I use the Epson scanner Perfection V600 Photo in Photoshop cs5.1
How can I use the Epson scanner Perfection V600 Photo in Photoshop cs5.1
I am not able to see the scanner in photoshop.Are you using a mac or windows? And what version?
-
Epson Perfection V700 Photo Not Working
Since I successfully downloaded and installed Mavericks, I cannot use my Epson Perfection V700 Photo Scanner. I NEED this updated ASAP as I am in the middle of archiving and updating an online group. Epson do NOT have an upgrade, yet.
Does Apple have one yet?
Thank you,
Mark PattenHi All !
I installed the new drivers for my Epson Perfection V700 Photo. And it is working as supposed to !
Go on the Epson web site and download the drivers. Follow the simple instructions and be ready to drive your scanner as before !
Denis -
After upgrading to mavericks my epson scanner v 600 does not work
After upgrading to Mavericks my scanner V600 epson does not work, I keep getting a message to re-install the software, but even then is does not work
I'm having the same issue. The scanning software doesn't launch, the scanner appears in system preferences after a few unplugs and plugins, and software update doesn't give me the recommended ICA update.
Also the Epson scan utilities aren't updated either and will be "released soon" according to here:
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 139863&prodoid=63084673&infoType=Downloads&detected=yes&platform=OSF_M_X9
They recommend to use image capture (which is a joke) in the mean time or you could buy vuescan but thats not much better for some things. -
Epson scanner perfection 1670 is not detected on system preference pane
It use to work but now it only produces blank grey scans.
I have deinstalled and reinstalled new driver from Epson support site.
I have also tried cleaning the USB connection with no results.
I have noticed that when I tried connecting to the internet from the the scanner Help menu it tells me I am not connected (while I am) and I noticed also that the scanner is not detected on system preference pane.You can open System Profiler and under the Hardware heading you will see the USB entry. The printer should be listed under one of the USB busses. If you don't see it then the USB cable could be faulty or the printer itself could be cactus. So try another USB cable and in another port on the Mac. If the new cable and socket fails to make the printer appear in the USB view then the printer is the problem.
If the printer is visible under one of the USB busses then this would indicate that the printer and the USB cable is okay. In this case the printer should be capable of being added in Print & Fax. But if you select to add the printer and it does not appear in the Default view of the Add Printer pane then try a reset of the printing system, as described next.
1. Open System Preferences > Print & Fax
2. Move your mouse over the Printers list
3. Hold down the Control button and click the mouse
4. Click the "Reset printing system ..." popup
5. Restart your Mac -
I installed OS X Mavericks and now my Epson Scanner Perfection Series V330 Photo refuses to open. Is there a new driver available? I am scanning my work for a book publication and I need my scanner urgently. I tried Image capture but scanner is not detected.
Looks like all Epson scanners will fail under Mvrx. And who knows when an updated driver will be available. It's not as if they have had a while to do it already.
After I noticed mine wouldn't work, I deleted my Workforce 610 and re-added it by pressing the + and instead of going for the IP versions that may pop up, that they say to do under normal conditions, select the Bonjour version. When you select the new printer/scanner in the Printers & Scanners Control Panel, then open the control window and then look in the dock and see if your printer is there. Right click on it and go to "Keep in Dock" for easy Access. In the printer panel there should be a little picture of a scanner on the right side. Click on it or type Commmand-3 and the built-in scanner software/utility will come up. After playing with it I think it's better than and there are some cool features that are not in the stock Epson software.
Hope this helps. -
My scanner (Epson V300) does not work since mountain Lion upgrade.
My scanner (Epson V300) does not work since Mountain Lion upgrade. I updated the drivers,I can get it to work one time when I reboot the iMAC it will function (scan) one time and than not again until I reboot. Help!!!
Try trick #5, at > Eight amazing Image Capture tricks | Macworld
-
I have upgraded to Mountain Lion and have found that some of my software no longer works, notably Image Browser and also the Epson Scanner Perfection 3490 software. Is there a 'patch' or way to allow me to use these programmes especially the scanner.
Apple discontinued support for PowerPC apps with Lion, I think, so you're out of luck there. No patch coming, unfortunately. Best to upgrade whatever old applications you have or, since it seems like you're using some relatively old software, scout around for replacements that give you the functionality you need.
Go to Apple menu > System Preferences > Print & Scan and select your scanner from the list--if it's not there you'll need to add it (start with the little plus icon). Once you have it in the list you can click on the Open Scanner button and a pretty barebones scanner driver will load for you. But Image Capture (as mentioned previously), found in your Applications folder, will probably do the job as adequately, or better, than your old scanner software. -
epson scanner perfection 1640 SU <folder is not writeable> seem to happen after mountian lion upgrade .epson site says get the driver from apple. apple says no updates available. I had this problem the last time I upgraded but I do not recall how I fixed it.
Hello Achates:
I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
In that way, you will have a fresh copy of OS X and your current settings will be preserved.
Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
Barry -
HT6114 My Apple 7.2 mail does not work since I upgraded to OS X Mavericks, what has gone wrong?
My Apple 7.2 mail does not work since I upgraded to OS X Mavericks, what has gone wrong?
Have you tried using http://support.apple.com/kb/HT4505 guidance for scanning? Has always worked for me with my Epson scanner.
-
IChat Video Not Working since PSP3 bought!!
Hi guys,
ichat video not working since I bought and installed a new Playstation 3. I have a BT HUB that connects wirelessly with the imac. I have BT Vision running from the HUB too via ethernet wall boost adapters. I had this problem with video when i installed the BT Vision. And turned out to be something to do with Application Sharing settings on the HUB. I resolved it by correctly sharing AIM TALK with my wireless imac. Now the same problem has arisen since the psp3 was put on. But even with all the things I've tried I am stuck as how to get the video up and running as before. The devices running off the hub include:
1. imac (wireless via Airport Extreme)
2. BT Vision via ethernet and wall adaptors
3. iPod touch via wireless
4. PSP3 via wireless plug and play
I have checked all the ip address for these devices and have enabled app sharing for the imac wireless to AIM TALK in BT HUB manager. I have also opened my firewalls; changed the port setting to 443 in ichat preferences; re-set the HUB/Router;
Is there anything else I can do or check? As I said it worked perfectly before the psp3 went onto the
network. Should i assign AIM TALK to the imac wireless or to some of the other devices? (though I think I've tried that too!!)
Help would be much appreciated as this is driving me to insanity, if I wasn't there already!!!!
Take care, and thanks in advance for your help.
Baz, Belfast, Northern Ireland, Europe!!"speedtouch modem!"
Yes you do.
Thomson-Alcetel who make the Speedtouch range make this device for BT.
The Firmware is Thomson-Alcatels with BT Logo-ing.
This Ethernet 3 connection is probably internal.
Have you got System Preferences > Quicktime > Streaming set to 1.5Mbps ?
If not then do and restart iChat to see the new speed.
In Leopard the Automatic setting is read by iChat as 384K.
This may be allowing the PS3 to have too much of the bandwidth.
I or rather my son has a X-Box 360 which can be on-line when I video chat and it works for me, as it does when he uses his PlayStation 3
If the AIM talk setting uses the same port here as it is listed elsewhere then it has only opened/allowed port 5190.
This would have appeared to have been coincidental to any iChat use when you changed it.
Are you not using UPnP in this device ?
Which firmware is it up to ?
Anything above 6.2.2.6 should work.
Anything starting with 6 and containing letters is later.
In the .telephony section does it mention which port are open ?
9:00 PM Sunday; May 11, 2008 -
My morphie pack does not work since upgrading
My juice pack (Morphie) Does not work since i have upgraded the ios to 7.1.1
I have two iphones a 4s that has not been updated yet and also the 5s which has been updated. The 4s is working perfectly well with the juice pack but the 5s is absoultely crap to say the least. I complained to Morphie and to their credit the sent me a new pack and it has the same problem. This MEANS since the update there has been a change with apple and they have made our 100€ chargers redundant as I only get 20 - 25% extra battery when I should be getting a full charge
This is not acceptable for phones that are expensive and the accessories that we buy to go with them are also an additional expense and very expensieve to. That doesnt matter too much when they work, but then they dont it is NOT good.
Someone come back to us and give us a solution please.
Elena - a very loyal apple client with apple imacs in the office, mac book pros and air mac for sale staff along with ipad minis and iphones......... NOT A HAPPY CLIENT3l3na t wrote:
Thanks guys for the responses but I am not convinced this is a MOPHIE problem. Their customer service department have been great and look after their clients. I have two iphone 4s´s which have not been upgraded for fear of being left with the rubbish battery I have with my relatively new iphone 5s. Mophie have replaced the amost new juice pack that I had with a completely new one that has the same problem...... funny how this has happened since the ios 7.1.1. update
I have been using MOPHIE juice packs for a number of years and have never experienced anything like this before. It seems rather strange that after upgrading I have this problem that APPLE negates to rectify.
Of course I wouldn´t have to use a 3rd party accessory if the battery was made to last and if APPLE had an alternative, I would of course buy apple but they don´t. I am a huge fan of Apple but cannot run a business with phones that cannot be upgraded for the fear of loosing battery life which would mean loosing clients which would mean loosing my lively hood.
Full phone restore was done too.
Still not HAPPY
Sorry, as already stated your using a 3rd party accessory take it up with mophie.
I have no issue with my mophie after updating to 7.1.1 - so your theory is flawed.
My battery life can last up to a day and a 1/2 - I only bought the mophie as a backup battery and because it is bulky and can protect my phone in case I drop it. -
I have bought iphone 4s on July 12, 2012.in Zurich in offical Apple store (Glattzentrum) and after one and a half months it just turned off and not working since. I tried three charges and nothing (it detects that charger is on but it cannot be charged). So now I have a not working phone only two and something months after purchase. But the problem is that in Croatia we have two apple reseller stores and neither don't want to exchange it, although is under warranty!!!! The closest stores are 250 km from Zagreb...Of course I have contacted Apple store in Zurich but they told me to come in Switzerland or to send credit card data for receiving new iphone, the problem is I don't have credit card with 700 euro on it!!!! what to do?? who to call ??? where to get replacment device cause this is disaster???? I wanted to buy ipad but after all this I doubt to do so...I have not working Iphone payed around 700 chf or 800 usd and cannot change it in my country, is it possible for such vast organization like apple that this things can occur????? So much for customer support
“the EU is considered one country for warranty purposes“
Not the case at all whilst there are harmonized minimum standards governing guarantees, warrantees remain national as these vary (Add to) minimum legal protection.
Some how you need to get your phone back to Switzerland. -
My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion. I was wondering if there is a solution to getting this working again?
You just need to update it to the latest version. See:
http://kb.parallels.com/114449 -
My 2009 Canon MX860 Pixma printer not working since an upgrade to Yosemite on my MAC version 10.10. It is connected by USB. Have had no previous issues with printing, scanning or faxing. When trying to print my Calendar I only get light vertical dotted lines, none horizontal, no words and vague header colors. Checked printer image on the on my MAC which shows the same problem. All of the color and black cartridges are new.
The recent upgrade to the Canon application says it is completed but it is not, image on application upgrade is a circle with an X.
Any suggestions? Could this simply be a compatibility problem? I'd sure like to keep my Canon printer.
Thanks, LLCan you open System Information (Applications > Utilities) and select Printers in the left sidebar. If the MX is the only printer connected to the Mac then its information will be shown in the right pane. If you have more than one printer, then a list will be shown in the top right pane. Select the MX to see its information in the bottom right pane. Can you copy this information and paste back here for me to check.
Also an FYI - this is the Mavericks forum. The Yosemite forum is here
Maybe you are looking for
-
I am wondering this because today I went to an AT&T store since my IPhone 3GS is working not so well and I barely got it about four months ago,they said that I would have to go to an Apple store which I am going to do Sunday but my IPhone 3GS be exch
-
Motion 5 Crashes when selecting a .txt file in the file browser.
This is my crash log: Process: Motion [2693] Path: /Applications/Motion.app/Contents/MacOS/Motion Identifier: com.apple.motionapp Version: 5.0.7 (221398) Build Info: Motion-22139008018000000~1 App Item ID: 434
-
Search tab has stopped working in .CHMs
I maintain several .CHMs for a client. For a reason I can't figure out, the Search tab of any .CHM that I've updated recently no longer works. Any search attempt results in "No topics found." I verified that any older versions of .CHMs have working S
-
I open up iTunes and my library is completely empty!
It looks as if it just reset itself to how it was when I first installed it, everything gone! What do I do???
-
I apologize for asking a really basic question, but I did a forum search and none of the results seemed to help. I have a very difficult time navigating/trusting forums and wikis as many advanced search engines omit results despite accurate search te