Epson Stylus C88 won't print

I haven't printed to this printer in a while, so who knows what happened, but today, I try to print, and the print queue for my Epson Stylus C88 will show every job with a Status of "Error".
The queue says "Printer Ready"
The Epson Printer Utility can communicate with the printer
The driver is 9.00. Software Update does not say that any new driver is available.
I'm on Mac OS X 10.7.5
Any ideas?

Unfortunately, deleteting the print jobs from the queue usually fixes this issue.
Then restart your Mac and try printing.
If that doesn't help, might be corrupted printing preferences.
Open a Finder window. From the menu bar click Go > Go to Folder
Type of copy paste the following:
~/Library/Preferences/com.apple.print.PrintingPrefs.plist
Click Go then move the com.apple.print.PrintingPrefs.plist file to the Trash.
Restart both the Mac and the printer.

Similar Messages

Epson Stylus C88+ won't print from iPhoto 6

Recently bought an Epson Stylus C88+ printer to replace the Stylus C86 that is not printing well anymore. Discovered that the C88+ does not print from iPhoto 6.0.5! The printer does print from Photoshop Elements 2 and does print documents fine. When we choose "Apple P" it starts the printing process, makes the starting noise, but then stops and the red exclamation point appears next to the printer icon on the dock. The original driver came from the printer's install CD that came with printer. I had seen some instructions from Epson about removing and reinstalling the printer driver, so I have done the following: 1) removed the 2 printers above from the Printer Setup Utility, 2) reset the printing system in Printer Setup Utility, 3) removed the Epson folder from the Library folder in Mac HD, 4) deleted the Epson printer receipts from the Library folder in Mac HD, and 5) reinstalled the C88+ driver from the Epson website. It still does the same as before. Any othe ideas?

I'm not sure what I should be looking for in Page setup settings and iPhoto print window. How do I check the driver in Printer Setup Utility? I already added the printer after reinstalling the driver from the Epson website; Printer setup utility seemed to find the driver when I did that because the printer is listed and printer is otherwise working.
I also looked at Colosync utility as you suggested and found my computer under devices and verified the Profiles in Profile First Aid. Nothing was found wrong for any Epson device, only some Lexmark profiles were incorrect (they must be ones installed with Tiger that I don't use), so didn't do the repair.
Here is what it says in System Profiler for the printer (doesn't actually say Epson USB and I wonder what the question mark means):
Stylus C88:
Status: Idle
Print Server: Local
Driver Version: 2.72
Default: Yes
URI: usb://EPSON/Stylus C88?serial=FGS020609051637250
PPD: EPSON C88 Series (1)
PPD File Version: 1.0
PostScript Version: (3011.104) 0
I'm not sure where they get that serial number from. The one on the back of the printer is totally different. I was a little suspicious that nowhere in the Printer setup utility or system profiler does it actually say I have a C88+; it just says C88 series, etc. It says on the C88+ download page says I would get driver v2.7aA. I guess this is the same as what I have. I was warned by Epson that the C88 and C88+ are 2 totally different printers, but when I checked the C88 download page it says I would get v2.5bA, so I don't think I downloaded the wrong driver.
For anyone else who has the same problem, I have discovered that as a workaround I can open photos in Photoshop Elements from iPhoto and can print them using Elements, so I'm ok unless I want to try printing an iPhoto greeting card, etc.
Thanks for any additional thoughts.

Epson stylus c88+ will not print from photoshop elements 13

I am using Photoshop Elements 13 to edit some images. I am trying to print on the Epson Stylus c88+ inkjet printer but i am getting an error that the saved printer information is not compatible with this version of Photoshop Elements. What do I need to do? I have uninstalled and reinstalled the printer but it still does not work.

Try GutenPrint:
Click here to begin autodownload: http://tinyurl.com/8ctlaw.
You might also benefit from installing Usbtb & the latest Ghostscript & CUPS:
Click here to begin autodownload: http://tinyurl.com/9mgm38.
Here's a link to GNU Ghostscript 8.63: http://tinyurl.com/9g9tx9.
Here's a link to CUPS 1.3.9: http://tinyurl.com/yuckcm.
Here's a link to Foomatic-RIP:
Click here to begin autodownload: http://tinyurl.com/4ep5dv.
Finally here's a link to HPIJS:
Click here to begin autodownload: http://tinyurl.com/ayhp9z.
You should find that your HP printers print much faster now since Usbtb is faster than Apple's built-in USB drivers that they ship with Leopard by default.
<Edited by Moderator>

Epson Stylus S21 won't print on OS Mavericks

Hi,
I've been able to install my epson printer on my macbook but it won't print.
Every time I try to print, an error occurs and when I go looking for the fault, I find the following message:
"The function 'CGContextErase' is obsolete and will be removed in an upcoming update. Unfortunately, this application, or a library it uses, is using this obsolete function, and is thereby contributing to an overaal degradation of system performance."
Is there any way to solve this?
Thanks

On this page: Support and Downloads - Epson Stylus S21 - Epson it looks like the last driver Epson had available for "OSX - Intel" was from 2009, so it would appear that there is no Mavericks-compatible driver for your printer.
You could try this, though:
uninstall all Epson apps/"utilities"
go to System Preferences > Printers & Scanners > Print
control-click on your printer in the column on the left
select "Reset Printing System..." and "reset" in the dialog that follows
printers & scanners and it should see your printer and download a driver for it from Apple (if there is one)
If that doesn't work, try the Generic PCL printer setting in Printers & Scanners: OS X Mountain Lion: If the software for your printer can’t be found (the reference is for ML but it still applies to Mavericks)
if that doesn't work, see if there is a driver for your printer at Gutenprint for Mac OS X

How to install Epson Stylus C88 printer on 10.9.3?

How do I install Epson Stylus C88+ printer? Is it supported by 10.9.3?

Hi Janet ...
There is a driver available for v10.9 Mavericks to download here > http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=58602&BV_UseBVCooki e=yes&infoType=Downloads&platform=OSF_M_X9
After you download the driver, open System Preferences > Printes & Scanners then select the Print tab.
Then click ➕ to install the printer.

Epson C88 Won't Print with Snow Leopard

C88 won't print using Snow Leopard. Downloaded driver from Epson doesn't help.????

Like you, I'm working with an Epson C-88+. Happy with this situation, would not be exactly accurate. I have tried some different approaches, including the ones from John and Kappy. They would work just fine for about 3 days, then fail. I even went back to the Snow Leopard Install DVD/ Optional Installs/ Options.MPKG/ Printer Support and made a choice. I then went to Disk First Aid and everything was fine. Today, I went to print 1 envelope, total dismal failure. I then downloaded the EPSON Printer Drivers 2.1, I proceeded to install the drivers. Did anybody notice, this was an Apple License, not an EPSON License? Therefore, there are no assurances, that these print drivers are in fact, EPSON. Therefore, AppleCare should be required to support these Print Drivers as Apple Licensed Products. But equally so, we as 'dumb endusers' must try to work with AppleCare to solve this issue. To "pete.purvis" John and Kappy, sorry, you guys have proven yourselves to be out of the "dumb endusers group, I just want to say, THANK YOU!

Epson Stylus C88+ not compatible

I have Mavericks 10.9.1, and my new Epson Stylus C88+ is not compatible. any advice? I talked to Epson, they had no solution, said i should talk to apple.

The Epson C88 driver won't work?
You could try the Gutenprint drivers, they have one for the C88.
http://gimp-print.sourceforge.net/p_Supported_Printers.php

Purchase advice? Considering the Epson Stylus Photo R3000 Inkjet Printer

Please advise - we're considering the purchase of the Epson Stylus Photo R3000 Inkjet Printer.
Replacing an Epson Stylus Photo R1900 after years of frustration due to no support for printing from Illustrator on a Mac. Many others have posted in frustration as well - a common work-around is to save as PDF, then print from PDF. Our work-around involves PrintFab but we would like to remove that element from the equation.
We have a sizable investment in Epson paper so staying within the Epson family is necessary.
Also must be able to print at 13x19 inches (Super B) which limits our choices.
Given all of the above, can anyone advise for or against the R3000?
Thanks in advance!
-Chris

This Apple document says the driver is available for auto-download and install when you add the printer in Print & Scan:
OS X: Printer and scanner software available for download
OS X has a new paradigm for getting print drivers.
Manufacturers give the current driver(s) to Apple to put on its servers.
OS X keeps an "index" of where to find drivers (whether on the server or already installed on your Mac), and when you Add the printer in Print & Scan prefs, or on demand in the print dialog, OS X finds and uses the driver.
No need to download and install anything yourself.
If your Mac says it can't find the driver, you can force CUPS (OS X's print system) to re-build the index of drivers (both online and already installed drivers) by Resetting Printing System:
OS X Mavericks: Reset the printing system
If you're still not getting it working, you can download and install all the epson drivers from:
Epson Printer Drivers v2.18 for OS X
(you may still need to Reset Printing in order to have the drivers found.)

Upgraded to OS 10.4.7 /Epson Printers Sylus C82 and Stylus 740 won't print

My two printers stopped working after upgrading to 10.4.7. both printers connected directlty through USB. I have a Stylus C82 and a Stylus 740. I switched to the S 740 thinking it was a printer problem, but after printing normally a few pages, the same happened to the S 740.Won't print with black ink, the printer head moves as if printing, but the page comes out blank. I have reset the printers from both, the the Printer Browser window and the Printer Setup utility using Reset Printers. (Nozzles and Ink are fine on the printers). I have tried to print docs in different applications (Word, TextEdit, etc) but the same happens. I have reinstalled OS10.4.7 from CD but still the same problem.
The message that shows at the console when printing:
Attempt to release a printing object without first doing a retain!!!
The cups error_log at /var/log/cups reads the following:
E [29/Jul/2006:11:24:49 -0700] [Job 5] fatal: Communication error with the printer. Please reset (or turn on) the printer and try printing again.
E [29/Jul/2006:11:24:49 -0700] PID 338 stopped with status 255!
I [29/Jul/2006:11:24:49 -0700] Hint: Try setting the LogLevel to "debug" to find out more.
I NEED HELP!!!

See http://docs.info.apple.com/article.html?artnum=301631
Mac OS X (10.4.7)

Epson stylus Pro 9600 problem printing?

We have 3 Epson stylus pro 9600 connect to LAN network and the latest driver 8.6.1. We have Mac Pro with Lion installed 10.7.4. We tried to print the progress comes up and then it says error. This is what we did to solve the problem: 1. we unplug the LAN Cable and plug directly to the Mac Pro
                                                                                                               2. we unplug the the cable from the printer settings still had green light
                                                                                                               3. we used IP addresses too
                                                                                                               4. we turn off the printer and restarted the Mac
                                                                                                               5. it only works with USB. This defeats the purpose of using the LAN.
It seems the printer or Lion does not recognize each other. It won't print!
Any solutions.
Thank you in advance
Luis

Adobe blamed Epson drivers for not anticipating CS3's changes. Like they're clairvoyant or something. Their reason was that it was too hard to take into account every printer on the market when writing the new (unasked for) CS3 printing module. A feeble excuse when it comes to Epson pro machinery, though - it is the industry standard, after all.
Solution? - use CS2 for printing, authored back when Adobe wrote its software to be compatible with existing equipment and drivers, not expecting the world to fall into line with whatever it decided it would do. CS2 works flawlessly with my 7800, CS3 remains a basket case for the same reasons you mention, though checking/unchecking the fine detail box makes no difference. CS3 is erratic - sometimes it works as directed, but then out of nowhere it will suddenly decide to attenuate a pano print.
We'll see if they get it right with CS4's "improved" printing, but don't hold your breath.

Epson Stylus CX7300 will not print after software update

After doing the latest update for my Epson Stylus CX7300 printer it will not print. When i open the printer utility it comes up with a communication error. I can still scan documents but i can't print or even print a test page, check ink levels etc.

Hi Kerry Bonney,
Welcome to the Apple Support Communities!
If you are having issues printing after running a software update I would recommend using the troubleshooting steps in the following article. It sounds like you have already completed some of these steps, but I would recommend reading over and working through the steps provided in this article.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Have a great day,
Joe

[SOLVED] Epson Stylus T23 doesn't print anything

Hi, I've been using Archlinux for two years and I'm proud and happy of it. This is the first time I write something in a forum also. I hope someone could help me to solve my problem.
I recently received an EPSON STYLUS T23 printer, and I cant make it work under Arch... CUPS recognizes it (I think) when I configure the printer in http://127.0.0.1:631... the name of the printer appears on the list of connections (EPSON Stylus T23 USB#1 (EPSON Stylus T23)). The problem, I think, lies on the driver I select for the printer... I've read in http://www.openprinting.org/show_printe … Stylus_T23 that the recommended driver is pips-st20, But in AUR appears an old version of pips (current-version=3.1.0, aur-version=1.0.1), the old one doesn't compile... and the new one... I don't know how can I compile it for Arch.
Can anyone help me to make it work under arch?... Instructions on how to compile it... If someone makes it work (or similar printers)...
PD1: I apologize if my english is wrong... my natural language is spanish
PD2: The printer does work under Debian's based distros, under Fedora and Mandriva... I don't want to change the best distro because of a printer u.u
Last edited by victor.vs (2009-07-09 03:50:40)

skottish wrote:
Welcome to the forums.
Have you tried using the drivers from Gutenprint yet? They have the T20 listed on their website and it looks as if that's the recommended driver from you post. The Gutenprint drivers are far superior to anything else for Epson printers.
Thanks a lot!... it was solved by just installing gutenprint. I've already printed the test page

Epson 740 Inkjet won't print from Epson Driver!

Hi All,
I've just recently upgraded to Tiger, from Jaguar, and all was well...until today! My colour printer is an Epson Stylus 740 and it was printing perfectly yesterday but now the all jobs are "Stopped"!
If I click on "Start Jobs" the progress bar appears then, after a couple of seconds, vanishes and I'm back to "Jobs Stopped" with the file still in the print queue. That's it! No other indication of a fault or problem.
I have now configured the printer via Gimp Print (V5.0.0) and it works fine. So the printer is ok but I'd like to use the Epson driver as I'm used to it and know how to get the results I want.
If this was OS 9 I'd suspect a corrupted file in the spool folder but, even though I've used OS X for years, I don't even know if there still is a spool folder! I certainly can't find one.
Any ideas?
Thanks,
John

There are tons of posts on similar problems in this forum. Do a search for stopped jobs and you'll see. There are a lot of suggested fixes, it sounds like some work for some people and not for others. Also, although it sounds like it's usually Epson printers, it's not always. And it's all different models. I have an Epson Stylus CX6600. I haven't had a chance to try all the fixes yet, but one that did work for a couple months for me was this:
Before printing, go into your application's "Page setup" option and make sure that the "Format for" says your printer and not "Any printer." I'm not sure why this works but it's even on the Epson tech support website in their troubleshooter. You will have to do this for every application and it quit working for me after I updated to 10.4.5, but maybe it could be a temporary fix for you as well.
Please post if you come up with a more permanent solution!

Epson Stylus Color 1280 not printing with Mac OS X 10.6.8

I have an Epson Stylus Photo 1280 printer (driver - Apollo P-2100 - Gutenprint v5.2.3) and am running on Mac (OSx 10.6.8)
It WAS working but recently.... I changed the ink cartridges and it powers up with green light on. Once I try to send a job to the printer it quews up and looks like it is going to print but then the icon suddenly disappears from my desktop and it is cancels the printing???

krea8iv wrote:
I have an Epson Stylus Photo 1280 printer (driver - Apollo P-2100 - Gutenprint v5.2.3) and am running on Mac (OSx 10.6.8)
It WAS working but recently.... I changed the ink cartridges and it powers up with green light on. Once I try to send a job to the printer it quews up and looks like it is going to print but then the icon suddenly disappears from my desktop and it is cancels the printing???
Did you recently change the driver you are using? I don't see how a driver for the Apollo P-2100 will work with an Epson printer. I would suggest that you delete your printer and re-add it using the correct driver.
You could also use the Epson supplied drivers available at http://support.apple.com/kb/DL1398

Cannot add Epson stylus photo 1400 to printer list

Hi,
I just unpacked my new printer, however I don't seem to be able to install it properly. I have tried both the the driver from the website as well as the one that came with it on CD. First, installing seems to go smoothly. Then I get to a screen telling me that before I can print I will have to add it to the printer list. The next screen gives me the printer list with the Epson Stylus's name on it. However, clicking on it I am not able to select the proper device name. It just doesn't appear on the list. (click here for a screenshot: http://img8.imageshack.us/img8/8601/bild15zy6.png ) Finally, the Epson driver installation app tells me that my printer "has not been added to the printer list" and that I should better go back and try again. "Running a printer check" actually makes it draw paper in but doesn't print anyhow.
Could someone help me with this?
Thanks a lot.

I now managed to install my printer. To state my problem first, so people don't have to read the whole thread again:
My printer (this should be printer model independent) is connected directly via USB to my macbook. When I tried to add it to my printer list, I recieved the message "Error: -9672, An error occurred while trying to add the selected printer"
As I gathered from the forums, this points to missing rights during installation. In a lucky guess, I logged onto my computer not with my usual account but with the admin account and from there I could install it without any problems!
That is a bit strange as I should have been able to assign admin rights via entering the password from my usual account, but there you go. Strange are the ways of Apple (as with my most favourite mac problem/solution of all times: when you use the password reset feature from the install DVD, it uses an english keyboard layout, but in the standard log-in window it uses whatever the locale is set to, thus e.g. mixing z und y in German layout amongst others. This small misunderstanding cost me hours over christmas! Just thought I'd mention it in case anyone has similar trouble)
I hope this helps,
Otto

Epson Stylus C88 won't print

Similar Messages

Maybe you are looking for