Epson stylus cx 3800 won't work after upgrade to osx 10.9

I installed OS X 10.9 on my MacBook Pro and now my printer Epson Stylus CX 3800 won't work. I uninstalled the printer and tried to reinstall with original epson software but computer won't download it. Perfectly good printer worked yesterday but not today. Any suggestions would be appreciated.

Hi ,
I had the same problem , But i fixed the issue by updating patch . Hope this link can help you for all version
as this has patches and explained
http://news.idg.no/cw/art.cfm?id=297D2650-EC09-00A1-048BD74750266743

Similar Messages

ICloud email won't work after upgrade

iCloud email won't work after upgrade to Mountain Lion. Says pop 3 server is timing out. Solutions?

I'm sorry, as I keep saying... in MAIL I get the message that it cannot cannot to server!? Did you read the initial problem at all! I know exactly where mail is, although, the diagram was wonderful.
My problem is TWO FOLD.
The MAIL app doesn't work with iCloud but does work with my POP3 email for my office.
Second problem is the iCloud on Safari doesn't work as I get the error message as the screenshot above.
There is NO reason why the @me.com email shouldn't work through the iCloud site, as you can see, there is a also a Mail icon.

HT204350 scanner won't work after upgrade

scanner won't work after upgrade

Hey srohall,
Thanks for the question. I understand that you are experiencing issues with your scanner after updating to OS X Mavericks. To troubleshoot this issue, we’ll want to follow the same troubleshooting steps for printers:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Follow these steps until the issue is addressed:
1. Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
2. Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
3. Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
4. Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
5. Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
1. Reset the printing system, then add the printer again.
2. If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
3. Contact the printer vendor or visit their website for further assistance.
Thanks,
Matt M.

Mail won't work after upgrade to 3.0

I cannot get my Mail program to work after upgrading to 3.0. It starts, searched for new mail, then quits. I cannot get or send new mail. The program does not operate. Suggestions, please?

I get the exact same thing. The status just keeps showing "Connecting..." and it never seems to connect. Oddly enough, I just updated to the new OS on my iMac at home and immediately after, I couldn't connect to mail from the computer. I had to manually download a component of the update and once I did that, mail worked just fine. Probably just an odd coincidence having nothing to do with the mail issues on the iPhone but I thought I'd mention it.

Itunes won't work after upgrading to Mac os x 10.7

How can i fix itunes, it won't open after upgrading to Mac OX lion??

Downloaded and reinstalled. Still crashed instantly after trying to open or create a document. Below, from Crash Report:
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000044
Crashed Thread: 7
Thread 7 crashed with X86 Thread State (32-bit):
eax: 0xb0427d48 ebx: 0xb0427c38 ecx: 0xb0427b38 edx: 0xb0427b3c
edi: 0x00000009 esi: 0x00000000 ebp: 0xb0427b18 esp: 0xb0427ae0
ss: 0x0000001f efl: 0x00010283 eip: 0x94bc9f4b cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
cr2: 0x00000044
Will attempt your suggestion.

Keyboard shortcut command-w stopped working after upgrading to OSX 10.9.4

Dear all,
after upgrading to OSX 10.9.4 the keyboard shortcut command-w stops working after about 30 min of having the machine powered on. Interestingly, this phenomenon is not restricted to a certain app (Safari, etc.).
In system preferences > keyboard all settings have been set to "default".
Anybody else having the same issue?
Many thanks,
wolfgang

Hi folks,
just as quick documentation for possibly other error sources for the problem "shortcut command-w not working":
If problem persists close all applications (allL!). Then open one app like Safari, open several tabs and check whether command-w works.
Reason: it could happen that you've set command-w inadvertently in another app like Snagit. And when setting this the app did not tell you "listen dummy, this is a standard command, do you really want to replace a standard command with a app-specific command. Don't be surprised if it doesn't work when the app is running."
This is what happened to me. So close all apps and check whether problem persists.
reg,
wolfgang

Epson Stylus Pro 7700 will not work after installing Mountain Lion, I have update all drivers and firmware

This is a large format printer used for proofs that I cannot use since upgrading to Mountion Lion, anyone else had printer issues?

Checked RoaringApps App Compatibility Table. These are apps not drivers but..
All I see listed is:
- Epson LFP Remote Panel 3.6.1 and with a ? under Mountain Lion
- Epson Printer Utility 4 8.6.1 and red X indicating non-compatibility with Mountain Lion
- Epson Scan 3.7.5 and a green check mark showing compatibility with Mountain Lion
http://roaringapps.com/apps:table/tags/_e/index_tags/_e
On the Epson Website. Under Drivers and Downloads for the Stylus Pro 7700 with Mountain Lion, it looks like there is:
Drivers:
- Printer Driver v8.63
Utilities:
- Remote Panel 2 Utility v1.30
- Uninstall Center v1.1.0
Firmware:
- Firmware Update version KND14BA
Epson Stylus Pro 7700 Printer - Drivers & Downloads
Did you download and install all of these from the Epson website?

My itunes store, app center, safari and mail won't work after upgrade

I am very dissapointed in the new maverick upgrade. My app center, itune store, safari, and me mail won't work with the new upgrade. I called the help desk and they had me uninstall and re install the upgrade. he said i should have everything backed up cuz I will lose everything, but nothing was lost. It worked for a day, but now it doesn't work at all. it just gives me the hourglass circle symbol and finally times out. A couple of times my computer gave me an error code that i wasn't connected to the internet, even though I could use chrome no problem. Another error code I got was that I wasn't signed in, but I am. Any suggestions?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Sd connector won't work after upgrading to ios8.1

after upgrading to iOS 8.1 my official lightening SD connector won't work, when I plug it in it says " cannot use device sub storage: the connected device is not supported"'is anyone else having this problem if so how to fix it, my sd connector worked fine when I was on ios7.

Same here, I have an iPhone 5s and it is really frustrating, all news app, twitter, whatsapp have stopped to Push any notification unless my device is awake !! only emails are fine - once I awake the iPhone, dozens of notifications pops up which make it really hard and annoying to read and follow !!!!
Please advise!!
Noting that i have tried to reset settings, backup and restore, install all updates....etc nothing worked !!

HP C7280 Solution Center won't work after upgrading to Windows 7

I was running Vista and connected to the C7280 both wired and wireless. Last month or so has been wireless with no issues.
I upgraded to Windows 7, reinstalled the driver I had, and now when I try to scan I get an error that says "An unsupported operation was attempted" that pops up twice, then I get an error that says "An invalid argument was encountered".
Then a pop up window gives some steps to try to fix the problem.
I downloaded and installed driver PS_AIO_02_Net_Full_Win_WW_130_140.exe which didn't work.
I then removed the printer from hardware, and uninstalled the Solution Center software,
Re-installed driver PS_AIO_02_Net_Full_Win_WW_130_140.exe C7200 driver package and
installed dot4patch_reboot.exe,
shut the printer down, unplugged it for a few minutes, rebooted the computer, and
the same errors occur.
The driver is a year old, and I can't find a newer version.
Released:
2009-10-20
Version:
13.1.0
The patch is a few months newer but it didnt help either.
» HP Print Software Patch When Upgrading Vista to Windows 7
2009-12-06 , Version:1.0, 1.22M
This Windows 7 patch fixes some printer functionality after upgrading Vista to Windows 7. For networked printers, please go to www.hp.com for more support information.
Any help is appreciated.
This question was solved.
View Solution.

Finally got this problem fixed. No Thanks to HP Support
I installed the software for an HP Photosmart Premium C410 series and it corrected whatever problems I had with the HP Solution Center scanning problems in the C7280 printer software.
Go Figure ......

G4 AGP Graphics - 2nd display won't work after upgrading from os 10.2

I have a desktop G4 AGP Graphics with two displays. When I was running os 9-10.2, the second display worked fine, but after upgrading the os (now running 10.4), the second display still works, but has turned gray and pixelated.
When I take a screen shot, the picture shows that both displays appear clear (and in color).
Am I missing something? Thanks in advance for any suggestions

so do you have 2 different video cards driving two different monitors? or is it One video card with 2 displays?
the info you listed isnt very detailed but it does tell me you got an ATI video card with 16MB VRAM.
I assume that thats the Stock AGP 2x graphics card that came the The PowerMac G4 AGP graphics model.
why is your display set to 8bit depth? a stock 2x AGP card with 16MB VRAM should be able to support 16bit or 24bit depth even at 1024 x 768 res.
the info says also Core image not support as well as Quartz Extreme no supported. Which is significant because it could be why the 2nd Monitor doesnt display properly with Tiger.
under 10.2 there were less stringent requirements for driving video.
OSX 10.4 Tiger is much more advanced OS and has higher graphics cards requirements now.
I could be wrong, but I think you may need a newer video card that supports Quartz Extreme and Core image.
hopefully someone else will run by this topic and offer some insight aside from my own.

USB- hub stopped working after upgrading to OSX Mountain lion

I have a macbook pro 13 inch, year 2011.
On my desk, I attach it to a thunderbolt display. To those USB-ports, I attached the belkin desktop USB hub (model F4U017) with 7 USB ports.
All worked fine and without a glitch untill I upgraded to OSX Moutain Lion.
Suddenly it won't connect annything I plug into it.
All the cables of the hubb still work fine, those have been tested.
When I tested the hub with a very old iMac (i think still with leopard it), it worked again.
To be sure, I also tested a 4-port hub without external power supply on moutain lion. That one still works fine.
How come my 7-port hub won't work any longer? How can I make it work?

Not sure. Might be an issue with the USB drivers in mountain lion.
I've had an issue with a couple hubs not working after plugging back into my macbook pro while it's on.
Fixed by restarting my computer, but that's super annoying and takes me back to my Win 95 days. Never saw this issue before I upgraded to mountain lion.

Cannot get Airplay to work after upgrading to OSX 10.8/iTunes 11.1.3

I have recently upgraded my Mac Mini to OSX 10.8.5 from OSX 10.7.5 and am now unable to play music or internet radio on my stereo. Under OSX 10.7.5 I was able to play iTunes (11.0.3) music and internet radio on my stereo wirelessly via of an AE (A1084).
As part of the update to OSX 10.8.5 a newer version of iTunes was installed (11.1.3) and from that time on I have been unable to play music or internet radio on my stereo. Whenever I attempted to connect to the AE I received a message stating, "An error occurred while connecting to the AirPlay device Stereo Airport Express G. The network connection failed." I could, however, play both music and radio on a speaker attached to the Mini via USB cable.
Thinking it was the AE causing the problem, I replaced it with a newer version, an A1264. This upgrade now allows connection to the AE and the music/radio begins to play on the stereo, however after a few seconds the transmission cuts out only to resume after about 30 seconds. This stop/start of the transmission had me thinking it was a buffering problem.
I tried this suggestion found on the Forum:
First delete any files that start with 'com.apple.itunes.*' in ~/Library/Preferences/ByHost/. This will clear your iTunes preferences.
Next, open Terminal.app and run each line one at a time:
defaults write com.apple.iTunes file-buffer-size 512000
defaults write com.apple.iTunes stream-buffer-size 512000
No luck. I still get stutters and skips.
To compound the matter, I have an iPod running iOS 6.1.3 (M540LL/A) with Tunein Radio installed that I use to stream internet radio to the same AE/stereo with no problems, so I know the modem/router feed is good and that the network is functioning properly.
Strangely, I have read no other posts of this problem cropping up after upgrading so it may be a setting on my system that is causing the problem.
Any suggestions?

I have what sounds like a very similar issue.
I had my Denon 3312ci working perfectly with Airplay from my 2013 iMac running iTunes. Upgraded to iTunes 11.1.3, and now when I attempt to Airplay direct from iTunes to the 3312, it plays for about half a second and then stops. Displayed on the Amp then says "Assigning Network". The amp starts dropping ping packets at this point. About 15-20 seconds later the pings start coming back, but no Airplay.
I tried different network cables, resetting the microprocessor, a different switch, changing between DHCP and static IP. Was about to make a warranty call to Denon, when I thought maybe I should try Airplaying directly from iphone and ipad. Much to my surprise, it worked from those devices.
I prefer to use my iMac to Airplay rather than ipad/iphone as I found I got next to no audio drop outs using it that way (they are both using wired network), where as ipad/iphone occasionally would get a moment of silence in the middle of a song.
My network set up is fine. I can use internet radio and connect to DLNA services fine on the amp. It is just airplay between iTunes 11.1.3 and the amp where the issue lies.
No fixes as yet, but I have logged a support call with Denon Australia to see what they say.

Face time stopps working after upgrading to osX 10.9.2

I upgraded to OSX 10.9.2 last night and facetime stopped working. If I call out to my wifes ipad, it rings my ipad which uses a completely different email. If I try to answer the call on the ipad facetime fails. If I let it ring off the hook the call facetime fails. I have already run through the troubleshooting listed on the support sites that Mat 00 suggested in another thread such as playing with the date and time settings and that does not fix the issue. The computers connection to the internet is working and I have full functionality otherwise. Any suggestions?

Hi,
On the first issue of calling the apparent "wrong Number" or Apple ID I would check the Address Card in the Contacts app for that person.
Also Upgrade tends to refer to OS X major Named increases in the Mac OS X version Numbers such as OS X 10.8.x (Mountain Lion) to OS X 10.9 (Mavericks).
Updates tends to be the ones in between, such as OS X 10.9.1 to OS X 10.9.2 for example.
I would remove the Apple ID from the FaceTime App and then shut it off and Quit.
Then I would restart the app, add the Apple ID and Enable it again.
9:11 pm Saturday; March 22, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Epson Stylus Color 740 won't print after Tiger "upgrade"

Just loaded 10.4 onto my iMac G5. Now it won't print.
Any ideas what to do?
Thanks, guys!
Lindsay

Try Reset Printing System, a menu choice in Printer Setup Utility.
You haven't tried installing anything - don't!

Epson stylus cx 3800 won't work after upgrade to osx 10.9

Similar Messages

Maybe you are looking for