Epson Stylus CX3810 scanning problem
I can print fine with this printer as it has a driver in the Mac, but I am unable to scan, fax or see and supply information such as what ink I am out of etc. Is there other drivers I need to download or do I need to get a new printer??
Try this link,
it has access to some information you may find useful:
http://www.xlr8yourmac.com/feedback/scannerswith_OSXleopard.html
You may end up having to use a third-party utility to scan files.
Hope it works out for you.
Regards,
Peter.
Similar Messages
-
when i 'upgraded' to Mavericks, it locked me out and shut down my computer. now it won't print from my Epson Stylus CX3810. Epson doesn't have the driver to download and neither does the App store. Suggestions?
I'm having similar problems with my Epson Stylus DX5000. There was no in-built driver available (the generic old and new Stylus drivers didn't work), so downloaded the latest driver from Epson site. It shows as being available to print to, but just sends data to the print queue then job disappears.
I hope you're right C F McBlob, I could do with printing today but if there are new drivers available from November 5, then so be it. -
Epson stylus CX5500 - scanning size
Hi,
I having problems with my all in one printer and scanner (Epson stylus CX5500). I can open the scanning program in both printers and faxes and image capture, and the 'overview scan' is fine and captures the whole document/image but when it does the analysing scan it separates the document and only scans and saves certain sections of the document/image. The 'detect separate items' is not selected. Only getting bits and pieces of a document is very frustrating.
Open to any relevant suggestions
Thanks.
Message was edited by: embrenWhat software are you using to scan with?
-
Epson Stylus CX6600 scanner problem with 10.6
I've read various posts about scanner functions not working after upgrading to 10.6.x. I too have this problem now with my Epson Stylus CX6600. This machine has been a real workhorse for me for 6 years and up until this week it has been trouble-free. It prints absolutely fine as usual but the new OS can't 'find' its scan function.
So far I've :
1 Deleted the driver and reinstalled via Software Update
2 System Prefs : Printer/Fax : when I select 'Scan' the queue window opens and reads "No Scanner Selected"
3 Image Capture : "No Scanner or camera selected"
4 Preview : "Epson Stylus CX6600 was disconnected"
No matter what I try my iMac will not recognise the fact that I have a scan option.
I know others have had this problem in the past but the posts remain "unanswered". My assumption is they either fixed it or gave up.
If anyone has the answer, I'd be most appreciative to hear it!
TIA
Joolster
PS : Our MacBook is connected to an Epson Stylus SX215 multifunction - print & scan working perfectly fine on that.
Message was edited by: The Joolster(1) Happily, you can get the 4.1.0 file from the 10.5.8 Combo Update. (I don't know which of the previous updates introduced it — to save time, I looked only in this combo update, the last for Leopard.) Download the standalone installer from the Apple site.
(2) You must also have a file called "EPSON Stylus CX6600.ds", which belongs in "/Library/Image Capture/TWAIN Data Sources/". If it's not there, you can get it from Epson:
(a) Download the file for the CX6600 identified as "TWAIN Driver and EPSON Scan Utility v2.77A", with the filename "epson11802.dmg". It's described at the model's downloads page, and the direct link is "ftp://ftp.epson.com/drivers/epson11802.dmg".
(b) Epson seems to have messed up the content type of the file, or made some other error, because Safari at first tries to open it in the browser as though it's a movie. Give it a minute or two to sort itself out. If it never starts downloading, use an FTP program to get the file.
(c) Once you have it, mount it and run Epson Scan Installer.
(3) Next, go into "/Library/Image Capture/Devices/" and trash the file "Epson Scanner". (Well, you might want to just stash it somewhere else, in case you ever need to use an up-to-date Epson scanner.)
(4) Download a program called Pacifist, if you don't already have it. You will use it to extract from the 10.5.8 Combo Updater only the file that you need.
(5) Open the combo updater in Pacifist, and look for a file called "EPSON Scanner.app". Its location in the combo updater package is "/Library/Image Capture/Devices". Select this file and click the "Install" button in the toolbar.
(6) "EPSON Scanner.app" should now be in your Devices folder. Double-click on it to launch it. (It runs in the background, so you won't see an icon in the dock, but you .)
(7) At this point, you should be able to power up and connect your CX6600, launch Image Capture, and scan as usual. (The EPSON Scan application, which will have been installed in your Applications folder during step 2, if it was not already there, should also function.) -
Illustrator cs4 and Epson Stylus R2880 printing problems
I am having printing problems. I am trying to print from my cs4 to my epson stylus photo printer r2880 and am having problem with my picture getting cut off on the left side when I print. The print screen looks perfect but when I go to print, it always cuts off the left edge and the bottom. I tried playing with the x and y's but have no idea what I am doing. Does anyone have this combination of cs4 with the R2880 printer and can help me solve my problem?
Hi Wade,
I have tried playing around with that but I am not sure what I am doing. Here's what it is set at.
On my drop down print screen, i have the size set as US Letter (Sheet Feeder Borderless (retain size).
When I check the 'fit to page' button it actually puts a bigger white boarder around it. The fit to page number says (96.4706%). Shouldn't it say 100%? If I leave it as do not scale I still have a small border around it.
I am not sure about the xy settings. When I have it to 'fit to page' it is:
Top left corner (0,0) Top right corner (0,0)
Bottom left corner (0, .1632) Bottom right corner (0, .1632)
If I have do not scale button clicked:
Top left corner (0,0) Top right corner (0,0)
Bottom left corner (0, -.225) Bottom right corner is (-.3, -.225)
Do these settings look correct? If not, what should my setting say and how can I set it without the setting changing back everytime I open this window.
Thanks for responding,
Celeste -
Epson stylus Pro 9600 problem printing?
We have 3 Epson stylus pro 9600 connect to LAN network and the latest driver 8.6.1. We have Mac Pro with Lion installed 10.7.4. We tried to print the progress comes up and then it says error. This is what we did to solve the problem: 1. we unplug the LAN Cable and plug directly to the Mac Pro
2. we unplug the the cable from the printer settings still had green light
3. we used IP addresses too
4. we turn off the printer and restarted the Mac
5. it only works with USB. This defeats the purpose of using the LAN.
It seems the printer or Lion does not recognize each other. It won't print!
Any solutions.
Thank you in advance
LuisAdobe blamed Epson drivers for not anticipating CS3's changes. Like they're clairvoyant or something. Their reason was that it was too hard to take into account every printer on the market when writing the new (unasked for) CS3 printing module. A feeble excuse when it comes to Epson pro machinery, though - it is the industry standard, after all.
Solution? - use CS2 for printing, authored back when Adobe wrote its software to be compatible with existing equipment and drivers, not expecting the world to fall into line with whatever it decided it would do. CS2 works flawlessly with my 7800, CS3 remains a basket case for the same reasons you mention, though checking/unchecking the fine detail box makes no difference. CS3 is erratic - sometimes it works as directed, but then out of nowhere it will suddenly decide to attenuate a pano print.
We'll see if they get it right with CS4's "improved" printing, but don't hold your breath. -
HELP! Convert JPG to CMYK for print on Epson Stylus Pro 4880 problems
Hello all!
I need to print a JPG file to an Epson Stylus Pro 4880 printer and keep the original colors. The JPG file is of a company logo containging text/graphic. I use CS5 to convert the file to CMYK and save it as an Adobe PDF. When I print it everything looks good but there is a reddish outline around everything. Anyone have an idea how I can get rid of the outline? I am using the US Coated (SWOP) v2 for the CMYK scheme.
Help! I need to print out some logo tags for the customer.
Thanks in advance, Your assistance will be greatly appreciated.wish I could help but I am Mac and Essentials is not in my work flow!
-
Epson 4180 negative scanning problems - what software to use
I have a MacBook pro retina display and an epson 4180 scanner. I downloaded software from epson but it doesn't seem to work with the scanner. Am I missing something. The back light for the negative scanning will not com on. Is there a different software to use?
PaulYou'll need to contact Epson support.
-
i have a color management problem. I have OS X v 10.5, Adobe Photoshop Elements 6, and an Epson Stylus Photo R800. I want to print images I have scanned on a Epson Perfection 1660 Photo and corrected in Photoshop and get the colors accurate.
I used the ColorSync utility to verify, and it came back with this report:
/Library/Printers/EPSON/InkjetPrinter/PrintingModule/SPR800_Core.plugin/Contents /Resources/ICCProfiles/SPR800 Standard.icc
Tag 'dmnd': Tag size is not correct.
/Library/Application Support/Adobe/Color/Profiles/Recommended/CoatedFOGRA27.icc
Tag 'desc': Tag size is not correct.
/Library/Printers/EPSON/InkjetPrinter/ICCProfiles/Standard.profiles/Contents/Res ources/Epson IJ Printer.icc
Tag 'dmnd': Tag size is not correct.
/Library/Printers/EPSON/InkjetPrinter/PrintingModule/SPR800_Core.plugin/Contents /Resources/
I did not know what to do next. At the bottom of the window it said to go to www.apple.com/colorsync to find a tutorial. I got a message saying that link does not work. Tried to find the tutorial by searching at apple.com, but could not seem to locate it. Does anyone know what the report above means and what I should do about it?
Also, how to find that tutorial?
Re Using RGB all the way through, When I print from Photoshop Elements, I select Adobe RGB, Photoshop Manages under "Color Handling", Relative Colometric under "Intent" and "ColorSync" i the Epson printer box. Do you mean to do something different in this sequence? -
Hi Everybody,
I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan. How do I uninstall the Epson software and start all over again?
nickel_man_65Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd -
Problem with MacBook Air connecting to Epson Stylus sx600fw wirelessly
Hi
I have been trying to set up my new Macbook Air with Epson Stylus sx600fw. Previously this printer was being used via USB with a PC. I have set up the printer on macbook via USB, but under the advice of online resources, erased that and began trying to set it up for wifi use. The printer cannot be found in the Print & Scan section of settings, and when i enter it in manually with IP address, it can find the software to install but gets stuck and says "Unable to verify the printer on your network". After further research i have tried to Ping the printer, which does not work. One thing that i notice is that the Subnet Mask is different than the apple default...for the printer it is 255.255.0.0, where for apple it is 255.255.255.0 but i dont know how to change this
Any advice for where it might be getting stuck or what I can do?
thanks!!!Welcome to the forums @lesleglreglpegl ,
I have a few suggestions for you that might help with the connection problem you're having with connecting your OJ J4680 to your Mac.
Here are the steps:
Mac OS X: How to reset the printing system
Repair disk permissions
Restart the Mac
Re-add the printer (do not use the AirPrint driver)
Good luck to you, have a great Monday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
WIFI scan Epson Stylus Photo PX710W does not work under OS X 10.9 (Mavericks) and
Since yesterday (27/10) i have installed OS X 10.9 (Mavericks) on my iMac. Now there is a problem with my Epson Stylus Photo PX710W. I cannot scan via WIFI. It seems that the problem is with the scan.app version 3.7.1. I can oly scan via USB and cable, but that's not why I bought a WIFI printer/scanner for.
Is there anybody who can offer me a solution for my problem?WE HAVE GOT HIM.
MAVERICKS driver for for wireless scan with EPSON STYLUS PHOTO PX710W.
Available on http://www.epson.nl/nl/nl/viewcon/corporatesite/support
Choose 1 - All in one printers
Choose 2 - EPSON STYLUS PHOTO PX710W
Choose 3 - Mac OS X - Power PC
Confirm selection
CHOOSE Direvers and software
CHOOSE the file EPSON Scan (3.761) - 24,07 MBps - 21-22-2013
Download and install AND BE HAPPY, IT'S WORKING AS BEFORE. -
I have an Epson Stylus 8300 series, and plugged in the USB output of my Airport Extreme, with that I can print without problems from any PC connected to my WiFi network, but can not in any way to scan photos and documents over the network , and every time I need to do this activity, I have to connect my printer directly to the computer. Could someone help me with this problem?
Sorry, but Epson and other manufacturers have not provided full featured drivers that would allow advanced features like copy, scan and maintenance to work when their devices are connected to the USB port on the AirPorts.
Only the print function will work when the All-in-One device is connected to the USB port on the AirPorts.
If you can connect the All-in-One using wireless only or Ethernet, most manufacturers have provided full functionality with these types of network connections. -
Problem with "Epson Stylus SX110 (or SX115)" and the Airport Express
Hello,
I connect my printer on my airport express, via wifi connection. And the airport express doesn't recognize the printer (via the airport express utility)
When I connect my previous printer (a canon), it works well.
Thanks if you met this pb, to help meHi All,
I have intel based macbook pro running OSX 10.6.2, airport express with a connected EPSON Stylus SX115.
I discovered two issues with using the printer via my Airport Express:
1. I had to use the driver called 'Epson Stylus SX 100'. It ships with the op system. (note: NOT the 'Epson SX 100' !!! There is also one called like that, but it does not work for me...). When I tried to use the sx 110 driver, the printing stopped half way. Strange enough the sx 110 driver works ok when the printer is connected via a USB cable
2. Now the more annoying problem.
It takes ages before the airport express discovers the printer!!! After I scanned via an USB cable, I reconnected the printer to the Airport express. Printing was dead. Next I followed the Apple provided troubleshooting (restart sequence, etc). No success, the airport still couldn't find the connected printer, so I was getting really ******…..
The solution I propose, as it worked for me already more than once on my macbook pro, is the following:
1. Connect the printer to the Airport Express, switch the printer on and, and restart AE via the AE utility (Just to make your consciousness rest.):
- Start Airport Utility: you can find the program by typing the name in spotlight
- right click on the on the Icon of your Airport Express on the right of the window
- Issue a restart (It takes some seconds to complete!)
2. WAIT! As annoying it is, it takes about 15-30 min before Airport express discovers the printer.
3. In System Preferences/Print&Fax add the printer: (NOTE: This is an optional step, in case the printer is set up the first time, otherwise skip to step 5. )
- On the right, at the bottom of the Printers sub window, click on the + sign. This opens the Add Printer dialogue
- In the Add Printer dialogue you should be able to see now your Epson printer discovered by Bonjour. Highlight it by clicking on it. (If you don't see your printer, you might have been impatient and waited to little after you connected the printer to the airport express, or you have some problem I did not have…)
- At the bottom open the 'Print Using:' drop-down box, and choose the 'Select Printer' option. This opens a new dialogue. Scroll down to 'Epson Stylus SX 100 - Gutenprint v5.2.3'. Click on it, and press OK. This closes the 'Select Printer' dialogue
- Back at the Add Printer dialogue, change the name of your printer to something more meaningful, to 'Epson SX 115 - Wireless' for example.
- click ad
4. Back at the Print & Fax dialogue, now you should see a new printer icon on the left with the name you just gave, and with an icon that does not look at all like your printer.
5. Congratulations, you are done. You should be able to print now.
I hope it helps -
Problems with Epson Stylus 3000 IP Ethernet
Problems with Epson Stylus 3000 IP Ethernet
The printer stops processing after reaching 1,72% of printing.
The Ethernet Cards led is on and blinking green.
I am running
Powerbook G4
OSX 10.4.5
Epson Stylus Color 3000 + Cups Gimp Print v4.2.7
I can se the printer in Epson MacAssist for OSX Ver 4.0.aE IP 10.0.0.6
I can se it as well in Safari under the ip adress 10.0.0.6
I have tried to test the printer in the Common Unix Printing System
I can see the printer there as well.
A test print here results in
"ipp" stopped unexpectedly with status 1
All my other printers work well and prints test sheets.
The printer has not worked since Tiger.Can you please help me....
I can't seem to get the Print Set up utility to find the Epson Stylus 3000 Gimp.
I installed the GimpPrint Drivers that were on the Tiger 10.4.3 install DVD after I installed 10.4.3, and then updated 10.4.3 to 10.4.5.
When I first installed 10.4.3, I didn't install the GimpPrint Drivers. I went back to the DVD after updating to 10.4.5, and then installed the GimpPrint Drivers.
Can you please help me out in what I'm doing wrong. Everytime I try to find the Epson Drivers an "error:-50" comes up in the Printer Browser under IP Printer section.
Here's what I'm doing:
- I go into Printer Setup Utility
- I choose Add Printer
- I choose IP Printer
- I choose Line Printer Daemon - LPD
- I pop up the "Print using" and select the "EPSON".
- Then I choose "EPSON Stylus Color 3000 - Gimp-Print v5.0.0-beta2
- THEN I GET AN ERROR MESSAGE POP-UP! "An error occurrd while trying to add the selected printer. Error:-50"
Where did you find the:
Epson Stylus Color 3000 + Cups Gimp Print v4.2.7
Thank you for you help in advance!
Micdim
G4 Dual 1.42 gig Mac OS X (10.4.5) 1G Ram, FCStudio, Logic Pro 7.1, Adobe CS2, After Effects 7, MSOffice 2004...
Maybe you are looking for
-
I want to format my C drive. If I run recovery from the partitioned D drive will this be accomplished. Thanks
-
How to copy and pasting of the web catlog in OBISE1?
hi, The usage tracking dashboard is created and while enabling it, it means copying the usage catlog folder from offline mode to the online mode -shared folder, its not copying...and throws an error msg: as "destination and source are same". plz find
-
Can't download Oracle 9i Database Server for SUN Solaris 32 bit platform
I was not able to download Oracle 9.2.0 DB Server for Sun Solaris 32 bit platform from OTN site this morning. Could someone please take a look at it? Thanks, Wen Davis
-
How we can copy the Log of Batch input that we have executed through T-Code SM35.
-
hi all. sorry i got one small doubt is here in my scenario i have to send data from 2 diferent file snders to one bapi. i developed the interface in xi and its working so i need to check the table in bapi and iam having acess too to check that bapi