Epson Stylus NX230 software unavailable

I am trying to add my Epson Stylus NX230 printer. This printer has previously been available through this computer. I took it off because it was acting up and I wanted to restart it. However, when I went to add the printer back on a new message comes up saying that the software is currently unavailable from apple. I have downloaded the newest Epson software update from apple. I am just confused as to why this is happening when it worked previous.

Contact Epson tech support. 

Similar Messages

  • HT204266 How to install an epson stylus nx230 printer on my iPad?

    How do I install a wireless printer for my iPad?

    You need to have a compatible version of iOS and an AirPrint compatible printer. Check HERE for details.
    Alternatively, you can run the fantastic PRINTOPIA to print to non-compatible printers using your Mac as a print server.

  • Epson Stylus Pro 5000 & Leopard

    Can I print directly from my MacPro 3GHz to my network printer Epson Stylus Pro 5000 and get top quality results. I used to have it setup using my old PowerBook G4 Ti laptop running OS9 and Stylus RIP Software.... but I purchased a new MBP with Leopard on it so I gave my PowerBook Ti to my father with Tiger running on it. I see in the support notes that Leopard comes with Gimp drivers for the Stylus Pro 5000, but when I add the printer and GIMP drivers to my print network the quality of the printouts is by no way near what it was when running the Stylus RIP software on my old OS9 laptop... does anyone have a similar problem? I was going to just go away and buy another more up to date printer e.g. the Epson R2400, but the 9 ink cartridges at 13ml each sounds very uneconomical to run... and besides... there's nothing at all wrong with my Epson Stylus Pro 5000 with 110ml cartridges... I just need to get it to work using Leopard on my MacPro 3GHz.
    Any comments / ideas most welcome...
    Yours sincerely,
    Irish MacUser & MacAddict

    Hi there Kappy and thank you for your excellent suggestion... on arriving at the website I could see it held the perfect solution, but I could not see my printer listed on the supported printers list... so I have emailed them to see if it may be a pending supported printer.... but thanks again for your excellent suggestion... I have it working direct now without a RIP using the Gimp driver... but it's painstakingly slow and the colour matching isn't as good as it was using the proper Epson Pro 5000 Driver with the Epson Stylus RIP software...
    Always something in the bloody business...lol..lol
    Thanks again...

  • HT1341 Epson Stylus SX435W otherwise known as Workforce 435. Although Apple promises software drivers on-line attempts at downloading and ADDING repeatedly come up with drop down menu "...it is not currently available from the software server". Please hel

    Epson Stylus SX435W otherwise known as Workforce 435. Adding Driver to an iMac
    Although Apple promises software drivers on-line, my attempts at downloading and ADDING it to my iMac
    repeatedly come up with drop down menu "...it is not currently available from the  Software update server". Please help?
    I have downloaded all the Epson Printer Software but I cannot make the final step.

    Reset the printing system and then try adding the printer again.
    http://support.apple.com/kb/ht1341
    (You have installed, not just downloaded the Epson driver, right?)

  • TS3147 Can't install the software for the EPSON Epson Stylus Photo R2000 because it is not currently available from the Software Update server.

    Can't install the software for the EPSON Epson Stylus Photo R2000 because it is not currently available from the Software Update server???
    I am using mac osx 10.8 and now cant get print software for epson R2000 printer.

    After system update, my Epson Stylus SX 535WD was ''gone''. I tried in vain to add it as an IP printer (got the IP-address from the printer). The printer model is correctly recognized, software download starts -- but then  the "software ... is not currently available..."
    Resetting  the printing system did not help. Downloading Epson Printer Drivers v2.15.1 from  here
    did not help either, downloading Epson Printer Drivers.
    In the end, I re-installed the printer software from the original CDs. After that the printer showed up as a Bonjour Printer, and I could add it without problem.
    But note: although the printer is installed now and working properly, I still get the old error message (...software ..not available...) if I try to add the printer as an IP printer !?

  • After installing the last software update, my printer (an Epson Stylus Photo R1800) immediately ceased to function. How do I fix this?

    After installing the last software update, my printer (an Epson Stylus Photo R1800) immediately ceased to function. How do I fix this?

    Try resetting the printing system.
    Reset Printing System
    Network printer or attached to the computer?

  • Epson Stylus CX7300 will not print after software update

    After doing the latest update for my Epson Stylus CX7300 printer it will not print.  When i open the printer utility it comes up with a communication error.  I can still scan documents but i can't print or even print a test page, check ink levels etc.

    Hi Kerry Bonney,
    Welcome to the Apple Support Communities!
    If you are having issues printing after running a software update I would recommend using the troubleshooting steps in the following article. It sounds like you have already completed some of these steps, but I would recommend reading over and working through the steps provided in this article.
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/TS3147
    Have a great day,
    Joe

  • Epson Stylus Photo 2200 RIP Software errors

    I'm at my wit's end! For no apparent reason, I cannot print to my Epson Stylus Photo 2200 with my Stylus RIP Pro 2.0 PS server software from either of my 2 computers--I get the same problems from both computers. I have a Dual 1 GHz PowerPC G4 running Mac OS 10.4.7 and a new 2x2.66 GHz Dual-Core Intel Xeon running 10.4.8. I'm trying to print from Illustrator CS2. Several different things are happening when I print the job.
    a) It sends the print job to print far too quickly. Sometimes it times out and never even appears in the 127.0.0.1 window, and doesn't send it to the RIP. The job simply disappears. When it does send to the printer, it stops the job, putting it on hold and when I click start jobs, it promptly stops it again and this repeats itself going nowhere.
    I gave up, unplugged it, disconnected the USB, plugged it all back in, repaired permissions to both computers, restarted and then tried to print again and then:
    b) In the printer list the job shows up as first printing to the RIP (127.0.0.1) for a few seconds, then it quickly bounces to the next printer on my list, an HP laser jet???!!!
    I've uninstalled and reinstalled both the RIP software and the 2200 in printer setup utility and on both systems. All the files I'm trying to print will print directly to the 2200, just not through the RIP software, so I know it's communicating. The files will all print to my other printers as well, but I need to print them to the 2200 with the RIP for best quality.
    When I launch the RIP software, sometimes--but not every time--I immediately get a PS server error that says: EPSONLPRService EPSONLPRService error. This happens on both computers. I have received no help from Epson whatsoever. I run a business and I must print this job. Anyone have any thoughts? Thanks!!!
    Dual 1 GHz PowerPC G4 & 2x2.66 GHz Dual-Core Intel Xeon 10.4.8   Mac OS X (10.4.7)  

    Thnx for the reply. I think I have a better understanding of your setup. I was thinking that you had a physical RIP, rather than it being software. That would explain why you are using the loopback address to view the spool area of the RIP.
    However, could you confirm some more. Is the Epson physically connected to one Mac via USB or is it network with its own IP address?
    You also mention in your original post a HP printer jobs were switching to. Is this an Ethernet or USB printer?
    The reason I ask is that I was thinking that if they were both networked then there may be an addressing issue. As a test I would change the RIP software so that only the Epson printer is spooled to.
    I would also only print from TextEdit. The CS2 suite is not an ideal test app, unless it is only the suite you are having trouble printing from.
    I know that you have already performed a repair permissions, but I would do it after booting from the OS X disc. I'm guessing the RIP software acts as a service and starts on boot. If you boot from the disc, the service won't have started and therefore it will respond to any attempt by the system to repair it.
    The other thing I would try is downloading the full 10.4.8 Combo updater for Intel and PPC and run this on both Mac's respectively.
    Also, check that you have correct queue names for the LPD queue. This can cause jobs to behave as you mention. Better still, see if the software supports some other protocol such as Raw (Port 9100). If it does then you can connect using the HP Jet Direct-Socket to see if that works.
    Regards,
    Paul

  • HT1338 How do I get a driver for my Epson Stylus Photo 1400 so that it will run with Mountain LIon?  I tried "Software Update" and says "no update available"

    How do I get a driver for my Epson Stylus Photo 1400 so that it will run with Mountain LIon?  I tried "Software Update" and says "no update available".  I contacted Epson and was told all driver updates had to be obtained using "Software Update"?

    You will find the latest Epson drivers herehttp://support.apple.com/kb/DL1398.
    If you don't find a driver for your printer in the above, then install the Gutenprint drivers. It supports your model.

  • Can't print to Epson Stylus

    iMac Intel
    Mac OSX 10.6.8
    Epson Stylus Photo T60 (USB connection)
    Printed fine last night, as it has ever since I bought it a couple of years ago. This morning suddenly does not print.
    Troubleshooting done so far:
    1. Turned off printer, restarted and tested: no go.
    2. Restarted computer, tested: no go.
    3. Tested printing from macbookpro using same cable: prints fine; hence cable works, printer works.
    4. Tested iMac USB port with scanner: communicates with scanner, USB port is ok.
    5. Tried restoring system > library > Printers from Time Machine set to last night (when it last worked), and tested: no go.
    6. Deleted printer from print settings and reinstalled, tested: no go.
    Please can anyone help me interpret console's printer log?  Or otherwise pinpoint the problem and help me with a solution?  Many thanks in advance!
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] The following messages were recorded from 12:31:46 to 12:38:26
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] Adding start banner page "none".
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] Queued on "EPSON_Epson_Stylus_Photo_T60" by "das".
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] Auto-typing file...
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] Request file type is application/vnd.cups-banner.
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] File of type application/vnd.cups-banner queued by "das".
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] Adding end banner page "none".
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] job-sheets=none,none
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] argv[0]="EPSON_Epson_Stylus_Photo_T60"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] argv[1]="2632"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] argv[2]="das"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] argv[3]="testprint"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] argv[4]="1"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] argv[5]="AP_ColorMatchingMode=AP_VendorColorMatching AP_D_InputSlot= nocollate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMJobName=testprint com.apple.print.PrinterInfo.PMColorDeviceID..n.=38657 com.apple.print.PrintSettings.PMColorSyncProfileID..n.=282 com.apple.print.PrintSettings.PMCopies..n.=1 com.apple.print.PrintSettings.PMCopyCollate..b. com.apple.print.PrintSettings.PMFirstPage..n.=1 com.apple.print.PrintSettings.PMLastPage..n.=2147483647 com.apple.print.PrintSettings.PMPageRange..a.0..n.=1 com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647 media=A4 pserrorhandler-requested=standard job-uuid=urn:uuid:1e95c1ac-e074-3537-6319-929ed8ada5aa job-originating-host-name=localhost time-at-creation=1407558706 time-at-processing=1407559105 PageSize=A4"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] argv[6]="/private/var/spool/cups/d02632-001"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[0]="<CFProcessPath>"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[2]="CUPS_DATADIR=/usr/share/cups"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[8]="CUPS_STATEDIR=/private/etc/cups"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[9]="HOME=/private/var/spool/cups/tmp"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[11]="SERVER_ADMIN=root@localhost"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[12]="SOFTWARE=CUPS/1.4.7"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[14]="USER=root"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[15]="CUPS_SERVER=/private/var/run/cupsd"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[16]="CUPS_ENCRYPTION=IfRequested"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[17]="IPP_PORT=631"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[18]="CHARSET=utf-8"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[19]="LANG=en_US.UTF-8"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[20]="APPLE_LANGUAGE=en-US"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[21]="PPD=/private/etc/cups/ppd/EPSON_Epson_Stylus_Photo_T60.ppd"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[22]="RIP_MAX_CACHE=8m"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[23]="CONTENT_TYPE=application/vnd.cups-banner"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[24]="DEVICE_URI=usb://EPSON/Epson%20Stylus%20Photo%20T60?serial=4C43594B30 35303666"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[25]="PRINTER_INFO=EPSON Epson Stylus Photo T60"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[26]="PRINTER_LOCATION=iMac-iDol"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[27]="PRINTER=EPSON_Epson_Stylus_Photo_T60"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[28]="CUPS_FILETYPE=document"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] envp[29]="FINAL_CONTENT_TYPE=printer/EPSON_Epson_Stylus_Photo_T60"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] Started filter /usr/libexec/cups/filter/cgbannertopdf (PID 597)
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] Started filter /usr/libexec/cups/filter/cgpdftoraster (PID 598)
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] Started filter /usr/libexec/cups/filter/rastertoepson (PID 599)
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] Started backend /usr/libexec/cups/backend/usb (PID 600)
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] usb: AppleLanguages="en-US"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] STATE: +connecting-to-device
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] Looking for 'EPSON Epson Stylus Photo T60'
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] load_classdriver(/System/Library/Printers/Libraries/USBGenericTOPrintingClass.p lugin) (kr:0x00000000)
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] Opening connection
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] load_classdriver(/System/Library/Printers/Libraries/USBGenericTOPrintingClass.p lugin) (kr:0x00000000)
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] STATE: -connecting-to-device
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] Sending print data...
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] Set job-printer-state-message to "Sending print data...", current level=INFO
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] load_banner(filename="/private/var/spool/cups/d02632-001")
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] cgpdftoraster - copying to temp print file "/private/var/spool/cups/tmp/0025653ee363c"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] Page = 595x842; 9,40 to 586,816
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] `/private/var/spool/cups/tmp/0025653ee363c' has 1 pages.
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] cgpdftoraster - opened PPD file "/private/etc/cups/ppd/EPSON_Epson_Stylus_Photo_T60.ppd"...
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] cgpdftoraster: size->width = 595, size->length = 842, size->top = 816.49, size->bottom = 39.6, size->left = 8.6, size->right = 586.4
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] cgpdftoraster: PreferredRotation = 90
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] Set job-printer-state-message to "cgpdftoraster unsupported colorSpace: colorSpace = -1, colorOrder =1, bitsPerColor = 1", current level=ERROR
    D [09/Aug/2014:12:38:26 +0800] [Job 2632]
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] Read 31 bytes of print data...
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] Wrote 31 bytes of print data...
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] Sent 31 bytes...
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] End of messages
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] printer-state=3(idle)
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] printer-state-message="No pages found!"
    D [09/Aug/2014:12:38:26 +0800] [Job 2632] printer-state-reasons=none
    E [09/Aug/2014:12:38:26 +0800] [Job 2633] cgpdftoraster unsupported colorSpace: colorSpace = -1, colorOrder =1, bitsPerColor = 1
    E [09/Aug/2014:12:38:26 +0800] [Job 2633] cgpdftoraster: cupsRasterInterpretPPD had an error: Page header callback returned error.
    E [09/Aug/2014:12:38:26 +0800] [Job 2633] No pages found!
    E [09/Aug/2014:12:38:26 +0800] [Job 2633] Job stopped due to filter errors; please consult the error_log file for details.
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] The following messages were recorded from 12:37:16 to 12:38:26
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] Adding start banner page "none".
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] Queued on "EPSON_Epson_Stylus_Photo_T60" by "das".
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] File of type application/pdf queued by "das".
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] Setting job-hold-until to no-hold
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] Adding end banner page "none".
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] Job released by user.
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] job-sheets=none,none
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] argv[0]="EPSON_Epson_Stylus_Photo_T60"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] argv[1]="2633"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] argv[2]="das"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] argv[3]="Untitled"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] argv[4]="1"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] argv[5]="AP_ColorMatchingMode=AP_VendorColorMatching AP_D_InputSlot= APCustomColorMatchingProfile=sRGB ApplicationBundleName=TextEdit nocollate ColorModel=RGB com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMApplicationName=TextEdit com.apple.print.JobInfo.PMJobName=Untitled com.apple.print.JobInfo.PMJobOwner=Das com.apple.print.PageToPaperMappingMediaName=A4 com.apple.print.PageToPaperMappingType..n.=1 com.apple.print.PrinterInfo.PMColorDeviceID..n.=38657 com.apple.print.PrintSettings.PMColorSpaceModel..n.=2 com.apple.print.PrintSettings.PMColorSyncProfileID..n.=285 com.apple.print.PrintSettings.PMCopies..n.=1 com.apple.print.PrintSettings.PMCopyCollate..b. com.apple.print.PrintSettings.PMDestinationType..n.=1 com.apple.print.PrintSettings.PMFirstPage..n.=1 com.apple.print.PrintSettings.PMLastPage..n.=2147483647 com.apple.print.PrintSettings.PMPageRange..a.0..n.=1 com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647 cupsBorderlessScalingFactor=1.00 DestinationPrinterID=EPSON_Epson_Stylus_Photo_T60 EPIJ_ACam=0 EPIJ_AFil=0 EPIJ_AGai=1 EPIJ_APFPrvID=7 EPIJ_APri=1 EPIJ_ATon=7 EPIJ_Bi_D=1 EPIJ_Bidi_Com=1 EPIJ_Brit=0 EPIJ_BSSv=0 EPIJ_CCor=3 EPIJ_CMat=0 EPIJ_Cont=0 EPIJ_Cyan=0 EPIJ_DCCT=0 EPIJ_DoneOpnr=0 EPIJ_ECAv=0 EPIJ_ENAL=1-1_2-1_3-1_4-1 EPIJ_ERGB=0 EPIJ_exmg=2 EPIJ_ExMgnAlK=1 EPIJ_ExtStAlK=0 EPIJ_Gamm=0 EPIJ_HdofClSp=0 EPIJ_Hori=0 EPIJ_Ink_=1 EPIJ_Mage=0 EPIJ_Manu=0 EPIJ_Medi=0 EPIJ_Mode=0 EPIJ_OSCMProf=1 EPIJ_OSColMat=1 EPIJ_PageRegion=A4 EPIJ_PageSize=A4 EPIJ_PGEx=0 EPIJ_PrStgAlK=0 EPIJ_PSrc=2 EPIJ_Qual=43 EPIJ_REye=0 EPIJ_Satu=0 EPIJ_Silt=0 EPIJ_Size=1 EPIJ_UEpL=0 EPIJ_Yell=0 EPIJClientInfo=1 EPIJProfileSpec=1 EPIJSharedClient=0 EPIJSystemLanguage=en EPSON.PrintModule.Setting.ApplicationPageRect..a.0=0.00000000000000 EPSON.PrintModule.Setting.ApplicationPageRect..a.1=0.00000000000000 EPSON.PrintModule.Setting.ApplicationPageRect..a.2=783.00000000000000 EPSON.PrintModule.Setting.ApplicationPageRect..a.3=559.00000000000000 EPSON.PrintModule.Setting.ApplicationPaperRect..a.0=-18.00000000000000 EPSON.PrintModule.Setting.ApplicationPaperRect..a.1=-18.00000000000000 EPSON.PrintModule.Setting.ApplicationPaperRect..a.2=824.00000000000000 EPSON.PrintModule.Setting.ApplicationPaperRect..a.3=577.00000000000000 EPSON.PrintModule.Setting.Encoding..n.=0 EPSON.PrintModule.Setting.HostName=iMac-iDol EPSON.PrintModule.Setting.PrinterName=EPSON\ Epson\ Stylus\ Photo\ T60(2,0) EPSON.PrintModule.Setting.SystType..n.=3072 media=A4 MediaType=0 PaperInfoIsSuggested..b. PDEChangeControl= PDEiPhotoPreset..n.=0 PDEOpenHelpCount..n.=0 PDEOpenHideOption..n.=0 PDEOpenPane..n.=0 pserrorhandler-requested=standard Resolution=360x360dpi job-uuid=urn:uuid:7e5d2122-79bf-3b10-67ba-520f80133b82 job-originating-host-name=localhost time-at-creation=1407559036 time-at-processing=1407559106 job-impressions=1 com.apple.print.PrintSettings.PMTotalSidesImaged..n.=1 com.apple.print.PrintSettings.PMTotalBeginPages..n.=1 PageSize=A4"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] argv[6]="/private/var/spool/cups/d02633-001"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[0]="<CFProcessPath>"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[2]="CUPS_DATADIR=/usr/share/cups"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[8]="CUPS_STATEDIR=/private/etc/cups"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[9]="HOME=/private/var/spool/cups/tmp"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[11]="SERVER_ADMIN=root@localhost"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[12]="SOFTWARE=CUPS/1.4.7"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[14]="USER=root"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[15]="CUPS_SERVER=/private/var/run/cupsd"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[16]="CUPS_ENCRYPTION=IfRequested"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[17]="IPP_PORT=631"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[18]="CHARSET=utf-8"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[19]="LANG=en_US.UTF-8"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[20]="APPLE_LANGUAGE=en-US"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[21]="PPD=/private/etc/cups/ppd/EPSON_Epson_Stylus_Photo_T60.ppd"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[22]="RIP_MAX_CACHE=8m"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[23]="CONTENT_TYPE=application/pdf"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[24]="DEVICE_URI=usb://EPSON/Epson%20Stylus%20Photo%20T60?serial=4C43594B30 35303666"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[25]="PRINTER_INFO=EPSON Epson Stylus Photo T60"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[26]="PRINTER_LOCATION=iMac-iDol"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[27]="PRINTER=EPSON_Epson_Stylus_Photo_T60"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[28]="CUPS_FILETYPE=document"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] envp[29]="FINAL_CONTENT_TYPE=printer/EPSON_Epson_Stylus_Photo_T60"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] Started filter /usr/libexec/cups/filter/cgpdftoraster (PID 603)
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] Started filter /usr/libexec/cups/filter/rastertoepson (PID 604)
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] Started backend /usr/libexec/cups/backend/usb (PID 605)
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] `/private/var/spool/cups/d02633-001' has 1 pages.
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] cgpdftoraster - opened PPD file "/private/etc/cups/ppd/EPSON_Epson_Stylus_Photo_T60.ppd"...
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] cgpdftoraster: size->width = 595, size->length = 842, size->top = 816.49, size->bottom = 39.6, size->left = 8.6, size->right = 586.4
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] cgpdftoraster: PreferredRotation = 90
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] Set job-printer-state-message to "cgpdftoraster unsupported colorSpace: colorSpace = -1, colorOrder =1, bitsPerColor = 1", current level=ERROR
    D [09/Aug/2014:12:38:26 +0800] [Job 2633]
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] usb: AppleLanguages="en-US"
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] STATE: +connecting-to-device
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] Looking for 'EPSON Epson Stylus Photo T60'
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] load_classdriver(/System/Library/Printers/Libraries/USBGenericTOPrintingClass.p lugin) (kr:0x00000000)
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] Opening connection
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] load_classdriver(/System/Library/Printers/Libraries/USBGenericTOPrintingClass.p lugin) (kr:0x00000000)
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] STATE: -connecting-to-device
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] Sending print data...
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] Read 31 bytes of print data...
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] Wrote 31 bytes of print data...
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] Sent 31 bytes...
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] End of messages
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] printer-state=3(idle)
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] printer-state-message="Sending print data..."
    D [09/Aug/2014:12:38:26 +0800] [Job 2633] printer-state-reasons=none
    E [09/Aug/2014:12:45:15 +0800] [Job 2634] Stopping unresponsive job!
    E [09/Aug/2014:12:52:05 +0800] [Job 2635] Stopping unresponsive job!
    E [09/Aug/2014:12:52:06 +0800] [Job 2636] Job stopped due to filter errors; please consult the error_log file for details.

    Still not printing.
    In the meantime have done the following: --
    1. Launched terminal, typed sudo chmod a+x /usr/libexec/cups/backend/*, followed with pw when prompted, then quit terminal.
    Tested printer: no go. Printer setting shows "In use, last used". Printer dialog says "waiting for printer to become available".
    2. Launched terminal, typed ls -l /usr/libexec/cups/backend.
    This is the list:
    total 2992
    lrwxr-xr-x  1 root  admin       69 Jan  2  2013 HP-Fax -> /Library/Printers/hp/Fax/HPFaxBackend.app/Contents/MacOS/HPFaxBackend
    -rwxr-xr-x  1 root  wheel   122384 Jun  8  2011 bluetooth
    lrwxr-xr-x  1 root  wheel      109 Jan  2  2013 canonijnetwork -> ../../../../Library/Printers/Canon/BJPrinter/Plugins/BJNP/canonijnetwork.bundle /Contents/MacOS/canonijnetwork
    -rwx--x--x  1 root  wheel    57344 Jul 13  2011 dnssd
    -rwxr-xr-x  1 root  wheel    63296 Jun 12 19:47 epsonfirewire
    lrwxr-xr-x  1 root  wheel       68 Jan  2  2013 fax -> ../../../../System/Library/Printers/Libraries/Fax/Contents/MacOS/Fax
    lrwxr-xr-x  1 root  wheel        3 Jan  2  2013 http -> ipp
    -rwx--x--x  1 root  wheel   106096 Jul 13  2011 ipp
    -rwx--x--x  1 root  wheel    93024 Jul 13  2011 lpd
    lrwxr-xr-x  1 root  wheel        5 Jan  2  2013 mdns -> dnssd
    -rwxr-xr-x  1 root  wheel    73812 May  6  2008 pdf800
    -rwxr-xr-x  1 root  wheel    61008 Oct 26  2010 riousbprint
    -r-x--x--x  1 root  wheel  2796752 Apr 13  2012 smb
    -r-xr-xr-x  1 root  wheel    66576 Jul 13  2011 snmp
    -r-xr-xr-x  1 root  wheel    79328 Jul 13  2011 socket
    -r-xr-xr-x  1 root  wheel    91792 Jul 13  2011 usb
    3. Reset printing system.
    Tested printer: no go.
    In the meantime, the iMac is printing to HP Laserjet 6MP (appletalk connected to iMac's USB).

  • Epson stylus CX5500 - scanning size

    Hi,
    I having problems with my all in one printer and scanner (Epson stylus CX5500). I can open the scanning program in both printers and faxes and image capture, and the 'overview scan' is fine and captures the whole document/image but when it does the analysing scan it separates the document and only scans and saves certain sections of the document/image. The 'detect separate items' is not selected. Only getting bits and pieces of a document is very frustrating.
    Open to any relevant suggestions
    Thanks.
    Message was edited by: embren

    What software are you using to scan with?

  • I am unable to print anything since installing the latest driver for my epson stylus rx640. I have followed epson's advice by doing repair permissions, but I still can't print anything. Can anybody suggest anything?

    Can't print with my Epson stylus RX 640 since the latest apple software update for epson. Since then I completely reinstalled the printer following epson's advice. It worked. But today, I am trying to print some photos and nothing happens. Epson suggest resetting and then doing some repair permissions. Done that and still no joy. Can anyone help please.

    contact Epson again and ask them about using a generic Gutenprint driver; I read in one of the threads here - but can't find it right now - about a problem with your model printer. Since Epson has not updated its driver to work with SL on this older model, it appears using a generic driver does work. You might also try searching for those threads by typing your model number into the search box.

  • I just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer?

    i just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer? i have downloaded the 3800 software three times and the imac keeps telling me there is no software to run the printer? Any help here?

    Care to share which OS you are using?

  • I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan

    Hi Everybody,
    I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan.  How do I uninstall the Epson software and start all over again?
    nickel_man_65

    Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
    Someone on this forum suggested, that USB3 may interfere with the magic mouse.
    I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
    Thanks for the advice, Bee
    Cheers, Gerd

  • Epson Stylus Photo R320 Won't show in OS 9.2.2 Chooser

    I just purchased an Epson Stylus Photo R320, primarily to print on CDs and DVDs. This fancy new inkjet replaced my dependable Epson C-86. My problem is that after installing the Epson printing software on my G5 2.0, I can print, as usual, great in 10.4.5, but now, not in OS9.2.2 anymore. The R320 icon shows up in the left side of the Chooser, but when I select it, nothing shows up on the right side. I really don't want to go back to my C-86 since it doesn't print on CD/DVD media and I still use some old OS9 software that still works great but now won't print. I've done all the little things one might expect (i.e., throw away prefs, reinstall OSX and OS9, reinstall only OS9, permissions, etc.) but to no avail. I even reinstalled the OSX software. Nothing.
    Any thoughts on this?

    Hello 64M,
    Is Chooser showing your USB bus or is it showing the default Modem or Printer port Setting?
    Jeff

Maybe you are looking for

  • Need to get the Last Changed date in Purchase Order.

    Dear Experts, I need to get a table which stores the last/ latest change for a Purchase Order. For a Purcahse Order, last date  Changes need to be captured , where there was some sort of activity associated with that order. That activity could be a g

  • Disappearing Code

    I frankly dont know if this is an HTML or PHP or MySQL issue, but I have created a template, then created a child page, the content in the editable region is called from a MySQL DB using PHP, however all code below the php script does not make it to

  • Mail Is Only a "MIME Attachment"

    I'm away from home trying to get by on an iPod touch standing in for a laptop. One e-mail I received, forwarded (at least) by one AOL user, consists of nothing but a "mime-attachment". I believe I've seen similar things in e-mail on Mail for OS X, bu

  • Xhtml validation - i dont understand error

    Hi All I have created a site called www.monicawellsphotography.net I have been following the flash satay method for the flash movies, along with dreameavers active content script - i tested my page including the validation and everything checked out

  • Oversea opportunity in SD/XI/BW.

    Hello all, Am an ABAPer with one and half years of experience. 1)Which one of these three is best so that  i a have maximum onsite(oversea) opportunities and my ABAP knowledge is utilised. 2)Can somebody tell me how and to what extend(Percantage wise